#hazzy | Logs for 2018-07-18
Back
[00:00:30] <hazzy-lab> Hey, were did G38.6 come from? LCNC only has up to G38.5
[00:00:46] * hazzy-lab is getting distracted, lol
[00:01:45] <lcvette[m]2> I noticed that
[00:01:51] <lcvette[m]2> To must have added it
[00:02:00] <lcvette[m]2> They
[00:02:10] <lcvette[m]2> I'm curious what it is
[00:02:21] <hazzy-lab> So am I!
[00:02:40] <lcvette[m]2> Iput it in The ether pad
[00:03:09] <hazzy-lab> Ah, I think all they are doing with the workspace it checking the that the probe will stay within the machine limits
[00:05:24] <hazzy1[m]> no, thats not right, because it is uesd to calc x_min
[00:05:57] <hazzy1[m]> hmm
[00:06:09] <lcvette[m]2> Yeah those are strange to me too
[00:09:27] <hazzy-lab> G38.6 – move away from the workpiece ignoring probe input
[00:09:49] <hazzy-lab> why not use G1? LOL
[00:11:08] <lcvette[m]2> Oh..... Maybe they are using it in reverse?
[00:11:41] <lcvette[m]2> Letting it probe while triggered looking for it to trigger by interfering?
[00:11:54] <lcvette[m]2> Untriggering
[00:12:10] <hazzy-lab> But if it ignores probe input, so its not a probing move xD
[00:12:21] <hazzy-lab> I don't get it
[00:12:45] <lcvette[m]2> Think I actually witnessed
[00:12:52] <lcvette[m]2> That in one of their videos
[00:12:56] -HaikuBot[m]:#hazzy- But if it ignores
[00:12:57] -HaikuBot[m]:#hazzy- probe input, so its not
[00:12:57] -HaikuBot[m]:#hazzy- a probing move xD
[00:13:20] <hazzy-lab> it had trouble deciding it that was worthy lol
[00:13:45] <hazzy-lab> HaikuBot[m]: Am I a poet?
[00:13:54] <hazzy-lab> :(
[00:14:06] <lcvette[m]2> Ignores so it can move while triggered but stops when untrkggeted
[00:14:08] <lcvette[m]2> Lol
[00:14:35] <hazzy-lab> That might be what its for
[00:14:54] <hazzy-lab> That is the only thing that would make any sense
[00:15:26] <hazzy-lab> Unless it is a lazy way of debouncing the probe input ...
[00:19:49] <lcvette[m]2> Maybe
[00:19:55] <lcvette[m]2> Sounds about right
[00:20:09] <lcvette[m]2> Think I'll use it to, good idea
[00:21:17] <lcvette[m]2> May allow you to use a faster rapid?
[00:22:19] <lcvette[m]2> Move etc so the tip doesn't spring back and rock the other way off the trips after it closes
[00:22:28] <hazzy-lab> Oh, good thought!
[00:23:00] <hazzy-lab> I bet the is exactly the reason
[00:23:16] <lcvette[m]2> We are gonna be probin high speed like the pros!!!
[00:23:24] <hazzy-lab> lol
[00:24:18] <hazzy-lab> I called the new probe GUI TurboProbe for fun, so we better make it stand up to its name :)
[00:24:42] <lcvette[m]2> Sweet
[00:26:05] <hazzy-lab> I originally called it TurBoPobre, but thought in case it stuck I should change it xD
[00:26:33] <lcvette[m]2> Lol
[00:26:36] <lcvette[m]2> Yeah good idea
[00:26:50] <lcvette[m]2> Is there anything called turbo probe?
[00:27:15] <lcvette[m]2> Think I remember that name from my research years ago
[00:27:21] <hazzy-lab> I don't know, hmm
[00:27:53] <hazzy-lab> First hit, lol: https://en.wikipedia.org
[00:29:00] <hazzy-lab> I forgot about TurboCNC!
[00:30:34] <lcvette[m]2> Yeah turbo CNC was what I must have been thinking about
[00:35:07] <hazzy-lab> https://youtu.be
[00:35:36] <hazzy-lab> It verks!
[00:37:36] <lcvette[m]2> That's good stuff right there!!
[00:38:12] <lcvette[m]2> This is so flipping cool!!!!!!!!!
[00:38:53] <hazzy-lab> Thanks!
[00:40:12] <hazzy-lab> This is what the sub looks like cleaned up a bit: http://dpaste.com
[00:43:02] <hazzy-lab> Spam on the way
[00:43:56] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson deleted project branch MSMProbe at Hazzy / SubCaller ( https://gitlab.com )
[00:43:57] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / SubCaller ( https://gitlab.com )
[00:43:58] <hazzy-lab> maybe
[00:44:01] <hazzy-lab> yes!
[00:44:05] <hazzy-lab> xD
[00:46:27] <hazzy-lab> gn8
[00:51:01] <lcvette[m]2> Nice!!
[00:51:12] <lcvette[m]2> Still named msm. :0
[00:54:44] <lcvette[m]2> That's awesome man so just awesome!
[00:55:17] <lcvette[m]2> Man that code looks frightening in that GitHub link
[00:55:20] <lcvette[m]2> Lol
[01:16:28] -!- hazzy-lab has quit [*.net *.split]
[01:35:13] -!- hazzy-lab has joined #hazzy
[08:29:14] -!- Roguish has joined #hazzy
[08:33:32] -!- Roguish has quit [Client Quit]
[08:34:04] -!- Roguish has joined #hazzy
[11:06:43] <hazzy-lab> morning
[11:12:33] <Lcvette[m]> morning
[11:17:42] <Lcvette[m]> i was falling asleep last night and pondering probe calibration
[11:25:19] <hazzy-lab> great! I don't know how that is normally done, just by offsets?
[11:32:14] <Lcvette[m]> well thats what i was pondering
[11:33:19] <Lcvette[m]> wondering how we could get a calibration offset for X+, X-, Y+, Y-
[11:34:15] <Lcvette[m]> those are the 4 main quadrants probed for accuracy most often
[11:34:19] <Lcvette[m]> locating etc
[11:35:12] <hazzy-lab> Oh, thats right, offsets will only give you X+ Y+ calibration
[11:35:22] <Lcvette[m]> i know tormach has a calibration method but i did a quick search and couldn't find it again
[11:35:57] <Lcvette[m]> still looking
[11:36:01] <Lcvette[m]> for it
[11:36:20] <hazzy-lab> Hmm, maybe there could be two probe tools in the tooltable, one with offsets for + probing, and another for - probing
[11:37:37] <hazzy-lab> Or maybe we could use the UVW offsets in addition to the XYZ offsets ....
[11:37:56] <Lcvette[m]> thats an interesting thought
[11:39:35] <Lcvette[m]> i came across this when i hit the calibration box is why i started thinking about it
[11:40:58] <Lcvette[m]> in MSM it is used only to calibrate the wear offset of the probe ball diameter to compensate for trigger distance in relation to the object contact point position
[11:43:22] * hazzy1[m] uploaded an image: Screenshot_2018-07-18_11-43-03.png (515KB) < https://matrix.org >
[11:52:27] <Lcvette[m]> ah, so they don't have an offset calibration?
[11:53:27] <hazzy-lab> I guess not, that is all I found
[11:53:29] <Lcvette[m]> i swear i thought i remember them having something software based
[11:53:42] <Lcvette[m]> maybe im mistaken, would certainly not be the first time
[11:54:45] <hazzy-lab> I would not be surprized if they did, but it is not mentioned in the manual
[11:54:49] <hazzy-lab> Another thing we can improve upon :D
[11:56:22] <Lcvette[m]> that idea for the multitude of offsets in linuxcnc is a fantastic idea
[11:56:51] <Lcvette[m]> especially considering the probe is a staionary tool
[11:58:10] <Lcvette[m]> those i thought were for lathe function though?
[11:58:19] <Lcvette[m]> are they active in mill configuration?
[11:58:22] <Lcvette[m]> or does that not matter?
[11:58:50] <hazzy-lab> They are always there, but not used for a mill, so I think they are fare game
[11:59:07] <hazzy-lab> parameters 5401-5409 hold the current Tool Offsets for X, Y, Z, A, B, C, U, V & W
[12:05:14] <Lcvette[m]> im trying to find what those offsets correspond to
[12:05:16] <Lcvette[m]> doesn't seem to be much information
[12:05:42] <hazzy-lab> Oh, they are just the offset in each axis
[12:06:17] <hazzy-lab> Then there are additional offsets for orientation for lathe tools, i think
[12:06:46] <Lcvette[m]> u v w axis?
[12:07:17] <hazzy-lab> aha, you are used to wimpy mach3 only 6 axis support!
[12:07:32] <hazzy-lab> LCNC supports 9 axes!
[12:08:02] <hazzy-lab> UVW are additional axes in the XYZ directions
[12:08:07] <Lcvette[m]> 9 axis?
[12:08:08] <Lcvette[m]> i guess im still in the stone ages..lol
[12:08:41] <hazzy-lab> so if you have mill with both a quill and a knee you would set the quill as Z and the knee as W
[12:09:12] <hazzy-lab> Then if the quill did not have enough travel the knee you could used the knee
[12:09:21] <Lcvette[m]> ah gotcha
[12:09:34] <Lcvette[m]> ok yeah was just reading that
[12:11:20] <hazzy-lab> These are all the offsetts stored in the tooltable: X, Y, Z, A, B, C, U, V, W, D, I, J, Q
[12:11:21] <Lcvette[m]> if we wrote the offset into a normal variable place holder
[12:11:29] <Lcvette[m]> what are those called?
[12:11:39] <Lcvette[m]> the 5xxx spots in the var table
[12:11:40] <Lcvette[m]> ?
[12:11:44] <hazzy-lab> parameters
[12:12:14] <Lcvette[m]> lol
[12:12:23] <Lcvette[m]> ok
[12:12:58] <Lcvette[m]> if it becomes problematic to use the tool table offsets...
[12:13:34] <Lcvette[m]> we could just use a block of 4 parameters, and write those parameters into the probing routine to be calculated in during the probing routine correct?
[12:13:48] <hazzy-lab> We can use G10 L10 for auto probe calibration!
[12:13:49] <hazzy-lab> http://linuxcnc.org
[12:15:06] <hazzy-lab> Yes we could also do that, but we would have to use non volitile parameters
[12:19:36] <Lcvette[m]> im not understanding the G10 L10 function
[12:19:59] <hazzy-lab> I am not either :(
[12:20:20] <hazzy-lab> I think it rewrites the offsets in the tooltable
[12:20:34] <hazzy-lab> But that is not clear from the docs
[12:20:57] <Lcvette[m]> i read it as having to change the tool table offset, then reload the G43 commend
[12:21:10] <Lcvette[m]> command
[12:22:00] <Lcvette[m]> that could work
[12:22:14] <Lcvette[m]> if we can specify the value to rewrite the tool table entries with
[12:22:28] <Lcvette[m]> which would mean it would need to be pulling them from a parameter file
[12:22:29] <Lcvette[m]> no?
[12:22:45] <Lcvette[m]> which would that not make it non volatile?
[12:23:20] <Lcvette[m]> or is my brain not following correctly
[12:23:29] <hazzy-lab> I think all the tool offstes are volitile, so would not be saved to the var file
[12:23:44] <Lcvette[m]> full admission, no clue what volatile means in the programming sense of the word
[12:23:55] <hazzy-lab> But I think they are saved to the tooltable
[12:24:59] <hazzy-lab> volatile just means that the value is not saved in the var file, so it does not persist after shutting down LCNC,
[12:26:09] <Lcvette[m]> ah
[12:26:10] <Lcvette[m]> gotcha
[12:27:36] <hazzy-lab> Yes just tested and it rewrites the tooltable!!!!
[12:27:38] <hazzy-lab> Hurray!
[12:27:52] <hazzy-lab> So you can do auto calibration!
[12:27:56] <Lcvette[m]> yeah?
[12:27:57] <Lcvette[m]> from where?
[12:27:59] <hazzy-lab> we :D\
[12:28:35] <hazzy-lab> I just issued this in MDI: G10 L10 P1 Z1.5
[12:28:47] <hazzy-lab> and watches the tooltable and the values changed
[12:28:50] <Lcvette[m]> what is we :D\
[12:29:07] <hazzy-lab> we => you
[12:29:09] <hazzy-lab> xD
[12:29:15] <Lcvette[m]> we rock?
[12:29:43] <hazzy-lab> we do, but my typing skills don't
[12:30:13] <Lcvette[m]> i was asking about the :D\
[12:30:59] <hazzy-lab> just me hitting random keys by accident, lol
[12:31:18] <Lcvette[m]> i don't know the keyboard lingo
[12:31:24] <Lcvette[m]> lol
[12:31:38] <Lcvette[m]> ok so that is awesome!
[12:31:55] <hazzy-lab> it is, very exciting
[12:32:02] <Lcvette[m]> now, thats great for the length offset
[12:32:02] <Lcvette[m]> how about the DIAM
[12:32:04] <Lcvette[m]> :/
[12:32:09] <Lcvette[m]> :0
[12:34:20] <hazzy-lab> Well, as long as the D value in the tooltable is close, the offset values will take care of it
[12:36:25] <Lcvette[m]> not following
[12:37:40] <hazzy-lab> Well, there is no need for diameter comp in addition to the offsets, the only reason the diameter is needed at all is for things like calculating how far the probe needs to go down to probe the sides of a part
[12:39:12] <hazzy-lab> maybe that is not right ..
[12:39:44] <Lcvette[m]> mmmm...
[12:39:57] <Lcvette[m]> the ball has a width
[12:40:47] <Lcvette[m]> so it i "think" needs a diameter
[12:41:23] <hazzy-lab> Yes, but I think all it needs is a nominal diameter
[12:41:28] <Lcvette[m]> and then the offset is used to make up the vairance in triggering distance from the different angles
[12:42:59] <Lcvette[m]> for instance, in MSM, even though my ball is .125"
[12:43:42] <Lcvette[m]> the actual calibrated diameter of the ball is more like .139"
[12:45:04] <Lcvette[m]> that is an exaggerated number
[12:45:43] <Lcvette[m]> but its because there is a delay in the time to open the circuit from moving the probe mechanics
[12:45:58] <Lcvette[m]> so in essence you're right
[12:46:02] <hazzy-lab> Yes, but MSM does not use offsets to calibrate the probe, it only uses the diameter, and assumes the probe is perfectly consentric with the spindle
[12:46:03] <Lcvette[m]> the ball diameter i really only a "starting point i guess
[12:46:16] <Lcvette[m]> and for use in the depth calculation
[12:46:23] <Lcvette[m]> lol
[12:46:58] <Lcvette[m]> correct.. well it uses the wear offset
[12:47:12] <Lcvette[m]> but not individual directional
[12:47:30] <hazzy-lab> I guess one problem with using offsets it that is assumes the machine has spindle orientation, so the probe is always oriented the same way
[12:47:33] <Lcvette[m]> so in essence its just adding to the overal diameter
[12:47:42] <Lcvette[m]> sorry subtracting from
[12:47:49] <hazzy-lab> right
[12:47:49] <Lcvette[m]> it makes the diameter smaller
[12:48:51] <Lcvette[m]> well if its in a tool changer, the probe will always be returned the same way and retrieved the same way
[12:48:56] <Lcvette[m]> and if it is installed by hand i would say the same thing
[12:50:44] <hazzy-lab> Ok that is true, and its not hard to orient it by hand it needed
[12:51:30] <hazzy-lab> and people don't have to use auto calibration, they could just addjuct the ball diameter like you do now
[12:51:50] <Lcvette[m]> yup
[12:52:13] <Lcvette[m]> we can offer both methods
[12:52:22] <Lcvette[m]> this is going to be badass
[12:52:30] <hazzy-lab> it is!
[12:52:36] <Lcvette[m]> this is a great way to combat the nightmare of the tripod probe design
[12:52:43] <Lcvette[m]> this is EPIC
[12:53:23] <Lcvette[m]> ok, i need to do some business work for a couple hours before i can get back to probe graphics
[12:53:23] -HaikuBot[m]:#hazzy- Ok that is true, and
[12:53:23] -HaikuBot[m]:#hazzy- its not hard to orient it
[12:53:24] -HaikuBot[m]:#hazzy- by hand it needed
[12:54:17] <Lcvette[m]> lol
[12:54:34] <Lcvette[m]> i will bbL
[12:54:42] <hazzy-lab> Ok, cu
[12:54:50] <Lcvette[m]> :D
[12:54:54] <hazzy-lab> I think we made good progress
[13:10:24] <Lcvette[m]> yes we are on a roll
[13:10:29] <Lcvette[m]> and the creative juices are flowing
[13:10:38] <Lcvette[m]> you are going much faster then me
[13:10:39] <Lcvette[m]> i feel pokey
[13:11:28] * Lcvette[m] uploaded an image: step_off_width.png (155KB) < https://matrix.org >
[13:11:29] * Lcvette[m] uploaded an image: x_y_clearance.png (173KB) < https://matrix.org >
[13:11:29] * Lcvette[m] uploaded an image: max_x_y_distance_border.png (114KB) < https://matrix.org >
[13:11:30] * Lcvette[m] uploaded an image: max_z_distance_border.png (228KB) < https://matrix.org >
[13:11:48] <Lcvette[m]> these are the finished versions from last night
[13:12:04] <Lcvette[m]> have some more to do this afternoon, didn't get as far as i hoped last night after the wife went to bed
[13:17:52] <hazzy-lab> Great, thank you!
[13:22:16] <Lcvette[m]> and actually, now that i htink about it, I think i can probably do better by using the text input from the image editor rather than the draftsight text input
[13:22:31] <Lcvette[m]> so scratch that as a final, i can improve those
[13:22:38] <Lcvette[m]> lol make the text much nicer looking for our masterpiece
[13:23:22] <Lcvette[m]> only the best is acceptable
[13:23:30] <Lcvette[m]> we gotta make tormach squirm with jealousy
[13:23:39] <Lcvette[m]> ok now i gotta get to work 4real
[13:23:46] <Lcvette[m]> lol
[13:23:48] <Lcvette[m]> see ya in a bit
[13:23:48] <hazzy-lab> LOL
[13:23:52] <hazzy-lab> cu
[13:54:50] * Lcvette[m] uploaded an image: step_off_width.png (173KB) < https://matrix.org >
[14:15:16] * Lcvette[m] uploaded an image: step_off_width.png (172KB) < https://matrix.org >
[14:15:17] <Lcvette[m]> more better!
[14:15:27] <Lcvette[m]> looks pro now
[14:45:22] <hazzy-lab> much more betterer!
[14:48:12] <lcvette[m]2> Its gonna be boss!
[16:14:04] <TurBoss> Hello
[16:14:34] <hazzy-lab> hey
[16:19:13] <TurBoss> lol
[16:19:23] <TurBoss> TurBoProbe
[16:19:24] <TurBoss> demo
[16:19:29] <TurBoss> :P
[16:25:46] <hazzy-lab> xD
[16:29:29] -!- mode/#hazzy [+o hazzy-lab] by ChanServ
[16:57:45] <Lcvette[m]> phwew.. made it to the post office with my orders just in the nick of time
[16:59:56] <hazzy-lab> fantastic!
[17:11:17] * Lcvette[m] uploaded an image: max_x_y_distance.png (134KB) < https://matrix.org >
[17:27:24] * Lcvette[m] uploaded an image: max_z_distance.png (232KB) < https://matrix.org >
[17:36:28] * Lcvette[m] uploaded an image: max_z_distance.png (194KB) < https://matrix.org >
[17:41:37] <Lcvette[m]> ya know, while i was doing these helper graphics it dawned on me that we could make a training wheels button set for beginner probers that had bigger buttons and pretty much were a manual in the button for each probe routine on where and how to setup the probe before starting.. make the buttons bigger and put all the info they would need right in the button...lol
[17:48:17] -!- hazzy1 has quit [Ping timeout: 265 seconds]
[17:51:51] * Lcvette[m] uploaded an image: x_y_clearance.png (195KB) < https://matrix.org >
[19:28:22] * Lcvette[m] uploaded an image: extra_probe_depth.png (193KB) < https://matrix.org >
[20:51:36] <TurBoss> http://blog.qt.io
[20:55:33] <TurBoss> https://www.reddit.com
[21:20:14] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch CameraWidget at Hazzy / QtPyVCP ( https://gitlab.com )
[21:20:15] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch CameraWidget at Hazzy / QtPyVCP ( https://gitlab.com )
[21:29:26] <TurBoss> Lcvette: thoose pic loock very profesional
[21:29:27] <TurBoss> :D
[21:29:45] <TurBoss> I like the last one probe looks like a potioon
[21:30:38] <TurBoss> https://i.imgur.com
[21:32:35] <lcvette[m]2> Lol
[21:32:37] <lcvette[m]2> Thanks
[21:32:44] <lcvette[m]2> Coming along slowly and steady
[21:32:53] <lcvette[m]2> Not as fast as you guys
[21:33:28] <TurBoss> nah
[21:37:35] <hazzy-lab> looks great Lcvette!
[21:38:16] <hazzy-lab> TurBoss: How is that diffrent than doing pip install pyqt5?
[21:38:34] <hazzy-lab> it is PySide instead of PyQt?
[21:39:00] <TurBoss> no idea
[21:39:11] <TurBoss> i think they have diferent license
[21:39:28] <hazzy-lab> ok, probably
[21:39:44] <hazzy-lab> Maybe pyside will work on 18.04 ...
[21:39:51] <hazzy-lab> I will try
[21:40:21] <TurBoss> not really needed
[21:40:32] <TurBoss> I'm working on debian 9
[21:40:41] <TurBoss> I'm with the py thing
[21:41:14] <hazzy-lab> What would be really nice is if we could get it to work on wheezy, since a lot of people still use that
[21:41:34] <TurBoss> ya mostli for rtai
[21:41:43] <hazzy-lab> I have a wheezy RTAI laptop here I can test on
[21:42:16] <hazzy-lab> The laptop as a parport and has about 6000ns latency :)
[21:42:39] <hazzy-lab> Very good from running steppers
[21:42:50] <hazzy-lab> and portable
[21:44:24] <TurBoss> true
[21:49:56] * TurBoss is working on halcompile.py
[21:52:37] <TurBoss> halcomp.g
[21:55:23] <hazzy-lab> great!
[22:03:01] <lcvette[m]2> Thanks!
[22:03:22] <lcvette[m]2> I need a system to work on that isn't my big Mill
[22:04:01] <lcvette[m]2> Thought about buying a cheap used computer
[22:06:48] <hazzy-lab> Lcvette: I have four 3.2 GHz i5 lenovo ThinkCenres left over from a lot of six I bought, your are welcome to one, they have good latency
[22:07:17] <hazzy-lab> Don't know hot to get it to you though
[22:07:45] <lcvette[m]2> Whatcha want for one?
[22:09:06] <hazzy-lab> I'll give it to you (if you make the probe screen graphics :D)
[22:10:05] <lcvette[m]2> Sold!! Stick it in a box give me the dimensions and weight and I'll send you a label for it
[22:10:17] <hazzy-lab> Perfect!!
[22:10:36] <lcvette[m]2> Lol
[22:10:49] <hazzy-lab> I'll install 2.8 on it for you, so you don't have to mess with that
[22:10:51] <lcvette[m]2> Hey....
[22:10:57] -HaikuBot[m]:#hazzy- I'll install 2.8 on
[22:10:57] -HaikuBot[m]:#hazzy- it for you, so you don't
[22:10:58] -HaikuBot[m]:#hazzy- have to mess with that
[22:11:09] <lcvette[m]2> Was just about to ask
[22:11:09] <lcvette[m]2> Lol
[22:11:42] <hazzy-lab> (it sounds like I am being generous, but I actually what you to start testing stuff, lol)
[22:12:55] <TurBoss> hehehe
[22:13:13] <lcvette[m]2> No doubt!! I want to as well!!
[22:13:43] <lcvette[m]2> I'll send a 2 day label and order a monitor on prime right now
[22:13:45] <TurBoss> this halcompile.g file is 1500 lines long :((
[22:14:00] <hazzy-lab> fantastic!
[22:14:17] <hazzy-lab> halcompile is SOOO long
[22:14:46] <TurBoss> just replacing print >> file with f.write("blablah\n")
[22:15:01] <hazzy-lab> I don't think that is needed, but it is a good idea
[22:15:29] <hazzy-lab> dident rene already do that?
[22:15:47] <TurBoss> yes but without the \n an each line
[22:15:58] <hazzy-lab> oh xD
[22:16:12] <TurBoss> the haltests failed
[22:16:12] <hazzy-lab> that is important
[22:16:13] <TurBoss> *at
[22:16:55] * hazzy-lab goes to find Lcvette's PC
[22:17:51] <lcvette[m]2> Lcvette (@lcvette:matrix.org): shops on Amazon for peripherals
[22:20:08] <hazzy1[m]> Spotted
[22:20:22] * hazzy1[m] uploaded an image: VectorImage_2018-07-18_101934.jpg (502KB) < https://matrix.org >
[22:22:52] * hazzy1[m] uploaded an image: 20180718_222146.jpg (255KB) < https://matrix.org >
[22:22:53] <hazzy1[m]> Laptops with parports!
[22:23:41] <lcvette[m]2> Lol..... Hey make sure it's not radioactive!
[22:24:01] <lcvette[m]2> Hahaha
[22:24:18] <hazzy1[m]> It is sitting next to so uranium 😂
[22:25:07] <lcvette[m]2> 😨
[22:25:51] <lcvette[m]2> Probably will improve the latency
[22:25:53] <TurBoss> https://www.youtube.com
[22:26:02] <TurBoss> lol
[22:27:56] * hazzy1[m] uploaded an image: 20180718_222714.jpg (1023KB) < https://matrix.org >
[22:28:21] <TurBoss> is that your third arm?
[22:28:30] <TurBoss> :P
[22:30:36] <hazzy1[m]> Lol, looks mutilated doesn't it xD
[22:31:28] * hazzy1[m] uploaded an image: 20180718_222345.jpg (287KB) < https://matrix.org >
[22:31:29] <hazzy1[m]> So much junk ...
[22:31:47] <TurBoss> lol
[22:32:20] <TurBoss> https://www.youtube.com
[22:32:22] <TurBoss> bonus
[22:44:17] <hazzy1[m]> Lol, I unplugged my computer when trying to plug in the new one
[22:44:19] -HaikuBot[m]:#hazzy- Lol, I unplugged
[22:44:20] -HaikuBot[m]:#hazzy- my computer when trying to
[22:44:21] -HaikuBot[m]:#hazzy- plug in the new one
[22:44:26] <TurBoss> lol
[22:44:43] <TurBoss> great haiku
[22:45:32] -!- aircooled has joined #hazzy
[22:45:49] aircooled is now known as hazzy-lab1
[22:46:02] -!- hazzy-lab has quit [Ping timeout: 276 seconds]
[22:46:02] hazzy-lab1 is now known as hazzy-lab
[22:46:23] <hazzy1[m]> Hahaha, that is a good one
[22:46:52] -!- mode/#hazzy [+o hazzy-lab] by ChanServ
[22:47:19] <Lcvette[m]> hahahaha
[22:47:28] <Lcvette[m]> i love that loft, that is super sweet!
[22:48:01] <hazzy-lab> I had to expand somewhere, and the only room I had was UP xD
[22:56:55] <lcvette[m]2> Good place to go
[22:57:14] <lcvette[m]2> Does that PC have DVI output for video?
[22:57:51] <lcvette[m]2> The white plug type
[22:58:14] <hazzy-lab> No, it has a VGA, but I can put a DVI card in it if you want
[22:58:16] -HaikuBot[m]:#hazzy- No, it has a VGA,
[22:58:16] -HaikuBot[m]:#hazzy- but I can put a DVI card
[22:58:17] -HaikuBot[m]:#hazzy- in it if you want
[22:58:34] <hazzy-lab> I have to find it, lol
[22:58:59] <lcvette[m]2> You have one?
[22:59:00] <TurBoss> kurt you are a great poet
[22:59:01] <lcvette[m]2> Lol
[22:59:08] <lcvette[m]2> That would save me a ton of headaches
[22:59:29] <hazzy-lab> Ok, I should have one somewhere around here
[22:59:30] <lcvette[m]2> Was trying to figure out how to expand my work area here
[23:00:21] <lcvette[m]2> I already have two monitors, so I thought maybe best if I just got a switch box, but then realized my fancy video card outputs a DVI and HDMI
[23:01:10] <hazzy-lab> I hat to do a some rearranging here to get set up to install debian, it displaced a 40year old mechanical computer from Los Alamos xD
[23:01:34] <hazzy-lab> This does have HDMI
[23:03:48] <lcvette[m]2> yeah?
[23:04:31] * lcvette[m]2 uploaded an image: IMG_20180718_230215105.jpg (4204KB) < https://matrix.org >
[23:06:15] <Lcvette[m]> im realestate poor and the wife has banned any additional desk in the common area.. this can be "neatened up to be presentable for company
[23:07:02] * hazzy1[m] uploaded an image: 20180718_230608.jpg (207KB) < https://matrix.org >
[23:07:11] <hazzy1[m]> The one on the right is yours
[23:07:37] <hazzy-lab> dtd, bbl
[23:07:41] <hazzy-lab> gtg
[23:07:43] <hazzy-lab> lol
[23:07:46] <Lcvette[m]> lol
[23:07:48] <Lcvette[m]> ok
[23:11:24] <TurBoss> make clean && make
[23:11:24] <TurBoss> oops
[23:12:14] <Lcvette[m]> yes, i have to clean it for company
[23:12:15] <Lcvette[m]> lol
[23:13:04] <Lcvette[m]> and the stool kills my lower back
[23:13:13] <Lcvette[m]> i miss my comfortable desk chair
[23:13:33] <Lcvette[m]> one day i will have it back
[23:14:08] <TurBoss> :)
[23:38:01] -!- Roguish has quit [Remote host closed the connection]
[23:55:10] <lcvette[m]2> Is there any specific wireless keyboard and mouse I need to get to run?
[23:55:30] <lcvette[m]2> Logitech ok?
[23:58:49] <hazzy-lab> Lcvette: I use the $3 specials from MicroCenter
[23:59:06] <hazzy-lab> (might explain my problllems typing, lol)
[23:59:24] <lcvette[m]2> Hahaha
[23:59:33] <lcvette[m]2> Micro center it is