#hazzy | Logs for 2018-07-19
Back
[00:00:37] <hazzy-lab> Do you have Ethernet cord available for it?
[00:00:50] <hazzy-lab> Or will you need a WiFi card?
[00:02:46] <lcvette[m]2> I have no cable in my house hence my current predicament
[00:02:52] <lcvette[m]2> Lol
[00:03:01] <lcvette[m]2> I use USB dongle wifi adapters
[00:03:15] <lcvette[m]2> Those ok?
[00:04:44] <lcvette[m]2> I can order one on Amazon
[00:05:15] <hazzy-lab> Most of the USB dongles won't work with Debian, which is a pain, but it is intentional on the part of the companies that make them
[00:05:26] <lcvette[m]2> What are you loading on it?
[00:05:30] <lcvette[m]2> Stretch?
[00:05:33] <hazzy-lab> Debian Stretch
[00:06:34] <hazzy-lab> I will install the non free drivers, hopefully those will work with the dongle you get
[00:06:57] <lcvette[m]2> Wheezy?
[00:09:48] <hazzy-lab> The usb dongles have problems with all the linux distros
[00:10:44] <hazzy-lab> Any of these should work: https://www.thinkpenguin.com
[00:11:41] <hazzy-lab> Hmm, I am putting a WiFi card in it so I can download dependencies, I can tell you what that is and if you get the same one it will be sure to work
[00:14:28] <lcvette[m]2> Perfect!
[00:14:37] <lcvette[m]2> That's how I like to too
[00:14:51] <TurBoss> Kurt could you helpme ?
[00:14:56] <lcvette[m]2> I use a single with stretch without issue
[00:14:58] <TurBoss> I did a new branch for py3
[00:15:02] <lcvette[m]2> Dongle
[00:15:41] <lcvette[m]2> Cheapo panda one
[00:15:43] <TurBoss> https://github.com
[00:15:46] <lcvette[m]2> $9
[00:15:47] <lcvette[m]2> Lol
[00:16:17] <lcvette[m]2> Had to fix a few things in the networking setup though
[00:16:36] <hazzy-lab> TurBoss: Sure
[00:20:59] <hazzy-lab> Lcvette: What should I put the for user name your name or something like LinuxCNC Operator?
[00:21:26] <lcvette[m]2> Chris
[00:21:33] <lcvette[m]2> chris
[00:21:42] <hazzy-lab> ok, and pass?
[00:21:46] <hazzy-lab> cnc?
[00:21:56] <hazzy-lab> lol, that is what all my PC use
[00:22:04] <lcvette[m]2> yeah
[00:22:08] <lcvette[m]2> That works
[00:22:16] <lcvette[m]2> Easy to remember
[00:22:23] <hazzy-lab> ok, and you can always change it
[00:24:11] <hazzy-lab> installing ....
[00:25:54] <lcvette[m]2> Ooooooohhhhhh booooooooyyyyyy
[00:26:12] <lcvette[m]2> I'm gonna be Linux legit
[00:28:44] <hazzy-lab> 87% complete
[00:31:22] <hazzy-lab> TurBoss: What it the .g extension on halcompile for?
[00:31:38] <TurBoss> duno
[00:31:43] <hazzy-lab> ok
[00:32:04] <hazzy-lab> I can't find anything about it on line either
[00:32:07] <lcvette[m]2> Lol
[00:32:09] <TurBoss> it generates halcompile.py
[00:32:10] <TurBoss> so g is for generator
[00:32:24] <hazzy-lab> Ah, that makes sense
[00:32:44] <hazzy-lab> install complete
[00:32:53] <TurBoss> no worries i can continue by my own
[00:33:15] <lcvette[m]2> Saweet!!
[00:33:15] <hazzy-lab> I just checked out out your branch
[00:33:24] <hazzy-lab> What are you working on now?
[00:33:29] <hazzy-lab> I want to help
[00:33:58] <hazzy-lab> I started looking at the boost python stuff yesterday
[00:34:22] <TurBoss> I changed the prints with writes
[00:34:31] <hazzy-lab> fantastic!
[00:34:42] <TurBoss> but i broke
[00:34:42] <TurBoss> it
[00:34:43] <TurBoss> components doesn't compile
[00:34:51] <TurBoss> I'm fixing...
[00:37:00] <TurBoss> identation is f...
[00:38:13] <hazzy-lab> yes, and Py3 does not like mixed tabs and spaces at all ..
[00:52:30] * hazzy-lab is reading https://docs.python.org
[00:54:56] <TurBoss> someone fixed it on master
[00:55:02] <TurBoss> i resign
[00:55:03] <TurBoss> for now
[00:56:04] <TurBoss> gn8
[01:00:19] <hazzy-lab> night
[01:01:22] <lcvette[m]2> Night turboss
[01:01:40] <lcvette[m]2> Amazon does not have microcenter keyboards
[01:02:11] <lcvette[m]2> Will any old cheap keyboard work?
[01:02:25] <lcvette[m]2> Or are they specific to Linux?
[01:02:42] <hazzy-lab> Any will work
[01:02:46] <lcvette[m]2> Ok
[01:02:49] <lcvette[m]2> Lol
[01:03:22] <hazzy-lab> Well, any will work for you, none work for me xD
[01:03:59] <lcvette[m]2> Wireless USB Keyboard Mouse Combo CHONCHOW 2.4GHz nano Receiver Full Size Slim keyboard Ergonomic Mice for Windows 7/8/10 Linux Vista XP Chrome OS(Black) https://www.amazon.com
[01:04:18] <lcvette[m]2> Because ChonCow
[01:04:29] <hazzy-lab> LOL
[01:04:34] <lcvette[m]2> Even logo on the keyboard..lol
[01:04:44] <lcvette[m]2> So you know it's high quality
[01:04:58] <lcvette[m]2> Kidding
[01:05:11] <lcvette[m]2> Gonna grab Logitech, never gone wrong with them
[01:05:43] <lcvette[m]2> Lord knows my shop keyboards take a beating too
[01:06:10] <lcvette[m]2> And get coolant baths regularly
[01:06:17] <lcvette[m]2> Lol
[01:07:50] <hazzy-lab> That is why I get the $3 ones lol
[01:07:56] <hazzy-lab> they only last a month or two
[01:08:32] <hazzy-lab> some how I broke my last one completely in half
[01:10:38] <lcvette[m]2> You are tough on them
[01:10:39] <lcvette[m]2> Lol
[01:11:52] <lcvette[m]2> I've dropped them, dropped tools on them, air them off, get chips stuck in the keys (real bad when it's the shift key and your rapid jogging)
[01:29:05] <hazzy-lab> I am very hard on them
[01:29:18] <hazzy-lab> It is taking forever to install the LCNC deps
[01:29:48] <lcvette[m]2> Yeah?
[01:30:04] <lcvette[m]2> What are those?
[01:30:42] <lcvette[m]2> Wondering if I installed those on my big machine
[01:33:03] <hazzy-lab> No, they are only needed it you are going to build LCNC from source
[01:33:28] <hazzy-lab> There are about 30 of them, it is 87% thru the first one :(
[01:33:30] <lcvette[m]2> Ah
[01:33:57] <hazzy-lab> Normally it only tales about 15min total, this has been working for about 45min
[01:33:58] <lcvette[m]2> Geeeeez
[01:34:12] <lcvette[m]2> Is that normal?
[01:34:31] <lcvette[m]2> Oh
[01:34:40] <lcvette[m]2> Slow internet
[01:34:50] <lcvette[m]2> ?
[01:35:21] <lcvette[m]2> Needs more uranium
[01:35:27] <lcvette[m]2> Lol
[01:35:40] <hazzy-lab> I think my Internet connection is almost non existent
[01:35:44] <hazzy-lab> Yes, lol
[01:36:47] <hazzy-lab> I had a 500mCi americium-241 source for a while, that would have done it xD
[01:38:28] * lcvette[m]2 uploaded an image: acoustic-coupler.jpg (49KB) < https://matrix.org >
[01:38:49] <lcvette[m]2> Only if you added it to this bad boy
[01:38:52] <lcvette[m]2> Lol
[01:39:09] <hazzy-lab> LOL
[01:39:27] <lcvette[m]2> Lol
[01:43:35] <hazzy-lab> IchGucksLive: hazzy-lab, its getting wearer and wearer on my YT channel as people noe on §d Printer are not familiar with zero systems of Corrdinates Mashine Part Tool
[01:43:50] <hazzy-lab> LOL, what does that mean?
[01:44:32] <lcvette[m]2> Hmmm
[01:45:09] <lcvette[m]2> It's a cipher
[01:45:16] <hazzy-lab> I think so
[01:45:19] <hazzy-lab> xD
[01:45:44] <lcvette[m]2> Wearer?
[01:46:00] <lcvette[m]2> Worse?
[01:46:02] <hazzy-lab> I can't figure it out
[01:46:08] <hazzy-lab> Oh, maybe
[01:46:40] <hazzy-lab> still it does not make any sense, hahaha
[01:46:52] <hazzy-lab> Almost as bad as me sometimes
[01:47:06] <lcvette[m]2> I've never even seen some of those characters
[01:47:08] <lcvette[m]2> That is straight keyboard wizardry
[01:47:28] <hazzy-lab> §
[01:47:44] <hazzy-lab> haha, i guess that was supposed to be a 3
[01:47:55] <lcvette[m]2> How does that even occur?
[01:48:10] * hazzy-lab wonders what a German keyboard looks like
[01:49:35] <hazzy1[m]> https://answers.unrealengine.com
[01:49:35] <lcvette[m]2> I imagine them covered in saurkrout and mustard and dark ale
[01:49:36] <lcvette[m]2> Lol
[01:49:58] <hazzy-lab> that is probably accurate, LOL
[01:50:13] <lcvette[m]2> Lol
[01:50:33] <lcvette[m]2> Now I'm hungry
[01:50:43] <hazzy-lab> that sqiggly thing is on the 3 key, so that explains that mastery
[01:50:48] <hazzy-lab> LOL
[01:50:56] <lcvette[m]2> Nice
[01:51:56] <hazzy-lab> Almost done installing the build deps, then I'm going to get some sleep
[01:52:11] <lcvette[m]2> I think icks is saying 3d printer people have no idea about machine work coordinate offset
[01:52:28] <hazzy-lab> That is kinda what I gathered
[01:52:56] <lcvette[m]2> Sounds good
[01:53:00] <hazzy-lab> But it is not clear, lol
[01:53:08] <lcvette[m]2> I'm beat myself
[01:53:22] <hazzy-lab> done!
[01:53:25] <lcvette[m]2> Nothing icks says ever is
[01:53:36] <hazzy-lab> that is the truth!
[01:53:41] <lcvette[m]2> Mumbled Mumble Mumble beer garden
[01:53:52] <hazzy-lab> you forgot the women
[01:53:56] <hazzy-lab> xD
[01:54:30] <lcvette[m]2> Gotta love him though, 70+ years old
[01:54:49] <lcvette[m]2> Still kicking the CNC bug
[01:54:52] <hazzy-lab> I know, and his youtube vida are actually very informative
[01:55:16] <lcvette[m]2> Yeah
[01:55:23] <lcvette[m]2> Nice!!!
[01:55:30] <lcvette[m]2> Go get some sleep!
[01:55:39] <hazzy-lab> you too!
[01:55:42] <hazzy-lab> night
[01:55:47] <lcvette[m]2> Night!
[09:03:02] <lcvette[m]2> morning
[09:09:30] <TurBoss> morning
[09:29:08] * lcvette[m]2 uploaded an image: z_clearance.png (230KB) < https://matrix.org >
[09:40:19] <TurBoss> wow
[09:41:08] -!- Roguish has joined #hazzy
[10:02:18] <hazzy-lab> morning
[10:03:34] <hazzy-lab> all those look very pro
[10:04:55] <lcvette[m]2> im on buttons now
[10:05:05] <hazzy-lab> hurray!
[10:05:06] <lcvette[m]2> or icons
[10:05:21] <lcvette[m]2> so if you need to direct me here now is the time
[10:05:26] <lcvette[m]2> lol
[10:06:32] <hazzy-lab> haha, you don't need any direction!
[10:07:00] <hazzy-lab> your LCNC 2.8 just finished compiling, took it like 30s
[10:07:05] <lcvette[m]2> i mean format wise
[10:07:11] <hazzy-lab> which is REALLY fast
[10:07:17] <lcvette[m]2> size wise etc
[10:07:19] <lcvette[m]2> any no no's
[10:07:40] <TurBoss> lol
[10:07:44] <lcvette[m]2> nice!
[10:07:46] <hazzy-lab> ah
[10:07:52] <lcvette[m]2> must have been the extra uranium
[10:07:53] <hazzy-lab> svg format would be best
[10:08:00] <hazzy-lab> LOL
[10:09:09] <lcvette[m]2> ok let me see what i can do
[10:09:47] <hazzy-lab> lol, the compile log says "0 stray cats were added." I have never seen that before,
[10:10:36] <hazzy-lab> ElChapas: Do you know what that means?
[10:14:20] <lcvette[m]2> yes, no el gatos
[10:15:47] <lcvette[m]2> means no sissies
[10:15:56] <lcvette[m]2> manly version of linux
[10:15:58] <lcvette[m]2> lol
[10:16:02] <hazzy-lab> hahaha
[10:16:38] <lcvette[m]2> i can't help ya there
[10:17:07] <lcvette[m]2> i should warn you
[10:17:22] <lcvette[m]2> I am that 1 in 10 person
[10:17:24] <lcvette[m]2> so whatever could happen will happen
[10:17:48] <lcvette[m]2> the stray cat it was supposed to add and didn't was left out because the cosmos knew it was being sent to me
[10:18:14] <lcvette[m]2> the one free radical hanging out around your tester knocked the stray cat out that was supposed to make it in
[10:18:15] <hazzy-lab> LOL
[10:19:25] <hazzy-lab> That happens, I have had my laptop crash when exposed to to much radiation, it corrupts the ram
[10:19:41] <lcvette[m]2> and in its place a fat gerbal snuck in that will wreak havoc on everything i try and do.. just wait and see
[10:19:55] <hazzy-lab> hahaha
[10:23:07] <lcvette[m]2> for years i suffered through using a subpar workstation to run solidworks, and finally my wife while working with me on a project for her mom was witness to the frustrations of moving a model around and the lag of having to wait for it to catch up and freeze and lock the computer and lose my work.. she finally agreed to greenlight the purchase of a nicer workstation for me...
[10:24:48] <lcvette[m]2> so i shopped for a nice value economical work station did my research and ended up with a lenovo think station with a core I7 4770K and a good cad graphics card and love it its like bottom of the rung cad station but way beyond anyhting ive ever had before
[10:25:12] <lcvette[m]2> so 6 months in the lenovo window manager pops up with updates
[10:25:14] <lcvette[m]2> i click ok
[10:25:16] <lcvette[m]2> it guides me through
[10:25:18] <lcvette[m]2> it recomends the critical updates
[10:25:25] <lcvette[m]2> i follow instructions
[10:25:32] <lcvette[m]2> i get to the last one, the BIOS update
[10:25:54] <lcvette[m]2> it updates and goes to restart and just has a black screen and beeps at me
[10:26:14] <lcvette[m]2> mind you i just spent $1000 for this computer 6 month prior
[10:26:35] <hazzy-lab> yikes!
[10:26:39] <lcvette[m]2> well, 7 months
[10:27:05] <lcvette[m]2> lenovo tells me there is a 6 month warranty
[10:27:12] <lcvette[m]2> and they are sorry there is othing they can do
[10:27:22] <lcvette[m]2> that the mother board is most likely damaged
[10:27:33] <hazzy-lab> almost sounds like it was planned ...
[10:28:06] <lcvette[m]2> and that i should have purchased the extended warranty coverage
[10:28:16] <lcvette[m]2> so after 3 hours of calls i get nowhere
[10:28:32] <lcvette[m]2> i end up finding a used mobo on ebay for $100 bucks and it fixed the problem
[10:28:35] <lcvette[m]2> but that is my luck
[10:29:29] <lcvette[m]2> so, now when something askls me to update... it gets a quick dismmissal with a contrite fuck off
[10:30:07] <lcvette[m]2> pardon the typos
[10:30:18] <lcvette[m]2> i type with 2 fingers
[10:32:55] <hazzy-lab> I hate windows updates, I have had them disabled for yours now since they always cause problems
[10:32:55] <hazzy-lab> But I have never had firmware updates, that much be something they do on newer moboards, probably at the request of the NSA lol
[10:33:04] <lcvette[m]2> ok, so im in inkscape
[10:33:08] <lcvette[m]2> i see this is pretty cool
[10:33:09] <lcvette[m]2> there are some templates
[10:33:33] <hazzy-lab> yes, it is very good
[10:33:43] <lcvette[m]2> i see one for a desktop which appears to be in screen resolution numbers
[10:35:39] <lcvette[m]2> what size would you suggest i work inside?
[10:35:44] <lcvette[m]2> for scale reference?
[10:42:22] <TurBoss> metric :P
[10:43:11] <TurBoss> remember that we are barbarians here in the UE
[10:43:27] <TurBoss> *EU
[10:43:53] <lcvette[m]2> pretty sure its in pixels
[10:44:11] <lcvette[m]2> 1920x1080?
[10:48:33] <hazzy-lab> I would use 1024x768, the I guess I am a little out of date xD
[10:48:40] <hazzy-lab> 1920x1080 is good
[10:48:58] <hazzy-lab> for modern screens
[10:50:41] <lcvette[m]2> well, i can always just scale the buttons smaller
[10:50:53] <lcvette[m]2> make two sets
[10:50:59] <lcvette[m]2> thats simple
[10:51:20] <lcvette[m]2> or will they auto scale
[10:51:25] <hazzy-lab> or I can scale them in code
[10:51:29] <lcvette[m]2> i have big screen and the future is big screens
[10:51:59] <hazzy-lab> Its bester to make them bigger, can always make them smaller
[10:52:01] <lcvette[m]2> right, thats what i wanted to understand
[10:52:03] <lcvette[m]2> how i need to comply with what you need to work with
[10:52:07] <lcvette[m]2> forgive me
[10:52:26] <lcvette[m]2> im very new to software stuff
[10:52:31] <lcvette[m]2> im happy to do whatever you need just need to know what you need
[10:52:57] -HaikuBot[m]:#hazzy- im happy to do
[10:52:58] -HaikuBot[m]:#hazzy- whatever you need just need
[10:52:58] -HaikuBot[m]:#hazzy- to know what you need
[11:30:42] <hazzy-lab> TurBoss: Do you remember what installed to get make to work in QtPyVCP?
[11:31:57] <TurBoss> hmmmm
[11:32:04] <TurBoss> yes...
[11:32:14] <hazzy-lab> pyqt5-dev-tools
[11:32:17] <hazzy-lab> got it!
[11:32:18] <TurBoss> no
[11:32:19] <hazzy-lab> Thanks
[11:32:27] <hazzy-lab> that worked, lol
[11:33:47] <TurBoss> lol
[11:33:50] <TurBoss> :P
[11:34:12] <hazzy-lab> I added that command to the README
[11:34:29] <hazzy-lab> So I don't forget again, xD
[11:48:25] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[11:53:21] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[11:58:22] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[12:50:22] * lcvette[m]2 uploaded an image: probe_front_left_corner_button.png (201KB) < https://matrix.org >
[12:50:43] <lcvette[m]2> what do you guys think about something like this?
[12:55:37] <lcvette[m]2> and don't be affraid to tell me to go back to the drawing board, but give me some critisism of what you would want to see different
[13:06:50] * lcvette[m]2 uploaded an image: probe_corner_group_buttons.png (376KB) < https://matrix.org >
[13:07:33] <lcvette[m]2> was thinking about laying it out in a "corner group like so
[13:07:34] <lcvette[m]2> ?
[13:07:35] <lcvette[m]2> thoughts?
[13:11:32] <TurBoss> i don't see why the bal is inside the part
[13:11:42] <TurBoss> ball/probe
[13:12:12] <lcvette[m]2> starting position for the probing routine
[13:15:09] <lcvette[m]2> are you familiar with machstdmill?
[13:15:16] <lcvette[m]2> and its probe routines?
[13:15:52] <lcvette[m]2> it is different than how tormach does it
[13:16:01] <lcvette[m]2> it is much better IMHO
[13:16:32] <lcvette[m]2> it is a one button press to quickly find the XYZ zero point of a corner and set the WCO to zero and be ready to start cutting
[13:20:41] <TurBoss> i'm not familiar xD
[13:20:42] <TurBoss> i used renisaw cyclone2 wich has no User interface
[13:21:10] <lcvette[m]2> ok, it uses the box entries hazzy made
[13:21:16] <lcvette[m]2> the step off width i made instructions for
[13:22:16] <TurBoss> ok
[13:23:01] <lcvette[m]2> it probes z near the corner first to find the stock surface zero height, then steps off in x towards the corner you selected and probes the x side wall, then goes over and probes in Y. then it returns to xyz zero on the newly found corner
[13:23:17] <TurBoss> the system i used has a input for search direction like y- and travel speed
[13:23:30] <lcvette[m]2> right
[13:23:42] <lcvette[m]2> this has a fast feed and slow feed
[13:23:48] <TurBoss> point 1,2
[13:23:58] <lcvette[m]2> those are entered and can be changed at any time you want or entered and left alone
[13:24:11] <TurBoss> ohhh
[13:24:17] <TurBoss> great
[13:24:23] <TurBoss> sorry must afk
[13:24:27] <TurBoss> latter
[13:25:00] <lcvette[m]2> these are nice in that you just get the probe "near your target" point
[13:25:08] <lcvette[m]2> ok
[13:44:40] <hazzy1[m]> Lcvette: those buttons look absolutely killer!!!
[14:08:02] <lcvette[m]2> yeah?
[14:08:11] <lcvette[m]2> you think they will be well received?
[14:08:27] <lcvette[m]2> turBoss was lost and he was the very first viewer
[14:08:27] <lcvette[m]2> lol
[14:08:32] <lcvette[m]2> did not instill much confidence
[14:08:33] <lcvette[m]2> lol
[14:19:15] <hazzy-lab> Absolutely! I think they are very clear
[14:19:57] <hazzy-lab> the the little green thing even looks like the origin marker in the LCNC backlplot, so it will be consistent
[14:20:01] <lcvette[m]2> I think anyone familiar with PP will be like WTF
[14:20:05] <hazzy-lab> LOLO
[14:20:13] <lcvette[m]2> and anyone familiar with MSM will be like hell yeah
[14:20:27] <lcvette[m]2> and once anyone uses it they will be like, this is way better than PP
[14:20:27] <hazzy-lab> yeah
[14:20:35] <hazzy-lab> I think so!
[14:21:05] * hazzy-lab goes to bleed the breaks and clutch
[14:22:49] * lcvette[m]2 uploaded an image: probe_circle_pocket_center_z_button.png (284KB) < https://matrix.org >
[14:23:14] <lcvette[m]2> i goofed on this one, redoing it, the lighting scene is different
[14:23:18] <lcvette[m]2> fixing it now
[14:23:23] <lcvette[m]2> its too light
[14:23:26] <lcvette[m]2> ok see ya later!
[14:23:42] <lcvette[m]2> bleed the brakes too
[14:29:12] <hazzy1[m]> Lol,
[15:03:00] * lcvette[m]2 uploaded an image: probe_circle_pocket_center_z_button.png (316KB) < https://matrix.org >
[15:32:12] * lcvette[m]2 uploaded an image: probe_rectanglular_pockets_center_z_button.png (217KB) < https://matrix.org >
[16:21:56] * lcvette[m]2 uploaded an image: probe_round_boss_z_button.png (142KB) < https://matrix.org >
[16:25:32] * lcvette[m]2 uploaded an image: probe_round_boss_z_button_2.png (138KB) < https://matrix.org >
[16:25:43] <lcvette[m]2> not sure which is better there?
[16:37:33] <hazzy1[m]> That's a hard, I guess the first one
[16:39:29] <lcvette[m]2> ok
[16:40:51] <lcvette[m]2> inkscape is not very friendly to use
[16:41:02] <lcvette[m]2> i don't like it
[16:41:03] <lcvette[m]2> there are too many buttons
[16:41:41] <lcvette[m]2> and it isn't very intuitive
[16:47:11] <hazzy1[m]> I thought you liked lots of buttons 😂
[16:47:40] <lcvette[m]2> have you seen inkscape?
[16:47:53] <lcvette[m]2> there are a bazillion buttons
[16:48:24] <lcvette[m]2> and ironically for a graphics program, the icon graphics leave alot to be desired
[16:59:25] * lcvette[m]2 uploaded an image: probe_rectangular_boss_z_button.png (213KB) < https://matrix.org >
[17:20:47] -!- hazzy-dev has joined #hazzy
[17:32:14] * lcvette[m]2 uploaded an image: probe_group.PNG (1099KB) < https://matrix.org >
[17:32:37] <lcvette[m]2> thought that was a neat shot
[18:27:48] * lcvette[m]2 uploaded an image: probe_top_left_side_button.png (216KB) < https://matrix.org >
[18:37:24] <hazzy-lab> Lcvette: you are doing these in SolidWorks? They look great
[18:37:51] <lcvette[m]2> yes
[18:38:21] <hazzy-lab> And Photo360 for the rendering?
[18:38:39] <lcvette[m]2> no rendering
[18:38:57] <lcvette[m]2> this is straight off real view graphics
[18:38:58] <hazzy-lab> Oh, just real view!
[18:39:15] <lcvette[m]2> yeah i think it actually comes ou better
[18:39:34] <hazzy-lab> I never have had a workstation that could run realview :)
[18:39:46] <lcvette[m]2> this is my first
[18:39:48] <lcvette[m]2> i LOVE it
[18:39:51] <hazzy-lab> I think it is better than rendering, Photo360 sucks
[18:40:04] <lcvette[m]2> yeah i was wrestling with the lighting
[18:40:12] <hazzy-lab> I usually use keyshot if I need something presentable
[18:40:15] <lcvette[m]2> it looked great like this but in render mode it got wonky
[18:40:49] <hazzy-lab> but that real view is pretty impresve
[18:41:06] <lcvette[m]2> yeah
[18:41:30] <lcvette[m]2> that is also being saved in solidworks as a .png
[18:41:34] <lcvette[m]2> which help
[18:41:41] <lcvette[m]2> i can save it as a high res
[18:42:12] <lcvette[m]2> but
[18:42:16] <lcvette[m]2> no svg
[18:42:19] <lcvette[m]2> :(
[18:42:35] <lcvette[m]2> gonna have to investigate a way to work around that
[18:42:50] <lcvette[m]2> because i think these look way better than what i could make myself in inkscape
[18:43:09] <lcvette[m]2> im sure a pro could blow these away in inkscape
[18:43:11] <lcvette[m]2> but im no pro
[19:01:04] * lcvette[m]2 uploaded an image: probe_group_buttons.png (570KB) < https://matrix.org >
[19:01:32] <lcvette[m]2> beginning to take shape
[19:01:52] <hazzy-lab> That looks awesome!
[19:02:01] <hazzy-lab> I need to get busy ...
[19:03:25] <hazzy-lab> Your PC is almost ready, I put QtPyVCP on and it and will set up a sim machine with the probe screen so you can play with it
[19:03:49] <lcvette[m]2> outstanding!
[19:04:02] <hazzy-lab> also adding README.txt files all over to hopefully explain things
[19:04:02] <lcvette[m]2> I will be ready to start making some routines
[19:04:13] <lcvette[m]2> i like it!
[19:04:51] <hazzy-lab> I am falling in love with it, it the only problem, lol
[19:05:11] <lcvette[m]2> lol
[19:05:21] <lcvette[m]2> don't you have 3 more?
[19:06:20] <hazzy-lab> I do, but I spent the time to get this one set up right, since I don't want you to have to problems, lol
[19:06:43] <lcvette[m]2> can you make a copy of the entire thing?
[19:06:47] <lcvette[m]2> and transfer it?
[19:07:12] <hazzy-lab> I have been thinking about that, should be possible
[19:07:17] <lcvette[m]2> again...lcvette only knows enough about computers to get himself in trouble
[19:15:50] <lcvette[m]2> ok, my lower back is spent from sitting in this stool all day, time for the recliner
[19:16:59] <lcvette[m]2> im going to put a z only probe right in the middle of that big group of probe buttons
[19:17:07] <lcvette[m]2> should make for a great probe pack
[19:17:18] <lcvette[m]2> then the boss and pocket group
[19:18:18] <lcvette[m]2> think we need a inside corner group?
[19:18:29] <lcvette[m]2> i always used the side group to get inside corners
[19:19:19] <lcvette[m]2> took two but was real easy since it is a one button push for each one and only have to rough locate on the top of the part and it goes back after each routine fniishes to the z clearance height
[19:19:36] <lcvette[m]2> i think it would be a bit over the top to do inside corners
[19:19:38] -HaikuBot[m]:#hazzy- i think it would be
[19:19:39] -HaikuBot[m]:#hazzy- a bit over the top to
[19:19:40] -HaikuBot[m]:#hazzy- do inside corners
[19:19:50] <lcvette[m]2> but i can add
[19:20:28] <lcvette[m]2> hell I'll add it
[19:20:43] <lcvette[m]2> it should be the be all end all probe screen that destroys all other probe screens
[19:35:48] <hazzy-lab> LOL, might as well while your at it
[19:37:43] <lcvette[m]2> we are going to need some tabs for the probe groups
[19:37:57] <lcvette[m]2> or some swipe screens
[19:59:16] <hazzy-lab> Ok, that is fine, actually think it is better to break things up so the screen does not get too busy
[20:00:19] <lcvette[m]2> I agree
[20:01:45] <lcvette[m]2> I'd rather have bigger buttons, and more grouped screens
[20:02:07] <lcvette[m]2> This one second to hit a tab
[20:02:08] <lcvette[m]2> Takes*
[20:06:35] -!- HaikuBot[m] has quit [*.net *.split]
[20:08:12] <hazzy-lab> HaikuBot: come back!
[20:08:31] <hazzy-lab> he no like us
[20:10:00] -!- TurBoss has quit [Ping timeout: 256 seconds]
[20:10:12] -!- RSSBot[turbosssp has quit [Ping timeout: 260 seconds]
[20:10:21] -!- Lcvette[m] has quit [Ping timeout: 240 seconds]
[20:10:36] -!- KurtJacobsonGitt has quit [Ping timeout: 256 seconds]
[20:10:37] -!- hazzy1[m] has quit [Ping timeout: 245 seconds]
[20:10:47] -!- lcvette[m]2 has quit [Ping timeout: 260 seconds]
[20:10:48] -!- DSNTravellerbot[ has quit [Ping timeout: 260 seconds]
[20:11:01] -!- JoseLuisGitter[m has quit [Ping timeout: 256 seconds]
[20:11:11] -!- gitterbot[m] has quit [Ping timeout: 276 seconds]
[20:36:40] <hazzy-lab> lonely in here :(
[20:43:39] <hazzy-lab> logs
[20:47:19] -!- hazzy1[m] has joined #hazzy
[20:47:20] -!- Lcvette[m] has joined #hazzy
[20:47:20] <hazzy1[m]> yeah, you must have noticed right when the split started
[20:47:21] <hazzy1[m]> LOL, and the Haiku Bot is here too still
[20:47:22] <Lcvette[m]> That's because they don't know the awesomeness that's happening in here
[20:47:22] <hazzy1[m]> It is where the IRC node become split off or become disconnected, so you loose communication
[20:47:22] <Lcvette[m]> Haiku will never let us down
[20:47:22] <hazzy1[m]> LOL, he did though: http://irc-logs.kcjengr.com
[20:47:23] <Lcvette[m]> What's a split?
[20:47:23] <hazzy1[m]> This matrix room seems fine, I guess it is on a different network
[20:47:23] -!- HaikuBot[m] has joined #hazzy
[20:47:24] <Lcvette[m]> Type*
[20:47:24] <hazzy1[m]> Ah, you caused it!
[20:47:25] <Lcvette[m]> I could take one in the box but not send it
[20:47:25] -HaikuBot[m]:#hazzy- This matrix room seems
[20:47:25] <Lcvette[m]> My computer are up right before I got off
[20:47:26] -HaikuBot[m]:#hazzy- fine, I guess it is on a
[20:47:26] <Lcvette[m]> I could not send a message
[20:47:26] -HaikuBot[m]:#hazzy- different network
[20:47:27] <Lcvette[m]> Acted*
[20:47:27] <Lcvette[m]> Probably
[20:47:39] <hazzy1[m]> and were back!
[20:47:39] <Lcvette[m]> Ahh
[20:47:55] -!- DSNTravellerbot[ has joined #hazzy
[20:48:00] <Lcvette[m]> I fixed!
[20:48:07] <hazzy-lab> LOL
[21:04:26] <Lcvette[m]> I can't get linuxcnc anymore
[21:05:15] <Lcvette[m]> Freenode doesn't show it a available on my tablet
[21:05:32] <hazzy-lab> Your right, it is still gone
[21:05:47] <hazzy-lab> also, TurBoss is still done here
[21:05:51] <hazzy-lab> gone*
[21:06:04] <hazzy-lab> Must not be fixed yet
[21:09:23] * Lcvette[m] uploaded an image: Screenshot_2018-07-19-21-08-33.png (57KB) < https://matrix.org >
[21:10:09] <hazzy-lab> heh, thats not good
[21:28:19] <Lcvette[m]> Got it back in my favorites
[21:28:28] <Lcvette[m]> No one is talking though
[21:28:35] <Lcvette[m]> Or talking to me...lol
[21:30:40] <hazzy-lab> lol, they are talking to you
[21:30:44] <hazzy-lab> can you not see?
[21:33:17] <hazzy1[m]> lol, something is wrong
[21:33:40] <hazzy1[m]> can you not see us talking in #linuxcnc?
[21:37:31] <Lcvette[m]> Nope
[21:37:40] <Lcvette[m]> Can you see me?
[21:37:53] <hazzy-lab> yes, lol, it is hilarious
[21:39:19] * hazzy1[m] uploaded an image: Screenshot_2018-07-19_21-39-03.png (85KB) < https://matrix.org >
[21:39:25] <hazzy1[m]> LOL
[21:42:01] <Lcvette[m]> Must be something on my end
[21:42:05] <Lcvette[m]> I'm looking
[21:42:23] <hazzy-lab> I just joint linuxcnc on matrix too
[21:45:37] -!- GitterIntegratio has joined #hazzy
[21:45:38] -!- TurBoss[m] has joined #hazzy
[21:45:38] -!- Lcvette[m]1 has joined #hazzy
[21:45:43] <Lcvette[m]> Do that go through?
[21:46:25] * Lcvette[m] uploaded an image: Screenshot_2018-07-19-21-46-01.png (71KB) < https://matrix.org >
[21:46:33] <hazzy1[m]> Yes, but I responded and you could not see it, strange
[21:46:56] <Lcvette[m]> Yeah must be this matrix thing
[21:47:25] <hazzy1[m]> yes
[21:47:39] <hazzy1[m]> anyway, I'm, off to eat cake
[21:47:54] <Lcvette[m]> Sounds good!
[22:00:19] -!- hazzy[m] has joined #hazzy
[22:00:19] -!- RSSBot[turbosssp has joined #hazzy
[22:00:19] -!- KurtJacobsonGitt has joined #hazzy
[22:00:19] -!- JoseLuisGitter[m has joined #hazzy
[22:37:40] hazzy1[m] is now known as hazzy1[m]1
[22:43:30] hazzy1[m]1 is now known as hazzy1[m]2
[22:49:31] hazzy1[m]2 is now known as hazzy-m
[23:06:05] <hazzy-m> #test
[23:07:33] <Lcvette[m]> I see your new picture!
[23:08:18] <hazzy-m> I see yours too!
[23:08:20] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]
[23:09:47] <Lcvette[m]> I'm making a new one now in Ivy draw
[23:09:53] <Lcvette[m]> lol
[23:10:17] <hazzy-lab> haha, the probe is pretty cool
[23:12:19] -!- hazzy-lab has quit [Quit: hazzy-lab]
[23:13:41] -!- hazzy-lab has joined #hazzy
[23:13:41] -!- mode/#hazzy [+o hazzy-lab] by ChanServ
[23:19:17] <hazzy-m> the probe is pretty cool!
[23:20:13] <Lcvette[m]> heh...was just a picture of the had on my phone
[23:21:09] <Lcvette[m]> I like yours mo betta
[23:22:04] <hazzy-m> haha
[23:22:06] <hazzy-m> I use that for everything :)
[23:25:17] <hazzy-m> hurray!
[23:26:21] <Lcvette[m]> what I miss?
[23:27:07] <hazzy-m> Oh, maybe you can't see it, I kicked @aircooled out of the channel
[23:27:30] <hazzy-m> He was being rude
[23:27:40] <hazzy-m> JK, he was one of my old accounts
[23:27:42] <Lcvette[m]> hahaha
[23:27:49] <Lcvette[m]> nice
[23:28:37] <hazzy-m> I don't know why it suck around here, but it was a pain to get rid of, took like 10 tries
[23:35:01] <Lcvette[m]> reinstalling riot on my tablet
[23:35:17] <Lcvette[m]> see of that fixes the Linuxcnc issue
[23:43:57] <hazzy-lab> I had the same problem with the #linuxcnc channel
[23:52:03] * Lcvette[m] uploaded an image: IMG-20180719-0003.png (114KB) < https://matrix.org >
[23:54:11] <hazzy-lab> I'm gonna sue for tm infringement
[23:54:30] <hazzy-lab> Round logo with initials is too close
[23:54:35] <hazzy-lab> xD
[23:55:16] <hazzy-lab> Looks good!
[23:55:39] <Lcvette[m]> now we're cooking with gas
[23:56:53] <hazzy-m> The matrix bridge is still down ..
[23:57:03] * hazzy-m sent a long message: < https://matrix.org >
[23:57:15] <Lcvette[m]> server is acting up tonight
[23:57:53] <Lcvette[m]> you can sue
[23:58:11] <hazzy-m> I wonder whats up
[23:59:16] <Lcvette[m]> I dunno
[23:59:26] <Lcvette[m]> everything is wonky
[23:59:53] <Lcvette[m]> too many wondows users