#hazzy | Logs for 2018-07-20
Back
[00:00:24] <Lcvette[m]> lol
[00:02:42] <hazzy-lab> haha
[00:05:44] <hazzy-lab> I was in a rush to get something 3d printed today, and my Linux laptop was down so I used the windows one, it sat for about an hour crunching the toolpath and then hung, so I gave up on it an got the linux one running, it took less than 30s using the same slicer, same part models and same config
[00:06:07] <hazzy-lab> they are identical laptops too, so that was not a factor
[00:06:27] <hazzy-lab> actually, the windows on has 8gb more ram
[00:07:54] <hazzy-lab> If it weren't for solidworks I would probably not need a windoze machine
[00:08:00] <hazzy-lab> which is a happy though :D
[00:08:08] <hazzy-lab> +t
[00:11:33] * hazzy-m sent a long message: < https://matrix.org >
[00:12:06] * hazzy-m is manually bridging the IRC room to matrix, lol
[00:12:54] <Lcvette[m]> Lol
[00:13:17] <Lcvette[m]> Yeah, I wish there were a way to run solidworks on Linux
[00:18:19] <Lcvette[m]> Maybe once these probe screens and GUI are finished, solidworks will see the awesomeness and make a free Linux compatible version to combat fusion360
[00:18:49] <Lcvette[m]> I'm pretty sure that's how it will go down
[00:18:59] <hazzy-lab> LOL
[00:19:08] <hazzy-lab> That would be great
[00:19:33] <hazzy-lab> but I will try to not get to excited, yet :D
[00:23:54] <hazzy-m> 12:19:00 AM - hazzy-lab: LOL
[00:23:55] <hazzy-m> 12:19:08 AM - hazzy-lab: That would be great
[00:23:56] <hazzy-m> 12:19:33 AM - hazzy-lab: but I will try to not get to excited, yet :D
[00:24:30] <hazzy-m> LOL, you'd think I'd learn that the IRC channel does not work :)
[00:25:55] <Lcvette[m]> I have up on it
[00:25:56] <Lcvette[m]> Gave
[00:30:02] <Lcvette[m]> I'm typing on it via the freenode web irc
[00:30:03] <Lcvette[m]> Can you see me?
[00:30:29] <hazzy-m> What is the calibration diameter value in MSM probe screen, is it wear or the actual probe dia?
[00:31:08] <hazzy-m> I can see you on Matrix, but not on freenode
[00:31:08] <Lcvette[m]> Wear
[00:31:21] <hazzy-m> Oh, now I see you on freenode, its laggy
[00:31:42] <hazzy-m> Thanks!
[00:32:36] <Lcvette[m]> I checked the log and last activity before me was you at 9:49
[00:36:04] <hazzy-m> that does not seems right
[00:36:07] <hazzy-m> that does not seems right
[00:37:52] <hazzy-m> That came thru twice on IRC, WTH
[00:38:44] <hazzy-lab> this is from freenode to matrix
[00:40:30] <Lcvette[m]> No clue
[00:40:33] <Lcvette[m]> It's busted
[00:42:30] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / TurboProbe ( https://gitlab.com )
[00:46:51] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / TurboProbe ( https://gitlab.com )
[00:48:12] <Lcvette[m]> Calibration diameter .75" :0
[00:49:11] <hazzy-lab> I thought I changed it to .0020
[00:49:12] <hazzy-lab> oops
[00:51:03] <hazzy-m> I thought I changed it to 0.0020
[00:51:04] <hazzy-m> Guess I took the screen shot before that, lol
[00:51:54] <Lcvette[m]> Lol
[00:52:03] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / TurboProbe ( https://gitlab.com )
[00:52:20] <hazzy-m> that was embarrassing
[00:52:30] <Lcvette[m]> I went and checked, the calibration diameter is the calculated diameter
[00:52:30] <hazzy-m> fixed :D
[00:53:11] <hazzy-m> I copy pasted from the Diameter hint box, that's why it was .75 xD
[00:53:44] <Lcvette[m]> Gotcha
[00:54:17] <hazzy-m> So have to change it AGAIN??
[00:54:24] <hazzy-m> LOL
[00:55:20] <hazzy-m> what size you usually use? .2", 3mm?
[00:55:20] <Lcvette[m]> When you run the calibration in msm, it sends the delta to the wear offset in the tool table, but displays the calculated probe diameter to that box
[00:56:01] <Lcvette[m]> Mind is a .125" ball and it displays .119"there
[00:56:16] <hazzy-m> hazzy: Ok, that makes sense
[00:56:36] <hazzy-m> How did I ping myself?
[00:56:51] <Lcvette[m]> Wear offset is 0.003"
[00:57:01] <hazzy-m> Ok. I will but that in, not that it matters
[00:58:31] <Lcvette[m]> No need on ours
[00:58:35] <Lcvette[m]> Was just explaining how msm worked
[00:58:56] <Lcvette[m]> We will use the offset you found
[00:59:31] <Lcvette[m]> Offsets*
[00:59:50] <hazzy-lab> Ok, I'll just let it rest for now then, it is basically a place holder at the moment
[01:12:48] <hazzy-m> 12:59:51 AM - hazzy-lab: Ok, I'll just let it rest for now then, it is basically a place holder at the moment
[01:13:06] <hazzy-m> still manually bridging, lol
[01:17:26] <Lcvette[m]> Yup
[01:37:15] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / TurboProbe ( https://gitlab.com )
[01:47:42] <Lcvette[m]> Sweet
[01:47:45] <Lcvette[m]> Sweet
[01:49:06] <hazzy-m> Yep, even put launchers on the desktop so all you have to do is point-n-click ✌
[01:49:49] <Lcvette[m]> That's awesomeness!!
[01:52:52] <Lcvette[m]> You have no idea how much appreciation I have for your efforts in this! I will return the investment in time and effort for this project and more going forward!
[02:00:32] <hazzy-m> I have no doubt you will, you already have done a lot of work! Thank you for being so gung-ho, your enthusiasm is contagious, and I really need that to keep on working on this!
[02:01:02] <hazzy-m> I had pretty much stopped working on GUI stuff for the past 6month because only a few people seemed interested
[02:04:26] <Lcvette[m]> I know what you mean, I like having a motivating group driving the effort, it's a recipe for success
[02:04:27] <Lcvette[m]> I know what you mean, I like having a motivating group driving the effort, it's a recipe for success
[02:04:46] <Lcvette[m]> I am not going to take my foot of the gas!
[02:06:08] <Lcvette[m]> I have gotten far to comfortable using msm over the years to give up my probing, and I hate every existing GUI available for LinuxCNC, but I need LinuxCNC for my big machine... So I am going to do whatever it takes to have probing, and help in whatever way I can with the path pilot clone gui
[02:06:43] <Lcvette[m]> You just tell me what you want me to make graphical wise and I'll knock it out
[02:07:03] <Lcvette[m]> I'll finish the probe stuff first
[02:10:01] <Lcvette[m]> For now though I'm gonna get some sleep, have some orders to get out in the morning before I can get back on the probe graphics
[02:10:14] <Lcvette[m]> 😀
[02:10:58] <Lcvette[m]> Night man!
[02:11:19] <hazzy-m> haha, I should get some sleep too I guess
[02:11:28] <hazzy-m> Thank you!
[02:11:48] <hazzy-m> night
[02:12:21] <Lcvette[m]> thank YOU!!
[02:12:42] <Lcvette[m]> and yes, get some sleep! it's late!!
[03:29:44] -!- hazzy-dev1 has joined #hazzy
[03:30:47] -!- hazzy-lab1 has joined #hazzy
[03:30:47] -!- mode/#hazzy [+o hazzy-lab1] by ChanServ
[03:31:08] -!- hazzy-lab has quit [Ping timeout: 276 seconds]
[03:31:08] -!- hazzy-dev has quit [Ping timeout: 276 seconds]
[03:31:08] hazzy-lab1 is now known as hazzy-lab
[03:31:09] hazzy-dev1 is now known as hazzy-dev
[03:31:47] -!- JoseLuisGitter[m has quit [Ping timeout: 276 seconds]
[03:44:15] -!- JoseLuisGitter[m has joined #hazzy
[05:42:48] -!- KurtJacobsonGitt has quit [Remote host closed the connection]
[05:42:49] -!- GitterIntegratio has quit [Read error: Connection reset by peer]
[05:42:52] -!- TurBoss[m] has quit [Remote host closed the connection]
[05:42:53] -!- HaikuBot[m] has quit [Read error: Connection reset by peer]
[05:42:55] -!- JoseLuisGitter[m has quit [Remote host closed the connection]
[05:42:55] -!- Lcvette[m]1 has quit [Remote host closed the connection]
[05:42:56] -!- DSNTravellerbot[ has quit [Write error: Connection reset by peer]
[05:43:01] -!- hazzy[m] has quit [Remote host closed the connection]
[05:43:01] -!- RSSBot[turbosssp has quit [Remote host closed the connection]
[05:43:01] -!- hazzy-m has quit [Remote host closed the connection]
[05:43:08] -!- Lcvette[m] has quit [Remote host closed the connection]
[05:53:14] -!- DSNTravellerbot[ has joined #hazzy
[06:37:26] -!- GitterIntegratio has joined #hazzy
[06:37:26] -!- hazzy-m has joined #hazzy
[06:37:26] -!- TurBoss[m] has joined #hazzy
[06:37:26] -!- HaikuBot[m] has joined #hazzy
[06:37:27] -!- Lcvette[m] has joined #hazzy
[06:37:33] -!- JoseLuisGitter[m has joined #hazzy
[06:37:33] -!- KurtJacobsonGitt has joined #hazzy
[06:37:33] -!- RSSBot[turbosssp has joined #hazzy
[06:37:34] -!- hazzy[m] has joined #hazzy
[06:37:35] -!- Lcvette[m]1 has joined #hazzy
[09:50:19] <Lcvette[m]1> you fixed it
[10:05:47] <hazzy-dev> I did
[10:05:59] <hazzy-dev> :D
[10:07:59] <Lcvette[m]1> you can boot any of me that doesn't have the logo
[10:08:00] <Lcvette[m]1> <---
[10:08:43] <hazzy-lab> haha, ok
[10:14:07] <TurBoss[m]> Hello
[10:14:23] <Lcvette[m]1> hello
[10:15:55] <hazzy-lab> hey TurBoss
[10:17:36] <Lcvette[m]1> mine is still broken
[10:17:50] -!- Lcvette[m] has parted #hazzy
[10:18:01] <Lcvette[m]1> I'll fix it later.. two international ship went on deadline to build and get out before DHL picks up at 2pm
[10:18:44] <Lcvette[m]1> crunch time
[10:18:45] <TurBoss[m]> lol kurt
[10:19:12] <hazzy-m> 😆
[10:21:56] <hazzy-lab> oops, did I boot the wrong Lcvette? xD
[10:45:12] <TurBoss[m]> no
[10:48:08] <Lcvette[m]1> no
[10:48:08] <Lcvette[m]1> I'm hete
[10:48:11] <Lcvette[m]1> here
[10:48:30] <hazzy-lab> ok,good
[10:48:57] <Lcvette[m]1> I still can't get my IRC connection working
[11:04:00] <TurBoss[m]> with the irc client or with the appservice?
[11:05:28] <TurBoss[m]> Lcvette (@lcvette:matrix.org):
[11:05:36] <TurBoss[m]> ping
[11:05:41] <hazzy-lab> ding
[11:06:05] <Lcvette[m]1> test
[11:06:13] <Lcvette[m]1> hey my desktop is working again
[11:06:32] <Lcvette[m]1> i had to clear my cache
[11:07:03] <hazzy-lab> great!
[11:07:16] <hazzy-lab> (get back to work)
[11:07:23] <TurBoss[m]> do you use the irc ffrom the matrix?
[11:07:33] <TurBoss[m]> xD
[11:07:38] <hazzy-lab> :D
[11:08:40] <Lcvette[m]1> can you see me on the irc?
[11:08:49] <hazzy-lab> Yes
[11:10:29] <Lcvette[m]1> outstanding
[11:10:40] <Lcvette[m]1> oh, let me know when you need a shipping label!
[11:11:24] <hazzy-lab> I will, just going to find the DVI card and should be ready to box it up
[11:12:19] <Lcvette[m]1> if it has hdmi i can get an hdmi switch
[11:12:47] <Lcvette[m]1> either or os fine
[11:12:53] <Lcvette[m]1> is*
[11:13:13] <hazzy-lab> I don't have a very spare power cored for it, do you have one layout around or should I include one?
[11:13:22] <hazzy-lab> OK
[11:13:30] <Lcvette[m]1> my video card for dual monitors outputs one dvi and one hdmi
[11:13:38] <hazzy-lab> great
[11:13:51] <Lcvette[m]1> i can get one
[11:13:58] <Lcvette[m]1> just the normal 3 prong
[11:14:02] <hazzy-lab> yes
[11:14:08] <Lcvette[m]1> k
[11:15:32] <Lcvette[m]1> and don't forget to let me know what ethernet thingy i need so its the same one
[11:21:21] <TurBoss[m]> what mesa card are you using
[11:23:07] <hazzy-lab> I think he said 7i76e or 7i77e, and maybe an additional I/O card
[11:24:15] <TurBoss[m]> should be 6 there is no 7 i think
[11:24:29] <TurBoss[m]> ok ty
[11:26:12] <hazzy-lab> Oh, your right, looks like there is not a 7i77e, what do people with servos do?
[11:27:03] <TurBoss[m]> pci or pcie
[11:27:32] <hazzy-lab> I guess so, that is too bad
[11:28:25] <hazzy-lab> It seems Ethernet would be perfect for a servo system because latency is not as much of a problem
[11:30:14] <TurBoss[m]> http://store.mesanet.com
[11:30:35] <TurBoss[m]> jt toldme this one
[11:42:48] <Lcvette[m]1> I use a 7i92/7i76/7i77
[11:43:36] <Lcvette[m]1> the 7i92 is Ethernet equivalent to the 5i25/6i25 pci card
[11:44:18] * Lcvette[m]1 uploaded an image: VectorImage_2018-07-20_114358.jpg (426KB) < https://matrix.org >
[11:45:13] <Lcvette[m]1> but I was referring to the wifi ethernet adapter
[11:45:24] <Lcvette[m]1> lol
[11:46:06] <TurBoss[m]> ohh
[11:54:32] <Lcvette[m]1> my only linuxcnc system is my big machine which has a vertical panel interface, not conducive to programming
[12:02:48] * TurBoss[m] uploaded an image: VectorImage_2018-07-20_060235.jpg (641KB) < https://matrix.org >
[12:04:06] <hazzy-lab> Nice TurBoss!
[12:04:38] * TurBoss[m] uploaded an image: VectorImage_2018-07-20_060426.jpg (767KB) < https://matrix.org >
[12:04:40] <Lcvette[m]1> what's that? looks like a gear reduction
[12:04:41] <TurBoss[m]> hehe thanks
[12:05:26] <TurBoss[m]> yes
[12:06:37] * TurBoss[m] uploaded an image: VectorImage_2018-07-20_060625.jpg (802KB) < https://matrix.org >
[12:07:09] <TurBoss[m]> this is the arm
[12:08:06] <Lcvette[m]1> whatcha making?
[12:08:44] <TurBoss[m]> a robot arm
[12:08:50] <hazzy-lab> Lcvette: I could have sworn I had several DVI graphics cards, but all I can find is the FirePro 3D graphics one
[12:08:50] <hazzy-lab> So looks like all I can give you is a VGA and display port, can you make that work?
[12:09:10] <hazzy-lab> TurBoss: That is looking awesome
[12:09:54] <TurBoss[m]> hehe
[12:27:10] <Lcvette[m]1> did you say it had an HDMI output or just vga?
[12:28:10] <TurBoss[m]> display port?
[12:28:51] <hazzy-lab> I said it had a HDMI, but on closer inspection it was a display port :(
[12:29:59] <hazzy-lab> The one board graphics has VGA and Display port, and so does the graphics card
[12:31:15] <Lcvette[m]1> ok, what's a display port
[12:31:35] <TurBoss[m]> a kind of video conector like hdmi
[12:31:43] <Lcvette[m]1> is that something that looks like an HDMI?
[12:31:49] <Lcvette[m]1> bit not quite?
[12:32:04] <Lcvette[m]1> ok yeah I had to get an adapter
[12:32:29] <Lcvette[m]1> so I can just get an adapter like I did for my other monitor
[12:32:37] <Lcvette[m]1> that works
[12:34:26] * Lcvette[m]1 uploaded an image: VectorImage_2018-07-20_123411.jpg (143KB) < https://matrix.org >
[12:34:36] * hazzy-m uploaded an image: display_connectors_0.png (62KB) < https://matrix.org >
[12:36:42] <Lcvette[m]1> so I can just get another adapter o think and then grab and HDMI switch box
[12:36:54] <Lcvette[m]1> should be good to ho
[12:36:54] <Lcvette[m]1> go
[12:37:06] <hazzy-lab> Ok, VGA to HDMI adapters are cheap and easy to get, so that should work!
[12:37:08] <hazzy-lab> great!
[12:37:23] <Lcvette[m]1> ok
[12:37:26] <Lcvette[m]1> awesome
[12:37:28] <Lcvette[m]1> easy peasy
[12:37:40] <Lcvette[m]1> o didn't even know they made vga to HDMI
[12:37:59] <hazzy-lab> neither did I until about 30s ago
[12:38:11] <hazzy-lab> https://www.ebay.com
[12:38:27] <hazzy-lab> Oh, that is form china
[12:44:00] <hazzy-lab> I guess this is what you need: http://a.co
[12:44:19] <hazzy-lab> seems like a pain, but should work
[13:09:51] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[13:19:56] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[14:00:40] * hazzy-lab is cloning the HDD
[14:00:56] <hazzy-lab> its 250GB, wonder how long it will take ...
[14:05:46] <hazzy-m> the matrix bridge is down again ...
[14:06:26] <hazzy-m> 2:00:41 PM * hazzy-lab is cloning the HDD
[14:06:27] <hazzy-m> 2:00:56 PM - hazzy-lab: its 250GB, wonder how long it will take ...
[14:06:41] <hazzy-m> hazzy bridge is reinstated
[14:23:21] <Lcvette[m]1> sweet!! figured out how to do it?
[14:23:51] <Lcvette[m]1> now you'll be able to tell me exactly where to go to get or do something..lol
[14:25:02] <Lcvette[m]1> Lcvette (@lcvette:matrix.org): is building a couple extra pumps for inventory
[14:26:40] * Lcvette[m]1 uploaded an image: VectorImage_2018-07-20_022557.jpg (327KB) < https://matrix.org >
[14:35:39] <hazzy-m> Whoa! Those look nice. What are they for?
[14:58:05] <hazzy-m> cloning is finished!!
[14:58:44] <hazzy-m> said it copied 320GB, so I guess they are not 250GB drives 😆
[15:01:38] -!- hazzy-c has joined #hazzy
[15:07:08] <Lcvette[m]1> lol...that's awesome
[15:07:08] <TurBoss[m]> oh amazing
[15:07:09] <Lcvette[m]1> BMW fuel pumps
[15:07:10] <Lcvette[m]1> my business
[15:07:11] <Lcvette[m]1> boostconcepts.net
[15:17:12] -!- hazzy-c has quit [Ping timeout: 252 seconds]
[15:26:31] <hazzy-m> that is awesome!
[15:26:45] -!- Roguish has joined #hazzy
[17:16:05] -!- RSSBot[turbosssp has quit [Ping timeout: 245 seconds]
[17:16:34] -!- hazzy[m] has quit [Ping timeout: 260 seconds]
[17:16:35] -!- hazzy-m has quit [Ping timeout: 260 seconds]
[17:16:37] -!- JoseLuisGitter[m has quit [Ping timeout: 260 seconds]
[17:16:51] -!- GitterIntegratio has quit [Ping timeout: 240 seconds]
[17:16:53] -!- TurBoss[m] has quit [Ping timeout: 245 seconds]
[17:16:58] -!- HaikuBot[m] has quit [Ping timeout: 256 seconds]
[17:17:02] -!- DSNTravellerbot[ has quit [Ping timeout: 260 seconds]
[17:17:06] -!- KurtJacobsonGitt has quit [Ping timeout: 256 seconds]
[17:17:23] -!- Lcvette[m]1 has quit [Ping timeout: 276 seconds]
[18:09:16] -!- DSNTravellerbot[ has joined #hazzy
[18:11:50] -!- Lcvette[m] has joined #hazzy
[18:11:51] <Lcvette[m]> yeah no chance of drilling it
[18:11:55] <Lcvette[m]> wonder if i could tig a little dimpl on it
[18:12:44] <Lcvette[m]> or maybe fuse the tungste real fast to the threaded portion and wind it out with the tungsten
[18:12:45] <Lcvette[m]> hmmm
[18:12:47] <Lcvette[m]> that would be trick
[18:13:00] <Lcvette[m]> i'll try that tomorrow
[18:13:36] -!- hazzy-m has joined #hazzy
[18:13:38] <hazzy-m> That is a very good idea
[18:13:42] <hazzy-m> or get missr0 to EDM it out ...
[18:14:35] <Lcvette[m]> lol... this is all to save a $15 dial indicator
[18:14:57] <Lcvette[m]> but the reality is it will cost $40 to ship it and have it before fall from china
[18:16:13] <hazzy-m> Hehe, it becomes a challenge though
[18:17:29] <Lcvette[m]> i just want to be able to measure my tools
[18:18:12] <Lcvette[m]> i just reassembled it
[18:18:26] <Lcvette[m]> it works but i will have to count the revolutions it turns on the way to zero
[18:19:11] <Lcvette[m]> not ideal, but it will at least get me by until i finda better solution.. i think at this point it is smart to let it be and order a replacement indicator snail mail from china and replace it when it arrives
[18:20:26] <hazzy-m> What you need it an electronic tool setter, you could probably have made one in the time you have spent messing with this on, lol
[18:21:02] <Lcvette[m]> yeah, but they are hard to use a probe with
[18:22:53] <Lcvette[m]> i was looking at this and thinking about making an electronic tool setter with it that i could adjust so that it would trigger at the same exact refeence height as the ground calibration bar plane
[18:23:21] <Lcvette[m]> that way i coule probe the calibration plane with the probe and touch off all the tools and then i'd be a happy camper
[18:24:44] <Lcvette[m]> with mach3 it was easy because you could use a ground activated tool setter
[18:24:56] <Lcvette[m]> which needed no movement
[18:25:17] <Lcvette[m]> just basically a block with a ground lead tot he bob
[18:25:24] <Lcvette[m]> seperated from the machine by plastic
[18:26:30] <Lcvette[m]> but with mesa it has to be positive input voltage which won't work that way
[18:30:45] <hazzy-m> You can absolutely use a touch of plate with mesa, all might need to add a pull up, but that would be it
[18:31:14] <hazzy-m> all = you xD
[18:31:50] <hazzy-m> Like this: https://forum.linuxcnc.org
[18:32:06] <Lcvette[m]> hmmmm
[18:32:11] <Lcvette[m]> let me go read...... brb
[18:44:17] <Roguish> guys, see if you can view this,please: http://noelrodes.weebly.com
[18:51:56] -!- GitterIntegratio has joined #hazzy
[18:51:56] -!- TurBoss[m] has joined #hazzy
[18:51:57] -!- HaikuBot[m] has joined #hazzy
[18:52:03] -!- hazzy[m] has joined #hazzy
[18:52:03] -!- RSSBot[turbosssp has joined #hazzy
[18:52:03] -!- KurtJacobsonGitt has joined #hazzy
[18:52:03] -!- JoseLuisGitter[m has joined #hazzy
[19:09:10] <Lcvette[m]> Yeah man!!!! Looks awesome!!!
[19:12:30] <Roguish> thanks. i'm slowly adding to the site. sort of a portfolio. if i use the 'paid' side, I can add videos. so far i'm still cheap.....
[19:13:23] <Lcvette[m]> Stay cheap as long as you can
[19:13:35] <Lcvette[m]> Over head sucks
[19:15:23] <Roguish> just enabled ssl, it's free.
[19:24:42] <Lcvette[m]> What's ssl?
[19:25:05] <Roguish> https note the 's' a secure thing.
[19:25:30] <Lcvette[m]> Ah
[19:26:03] <Lcvette[m]> Secure socket layer
[19:26:04] <Lcvette[m]> ?
[19:30:21] <hazzy-lab> Roguish: That is awesome!
[19:30:45] <hazzy-lab> You used the same theme I did :D
[19:30:46] <hazzy-lab> https://kurtjacobson.weebly.com
[19:31:09] <Roguish> there ya go.
[19:31:51] <Roguish> who was making the touch probe? that you Lcvette?
[19:32:22] <hazzy-lab> I have not looked at my site in years, I had done some custom tweaks, they are gone :(
[19:32:54] <hazzy-lab> Yes, that was Lcvette
[19:33:00] <hazzy-lab> Pretty neat
[19:33:20] <hazzy-lab> You helped with the IR part?
[19:33:41] <Roguish> not sure. don't think so. not very good at electronics.
[19:36:12] <hazzy-lab> Ok, I must have you mixed up with someone else
[19:40:17] <Lcvette[m]> Yes that was me!!
[19:40:36] <Lcvette[m]> But it's on hold until after we finish the probing screens
[19:49:03] <hazzy-lab> afk for a quick evening bike ride
[21:47:33] <Lcvette[m]> Stay safe!!
[21:47:37] <Lcvette[m]> Rubber side down!
[21:53:56] <hazzy-lab> ... and shiny side up
[22:31:20] <Lcvette[m]> That's right!!
[22:31:52] <Lcvette[m]> So you got everything done on that work station for the cloning?
[22:32:12] <Lcvette[m]> It worked?
[22:39:55] <hazzy-lab> Yep, I got it cloned. It took a little fiddling to get the cloned drive to boot, but I got it
[22:42:33] <hazzy-lab> I got it boxed it up. It was about 120F in loft so I may not have done a great job, lol, I will check it in the morning and is should be ready to ship
[22:43:03] <hazzy-lab> I'll give you the dimensions and weight
[22:43:09] <Lcvette[m]> Oh man, sweltering
[22:43:40] <Lcvette[m]> Sounds good!
[22:44:49] <Lcvette[m]> I'm super excited to get her fired up and test out writing some probe routines to test run
[23:03:20] <hazzy-lab> 18 x 18 x 8 22lbs
[23:05:38] <Lcvette[m]> perfect
[23:05:58] <Lcvette[m]> what is your name and address for the sender info
[23:06:08] <Lcvette[m]> or..you can email it to me if you want
[23:06:14] <Lcvette[m]> Lcvette1@yahoo.com
[23:06:27] <Lcvette[m]> or private it to me
[23:06:35] <hazzy-lab> will do!
[23:08:36] <TurBoss[m]> york
[23:08:38] <TurBoss[m]> oops
[23:08:46] <TurBoss[m]> wrong room
[23:08:50] <hazzy-m> LOL
[23:09:11] <hazzy-m> No I am curious, york what? xD
[23:09:11] <TurBoss[m]> I'm spaming #test:springrts.com
[23:09:32] <TurBoss[m]> I'll peek
[23:09:32] <TurBoss[m]> lol
[23:10:20] <hazzy-m> Lcvette: Did you get my PM?
[23:12:44] * TurBoss[m] uploaded an image: Peek 21-07-2018 05-12.gif (1536KB) < https://matrix.org >
[23:13:58] <TurBoss[m]> its Glenda my pet
[23:14:17] <Lcvette[m]> yes!
[23:14:22] <Lcvette[m]> whats easier for you USPS or Fedex?
[23:14:44] <hazzy-m> USPS, but either way really
[23:14:56] <Lcvette[m]> same same for me
[23:15:15] <Lcvette[m]> USPS it is!
[23:16:20] <hazzy-m> I know the USPS guy pretty so he comes up and asks if I have any packages, so I never have to go to the post office!!!
[23:16:28] <Lcvette[m]> nice!
[23:17:05] <hazzy-m> TurBoss: That is serious spam xD
[23:17:17] <hazzy-m> That is pretty neat
[23:17:37] <TurBoss[m]> it bridges the matrix with the springrts lobby server
[23:17:37] <Lcvette[m]> check PM
[23:17:38] <TurBoss[m]> :D
[23:17:51] <TurBoss[m]> will spam latter
[23:19:26] <Lcvette[m]> hazzy: check our PM
[23:20:09] <hazzy-m> Lcvette: I don't see anything :(
[23:20:54] <hazzy-m> TurBoss: I made an email client for sending notifications from my weather station, I tested it by sending emails to myself and gmail decided I was a spammer and blocked my account xD
[23:20:56] <Lcvette[m]> no?
[23:21:13] <hazzy-m> no, still broken?
[23:21:26] <TurBoss[m]> send matrix messages lol
[23:21:36] <TurBoss[m]> I can write you a bot
[23:22:04] <hazzy-m> Haha, I should use matrix instead!
[23:22:26] <TurBoss[m]> https://github.com
[23:22:38] <hazzy-m> Lcvette: Did you PM on matrix or on IRC?
[23:24:00] <Lcvette[m]> the one you sent me your address on
[23:24:25] <hazzy-m> Hmm, it's not coming thru
[23:24:40] <Lcvette[m]> i closed it out now
[23:28:24] <Lcvette[m]> yeah freenode SUCKS!
[23:28:29] <Lcvette[m]> matrix rocks