#hazzy | Logs for 2018-08-06

Back
[00:00:31] <hazzy-lab> oxygen goes down to only about 14% at 1000ft, which is very noticeable
[00:01:36] <hazzy-lab> 10,000ft*
[00:01:46] <Lcvette[m]> Yeah for sure
[00:01:53] <Lcvette[m]> Need turbo
[00:01:55] <Lcvette[m]> Lol
[00:02:00] <hazzy-lab> hahaha
[00:02:01] <hazzy-lab> yes
[01:19:42] <jesseg> I have a favorite mountain lake in my area that's at 6000 feet. But the surrounding peaks are only 7000 feet.
[01:20:23] <hazzy-lab> jesseg: very nice!
[01:20:29] <hazzy-lab> where are you?
[01:20:42] <jesseg> Washington state, western
[01:20:47] <hazzy-lab> ok
[01:21:58] <jesseg> hazzy-dev, here's the lake: https://www.google.com!3m1!1e3!4m5!3m4!1s0x548fb8dcc2878457:0x7adc8aefce83b180!8m2!3d48.0795365!4d-123.1018438
[01:22:03] <jesseg> it has 18 inch fish in it
[01:22:58] <hazzy-lab> beautiful!
[01:23:15] <jesseg> it's even more beautiful from the ground lol
[01:23:42] <hazzy-lab> broken top maintain near bend has a similar lake
[01:23:48] <hazzy-lab> I think it is about 9000ft
[01:23:54] <jesseg> cool!
[01:23:58] <jesseg> bend, as in Oregon?
[01:24:04] <hazzy-lab> there was still about 4ft of snow up there last july, lol
[01:24:05] <hazzy-lab> yes
[01:24:15] <jesseg> are you in OR?
[01:24:23] <jesseg> if so we're not that far apart as the world goes :P
[01:24:52] <hazzy-lab> No, I am in Atlanta Ga, about as far away as we can be and still be in the US!
[01:25:02] <jesseg> oh yeah that is a far long ways
[01:25:17] <hazzy-lab> But I like hiking up near you
[01:25:26] <hazzy-lab> it is a bit of a drive though ....
[01:25:51] <jesseg> I'll say LOL
[01:26:03] <jesseg> but yeah if you're ever in WA ring me up and we go hiking
[01:26:04] -HaikuBot[m]:#hazzy- but yeah if you're
[01:26:05] -HaikuBot[m]:#hazzy- ever in WA ring me up
[01:26:06] -HaikuBot[m]:#hazzy- and we go hiking
[01:26:19] <jesseg> LOL what?
[01:26:43] <hazzy-lab> I'll let you know, that would be fun!
[01:26:55] <hazzy-lab> lol, you wrote a poem
[01:27:30] <jesseg> anyway, I'm right in Sequim, right now I have a GPS guided water and solar powered sprinkler robot out in the cow pasture following this path: https://drive.google.com
[01:27:40] <jesseg> except it's sleeping right now because the sun has gone down
[01:28:14] <jesseg> I guess if that goes for poetry the world is in a sad state :D
[01:28:20] <hazzy-lab> I saw the vid of the sprinkler, that is stinking awesome!!
[01:28:25] <jesseg> ok cool
[01:29:06] <hazzy-lab> you with your sprinkler, and wolf with is mower, lol
[01:29:34] <jesseg> we should team up him and I, make an all in one mower waterer fertilizer weeder
[01:30:20] <hazzy-lab> hahah, for real
[01:30:32] <hazzy-lab> you are close to the watter, WAY north
[01:30:49] <jesseg> Yes, it's like on a clear day you see L A
[01:30:52] <jesseg> except
[01:31:00] <jesseg> if I climb a tree, canada I can see.
[01:31:10] <jesseg> where's your poetry bot now? :D
[01:31:12] <hazzy-lab> that is neat
[01:34:48] <hazzy-lab> Last summer I drove up the east coast to Montreal, and then drove alone the US/CA border, stopping short of washington to cut down to bend, then drove down the west coast and along the southern border back to Georgia
[01:34:54] <hazzy-lab> Camped the whole way with 8 of my nieces and nephews, it was a blast!
[01:35:05] <jesseg> Some friends of mine have some kids (15-22 age ranges) who were home for Christmas break from college and they wanted to go snow camping so I took them up snow camping the day after Christmas. A few months later, the crazy kids wanted to do it again, so we went up to a different spot where there was like 4-7 foot snow still. we had a blast though, sliding down the mountain slopes on our butts or bellies
[01:35:08] <hazzy-lab> but 12000miles in one month camping was a bit much ...
[01:35:24] -!- Erikcnc has quit [Ping timeout: 260 seconds]
[01:35:25] <jesseg> oh that does sound like a blast
[01:35:49] <hazzy-lab> that sounds fun!
[01:36:24] <jesseg> Yeah it was a lot of fun. But keeping our feet dry and warm was a struggle since we only had one pair of actual snow boots among us :P
[01:37:10] <jesseg> I actually got hooked on hammock camping a number of years ago, and I'm about to try sewing up a special down filled sleeping bag that goes around the outside of the hammock so I don't need a mattress
[01:37:12] <hazzy-lab> haha, cold toes part would not be fun
[01:37:34] <jesseg> yeah... and unless you have the correct kind of boots (i.e. bunny boots) your feet will always melt snow and get wet lol
[01:37:42] <hazzy-lab> that is a good idea, and keeps stuff from getting as wet
[01:43:21] <hazzy-lab> jesseg: This is that lake on the top of Broken Top, the pic does not do it justice. If you get a chance to go down there its is well worth the climb to see: https://i.imgur.com
[01:44:02] <jesseg> oh wow that is nice. Looks similar to my favorite Goat Lake here, just I think yours looks bigger
[01:44:24] <jesseg> and higher
[01:45:20] <jesseg> Is that the no-name lake?
[01:46:31] <hazzy-lab> yes it is!
[01:46:55] <jesseg> cool! I'm googling it
[01:47:20] <jesseg> 13.2 miles, some distance, but only 2430 feet elevation gain
[01:48:02] <jesseg> my lake is like 3700 feet gain, but maybe 8 miles or something
[01:48:50] <jesseg> it's pretty steep on the second half of the trail lol
[01:48:51] <hazzy-lab> it is not a bad hike at all, if you have alll day, we did it with 8 kids between 1 and 16 yrs old, lol
[01:49:06] <jesseg> can you camp up there?
[01:49:21] <hazzy-lab> Yes, there are a couple of nice sites
[01:49:24] <jesseg> cool
[01:50:08] <jesseg> there are lots of nice sites for me. I have some 4" wide soft nylon strap slings so I can harness any two trees for my hammock without damaging them :D
[01:50:23] <jesseg> I don't need level ground :D
[01:51:12] <hazzy-lab> that makes finding a good site much easier!
[01:51:23] <jesseg> yeah!
[01:51:48] <hazzy-lab> we made the mistake of useing two 8 person tents, it was almost imposible to find a place to set both up
[01:52:05] <hazzy-lab> we would have done better withmultiple small tents
[01:52:10] <jesseg> It's fun too, like last month I took those same kids camping up there, and all 4 or 5 of us had hammocks and we put them in a large semi circle
[01:52:31] <hazzy-lab> nice
[01:52:38] <jesseg> oh yeah, small tents would have been easier in alpine places like that
[01:52:49] <jesseg> or whatever you call those places that are short on level spots
[01:53:58] <jesseg> oh cool looks like broken top no-name lake is in NF
[01:54:03] <jesseg> I love NF
[01:55:00] <jesseg> at least in WA NF, you can just go camping wherever your heart desires. No need for permits, designated campsites, or official toilets and you can even take a dog or a cat if you feel so inclined LOL
[01:55:31] <jesseg> the national park here, on the other hand... *ahem*
[01:56:43] <hazzy-lab> yes, it is that way there to, camp wherever you like, it is very nice!
[01:56:49] <hazzy-lab> can't do that here
[01:57:02] <jesseg> why not?
[01:57:12] <jesseg> different state laws, or are you mostly surrounded by national park?
[01:58:14] <hazzy-lab> I guess it is state laws, maybe because the population is so much higher it would be a free for all, lol
[01:58:32] <hazzy-lab> most places you can't camp at all
[01:58:52] <jesseg> I should actually go camping at noname lake. I have a sister past Medford in Oregon, I could sneak in a camping trip on the way to see her
[01:59:07] <jesseg> wow that's too bad
[01:59:33] <hazzy-lab> perfect!
[02:00:24] <hazzy-lab> it is a shame, because it makes the places where we can camp over crowded which is no fun
[02:00:28] <jesseg> maybe it's because I come from a rural area.. or maybe because I over think things.. but I will admit to being disturbed by the restrictions on camping on undeveloped public lands.. I mean sure, if you let everyone camp where they want, they are going to wear the grass out in a few spots..
[02:00:57] <jesseg> But it's like all the animals.. They wear out some areas of their habitat too.. but there are millions of areas they don't wear out.
[02:00:59] -!- Erikcnc has joined #hazzy
[02:00:59] -!- Erikcnc has quit [Client Quit]
[02:01:30] <jesseg> There's seriously not enough people who want to actually get out of their house on the weekend to go camping and actually ruin a significant surface of the earth..
[02:01:44] <jesseg> Have some faith in the way nature works I say :P
[02:01:49] <hazzy-lab> haha
[02:01:53] <hazzy-lab> its true
[02:01:54] <jesseg> but I might be biased :P
[02:02:13] <hazzy-lab> there would have to be a LOT of people camping to do significant damage
[02:03:10] <jesseg> yeah, I mean they might wear the grass out within 100 feet of the drive-able access. But that's all. There's so much beyond that which is too much work to get to, and 99.99999% of people will never go out there.
[02:03:32] <jesseg> and the ones that do will be so few and far between it won't be the end of the world :P
[02:05:41] <hazzy-lab> right
[02:06:18] <hazzy-lab> well, I guess I better get some sleep, its past 2am, again
[02:06:27] <jesseg> alright well good night and it was great visiting
[02:06:34] <hazzy-lab> good chatting with you!
[02:06:36] <hazzy-lab> night
[02:06:40] <jesseg> night!
[03:16:54] -!- hazzy-dev has quit [Remote host closed the connection]
[03:17:13] -!- hazzy-dev has joined #hazzy
[08:44:17] -!- tommylight has joined #hazzy
[08:44:58] <tommylight> hmmmm ...... WAKE UP !!!
[08:45:04] <tommylight> :)
[09:41:36] <jesseg> ok ok I'm trying to
[10:08:39] -!- Roguish has joined #hazzy
[10:21:15] -!- tyugaev has joined #hazzy
[10:21:29] -!- tyugaev has quit [Client Quit]
[10:26:34] -!- jackkk[m] has quit [Ping timeout: 240 seconds]
[10:26:35] -!- RSSBot[turbosssp has quit [Ping timeout: 240 seconds]
[10:29:03] -!- jackkk[m] has joined #hazzy
[10:29:04] -!- RSSBot[turbosssp has joined #hazzy
[10:38:14] <hazzy-dev> trying tommy, I really am!
[10:43:03] <tommylight> Sorry Kurt, am at work just wanted to check how you are doing.
[10:43:29] <tommylight> will check in from time to time, leaving this on
[10:58:20] <hazzy-lab> haha, good!
[11:12:24] -!- tommylight has quit [Ping timeout: 252 seconds]
[11:42:08] <TurBoss> good morning
[11:44:44] <Lcvette[m]> morning
[11:46:43] <Lcvette[m]> back to work for me today
[11:46:44] <Lcvette[m]> vacation is over
[11:46:51] <Lcvette[m]> :(
[11:46:59] <TurBoss> good and bad
[11:46:59] <TurBoss> :D
[11:48:22] <Lcvette[m]> are you back to work or on vacation still turboss?
[11:48:49] <hazzy-lab> TurBoss, Lcvette, morning
[11:49:15] <Lcvette[m]> morning
[11:51:35] <TurBoss> vacation until 20
[11:51:41] <Lcvette[m]> nice!
[11:55:15] <Lcvette[m]> is it safe to merge now?
[11:55:21] <Lcvette[m]> i saw you pushed
[11:57:07] <TurBoss> no
[11:57:07] <TurBoss> :D
[11:57:11] <Lcvette[m]> :(
[11:57:20] <TurBoss> just testing
[11:57:31] <Lcvette[m]> ok
[11:57:39] <TurBoss> you can just double click on my branch
[11:58:06] <Lcvette[m]> i didnt know you cou could do that
[11:58:50] <Lcvette[m]> it says a local ppclone already exists
[11:59:29] <TurBoss> hmmm
[12:00:16] <TurBoss> if you have all the commits in your branch pushed
[12:00:24] <TurBoss> is safe to reset here
[12:00:47] <Lcvette[m]> turboss_ppclone
[12:03:01] <TurBoss> worked?
[12:03:16] <Lcvette[m]> yes, now i can switch between them
[12:03:24] <Lcvette[m]> i didn't know you could do that
[12:07:03] <TurBoss> but remember
[12:07:19] <TurBoss> you mush have you local changes commited or stashed
[12:07:20] <TurBoss> hazzy is fan of stashes
[12:07:40] <Lcvette[m]> ok, i am all committed on my end
[12:10:13] <TurBoss> ok
[12:10:16] <TurBoss> my branch is much as experimental
[12:10:23] <hazzy-lab> I love stashes! I have hundreds of them, lol
[12:10:36] <TurBoss> don't take it seriously
[12:10:58] <Lcvette[m]> lol
[12:10:59] <Lcvette[m]> i always take you seriously!
[12:11:00] <Lcvette[m]> you are turboss code fu teacher!
[12:11:35] <Lcvette[m]> i don't know what that means
[12:11:49] <Lcvette[m]> hazzy, can you fix my probe button?
[12:11:57] <Lcvette[m]> i brike it
[12:11:58] <Lcvette[m]> broke
[12:12:04] <Lcvette[m]> boss and pockets tab
[12:12:11] <Lcvette[m]> upper left corner
[12:12:15] <hazzy-lab> sure!
[12:12:16] <hazzy-lab> sek
[12:12:21] <Lcvette[m]> boss round
[12:19:10] <TurBoss> hazzy-lab: i did somthing but designer refuses to load it
[12:19:16] <TurBoss> could you take a look?
[12:19:22] <hazzy-lab> yes!
[12:19:22] <TurBoss> TypeError: invalid result from DynATC.createWidget(), DynATC cannot be converted to PyQt5.QtWidgets.QWidget in this context
[12:19:35] <hazzy-lab> Lcvette[m]: Are you getting this error? "Could not parse application stylesheet"
[12:19:43] <TurBoss> it ihnerits from QQuickWidget
[12:20:04] <hazzy-lab> TurBoss: Ah, I hate that error
[12:20:15] <hazzy-lab> I have got it many times before
[12:20:21] <TurBoss> oh
[12:20:41] <TurBoss> my widget doen's inherit from Qwidget
[12:20:57] <TurBoss> instead it inherist from QQuickWidget
[12:21:53] <hazzy-lab> that makes sense to inherit QQuickWidget
[12:22:11] <Lcvette[m]> hazzy never seen it, where would i get it?
[12:22:18] <TurBoss> yes?
[12:22:22] <TurBoss> ok I'll wait
[12:22:26] <TurBoss> Lcvette: firts
[12:22:47] <TurBoss> is a quote lol
[12:22:58] <hazzy-lab> Lcvette[m]: sorry, I am not running on all cylenders today, I was in TurBoss's branch, thought was yours, lol
[12:23:23] <Lcvette[m]> hahahaha
[12:23:40] <Lcvette[m]> turboss's branch is dangerous
[12:23:46] <hazzy-lab> xD
[12:23:49] <TurBoss> ahahahahah
[12:23:53] <TurBoss> its radioactive
[12:23:57] <Lcvette[m]> scares me
[12:23:57] <TurBoss> is my ppclone thig
[12:24:00] <TurBoss> *thing
[12:24:05] <Lcvette[m]> must be black belt in code fu to enter
[12:24:12] <TurBoss> lol
[12:24:18] <hazzy-lab> haha
[12:24:33] <Lcvette[m]> i went in for only a moment and almost didn't make it out
[12:24:38] <TurBoss> time to time
[12:24:53] <TurBoss> :)
[12:35:58] <TurBoss> lol 7 hazzys on tha room
[12:36:24] <TurBoss> only 2 me
[12:43:39] <hazzy-lab> lol
[12:43:47] <hazzy-lab> TurBoss: Ok, fixed :)
[12:43:50] <hazzy-lab> Ill push
[12:43:59] <TurBoss> yes?
[12:43:59] <TurBoss> works?
[12:44:01] <TurBoss> or somthing?
[12:44:14] <hazzy-lab> yes, now it shows up in designer
[12:44:35] <TurBoss> great!!! hurra!!!
[12:46:04] <hazzy-lab> pushed
[12:46:55] <hazzy-lab> maybe this should be in a DynATC branch, lol
[12:47:07] <hazzy-lab> I pushed to PPClone origin xD
[12:47:11] <TurBoss> you are a genious!
[12:47:21] <hazzy-lab> lol
[12:47:23] <hazzy-lab> nah
[12:47:27] <TurBoss> a crazy one
[12:47:41] <hazzy-lab> I agree with the crazy part
[12:47:50] <hazzy-lab> :D
[12:48:03] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch ppclone at Hazzy / QtPyVCP ( https://gitlab.com )
[12:49:05] <hazzy-lab> I think the path the the QML file might be wrong ....
[12:49:14] <TurBoss> yes it is
[12:49:24] <hazzy-lab> but at least the widget loads :P
[12:49:24] <TurBoss> i'm on it
[12:51:07] <TurBoss> ok works!!!!
[12:51:29] <hazzy-lab> Hurray!!!
[12:51:47] <hazzy-lab> So we can use both QML and Qtwidgets!
[12:51:55] <hazzy-lab> best of both worlds
[12:53:02] <TurBoss> yes!
[12:56:08] <hazzy-lab> altendky is awesome!
[12:58:16] <TurBoss> yes
[13:27:00] <TurBoss> okay
[13:27:07] <TurBoss> fixed
[13:27:09] <TurBoss> pushed to my fork
[13:27:11] * hazzy-lab checks it out
[13:27:13] <TurBoss> ppclone
[13:27:27] <TurBoss> Great!!!
[13:27:59] <hazzy-lab> QML Connections: Cannot assign to non-existent property "onRotateResult"
[13:28:17] <TurBoss> hmmmm
[13:28:18] <TurBoss> sek
[13:29:20] <hazzy-lab> it works fine when launching, just not in designer
[13:29:25] <hazzy-lab> Nice work!
[13:30:06] <hazzy-lab> hey, the labels don't rotate!! Hurray!
[13:30:14] <TurBoss> yes!
[13:30:23] <TurBoss> its a trick
[13:30:34] <TurBoss> + rot for image - rot for its childs
[13:31:07] * hazzy-m uploaded an image: Screenshot_2018-08-06_13-30-46.png (62KB) < https://matrix.org >
[13:31:14] <hazzy-lab> well, some don't rotate
[13:31:16] <hazzy-lab> xD
[13:31:27] <hazzy-lab> this is awesome
[13:31:50] <TurBoss> lol
[13:32:04] <TurBoss> fixing
[13:33:10] <TurBoss> pushed
[13:33:15] <hazzy-lab> thanks
[13:34:55] <TurBoss> fire QtCreator and open the qml file
[13:37:23] * TurBoss uploaded a video: Peek 06-08-2018 19-35.webm (702KB) < https://matrix.org >
[13:38:01] <TurBoss> bye
[13:38:18] <TurBoss> Lcvette: be carefull there be drangon
[13:38:19] <TurBoss> s
[13:38:25] <hazzy-lab> cu TurBoss!
[13:38:32] <hazzy-lab> thanks for making that work!
[13:41:01] <Lcvette[m]> i had a customer.. what did i miss
[13:41:06] <Lcvette[m]> looks like alot
[13:41:45] <Lcvette[m]> i love dragons!
[13:41:59] <Lcvette[m]> dragons are my favorite
[13:42:04] <Lcvette[m]> we should put dragons in the gui
[13:42:22] <hazzy-lab> haha
[13:42:45] <hazzy-lab> There will be dragons, in the shape of bugs
[13:42:45] <Lcvette[m]> lol
[13:42:53] <hazzy-lab> lol
[13:43:15] <Lcvette[m]> hahahaha
[13:43:22] <Lcvette[m]> so the wheel turnsd in the gui?
[13:44:45] <hazzy-lab> yes!
[13:45:58] <Lcvette[m]> hoq do i make it turn?
[13:46:01] <hazzy-lab> push the do thing button
[13:46:18] <hazzy-lab> Do It*
[13:46:20] <hazzy-lab> lol
[13:46:59] * Lcvette[m] uploaded an image: image.png (282KB) < https://matrix.org >
[13:47:24] <Lcvette[m]> no do it
[13:47:30] <Lcvette[m]> :(
[13:47:34] <TurBoss> lol
[13:47:44] <TurBoss> errors?
[13:47:48] <hazzy-lab> Ah, your in the wrong branch
[13:47:53] <hazzy-lab> I think ...
[13:48:34] * Lcvette[m] sent a long message: < https://matrix.org >
[13:48:52] <hazzy-lab> oh
[13:49:59] <TurBoss> python-pyqt5.quick or similar
[13:50:29] <Lcvette[m]> have to check it later
[13:50:50] <Lcvette[m]> gott aget these order finished before mail puickup
[13:50:51] * hazzy-m uploaded an image: Screenshot_2018-08-06_13-50-29.png (59KB) < https://matrix.org >
[13:50:51] <Lcvette[m]> then play time
[13:51:06] <hazzy-m> LOLOL, I broke the package manager somehow
[13:51:22] <TurBoss> lol
[13:52:35] <hazzy-m> yes, sudo apt install python-pyqt5.qtquick
[14:25:50] <Lcvette[m]> orders shipped!
[14:25:51] <Lcvette[m]> 2:30 cut off time met!
[14:25:51] <Lcvette[m]> whoo hoo
[14:25:52] * Lcvette[m] sent a long message: < https://matrix.org >
[14:25:53] <Lcvette[m]> hurray!
[14:26:39] <Lcvette[m]> says i already have that program installed
[14:26:59] <Lcvette[m]> ?
[14:37:50] <TurBoss> hmmm
[14:38:35] <TurBoss> sudo apt install python-pyqt5.qtquick2 ????
[14:40:30] <Lcvette[m]> i need two of them?
[14:43:27] <TurBoss> the version 2
[14:44:07] <Lcvette[m]> ah i need version 2?
[14:44:19] <TurBoss> type sudo apt install python-pyqt5.qtquick<tab twice>
[14:45:00] <Lcvette[m]> chris@debian:~$ sudo apt install python-pyqt5.qtquick
[14:45:01] <Lcvette[m]> python-pyqt5.qtquick python-pyqt5.qtquick-dbg
[14:45:02] <Lcvette[m]> chris@debian:~$ sudo apt install python-pyqt5.qtquick
[14:45:25] <TurBoss> hmmmmmmmmmmmmmmmmm
[14:46:02] <TurBoss> ill check when arraive home
[14:47:14] <Lcvette[m]> ok
[15:59:36] <TurBoss> Lcvette: could you try this "sudo apt install libqt5quickcontrols2-5"
[16:00:18] <Lcvette[m]> ok
[16:00:52] <Lcvette[m]> cnc
[16:01:04] <TurBoss> ??
[16:01:23] <Lcvette[m]> sorry was typing in wrong keyboard
[16:01:24] <Lcvette[m]> lol
[16:01:30] <TurBoss> :D
[16:01:31] <Lcvette[m]> ok it installed it
[16:01:59] <Lcvette[m]> now try it again?
[16:02:05] <TurBoss> yes please
[16:02:27] <Lcvette[m]> openign the kraken
[16:02:43] <TurBoss> switch branches
[16:02:53] <Lcvette[m]> ?
[16:02:57] <TurBoss> lattest turbranch
[16:03:05] <TurBoss> I'm 2rboss
[16:03:05] <Lcvette[m]> yes
[16:03:10] <Lcvette[m]> i was checking out your branch
[16:03:20] <TurBoss> great
[16:03:42] <Lcvette[m]> 2rboss?
[16:04:05] * Lcvette[m] uploaded an image: image.png (226KB) < https://matrix.org >
[16:04:15] <TurBoss> yes
[16:04:19] <Lcvette[m]> i was just going to checkout the one at the top
[16:04:26] <Lcvette[m]> says fix missing rectangles
[16:04:35] <Lcvette[m]> ?
[16:04:36] <Lcvette[m]> that one correct?
[16:05:07] <TurBoss> yes
[16:07:10] <TurBoss> errors?
[16:07:59] * Lcvette[m] uploaded an image: image.png (195KB) < https://matrix.org >
[16:08:30] <TurBoss> hmm
[16:08:49] <Lcvette[m]> missing qrc:atc.qml
[16:09:04] <TurBoss> hmmm
[16:10:10] <TurBoss> something...
[16:10:25] <TurBoss> does the designer work?
[16:10:50] <TurBoss> should no
[16:10:51] <TurBoss> :D
[16:11:05] <Lcvette[m]> it opens
[16:11:09] <Lcvette[m]> wait which one?
[16:11:15] <Lcvette[m]> smiley face one or the other one?
[16:11:35] <TurBoss> the sad face
[16:11:39] <TurBoss> lol
[16:11:39] <Lcvette[m]> smiley face one opens
[16:11:47] <TurBoss> and the other refuses?
[16:12:37] <Lcvette[m]> no other one opened too
[16:13:13] <TurBoss> did you pull?
[16:13:17] <TurBoss> sek I have a duel
[16:14:06] <Lcvette[m]> yes
[16:17:42] <TurBoss> lost
[16:19:02] * TurBoss uploaded an image: VectorImage_2018-08-06_101800.jpg (1109KB) < https://matrix.org >
[16:19:13] <Lcvette[m]> why you lost?
[16:19:15] <Lcvette[m]> get in there and kickj ass
[16:19:18] <Lcvette[m]> put the fu on them!
[16:19:45] <TurBoss> :D
[16:20:26] <Lcvette[m]> swords?
[16:20:26] <TurBoss> so could you open the sad QtDesigner?
[16:20:32] <Lcvette[m]> guns?
[16:20:46] <Lcvette[m]> yes, both opened
[16:20:47] <TurBoss> is the fornite
[16:21:05] <TurBoss> a friend told me to play one
[16:21:10] <Lcvette[m]> image one and none image one
[16:21:24] <TurBoss> can you open the resource manager=?
[16:23:24] * Lcvette[m] uploaded an image: image.png (363KB) < https://matrix.org >
[16:23:50] <TurBoss> ok the resource manager is there
[16:23:56] <TurBoss> in bottom right
[16:24:14] * Lcvette[m] uploaded an image: image.png (33KB) < https://matrix.org >
[16:24:27] <TurBoss> could you click on -
[16:24:45] <TurBoss> remove the atc.qml and the
[16:24:47] <TurBoss> and the /
[16:25:33] * Lcvette[m] uploaded an image: image.png (33KB) < https://matrix.org >
[16:25:36] <TurBoss> ok
[16:25:39] <TurBoss> done
[16:25:53] <TurBoss> then launc the ppthing
[16:26:03] <Lcvette[m]> save?
[16:26:11] <TurBoss> yes
[16:26:48] * Lcvette[m] uploaded an image: image.png (282KB) < https://matrix.org >
[16:27:00] <TurBoss> errors?
[16:28:34] * Lcvette[m] uploaded an image: image.png (296KB) < https://matrix.org >
[16:29:00] <Lcvette[m]> lots of things not ninstalled
[16:29:01] <TurBoss> well something
[16:29:10] <TurBoss> google-fuing
[16:29:23] <Lcvette[m]> lol
[16:33:03] <TurBoss> qtdeclarative5-qtquick2-plugin
[16:34:03] <Lcvette[m]> sudo apt install qtdeclarative5-qtquick2-plugin
[16:34:03] <Lcvette[m]> ?
[16:34:13] <TurBoss> yep
[16:35:08] * Lcvette[m] uploaded an image: image.png (58KB) < https://matrix.org >
[16:36:26] <Lcvette[m]> 1
[16:37:09] <TurBoss> hmmmm
[16:41:46] <TurBoss> sorry I'm on windows trying to figure why debian doesn't work
[16:42:41] <Lcvette[m]> lol
[16:42:56] <Lcvette[m]> traitor
[16:43:26] <Lcvette[m]> hahaha
[16:44:02] <TurBoss> sudo apt install qml-module-qtquick-layouts
[16:44:18] * Lcvette[m] uploaded an image: image.png (106KB) < https://matrix.org >
[16:44:28] <Lcvette[m]> hurray?
[16:44:28] <TurBoss> ok
[16:44:40] <TurBoss> one less error
[16:44:42] <Lcvette[m]> hurray!
[16:44:46] <TurBoss> could you paste the output?
[16:45:08] <TurBoss> sudo apt install qml-module-qtquick-controls
[16:46:19] * Lcvette[m] uploaded an image: image.png (246KB) < https://matrix.org >
[16:46:19] * Lcvette[m] uploaded an image: image.png (246KB) < https://matrix.org >
[16:46:54] <TurBoss> ok now they are less
[16:46:57] <TurBoss> sudo apt install qml-module-qtquick-controls
[16:47:05] <TurBoss> did you installed this one?
[16:47:25] * Lcvette[m] uploaded an image: image.png (209KB) < https://matrix.org >
[16:47:31] <TurBoss> ok
[16:47:36] * Lcvette[m] uploaded an image: image.png (341KB) < https://matrix.org >
[16:47:40] <Lcvette[m]> hurray!!!!!!!
[16:47:41] <Lcvette[m]> it moves!!!!
[16:47:44] <Lcvette[m]> you did it!!!!!
[16:48:06] <TurBoss> fantastic!
[16:48:15] <TurBoss> I took note on whats needed
[16:49:15] <Lcvette[m]> file:// QML Connections: Cannot assign to non-existent property "onRotateResult"
[16:49:16] <Lcvette[m]> file:// ReferenceError: atc is not defined
[16:49:29] <TurBoss> yes I was looking at
[16:49:34] <Lcvette[m]> ok
[16:50:59] <TurBoss> dpi is diferent than mine
[16:51:13] <TurBoss> font looks diferent
[16:51:15] <Lcvette[m]> dpi?
[16:51:24] <TurBoss> screen point density
[16:51:32] <Lcvette[m]> you have wrong font
[16:51:38] <Lcvette[m]> always have
[16:51:41] <Lcvette[m]> nopt sure why
[16:51:43] <TurBoss> ahhh true
[16:51:53] <Lcvette[m]> proabbly need to fix that on your end
[16:52:06] <TurBoss> where is the font
[16:52:18] <TurBoss> now I can't i'm at my labtop
[16:52:23] <TurBoss> away from home
[16:52:35] <Lcvette[m]> im not sure why its different, it should get pulled yes?
[16:53:03] <TurBoss> Lcvette: do you sell bmw things
[16:53:07] <Lcvette[m]> yes
[16:53:20] <TurBoss> a friend of mine has a 1 series
[16:53:29] <TurBoss> 1800
[16:53:44] <Lcvette[m]> nice
[16:53:58] <Lcvette[m]> i mainly make parts for late model 135/335
[16:54:03] <Lcvette[m]> turbo models
[16:54:07] <TurBoss> ah ok
[16:54:38] <TurBoss> my mother's old one was a 325
[16:54:40] <TurBoss> :P
[16:54:57] <TurBoss> my favourite series
[16:55:02] <TurBoss> 3 series coupe
[16:55:02] <TurBoss> from 90'a
[16:55:57] <TurBoss> here is known as the Gypsy's bmw
[16:56:12] <Lcvette[m]> lol nice
[16:56:18] <Lcvette[m]> why gypsy's?
[16:56:48] <TurBoss> becouse every one has one
[16:56:58] <TurBoss> the 90's model
[16:57:21] <TurBoss> mine is a toyota land cruiser
[16:57:24] <TurBoss> 3000/125
[16:57:36] <TurBoss> ok away to smoke a bit
[16:57:43] <Lcvette[m]> nice! those are sweet
[16:57:45] <Lcvette[m]> hahaha
[16:57:51] <Lcvette[m]> whatcha smoke?
[16:58:06] <TurBoss> some tobako
[16:58:16] <TurBoss> here we can't becouse of the baby
[16:58:19] <Lcvette[m]> ah
[16:58:24] <TurBoss> we have to go outside
[16:58:24] <Lcvette[m]> need to switch to vape
[16:58:31] <TurBoss> boo
[16:58:36] <Lcvette[m]> lol
[16:58:39] <TurBoss> vap sux (haven't tried)
[16:58:40] <TurBoss> lol
[16:59:37] <TurBoss> I'm sure you ride an M5
[16:59:37] <TurBoss> lol
[16:59:54] <Lcvette[m]> nah
[16:59:54] <TurBoss> here on town there is a 850
[16:59:54] <Lcvette[m]> 335
[16:59:57] <Lcvette[m]> too rich for me
[17:00:06] <TurBoss> you rich
[17:00:26] <Lcvette[m]> not me
[17:00:26] <TurBoss> lol
[17:00:27] <TurBoss> :P
[17:00:35] <Lcvette[m]> yes
[17:00:35] <TurBoss> do you know 850
[17:00:37] <Lcvette[m]> very nice
[17:00:37] <TurBoss> its amazing
[17:00:53] <TurBoss> ok
[17:00:54] <TurBoss> away
[17:00:56] <Lcvette[m]> go smoke
[17:00:56] <TurBoss> me
[17:03:18] <Lcvette[m]> 0
[17:13:29] -!- tommylight has joined #hazzy
[17:35:03] * Lcvette[m] uploaded an image: ridges_and_valleys_probe_group.PNG (1193KB) < https://matrix.org >
[17:35:51] * Lcvette[m] uploaded an image: ridge_and_valley_group.PNG (932KB) < https://matrix.org >
[17:37:40] <hazzy-lab> very nice!\
[17:38:52] <Lcvette[m]> working on the rest of the probing graphics
[17:42:06] <tommylight> that second picture looks like a small house ! can i live there please ?
[17:42:17] <hazzy-lab> lol
[17:45:46] <tommylight> sorry guys i am off to dreamland, had a bussy day
[17:45:51] <tommylight> good night all
[17:45:59] <hazzy-lab> sweet dreams tommy!
[17:46:17] <Lcvette[m]> no squaters tommy
[17:46:24] <Lcvette[m]> lol
[17:46:27] <Lcvette[m]> night
[17:46:51] <hazzy-lab> lol
[17:50:36] -!- tommylight has quit [Ping timeout: 252 seconds]
[18:06:16] <TurBoss> sup hazzy? what you working ob?
[18:06:20] <TurBoss> on
[18:06:37] <hazzy-lab> not falling asleep
[18:06:38] <hazzy-lab> lol
[18:07:32] <hazzy-lab> not done much programming today, been working on a fish pond
[18:07:38] <TurBoss> great
[18:16:25] <Lcvette[m]> pushed new ridge and valley probe page update
[19:39:26] * Lcvette[m] uploaded an image: ridge_and_valley_group.PNG (670KB) < https://matrix.org >
[19:41:29] * Lcvette[m] uploaded an image: ridges_and_valleys_probe_group.PNG (333KB) < https://matrix.org >
[20:03:15] <Lcvette[m]> slow night
[20:03:51] <Lcvette[m]> grabcad
[20:14:53] <TurBoss> hello
[20:15:15] <hazzy-lab> howdy TurBoss!
[20:15:32] <Lcvette[m]> hola
[20:15:33] <TurBoss> finally at home
[20:15:37] <TurBoss> Hola!
[20:15:49] <hazzy-lab> Lcvette[m]: What about GrabCAD?
[20:15:52] <Lcvette[m]> nice!
[20:16:10] <Lcvette[m]> was typing in google
[20:16:10] <hazzy-lab> lol
[20:16:16] <hazzy-lab> xD
[20:16:21] <hazzy-lab> I should have known
[20:16:27] <Lcvette[m]> wanted to see if there were some dimensions on an electronic tool setter
[20:16:44] <Lcvette[m]> i don't have one here to base a model on
[20:16:44] <hazzy-lab> nice
[20:17:32] * Lcvette[m] uploaded an image: Tool Probe.PNG (88KB) < https://matrix.org >
[20:17:41] <hazzy-lab> hmm, what type are you thinking of, like the renishaw?
[20:17:43] <Lcvette[m]> found this sweet model
[20:17:44] <TurBoss> I'm goin to pick the DynATC thing and move it away from ppclone branch
[20:17:45] -HaikuBot[m]:#hazzy- I'm goin to pick
[20:17:46] -HaikuBot[m]:#hazzy- the DynATC thing and move it
[20:17:47] -HaikuBot[m]:#hazzy- away from ppclone branch
[20:17:50] <hazzy-lab> Oh, NICE!
[20:18:01] <TurBoss> HURRAY!
[20:18:02] <TurBoss> hauko
[20:18:04] <hazzy-lab> TurBoss: Good idea!
[20:18:09] <Lcvette[m]> i asked the creator if i could use the model in the gui
[20:18:16] <Lcvette[m]> hurray
[20:18:21] <Lcvette[m]> waiting to hear back\
[20:18:30] <TurBoss> liccense?
[20:18:44] <Lcvette[m]> he is just a hobbiest
[20:18:47] <hazzy-lab> Lcvette[m]: glad to see you are one of the few that asks first :)
[20:19:44] <Lcvette[m]> yeah for sure, i wouldn't use an unlicensed graphic
[20:19:51] <Lcvette[m]> not without permission
[20:20:55] <Lcvette[m]> just hard to model one without having it here to pull measurements off of
[20:21:30] <Lcvette[m]> ok, im gonna go spend a couple hours with the wife
[20:21:31] <hazzy-lab> That is my model, that somebody took and made a real crappy tutorial with: https://www.youtube.com
[20:21:33] <hazzy-lab> :(
[20:21:33] <Lcvette[m]> back in 2 hours
[20:21:50] <Lcvette[m]> those bastards!
[20:21:50] <hazzy-lab> Lcvette[m]: Have fun!
[20:22:00] <Lcvette[m]> hahaha
[20:22:02] <Lcvette[m]> will do!
[20:22:04] <TurBoss> I'm droping my ppclone branch
[20:22:05] <Lcvette[m]> bbl
[20:22:15] <Lcvette[m]> what?
[20:22:19] <Lcvette[m]> why dropping?
[20:22:29] <TurBoss> moved to DynATC branch
[20:22:34] <TurBoss> don't worry
[20:22:44] <Lcvette[m]> ok
[20:22:59] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch DynAtc at Hazzy / QtPyVCP ( https://gitlab.com )
[20:23:21] <TurBoss> work continues on DynATC
[20:27:57] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch DynAtc at Hazzy / QtPyVCP ( https://gitlab.com )
[20:30:54] <hazzy-lab> Hurray! Thank you TurBoss
[20:31:13] <TurBoss> I'm goin to make
[20:31:17] <TurBoss> onclick on each tool
[20:31:25] <TurBoss> sets it on the holder
[20:31:28] <TurBoss> virtual
[20:31:30] <TurBoss> just for test
[20:31:38] <hazzy-lab> sweet!
[20:57:58] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch DynAtc at Hazzy / QtPyVCP ( https://gitlab.com )
[21:02:58] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch DynAtc at Hazzy / QtPyVCP ( https://gitlab.com )
[21:02:59] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch DynAtc at Hazzy / QtPyVCP ( https://gitlab.com )
[21:03:27] -!- hazzy-lab has quit [Ping timeout: 240 seconds]
[21:08:58] <Lcvette[m]> louis this was the order i cancel,
[21:09:30] -!- hazzy-lab has joined #hazzy
[21:09:30] -!- mode/#hazzy [+o hazzy-lab] by ChanServ
[21:14:44] <Lcvette[m]> let me know if i need to cancel the newest one as well
[21:14:45] <Lcvette[m]> this was a bit confusing
[21:15:31] <hazzy-lab> Lcvette[m]: Wrong keyboard ...
[21:15:32] <TurBoss> wrong char
[21:15:34] <TurBoss> chat
[21:15:35] <hazzy-lab> xD
[21:15:39] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]
[21:16:08] <TurBoss> hazzy-lab: I pretty broke everything
[21:16:10] <TurBoss> :(
[21:16:23] <hazzy-lab> uh oh
[21:16:34] <hazzy-lab> want me to look?
[21:17:17] <TurBoss> nah
[21:17:20] <TurBoss> thanks
[21:17:27] <TurBoss> just reporting
[21:17:27] <TurBoss> :D
[21:17:39] <hazzy-lab> ok :D
[21:22:04] <Lcvette[m]> hahahahahaha
[21:22:05] <TurBoss> ok got it working
[21:22:05] <Lcvette[m]> i had the screen turned off
[21:22:13] <hazzy-lab> Hurray!!
[21:22:16] <Lcvette[m]> hurray!
[21:22:17] <hazzy-lab> LC, LOL
[21:22:20] <TurBoss> no
[21:22:34] <TurBoss> I broke and fixed again lol
[21:22:41] <hazzy-lab> haha
[21:22:48] <Lcvette[m]> turboss you did it!! you made it happen!
[21:22:48] <TurBoss> but I get some warnings
[21:22:54] <Lcvette[m]> hurray!!
[21:24:00] <TurBoss> hazzy-lab: would yo like to see what the warnings?
[21:24:06] <TurBoss> pushed
[21:24:15] <TurBoss> on the DynATC branch
[21:24:21] <TurBoss> using mini.ini
[21:24:41] <TurBoss> https://evileg.com
[21:24:45] <TurBoss> this is my reference
[21:24:58] <TurBoss> I'm goin to make me a sigi
[21:27:56] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch DynAtc at Hazzy / QtPyVCP ( https://gitlab.com )
[21:36:51] <TurBoss> back
[21:50:42] <Lcvette[m]> So what is with the switch?
[21:51:06] <TurBoss> ?
[21:51:09] <Lcvette[m]> Dynatc
[21:51:15] <TurBoss> yes still the same
[21:51:25] <Lcvette[m]> Ppclone
[21:51:45] <TurBoss> I'll work on DynAtc and use the mini.ini
[21:51:45] <TurBoss> for now
[21:51:50] <Lcvette[m]> What is it?
[21:51:57] <TurBoss> just a miniwindow
[21:52:04] <Lcvette[m]> Ah
[21:52:15] <TurBoss> ppclone doesn't fit my on screen
[21:52:31] <Lcvette[m]> Then merge it in the big one
[21:52:43] <Lcvette[m]> When your screens come?
[21:52:46] <TurBoss> tomorrow?
[21:52:56] <Lcvette[m]> Nice!
[21:53:00] <TurBoss> it should be here on 3
[21:53:01] <Lcvette[m]> Widescreen?
[21:53:01] <TurBoss> and still 6/7
[21:53:09] <TurBoss> yes
[21:53:14] <Lcvette[m]> Nice
[21:53:29] <Lcvette[m]> Will fit them?
[21:53:43] <TurBoss> sure
[21:53:44] <TurBoss> :D
[21:53:47] <Lcvette[m]> Lol
[21:54:08] <Lcvette[m]> So all this and tomorrow you'll have screens big enough to fit
[21:54:10] <Lcvette[m]> Hahahaha
[21:54:55] <Lcvette[m]> Your a trooper
[21:55:12] <TurBoss> I hope so
[21:55:42] <TurBoss> I just notice that ppclone is too similar to pp
[21:55:43] <TurBoss> :D
[21:56:28] <TurBoss> but no problem
[21:56:33] <Lcvette[m]> Too similar?
[21:56:55] <Lcvette[m]> That's why it's a clone
[21:57:09] <Lcvette[m]> That was the propose
[21:57:15] <Lcvette[m]> Purpose*
[21:57:19] <Lcvette[m]> Lol
[21:57:53] <Lcvette[m]> But to have it on newest release
[21:58:01] <Lcvette[m]> And not tormach only
[21:58:18] <Lcvette[m]> With better probing
[21:58:24] <Lcvette[m]> And widescreen
[21:58:44] <TurBoss> :)
[21:58:51] <Lcvette[m]> Did you not know that?
[21:59:01] <TurBoss> no
[21:59:03] <Lcvette[m]> Oh
[21:59:09] <TurBoss> xD
[21:59:17] <Lcvette[m]> Yes Hazzy and I discussed it at length
[21:59:44] <Lcvette[m]> Decided that it was a good layout proven already
[22:00:29] <Lcvette[m]> Thought you knew all of this
[22:00:58] * TurBoss uploaded an image: image.png (102KB) < https://matrix.org >
[22:00:58] <TurBoss> me
[22:01:06] <Lcvette[m]> That's why it's working name is PPclone
[22:01:20] <Lcvette[m]> Blinders
[22:01:21] <Lcvette[m]> Lol
[22:02:03] <Lcvette[m]> Pathpilotclone
[22:02:37] <Lcvette[m]> Clone=copy
[22:02:54] <Lcvette[m]> Lol
[22:03:16] <Lcvette[m]> But will be completely open source
[22:03:29] <TurBoss> Great
[22:03:33] <TurBoss> look
[22:03:37] <TurBoss> lool
[22:04:39] * TurBoss uploaded a video: Peek 07-08-2018 04-04.webm (547KB) < https://matrix.org >
[22:04:39] <Lcvette[m]> \o/\o/\o/
[22:04:58] <TurBoss> hahahhahahah
[22:05:06] <Lcvette[m]> High speed
[22:05:07] <TurBoss> rusian roulete
[22:05:17] <Lcvette[m]> Lol
[22:05:18] <TurBoss> you don't know what tool
[22:05:21] <TurBoss> lol
[22:05:37] <Lcvette[m]> Hahahaha
[22:05:48] <Lcvette[m]> Place your bets
[22:05:48] <TurBoss> replaces G1 wit G0
[22:06:09] <Lcvette[m]> Lol
[22:06:10] <Lcvette[m]> High speed cutting
[22:14:38] <Lcvette[m]> Can you tell it how much to rotate the wheel per clock input?
[22:14:43] <Lcvette[m]> Click
[22:14:56] <TurBoss> 360/12
[22:15:28] <Lcvette[m]> Ah
[22:15:32] <Lcvette[m]> On move it was really small
[22:15:50] * TurBoss uploaded a video: Peek 07-08-2018 04-15.webm (302KB) < https://matrix.org >
[22:16:18] <TurBoss> now I have to store some data here and there
[22:16:21] <TurBoss> and make the tools not rotate
[22:16:32] <Lcvette[m]> Must have had an olde nice!!r
[22:16:37] <Lcvette[m]> That's awesomeness!!!
[22:16:45] <TurBoss> ty 😍
[22:16:53] <Lcvette[m]> XD
[22:16:59] <Lcvette[m]> xD
[22:18:25] <TurBoss> wowowowoowowo
[22:18:27] <TurBoss> look
[22:18:40] <Lcvette[m]> Yeah
[22:19:05] * TurBoss uploaded a video: Peek 07-08-2018 04-18.webm (297KB) < https://matrix.org >
[22:19:09] <TurBoss> muahahahhahah
[22:19:24] <TurBoss> it bounces
[22:19:37] <Lcvette[m]> Nice
[22:19:50] <TurBoss> will lower
[22:20:44] <Lcvette[m]> Can do all kinds of neat things huh!
[22:31:57] <hazzy-lab> TurBoss: I was away
[22:32:05] <hazzy-lab> just tried the ATC
[22:32:07] <hazzy-lab> Hurray!
[22:32:13] <Lcvette[m]> He's doing cool things
[22:32:19] <TurBoss> did you saw the last vid?
[22:32:21] <TurBoss> lol
[22:32:26] <TurBoss> new one
[22:32:27] <hazzy-lab> he sure is, as usual :)
[22:32:35] <hazzy-lab> no checking
[22:32:58] <hazzy-lab> Nice!!
[22:33:18] * TurBoss uploaded a video: Peek 07-08-2018 04-32.webm (973KB) < https://matrix.org >
[22:33:27] <hazzy-lab> I think you need to tune the PID on the carosel server xD
[22:33:32] <hazzy-lab> servo
[22:33:32] <TurBoss> just tools left to keep upside
[22:33:36] <TurBoss> jajajajajja
[22:33:42] <TurBoss> hahahahahah*
[22:33:47] <TurBoss> lol
[22:34:02] <hazzy-lab> that looks awesome!
[22:34:26] <TurBoss> I'm in love with tha QML thing
[22:34:35] <hazzy-lab> good
[22:34:39] <hazzy-lab> I need to learn it
[22:34:59] <hazzy-lab> I can learn by reading the TurBoCode
[22:35:03] <hazzy-lab> :)
[22:35:45] <TurBoss> lol no
[22:39:23] <Lcvette[m]> Since would be cool on lathe turret with kick back locking mechanism
[22:39:32] <Lcvette[m]> ATC carousel don't bounce :(
[22:39:32] <hazzy-lab> it would be!
[22:39:43] <hazzy-lab> well, they are not supposed to
[22:39:44] <hazzy-lab> lol
[22:40:08] <Lcvette[m]> Geneva wheel is very positive
[22:40:16] <hazzy-lab> yes, that is true
[22:40:28] <hazzy-lab> but the new high speed ones are direct servo drive
[22:41:00] <hazzy-lab> so they move continuously with out having to index for each tool which it SLOW
[22:41:02] <hazzy-lab> haha
[22:41:07] <TurBoss> the Quaser atc i have at work scares me
[22:42:21] <Lcvette[m]> Yeah?
[22:42:26] <Lcvette[m]> Fat?
[22:42:30] <hazzy-lab> is it one of the flying arm types?
[22:42:32] <TurBoss> fast
[22:42:43] <TurBoss> is a "T"
[22:42:52] <TurBoss> sek I'll search for a vid
[22:43:19] <hazzy-lab> an upside down T?
[22:44:08] <TurBoss> https://www.youtube.com
[22:44:09] <TurBoss> yes
[22:44:15] <TurBoss> that but FASTER!!!
[22:44:54] <hazzy-lab> that is a complicated tool change!
[22:44:57] <hazzy-lab> that would be scary
[22:45:09] <hazzy-lab> My dream machine: https://youtu.be
[22:45:59] <TurBoss> lol
[22:46:03] <TurBoss> pim pam
[22:50:23] <TurBoss> pushing
[22:52:14] <TurBoss> tired for now
[22:52:24] <TurBoss> kcj's turn :P
[22:52:56] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch DynAtc at Hazzy / QtPyVCP ( https://gitlab.com )
[22:59:25] <hazzy-lab> Thanks TurBoss!
[23:00:30] <TurBoss> how could be connected to a real ATC?
[23:00:42] <hazzy-lab> Not sure
[23:00:50] <hazzy-lab> that might get a little complicated
[23:01:13] <TurBoss> I don't have ATC
[23:01:15] <TurBoss> I have MTC
[23:01:17] <TurBoss> lol
[23:01:55] <hazzy-lab> neither do I, but Lcvette does, he'll have to finish the ATC widget
[23:01:57] <hazzy-lab> xD
[23:02:15] <hazzy-lab> Just testing it, very nice!
[23:02:28] * hazzy-lab goes to read the coode
[23:02:28] <TurBoss> 🙂
[23:02:49] <TurBoss> the python one is the largest part
[23:02:50] <TurBoss> lol
[23:03:11] <TurBoss> open the qml with qtcreator
[23:03:13] <hazzy-lab> ok
[23:03:27] <TurBoss> hazzy-lab: does the font fit the circle?
[23:03:31] <hazzy-lab> no
[23:03:47] <TurBoss> doesn't show fine?
[23:03:55] <TurBoss> like my vids?
[23:04:16] * hazzy-m uploaded an image: Screenshot_2018-08-06_23-03-44.png (58KB) < https://matrix.org >
[23:04:32] <TurBoss> 😠
[23:04:39] <TurBoss> you broke
[23:04:47] <TurBoss> nah you already told me about this
[23:04:51] <TurBoss> 😓
[23:08:52] <TurBoss> so much C&P
[23:12:39] <TurBoss> http://solvespace.com
[23:12:42] <Lcvette[m]> Nice!!
[23:12:59] <TurBoss> worth download
[23:14:05] <Lcvette[m]> TurBoss
[23:14:06] <TurBoss> yo
[23:14:09] <Lcvette[m]> Awesome work!!
[23:14:14] <TurBoss> lol
[23:14:15] <TurBoss> ty
[23:14:45] <Lcvette[m]> I have ideas on ways to connect but not how to actually do it
[23:15:01] <TurBoss> is a there hal pins for the atc?
[23:15:14] <TurBoss> we can read them
[23:15:51] <Lcvette[m]> The ATC uses remap M6 codes
[23:15:52] <Lcvette[m]> And subroutines
[23:16:00] <TurBoss> do you have that?
[23:16:08] <Lcvette[m]> Yes
[23:16:08] <TurBoss> let me see
[23:16:12] <TurBoss> :P
[23:16:31] <Lcvette[m]> Ok see, have to go to my big machine and boot it up
[23:16:35] <TurBoss> ssh?
[23:16:40] <TurBoss> has network?
[23:16:54] <Lcvette[m]> Wireless
[23:16:54] <TurBoss> don't worry
[23:16:57] <TurBoss> tomorrow
[23:17:04] <Lcvette[m]> No biggie
[23:17:16] <Lcvette[m]> It's 30 steps away
[23:17:17] <TurBoss> ufff
[23:17:20] <TurBoss> so long
[23:17:24] <TurBoss> :)
[23:18:13] <Lcvette[m]> Booting now
[23:18:42] <hazzy-lab> TurBoss: Do you use SolveSpace?
[23:18:52] <TurBoss> no just played
[23:19:03] <hazzy-lab> Oh, it is awesome!!!
[23:19:03] <TurBoss> just 6MB
[23:19:03] <TurBoss> lol
[23:19:15] <hazzy-lab> I use it for almost everything I 3D print
[23:19:19] <TurBoss> imports dx
[23:19:20] <TurBoss> f
[23:19:24] <TurBoss> yes!?
[23:19:29] <hazzy-lab> Not sure
[23:19:44] <TurBoss> yes it imports dxf
[23:19:46] <TurBoss> i know
[23:19:54] <hazzy-lab> very nice!
[23:20:03] <hazzy-lab> It is very quick and easy to use
[23:20:15] <hazzy-lab> better than solidworks for simple parts
[23:21:01] <TurBoss> hazzy-lab: have you checked the code?
[23:21:07] <TurBoss> is ugly eh?
[23:21:09] <TurBoss> :P
[23:21:25] <TurBoss> the dynatc thing
[23:22:11] <TurBoss> I use FreeCad for my personal things
[23:22:24] <hazzy-lab> No i have not, it is my dads birthday so he has been around, he just left though, so I can work again!
[23:22:44] <TurBoss> oh
[23:22:55] <TurBoss> Great Great
[23:23:01] <TurBoss> happy birthday!!
[23:23:05] <TurBoss> to him
[23:23:30] <hazzy-lab> I'll tell him!
[23:23:34] <hazzy-lab> we had a great day
[23:23:42] <TurBoss> 🙂
[23:23:54] <hazzy-lab> he liked your ATC think :D
[23:23:58] <hazzy-lab> thing*
[23:24:03] <TurBoss> :)
[23:24:09] <Lcvette[m]> what archive format type?
[23:24:19] <Lcvette[m]> tar?
[23:24:24] <TurBoss> zip?
[23:24:25] <TurBoss> tar
[23:24:27] <TurBoss> doesn't matter
[23:24:56] <TurBoss> the atc bounces like the work Fadal
[23:24:56] <TurBoss> lol
[23:25:23] <TurBoss> I told that wrote post for both? 😎
[23:25:44] <TurBoss> Heidenhain and stupid Fada
[23:25:45] <TurBoss> l
[23:25:49] <hazzy-lab> haha
[23:26:28] <hazzy-lab> You don't like the Fadal? They are built like tanks, but not very refined, lol
[23:26:41] <TurBoss> control is prehistoric
[23:26:49] <hazzy-lab> oh
[23:26:49] <TurBoss> serial is slow as hell
[23:26:50] <hazzy-lab> lol
[23:26:55] <hazzy-lab> put LCNC on it :P
[23:27:02] <TurBoss> but they don't let me retrofit
[23:27:06] <TurBoss> :)
[23:27:11] <hazzy-lab> you should use paper tape instead
[23:27:12] <hazzy-lab> xD
[23:27:26] <TurBoss> hahahahah
[23:27:45] <TurBoss> yes is a very stron machine
[23:27:50] <TurBoss> and has a penguin
[23:27:56] * Lcvette[m] posted a file: XK7130_INCH.tar (950KB) < https://matrix.org >
[23:28:12] <hazzy-lab> My friends machine uses paper tape, he hacked it so he could feed it from a PC
[23:28:12] <Lcvette[m]> that is my current machine configuration file
[23:28:12] <TurBoss> checking
[23:28:13] <Lcvette[m]> all of it
[23:28:22] <TurBoss> lol
[23:28:30] <Lcvette[m]> the tool change macros are in the macros folder
[23:28:41] <Lcvette[m]> there are several
[23:28:45] <TurBoss> hazzy-lab: take note of Lcvette file
[23:28:56] <TurBoss> https://www.youtube.com
[23:28:57] <Lcvette[m]> hazzy you may want to download it too
[23:29:07] * hazzy-lab is already looking at it :D
[23:29:07] <TurBoss> music
[23:29:54] <Lcvette[m]> ok logging off this machine going back inside to download it on my machine there
[23:29:56] <Lcvette[m]> been meangin to transfer a copy there anyhow
[23:29:58] <Lcvette[m]> :)
[23:30:12] <hazzy-lab> there are a bunch of really nice probe icons
[23:30:15] <hazzy-lab> lol
[23:30:40] <TurBoss> lol ncam ones
[23:31:05] <hazzy-lab> yes, probe screen xD
[23:32:36] * TurBoss is thinking about how to make this configurable....
[23:36:58] <TurBoss> grep -R carousel .
[23:37:18] <TurBoss> http://linuxcnc.org
[23:37:22] <TurBoss> not this?
[23:37:23] <TurBoss> just asking
[23:40:49] * Lcvette[m] sent a long message: < https://matrix.org >
[23:41:19] <Lcvette[m]> from the toolchange.ngc macro subroutine\
[23:42:13] <Lcvette[m]> these are the numbered parameters that represent the pocket numbersof the carousel
[23:42:16] <Lcvette[m]> and the tool numbers aRE STORED IN THESE PARAMETER NUMBER LOCATIONS
[23:43:14] <TurBoss> ok
[23:43:44] <TurBoss> I have seen some pins
[23:43:48] <TurBoss> atc-index
[23:43:49] <TurBoss> and so
[23:44:24] <TurBoss> thoose are system Variables?
[23:44:27] <Lcvette[m]> the atc rules are in the toolchange.ngc file
[23:44:39] <Lcvette[m]> yes
[23:44:53] <Lcvette[m]> it uses the system variables
[23:45:00] <Lcvette[m]> as pocket numbers
[23:45:13] <TurBoss> ah ok
[23:45:23] <Lcvette[m]> P1-P12 or however many pockets
[23:45:38] <TurBoss> ok I'll try something
[23:45:47] <TurBoss> read thoose vars
[23:45:50] <TurBoss> lol
[23:46:10] <Lcvette[m]> so you need to follow both the pocket which will also contain the current tool number information
[23:47:24] <TurBoss> has hazzy-lab seen something?
[23:47:25] <TurBoss> :P
[23:47:40] * TurBoss is tired
[23:47:42] <Lcvette[m]> so i wasn't sure of maybe it wouold be easiest to use the same information the tc works off of
[23:47:43] * hazzy-lab is being lazy
[23:47:48] <Lcvette[m]> get some sleep
[23:47:49] <Lcvette[m]> lol
[23:47:56] <TurBoss> when I have my monitor
[23:48:00] <TurBoss> lol
[23:48:05] <hazzy-lab> TurBoss: You can't read vars from python in LCNC :(
[23:48:10] <Lcvette[m]> yes!!
[23:48:12] <hazzy-lab> we need to make that possible
[23:48:16] <Lcvette[m]> new monitors tomorrow!!
[23:48:16] <TurBoss> mew
[23:48:18] <Lcvette[m]> santa is coming!
[23:48:19] <hazzy-lab> it would be very usefulk
[23:48:21] <Lcvette[m]> hurray!!!
[23:48:26] <TurBoss> sure
[23:48:37] <hazzy-lab> I don't think it would be hard
[23:48:48] <TurBoss> where are they ? the vars
[23:48:56] <TurBoss> in ram?=
[23:49:13] <hazzy-lab> there is already a boos module for the interpretor that exposes the vars, just need to make it easy to import
[23:49:15] <Lcvette[m]> in the .var file
[23:49:15] <TurBoss> oh
[23:49:15] <Lcvette[m]> ?
[23:49:40] <hazzy-lab> in int in interpretor ... something
[23:49:42] <hazzy-lab> checking
[23:49:44] <TurBoss> ¿?
[23:50:12] <Lcvette[m]> hazzy, being there is already an active subroutine running, could we not add some code in there to print?
[23:51:13] <Lcvette[m]> or am i in left field?
[23:51:21] <Lcvette[m]> chasing butteflies
[23:51:21] <Lcvette[m]> lol
[23:51:24] <TurBoss> left is good
[23:51:40] <hazzy-lab> I think it is in src/rs274/interp_python.cc
[23:52:10] <hazzy-lab> Lcvette[m]: yes, that is the idea
[23:52:36] <hazzy-lab> to expose those vars in the remap to other python modules
[23:56:30] <Lcvette[m]> ok, i see in the ngc it assigns at the start and end of the toolchange.ngc sub
[23:57:24] <Lcvette[m]> so it would update the start and end tool/pocket entries