#hazzy | Logs for 2018-08-16

Back
[00:07:44] <hazzy-lab> ok, making the whole bar change is easy!
[00:07:56] <Lcvette[m]> Awesome!!!!
[00:09:08] <Lcvette[m]> Exciting!!!
[00:09:27] <hazzy-lab> very!
[00:09:30] <hazzy-lab> working on it now
[00:27:30] * hazzy-m uploaded an image: Peek 2018-08-16 00-27.gif (40KB) < https://matrix.org >
[00:27:49] <hazzy-lab> it turned into a challenge :D
[00:28:02] <hazzy-lab> now to make it look better
[00:30:53] <Lcvette[m]> Nice!!
[00:33:13] <Lcvette[m]> Not doing the whole bar change?
[00:33:19] <hazzy-lab> that is easy
[00:33:41] <hazzy-lab> I need more of a challenge :p
[00:33:42] <hazzy-lab> lol
[00:34:03] <hazzy-lab> No, I will make the whole bar change
[00:34:15] <hazzy-lab> just wanted to see if this was possible
[00:34:22] <Lcvette[m]> Lol
[00:34:41] <hazzy-lab> I think QtPyVCP should have one with the various colors, even if you don't need it
[00:35:58] <Lcvette[m]> Yeah for sure options are great
[00:36:21] <Lcvette[m]> I'm curious to see what the whole bar change would feel like
[00:36:44] <Lcvette[m]> I'm thinking it will be more of an eye catcher
[00:37:13] <hazzy-lab> Yes, it will be, it might be too much of an eye catcher!
[00:37:16] <Lcvette[m]> Since more of the exposed bar will turn
[00:37:23] <Lcvette[m]> That's true too
[00:37:38] <hazzy-lab> but an overload it not good, so ..
[00:38:44] <Lcvette[m]> Maybe make the color shift near optimal to just over subtle and more aggressive as it goes beyond
[00:38:49] <Lcvette[m]> Is there a limit?
[00:38:59] <Lcvette[m]> To color shifts?
[00:39:14] <hazzy-lab> well, depends on how we do it
[00:39:21] <hazzy-lab> three color shifts is easy
[00:39:42] <hazzy-lab> many more and we have to do it a different way
[00:39:55] <hazzy-lab> that is, with a custom paintEvent
[00:39:56] <Lcvette[m]> Ah
[00:43:53] * Lcvette[m] sent a long message: < https://matrix.org >
[00:44:10] <Lcvette[m]> >
[00:44:14] <Lcvette[m]> Lol
[00:44:15] <hazzy-lab> close
[00:45:46] <hazzy-lab> if value < 100:
[00:45:46] <hazzy-lab> setStyleSheet("background-color: yellow")
[00:45:47] <hazzy-lab> unpolish()
[00:45:47] <hazzy-lab> repolish()
[00:45:47] <hazzy-lab> ...
[00:46:10] <hazzy-lab> not sure how much time setting the style sheet takes though
[00:46:19] <Lcvette[m]> Ah
[00:46:30] <hazzy-lab> it should be pretty fast, but if now we'd have to do it another way
[00:46:36] <hazzy-lab> not*
[00:47:13] <Lcvette[m]> Never thought of that
[00:55:43] <Lcvette[m]> Probably best to make them the way you did
[00:56:30] <Lcvette[m]> I can build the gradient
[00:56:38] <Lcvette[m]> :-P
[00:59:19] -!- tommylight has joined #hazzy
[01:13:56] <Lcvette[m]> > <@freenode_hazzy-lab:matrix.org> it should be pretty fast, but if now we'd have to do it another way
[01:13:57] <Lcvette[m]> hazzy-lab: is there multicolored background done in stylesheet?
[01:13:57] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed new project branch LoadMeter at Hazzy / QtPyVCP ( https://gitlab.com )
[01:14:04] -!- hazzy-lab has quit [Ping timeout: 265 seconds]
[01:16:55] <Lcvette[m]> That answers that
[01:17:38] <Lcvette[m]> Lol
[01:18:09] <hazzy-m> Sorry, my PC crashed again :(
[01:18:21] <hazzy-m> At least the push went thru!
[01:18:31] <Lcvette[m]> Nice
[01:18:38] <hazzy-m> Not close to done, but a start
[01:18:40] <Lcvette[m]> To hat the past went through
[01:18:57] <hazzy-m> Calling it a day here
[01:19:03] <Lcvette[m]> You need to put that thing in the corner and get the Lenovo back out
[01:19:20] <hazzy-m> Lol, for real!
[01:19:44] <Lcvette[m]> Before it really catches ya of guard
[01:19:55] <Lcvette[m]> Hey where in NC were you?
[01:20:08] <hazzy-m> The trusty Lenovo is sitting hear ready to roll, should just switched the HDD back into it
[01:20:25] <hazzy-m> Yes, this morning
[01:20:38] <hazzy-m> Near highlands
[01:21:03] <hazzy-m> Hiking, lol
[01:21:21] <Lcvette[m]> Nice
[01:21:52] <hazzy-m> Yeah, had a great time with the fam
[01:22:59] <Lcvette[m]> long drive
[01:23:17] <hazzy-m> School starts next week so one last trip before then
[01:23:27] <Lcvette[m]> Awesome
[01:23:31] <Lcvette[m]> Uh oh
[01:23:44] <hazzy-m> Not too bad, about 2hr drive
[01:23:50] <Lcvette[m]> Then you'll be tied up with school work
[01:24:54] -!- hazzy-lab has joined #hazzy
[01:24:54] -!- mode/#hazzy [+o hazzy-lab] by ChanServ
[01:26:00] <hazzy-m> No, not me! I'm not crazy and working on a PhD, but my twin is :D
[01:27:50] <Lcvette[m]> Lol
[01:27:52] <hazzy-lab> I started working a a nuclear masters but quit at a minor xD
[01:28:07] <Lcvette[m]> Ah
[01:29:24] <Lcvette[m]> Get some sleep I'm gonna do the same
[01:29:27] <hazzy-lab> the department kind went away from under me which was disappointing, but it was going to be a pain get the classes I needed to continue so I just quit
[01:29:42] <hazzy-lab> yeah, I can't keep my eye open
[01:29:44] <hazzy-lab> night!
[01:30:05] <Lcvette[m]> Yeah, sounds like a pain
[01:31:33] <Lcvette[m]> Similar thing happened while I was in school, I had been working towards an engineering degree where I would transfer to NC state after I completed my undergrad at ECU
[01:32:13] <Lcvette[m]> And they changed the entire department in my second year
[01:32:25] <Lcvette[m]> As well as the curriculum
[01:33:04] <Lcvette[m]> I would have needed an additional 40 hours to complete what I had originally started in the original program
[01:33:34] <Lcvette[m]> Sucked
[03:37:23] -!- hazzy-lab1 has joined #hazzy
[03:37:24] -!- mode/#hazzy [+o hazzy-lab1] by ChanServ
[03:37:47] -!- hazzy-lab has quit [Ping timeout: 255 seconds]
[03:37:48] hazzy-lab1 is now known as hazzy-lab
[04:11:13] -!- HaikuBot[m] has quit [Remote host closed the connection]
[04:11:16] -!- jschi[m] has quit [Remote host closed the connection]
[04:11:17] -!- KurtJacobsonGitt has quit [Read error: Connection reset by peer]
[04:11:17] -!- JoseLuisGitter[m has quit [Read error: Connection reset by peer]
[04:11:25] -!- Lcvette[m] has quit [Remote host closed the connection]
[04:11:29] -!- RSSBot[turbosssp has quit [Remote host closed the connection]
[04:11:29] -!- GitterIntegratio has quit [Remote host closed the connection]
[04:11:29] -!- TurBoss has quit [Write error: Connection reset by peer]
[04:11:31] -!- hazzy-m has quit [Read error: Connection reset by peer]
[04:11:31] -!- jackkk[m] has quit [Read error: Connection reset by peer]
[04:21:16] -!- RSSBot[turbosssp has joined #hazzy
[04:46:52] -!- HaikuBot[m] has joined #hazzy
[04:46:52] -!- Lcvette[m] has joined #hazzy
[04:46:52] -!- hazzy-m has joined #hazzy
[04:46:52] -!- TurBoss has joined #hazzy
[04:46:52] -!- GitterIntegratio has joined #hazzy
[04:46:59] -!- JoseLuisGitter[m has joined #hazzy
[04:47:00] -!- KurtJacobsonGitt has joined #hazzy
[04:47:00] -!- jackkk[m] has joined #hazzy
[04:47:00] -!- hazzy[m] has joined #hazzy
[04:47:00] -!- jschi[m] has joined #hazzy
[07:49:00] -!- tommylight has quit [Ping timeout: 252 seconds]
[09:09:07] -!- tommylight has joined #hazzy
[09:13:03] * jschi[m] uploaded an image: Screen Shot 2018-08-16 at 9.10.02 AM.png (727KB) < https://matrix.org >
[09:13:35] <hazzy-lab> jschi[m] Nice!!
[09:13:56] <hazzy-lab> morning
[09:13:57] <jschi[m]> some late night progress - lots left to work out but have the mechanics of making a QtWidget down
[09:14:52] <hazzy-lab> excellent!
[09:14:56] <jschi[m]> morning! We'll need to decide if we need a state button widget - e.g. something to reflect 'selection'
[09:15:31] <jschi[m]> PP uses the led in the button to reflect selection, I'm open to whatever - but obviously one of the 'increments' is slected at a time
[09:16:32] <jschi[m]> will chunk through some more on this tonight - should be able to wire it up. Also factoring out jog_button as it's own .ui file so we can add them programatically
[09:17:28] <jschi[m]> also may want a vertical variant - using an hbox layout currently, could make that a user property to switch layouts
[09:41:02] <hazzy-lab> jschi[m]: Yes, we certainly need some way of indicating button state!
[09:41:02] <hazzy-lab> One way is simply to set the buttons as checkable, and change the background color to indicate the state, which is what I did in the brender example VCP
[09:41:16] * hazzy-m uploaded a video: brender.mp4 (384KB) < https://matrix.org >
[09:42:03] <jschi[m]> k, will review - more tonight/tomorrow
[09:42:16] <hazzy-lab> But I think LC would like to use an LED in ProbeBasic, and I think that would look better too
[09:42:25] <hazzy-lab> ok!
[09:47:11] <Lcvette[m]> whats i miss? morning!!
[09:49:46] <jschi[m]> ok, I'll start by getting the basics working - and show LCVette the .ui files for this widget - we can tweak from there
[09:49:49] <jschi[m]> morning!@
[09:51:20] <Lcvette[m]> jschi: do you buttons not change cvolors?
[09:52:32] <jschi[m]> they do change colors - I was observing that one of the 4 buttons should reflect selected state - e.g. only one button can be selected - PP uses the led on button to indicate selection
[09:52:55] <Lcvette[m]> yes!
[09:53:06] <Lcvette[m]> i would love to see what an led looked like on this
[09:53:11] <jschi[m]> I'm open to ideas - was thinking that an StateButton could do that
[09:53:48] <jschi[m]> yes, I'll mock it up - soon you'll be able to drag and drop the JogIncrement widget onto the screen and it will replace the labels/buttons you've mocked up!
[09:54:49] <Lcvette[m]> you mean like pick and choose what you want?
[09:55:35] <Lcvette[m]> precoded
[09:55:45] <hazzy-lab> jschi[m]: There is an autoExclusive property in QButtons that will automagicaly makes only one checkable at a time, basically turns them into radio buttons!
[09:55:45] <Lcvette[m]> pre-coded
[09:55:50] <jschi[m]> see the screenshot i put up this morning - the JogIncrement widget is now/will be a choosable widget and will be wired to the INCREMENTS from the .ini file and will adjust to the size you make it on the screen
[09:55:51] <Lcvette[m]> even a word?
[09:56:24] <Lcvette[m]> cool
[09:56:35] <jschi[m]> no, increments are defined in the ini as measurement and optional units
[09:57:13] <jschi[m]> so even if your machine units are mm you can say `INCREMENTS=0.5 in, 0.02mm, 0.05, 10
[09:57:55] <jschi[m]> I'll leave the units stuff until after I get the basics working but we'll need to think about what that looks like
[10:00:26] <jschi[m]> hazzy- nice on the autoExclusive - that will save a few lines of code
[10:01:06] <Lcvette[m]> sorry putting coffee on
[10:01:21] <Lcvette[m]> back and forth from comp[uter
[10:02:05] <jschi[m]> all good, will be radio silent for a while - more later
[10:02:15] <Lcvette[m]> mixed bag of increments sounds dangerous
[10:03:02] <Lcvette[m]> i would think it would be much safer to be able to change them all from metric to in at once
[10:03:28] <jschi[m]> yeah, the question is are we building a widget that supports what LCNC supports or designing a single opinionated UI which is what PP does?
[10:03:47] <Lcvette[m]> hitting an inch button instead of a mm button would cause some grief
[10:04:13] <Lcvette[m]> ive been there before
[10:04:24] <jschi[m]> If you look @ axis of gmoccapy they display units if present or default to the machine units
[10:04:29] <hazzy-lab> Lcvette[m]: if you think the are dangerous then you don't define them in the INI,
[10:04:43] <Lcvette[m]> no but there should be some safegaurds in place
[10:04:52] <jschi[m]> I'm not suggesting that I'd do it but it exists in LCNC so if we're building a toolkit for LCNC we should IMO just display what's in the `INCREMENTS` section of the ini file
[10:04:54] <Lcvette[m]> true
[10:05:18] <Lcvette[m]> good points
[10:06:19] <Lcvette[m]> trying to remember if increments work that way
[10:06:43] <Lcvette[m]> in mm rule that is
[10:07:25] -HaikuBot[m]:#hazzy- hazzy- nice on the
[10:07:25] -HaikuBot[m]:#hazzy- autoExclusive - that will save
[10:07:26] <Lcvette[m]> i think i tried this when i was attempting to convert from a mm to in config without disrupting to many other things in the config and im not sure if it worked withthe increments or not
[10:07:26] -HaikuBot[m]:#hazzy- a few lines of code
[10:07:43] <jschi[m]> Lcvette: from the manual
[10:07:44] <jschi[m]> • INCREMENTS = 1 mm, .5 in, . . . - Defines the increments available for incremental jogs. The INCREMENTS can be used to override the default. The values can be decimal numbers (e.g., 0.1000) or fractional numbers (e.g., 1/16), optionally followed by a unit (cm, mm, um, inch, in or mil). If a unit is not specified the machine unit is assumed. Metric and imperial distances may be mixed: INCREMENTS = 1 inch, 1 mil, 1 cm, 1 mm
[10:07:44] <jschi[m]> 1 um is a valid entry.
[10:08:04] <Lcvette[m]> perfect
[10:08:05] <Lcvette[m]> !
[10:08:47] <Lcvette[m]> those were very early days with lcnc
[10:08:48] <Lcvette[m]> lol
[10:08:49] <hazzy-lab> Lcvette[m]: I thin that Gmoccapy does not fully implement what using mixed units
[10:09:21] <Lcvette[m]> ah may be
[10:09:42] <Lcvette[m]> or i may have formatted it incorrectly, like i said we are talking like the first week i was in the configs of lcnc
[10:09:53] <Lcvette[m]> could have been as asimple as a missing space
[10:10:10] <Lcvette[m]> thats awesome !!
[10:10:31] <Lcvette[m]> and i get what you are saying totally now!
[10:11:07] <Lcvette[m]> forgive me, my brain is still foggy,...
[10:11:31] <hazzy-lab> haha, mine too
[10:11:43] * hazzy-lab goes to get more coffee
[10:12:15] <Lcvette[m]> lcvette patiently wait to hear the magical percolator
[10:13:02] <Lcvette[m]> hazzy, did you get a chance to review the table?
[10:13:07] <Lcvette[m]> is it all jacked up?
[10:13:07] <Lcvette[m]> lol
[10:13:19] <hazzy-lab> no, I did not see it
[10:13:20] <hazzy-lab> checking
[10:13:35] <Lcvette[m]> offsets page
[10:14:22] <Lcvette[m]> i need to build a stylesheet for it
[10:14:57] <Lcvette[m]> but its a bit more comlex then the other objects/widgets etc ive been doing for
[10:15:49] <hazzy-lab> man, that looks good!
[10:16:10] <hazzy-lab> which one are you thinking about using?
[10:16:31] <Lcvette[m]> lol
[10:16:32] <Lcvette[m]> you hate tables
[10:16:57] <Lcvette[m]> i didn't know how to change the headers etc
[10:16:59] <hazzy-lab> I do lol
[10:17:07] <hazzy-lab> but those both look good!
[10:17:10] <Lcvette[m]> its pretty basic
[10:18:56] <Lcvette[m]> can that type table be used?
[10:19:17] <Lcvette[m]> i just dove in with what i saw available
[10:20:49] <hazzy-lab> Yes
[10:22:12] <Lcvette[m]> cool!!
[10:22:37] <Lcvette[m]> do you want to use your tool table from hazzy still or do you want me to make one of these for the tool table?
[10:22:48] <Lcvette[m]> i know you said it would save some coding
[10:28:22] <Lcvette[m]> Jeff, was just scoping out your stuff that awesome man!!
[10:28:39] -!- Roguish has joined #hazzy
[10:28:43] <Lcvette[m]> coffee is flowing brain is warming up finally..lol looking great!
[10:29:20] <Lcvette[m]> totally get what you guys were saying now
[11:23:43] * Lcvette[m] uploaded an image: image.png (187KB) < https://matrix.org >
[11:24:31] <Lcvette[m]> rough idea of tool table if you don't want to use your?
[11:25:21] <hazzy-lab> Lcvette[m]: I'll use yours, I like it better!
[11:25:40] <Lcvette[m]> it needs some things i don't know how to do
[11:25:53] <Lcvette[m]> and i need some style sheet help on the tables
[11:26:00] <Lcvette[m]> :(
[11:26:07] <Lcvette[m]> my fu is not strong enough yet
[11:27:08] <Lcvette[m]> right now i don't know how to edit the table cell alignments without individually going into every box to do so
[11:27:33] <Lcvette[m]> i did it on the offsets table but i definitely wouldn't want to have to do it on the tool table
[11:27:39] <Lcvette[m]> lol
[11:28:02] <Lcvette[m]> and it needs a check box added in a column to the left
[11:28:23] <Lcvette[m]> also would like to be able to change column widths independently
[11:28:37] <Lcvette[m]> the last column im able to use the "stretch last column to fit option
[11:29:14] <Lcvette[m]> i'll push this, then i need to get some orders shipped out
[11:29:43] <hazzy-lab> ok
[11:29:56] <hazzy-lab> probably most of the table formating needs to be done in python
[11:30:10] <hazzy-lab> I am working on the status labels and OR sliders
[11:30:16] -!- Roguish_ has joined #hazzy
[11:30:22] <hazzy-lab> after that I will start on the tooltable
[11:30:25] <Lcvette[m]> ok
[11:30:43] <Lcvette[m]> its starting to fill up!!!
[11:30:56] <Lcvette[m]> pages are looking full and plumb
[11:31:11] <hazzy-lab> yes indeed!!
[11:31:27] <hazzy-lab> I am falling in love with it
[11:31:35] <Lcvette[m]> yeah?
[11:31:36] <hazzy-lab> now I need a bigger screen on the mill, lol
[11:31:59] <Lcvette[m]> we have the smaller versions too
[11:32:07] <hazzy-lab> yes
[11:32:24] <hazzy-lab> but my screen it probably too small for those even
[11:32:26] <hazzy-lab> maybe not
[11:32:44] <hazzy-lab> its 1024 x 768
[11:32:45] <Lcvette[m]> i figured knock one out first, the big one since it will have the most rap, then go back and fit the smaller stuff
[11:32:58] -!- Roguish has quit [Ping timeout: 260 seconds]
[11:33:04] <hazzy-lab> right, that makes sense
[11:33:22] <Lcvette[m]> we can condense
[11:33:31] <Lcvette[m]> we will not leave a screen behind!
[11:33:41] <Lcvette[m]> just may not have all the bells and whistles
[11:33:44] -!- Roguish has joined #hazzy
[11:33:57] <Lcvette[m]> or may have to have a few extra tabs
[11:34:29] <Lcvette[m]> nesting doll it so to speak
[11:35:16] <Lcvette[m]> or maybe make a tab pop up for some controls that aren't used as often
[11:35:28] <Lcvette[m]> like mach had?
[11:35:46] <Lcvette[m]> one way or another we will make it happen for everyone!
[11:36:57] -!- Roguish_ has quit [Ping timeout: 240 seconds]
[11:41:38] <Lcvette[m]> Hazzy, do we need to set Jeff up with a remote on Git Kraken?
[11:42:38] <Lcvette[m]> never mind, i just saw i needed to add his remote
[11:43:26] <Lcvette[m]> done!
[11:43:37] <Lcvette[m]> ok im out for a bit to ship out some orders!
[11:43:41] <Lcvette[m]> back afterwards!
[11:44:04] <Lcvette[m]> tool table updates pushed to probe_basic_1920
[13:24:27] * hazzy-m uploaded an image: Peek 2018-08-16 13-23.gif (96KB) < https://matrix.org >
[13:24:30] <hazzy-lab> Hurray!
[13:24:57] <hazzy-lab> got the sliders to both set the OR values, and also respond to ORs set externally
[13:28:14] <hazzy-lab> did you know you can run any of the QtPyVCPs in addition to any of the other LinuxCNC GUIs?
[13:28:25] <hazzy-lab> it is quite useful for testing things like this
[13:53:17] <Lcvette[m]> OR's?
[13:53:44] <hazzy-lab> OverRides
[13:54:37] <Lcvette[m]> oh duh
[13:54:43] <hazzy-lab> :D
[13:54:46] <Lcvette[m]> hurray!!
[13:55:03] <Lcvette[m]> 🐼
[13:55:25] <Lcvette[m]> codedu panda
[13:55:26] <Lcvette[m]> codefu
[13:55:28] <Lcvette[m]> lol
[14:39:13] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[15:02:28] <TurBoss> hello
[15:15:37] <TurBoss> Lcvette: tha tool table looks very good
[15:16:10] <TurBoss> hazzy: that override slider is amazingly fast
[15:26:43] <Lcvette[m]> hurray!!
[15:26:44] <Lcvette[m]> off to the Post office!!
[16:01:16] <Lcvette[m]> lcvette is ba and ready to work on the gui
[16:14:25] <Lcvette[m]> turboss!
[16:14:35] <Lcvette[m]> your here!
[16:14:35] <Lcvette[m]> Hazzy your here!
[16:14:49] <TurBoss> 😀
[16:15:19] <Lcvette[m]> 🐼
[16:15:28] <Lcvette[m]> lol
[16:15:36] <Lcvette[m]> did you getb your robot fixed
[16:16:59] <TurBoss> not yet
[16:17:02] <TurBoss> :D
[16:17:14] <TurBoss> I'm working on the GUI
[16:17:41] <hazzy-m> Hurray!
[16:17:42] <Lcvette[m]> saweeeeet!
[16:17:47] <hazzy-m> I'll be back in a bit
[16:17:48] <Lcvette[m]> whatcha working on?
[16:18:25] <Lcvette[m]> ok
[16:18:29] <TurBoss> get the UI responsible on the raspby
[16:18:32] <TurBoss> aka fast
[16:18:47] <hazzy-m> TurBoss: nice!
[16:18:47] <Lcvette[m]> ah
[16:18:52] <Lcvette[m]> which gui?
[16:18:55] <Lcvette[m]> robot gui?
[16:19:10] <Lcvette[m]> whats a rasby
[16:19:22] <Lcvette[m]> raspby
[16:19:23] <Lcvette[m]> ?
[16:21:42] <hazzy-m> Does the pi have hardware GL?
[16:25:06] <TurBoss> the solution is to cross-compile the qt5 thing
[16:25:20] <TurBoss> but not now
[16:25:21] <TurBoss> I have a duel
[16:25:36] <TurBoss> Lcvette: raspberry-pi
[16:26:01] <Lcvette[m]> go smash
[16:26:47] * TurBoss uploaded an image: image.png (1132KB) < https://matrix.org >
[16:28:07] <TurBoss> I'll build a yocto image
[16:28:09] <TurBoss> bye
[16:35:52] <Lcvette[m]> fancy
[16:51:39] <hazzy-lab> calling the override sliders done!!
[16:52:26] <Lcvette[m]> Hurray!!
[16:52:39] <hazzy-lab> Lcvette[m]: What do you think about just using a label for the override value display? any need for it to be a spin box?
[16:53:31] <Lcvette[m]> no
[16:53:41] <Lcvette[m]> i was just trying to get the overide buton to work
[16:53:43] <Lcvette[m]> lol
[16:53:50] <Lcvette[m]> label is fine
[16:53:52] <hazzy-lab> excellent!
[16:54:08] <hazzy-lab> I already have the override label done :)
[16:54:30] <Lcvette[m]> hahahaha
[16:54:35] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[16:54:52] <Lcvette[m]> does linuxcnc support "run from here"
[16:55:01] <hazzy-lab> yes
[16:56:06] <Lcvette[m]> I wanted to change the "coolant" buton to two seperate buttons, one for flood and one for mist
[16:56:19] <Lcvette[m]> for those who have both
[16:56:51] <Lcvette[m]> and it gives me a space for another button
[16:57:04] <Lcvette[m]> was thinking a run form here button would be a good one to have
[16:57:15] <hazzy-lab> that is a good idea
[16:57:28] <Lcvette[m]> ok i will mock it up real fast
[16:57:44] <Lcvette[m]> i also added a go to zero button and added an elapsed time box
[16:58:03] <hazzy-lab> hurray!
[16:58:19] <Lcvette[m]> i almost forgot about it
[16:58:26] <Lcvette[m]> that thing is very handy
[16:58:29] <hazzy-lab> I have been thinking about how to do program statistics too
[16:58:40] <Lcvette[m]> i use it alot when my wife asks how much longer i'll be
[16:58:41] <Lcvette[m]> lol
[16:58:54] <Lcvette[m]> statistics?
[16:58:59] <hazzy-lab> it should be easy to show time spent in tool change, rapid and feed moves
[16:59:12] <hazzy-lab> and average velocities etc
[16:59:31] <Lcvette[m]> oh sweet
[16:59:37] <Lcvette[m]> that would be cool data to collect
[16:59:44] <hazzy-lab> might help optimize programs
[16:59:48] <hazzy-lab> it would!
[17:00:09] <hazzy-lab> and Qt has good poltting tools, so it would look cool too :D
[17:00:29] <Lcvette[m]> camworks uses that, it has data entry for tool change times but you need to know them before hand to make the program estimates accurate
[17:00:45] <hazzy-lab> right
[17:01:15] <Lcvette[m]> you give it your rapids speed etc... and it spits out your time for each tool and everything
[17:01:23] <hazzy-lab> nice!
[17:01:49] <Lcvette[m]> gets kicked out in the setup file
[17:02:11] <hazzy-lab> a good time estimate would be nice to have in LCNC, I think we can make one that is very good by learning from previous parts
[17:08:09] * Lcvette[m] uploaded an image: image.png (191KB) < https://matrix.org >
[17:16:05] <Lcvette[m]> i'll push so you can take a look at it!
[17:17:34] <Lcvette[m]> pushed!
[17:17:51] <Lcvette[m]> hey when i push, do you get the cool notifications like i get when you push?
[17:19:06] -HaikuBot[m]:#hazzy- it should be easy
[17:19:07] -HaikuBot[m]:#hazzy- to show time spent in tool change,
[17:19:07] -HaikuBot[m]:#hazzy- rapid and feed moves
[17:21:19] <hazzy-lab> oh nice! I like the ET
[17:21:41] <hazzy-lab> No, your pushes don't notify us
[17:23:28] <Lcvette[m]> how come?
[17:25:50] <hazzy-lab> because you are pushing to your fork, rather than to the main repository on gitlab
[17:26:50] <Lcvette[m]> ah
[17:26:52] <Lcvette[m]> lone wolf
[17:42:54] * Lcvette[m] uploaded an image: image.png (244KB) < https://matrix.org >
[17:43:10] <Lcvette[m]> made the offsets table more like the tool table, looks better ?
[18:23:29] * Lcvette[m] uploaded an image: image.png (248KB) < https://matrix.org >
[18:25:52] <hazzy-lab> looks fantastic!
[18:27:01] <Lcvette[m]> Hurray!
[18:27:44] <Lcvette[m]> did you ever here from your buddy contract pilot?
[18:28:10] <Lcvette[m]> im not sure what to do with the settings or file pages
[18:28:20] <Lcvette[m]> or status page
[18:28:34] <Lcvette[m]> the rest are nearing completion i need more material man!!
[18:33:12] <hazzy-lab> no, I have not seen him
[18:33:25] <hazzy-lab> I need to find that PP HDD ..
[18:33:53] <hazzy-lab> with this new PC it will be real easy to boot it, but I have to find it first!
[18:33:54] <hazzy-lab> lol
[18:34:21] <Lcvette[m]> hazzy has too many hard drives
[18:34:23] <Lcvette[m]> lol
[18:35:07] <hazzy-lab> you don't know what you are talking about, lol
[18:35:14] <hazzy-lab> I probably have over 100
[18:35:41] <Lcvette[m]> hazzy has a hoarding problem
[18:35:52] <Lcvette[m]> lol
[18:35:55] <hazzy-lab> most of them I take apart and melt down what I can and recycle the rest
[18:36:04] <hazzy-lab> yes i do!
[18:36:20] <hazzy-lab> I need to become a member of hoarders anon
[18:36:21] <hazzy-lab> xD
[18:36:32] <Lcvette[m]> hahahahaha
[18:37:44] <hazzy-lab> and my heat sink collection makes my hard drive collection look like nothing ..
[18:37:55] <hazzy-lab> it is not good
[18:38:21] <Lcvette[m]> lol
[18:38:23] <Lcvette[m]> you like heat sinks?
[18:38:25] <Lcvette[m]> whats the addiction to them?
[18:38:51] <hazzy-lab> no I hate them, but can't get rid of them fast enough!
[18:39:16] <Lcvette[m]> scrap metal
[18:39:17] <Lcvette[m]> ?
[18:39:18] <hazzy-lab> a friend and I run a PC recycling business
[18:39:27] <Lcvette[m]> ah
[18:49:00] <Lcvette[m]> pushing my update
[18:50:06] -!- tommylight has quit [Ping timeout: 252 seconds]
[18:50:12] <Lcvette[m]> pushed
[18:53:26] <hazzy-lab> thanks
[19:01:17] <Lcvette[m]> I know I built it so im somewhat biased, but i am pretty happy with the feel and look of the gui so far, it has exceeded what i thought i would be able to do
[19:01:50] <Lcvette[m]> by built i mean color selection and layout
[19:01:55] <Lcvette[m]> etc
[19:02:15] <Lcvette[m]> lol
[19:02:27] <Lcvette[m]> or lack of color selection
[19:02:27] <Lcvette[m]> lol
[19:03:03] <hazzy-lab> I am extremely happy with it!
[19:03:20] <Lcvette[m]> we should call it "the great grey bastard"
[19:03:24] <hazzy-lab> you have done a great job making it look clean but still easy to read
[19:03:27] <Lcvette[m]> lol
[19:03:29] <hazzy-lab> lol
[19:04:22] <Lcvette[m]> wife comes home tonight
[19:04:27] <Lcvette[m]> progress will slow
[19:04:28] <Lcvette[m]> :(
[19:05:12] <hazzy-lab> hahaha
[19:05:25] <hazzy-lab> it'll give me some time to catch up
[19:05:28] <hazzy-lab> :D
[19:05:47] <Lcvette[m]> you don't need time you have reinforcements now
[19:05:50] <Lcvette[m]> im outnumbered
[19:06:06] <Lcvette[m]> ya'll are going to catch up to me is what will happen
[19:06:10] <Lcvette[m]> you'll get on a roll
[19:06:29] <hazzy-lab> I hope so!
[19:06:34] <Lcvette[m]> and all of a sudden you'll be telling at me for more material to connect in the backend
[19:07:41] <Lcvette[m]> hey can you put the load meter in the probe basic so i can find a home for it?
[19:08:00] <Lcvette[m]> im not sure how to do that
[19:08:02] <hazzy-lab> sure!
[19:08:06] <hazzy-lab> (it's not done ...)
[19:08:11] <hazzy-lab> but you can play with it
[19:08:20] <Lcvette[m]> or tell me how
[19:08:21] <hazzy-lab> I will also add the new sliders !!!!!
[19:09:03] <hazzy-lab> all you have to do is merge the LoadMeter branch into the probe_basic branch
[19:09:03] <Lcvette[m]> whats left in it?
[19:09:07] <Lcvette[m]> colors?
[19:09:25] <hazzy-lab> how to hook it up to hal
[19:09:32] <Lcvette[m]> ah
[19:09:56] <Lcvette[m]> i need to branch before merge?
[19:10:14] <hazzy-lab> no, you can just merge into your branch
[19:10:22] <hazzy-lab> it should work
[19:10:29] -HaikuBot[m]:#hazzy- you have done a great
[19:10:30] -HaikuBot[m]:#hazzy- job making it look clean but
[19:10:31] -HaikuBot[m]:#hazzy- still easy to read
[19:11:11] * Lcvette[m] uploaded an image: image.png (287KB) < https://matrix.org >
[19:11:38] <hazzy-lab> looks good
[19:11:44] <Lcvette[m]> now?
[19:11:51] <Lcvette[m]> pull?
[19:11:51] <hazzy-lab> now you should have it
[19:12:00] <hazzy-lab> no, you don't need to
[19:12:04] <hazzy-lab> you already have it
[19:12:07] <Lcvette[m]> ok
[19:12:29] <hazzy-lab> you'll have to use the sad QtDesigner :(
[19:12:32] <hazzy-lab> lol
[19:12:47] <Lcvette[m]> ah man
[19:13:12] <Lcvette[m]> one day your gonna have to make me a launcher for it so i can put a sad dmiley icon on it
[19:14:40] -!- hazzy-lab has quit [Read error: Connection reset by peer]
[19:15:53] -!- hazzy-lab has joined #hazzy
[19:15:53] -!- mode/#hazzy [+o hazzy-lab] by ChanServ
[19:29:41] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[19:29:41] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[19:29:42] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[19:30:20] <Lcvette[m]> holy push monster
[19:39:01] * Lcvette[m] uploaded an image: image.png (1KB) < https://matrix.org >
[19:39:04] <Lcvette[m]> you like that gradient?
[19:39:19] <Lcvette[m]> i can try and break it into three color sets
[19:52:06] <jschi[m]> evening
[19:52:58] <jschi[m]> I got the increments button adding programatically - fighting with hbox layout to space buttons in box as someone adjusts it.
[19:53:24] <jschi[m]> definitely tight with any units appended to measurements
[19:53:42] <Lcvette[m]> use wrap
[19:53:49] <Lcvette[m]> weas thinking about earlier
[19:53:59] <Lcvette[m]> that should alleviate any spacing issues?
[19:54:02] <jschi[m]> My main goal is to get a layout that fits probe_basic_1920
[19:54:41] <jschi[m]> I was thinking a bit differently about it - like some iconic representation of units or superscript, smaller text - e.g. factor unit display out of the main text
[19:54:47] <jschi[m]> but that may just be getting fancy
[19:55:35] <jschi[m]> definitely want to create a derivative of ActionButton with selection displayed as an LED
[19:55:38] <Lcvette[m]> I know what you are going for, but I don't want to ruin the look of the interface to have mixed units
[19:55:55] <Lcvette[m]> especially when i doubt anyone would ever use it
[19:56:31] <Lcvette[m]> and i don't want to shrink the text size
[19:56:42] <jschi[m]> yeah, like I said as long as the display for `INCREMENTS` as you've mocked up looks like you've mocked up I'm good - as a toolkit someone could grab the increments and make it bigger - we agree
[19:56:59] <jschi[m]> so that's my goal for tonight
[19:57:00] <Lcvette[m]> yeah
[19:57:38] <jschi[m]> I'm picking up the Qt stuff as I go - been a long time since I did anything with Qt
[19:58:43] <Lcvette[m]> nice!
[20:01:30] <Lcvette[m]> now i'll tell you what i would like
[20:02:19] <Lcvette[m]> maybe a pop up tab window that had the remaining increment buttons not on the screen that could be in metric or whatever you want to program them in
[20:02:38] <Lcvette[m]> that way a conscious effort needs to be made to enter that box
[20:02:49] <jschi[m]> like [...] that pops up?
[20:02:55] <jschi[m]> yeah that could work
[20:03:08] <Lcvette[m]> since we only have space for the 4 on the screen
[20:03:18] <Lcvette[m]> we are wasting i think 2
[20:03:58] <Lcvette[m]> although im not sure if thats a gmoccapy limit of lcnc limit
[20:04:00] <jschi[m]> I'm not even sure there's a limit - gmoccapy I read last night supports 10, but only displays 6
[20:04:46] <jschi[m]> right, k, I'll save the gold plating for after I get the basics working
[20:09:05] <Lcvette[m]> yeah, i can't remember the number but it was from gmoccapy i was remembering
[20:10:22] <Lcvette[m]> i want to say from memory they had one space needed for something you culdn't change and the remaining could be used for the increments you wanted
[20:11:06] <Lcvette[m]> but if lcnc has no limit maybe a pop out tab with a hot key would be nice for metric if they were needed
[20:11:11] <Lcvette[m]> that make much more sense to me
[20:11:24] <Lcvette[m]> anmd sounds alot safer
[20:13:22] <Lcvette[m]> hmm that makes me think i should probably have a metric button to change the dro's to read in metric
[20:17:38] <jschi[m]> yeah, increments[0] is zero for continuous jog
[20:20:19] <Lcvette[m]> wow i just had a wild idea
[20:20:29] <TurBoss> hey I'm back
[20:20:49] <TurBoss> what you guys working on?
[20:21:13] <Lcvette[m]> gui
[20:21:53] <TurBoss> more specific?
[20:21:54] <TurBoss> :P
[20:22:30] <Lcvette[m]> Jeff is working on the increments buttons and i am working on the load meter placement
[20:22:44] <TurBoss> great!
[20:22:59] <Lcvette[m]> what are you working on?
[20:23:04] <TurBoss> what can turboss work on?
[20:23:14] <TurBoss> need any help?
[20:23:14] <Lcvette[m]> always
[20:23:23] <TurBoss> 🤗
[20:23:28] <Lcvette[m]> lol
[20:23:38] * hazzy-lab is back
[20:23:43] <Lcvette[m]> what do you like working on?
[20:23:55] <TurBoss> duno
[20:24:06] <hazzy-lab> TurBoss: Tooltable?
[20:24:08] <TurBoss> hazzy any task for me?
[20:24:15] <TurBoss> ok
[20:24:27] <Lcvette[m]> no breaky!
[20:24:44] <hazzy-lab> we can probably copy most of the tooltable code from hazzy
[20:24:54] <TurBoss> was your faul
[20:24:54] <Lcvette[m]> :/
[20:24:55] <TurBoss> :P
[20:25:00] <TurBoss> fault
[20:25:07] <TurBoss> gtk one=
[20:25:08] <TurBoss> ok
[20:25:53] <hazzy-lab> https://github.com
[20:26:27] <Lcvette[m]> hey someone make me an led bulb
[20:26:27] <Lcvette[m]> so i can try it out!
[20:26:38] <hazzy-lab> Lcvette[m]: the DROs change to metric in metric mode, I think this is probably good enough
[20:26:41] <Lcvette[m]> cause i will have alot of work on the buttons probably if that works out
[20:26:47] <TurBoss> allready exist
[20:26:58] <Lcvette[m]> sounds good to me!
[20:27:01] <hazzy-lab> yes, it is in the HAL section
[20:27:29] <hazzy-lab> You'll have to use the sad creator though
[20:27:30] <hazzy-lab> lol
[20:27:34] <TurBoss> ok /me heads to tooltable thing
[20:27:42] <hazzy-lab> thank you TurBoss!
[20:27:43] <Lcvette[m]> thats fine for buttons
[20:27:49] <Lcvette[m]> just not for images
[20:28:10] <hazzy-lab> right
[20:31:17] <Lcvette[m]> thnaks turboss!!
[20:31:36] <Lcvette[m]> wife just left last leg of her flight from charlotts, will have to pick her up in about 40 minutes
[20:31:55] <Lcvette[m]> then i'll be out until around 11:30 or so
[20:31:58] <TurBoss> oki
[20:32:17] <TurBoss> hazzy where to place toothing ?
[20:39:35] <TurBoss> input for now
[20:40:33] <hazzy-lab> yes, input it fine
[20:40:38] <hazzy-lab> is*
[20:43:13] <TurBoss> ok
[20:44:13] <hazzy-lab> Lcvette[m]: I just replaced the sliders withe the override sliders
[20:44:22] <hazzy-lab> can you check if it is OK?
[20:45:31] * Lcvette[m] uploaded an image: image.png (225KB) < https://matrix.org >
[20:45:48] <Lcvette[m]> ok, where can i play with the load meter coloring?
[20:45:55] <Lcvette[m]> and corners and stuff?
[20:46:16] <Lcvette[m]> will style sheet work for corner radius?
[20:48:43] <hazzy-lab> no, style sheet will not work on the load meter, since it uses a custom paint event :(
[20:49:06] <Lcvette[m]> how do i get into the code?
[20:49:14] <Lcvette[m]> im going into the matric
[20:49:18] <Lcvette[m]> matrix
[20:50:06] <Lcvette[m]> cause those colors just mach3'd this gui up
[20:50:22] <hazzy-lab> the load meter is in /widgets/display_widgets/load_meter.py
[20:50:30] <hazzy-lab> yes, lol
[20:50:39] <hazzy-lab> the colors are easy to change
[20:50:54] <Lcvette[m]> i figured they would be
[20:51:06] <Lcvette[m]> can you add me some corner radiuses
[20:51:31] <hazzy-lab> https://gitlab.com
[20:51:41] <hazzy-lab> just change the values of the QColors
[20:51:43] <Lcvette[m]> im going to the kraken now to get your sliders
[20:51:50] <hazzy-lab> thanks!
[20:52:32] <hazzy-lab> I'll see about corner radii, I don't have any experience using custom painter events :(
[20:52:40] <Lcvette[m]> where are the sliders?
[20:53:41] <Lcvette[m]> hazzy-lab: yo
[20:54:01] <Lcvette[m]> i don't see how to get the sliders
[20:54:02] <hazzy-lab> I told you, lol
[20:54:14] <hazzy-lab> matrix is slow?
[20:54:22] <hazzy-lab> hmm
[20:54:59] <hazzy-lab> they are in the hazzy/QtPyVCP master branch
[20:55:15] <Lcvette[m]> uh oh
[20:55:29] <hazzy-lab> no, not master lo
[20:55:32] <hazzy-lab> sorry
[20:55:47] <hazzy-lab> hazzy/QtPyVCP probe_basic_1920 branch
[20:56:13] <hazzy-lab> You should see it on your remotes
[20:56:48] <hazzy-lab> commit message is "probe_basic: replace QSliders with override sliders"
[20:56:52] <hazzy-lab> do you not see it?
[20:57:41] <Lcvette[m]> nope
[20:57:41] <hazzy-m> hmm
[20:57:44] * Lcvette[m] uploaded an image: image.png (228KB) < https://matrix.org >
[20:58:00] <Lcvette[m]> but im not looking in the right place maybe?
[20:58:24] <hazzy-lab> in the left panel under origin, checkout master
[20:58:41] <hazzy-lab> then you should have it
[20:59:31] <Lcvette[m]> a local master already exists
[20:59:34] <Lcvette[m]> reset local to here?
[20:59:51] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[21:00:48] <Lcvette[m]> hazzy-lab: a local master already exists, reset local to here?
[21:00:54] <hazzy-lab> yes
[21:01:31] <hazzy-lab> hmm, the sliders don't seem to be on gitlab, but the kraken says it pushed successfully
[21:01:51] <hazzy-lab> No
[21:02:02] <Lcvette[m]> ok i did it
[21:02:02] <Lcvette[m]> pull?
[21:02:03] <Lcvette[m]> oh so its not me
[21:02:03] <hazzy-lab> I think the kraken is brokem lol
[21:02:10] <Lcvette[m]> waaaaa
[21:02:16] <hazzy-lab> restarting it
[21:02:28] <Lcvette[m]> want me to fix it?
[21:02:32] <Lcvette[m]> hahahahaha
[21:02:56] <hazzy-lab> haha
[21:03:10] * hazzy-lab goes to get a sledge hammer
[21:03:24] <hazzy-lab> that usually fixes the kraken xD
[21:04:43] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[21:04:43] <Lcvette[m]> i restarted mine too
[21:04:43] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[21:04:44] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed new project branch probe_basic_1920 at Hazzy / QtPyVCP ( https://gitlab.com )
[21:05:29] * hazzy-m uploaded an image: Screenshot_2018-08-16_21-05-16.png (45KB) < https://matrix.org >
[21:05:51] <hazzy-lab> the kraken shows it pushed, but it is not on gitlab???
[21:06:13] <hazzy-lab> hurray!
[21:06:18] <hazzy-lab> not it's there
[21:06:24] <hazzy-lab> it was slow for some reason
[21:06:33] <hazzy-lab> now*
[21:07:29] <Lcvette[m]> wtf
[21:07:50] <Lcvette[m]> how do i put master back from checkout?
[21:08:21] <hazzy-lab> just checkout your brope_basic branch
[21:08:22] <Lcvette[m]> ok i did it
[21:08:23] <Lcvette[m]> now what do i do?
[21:08:41] <hazzy-lab> just launch it as usual
[21:08:46] <hazzy-lab> it should run
[21:09:02] <Lcvette[m]> i didn't merge anyhting
[21:09:09] <hazzy-lab> you don't need to
[21:09:11] <Lcvette[m]> you merged it?
[21:09:20] <Lcvette[m]> and branched it
[21:09:37] <hazzy-lab> no, but they are on different branches , so no need to merge
[21:10:03] <hazzy-lab> actually, different origins, same branch
[21:11:11] <Lcvette[m]> sliders are the same as befroe
[21:11:26] <hazzy-lab> excellent!
[21:11:40] <hazzy-lab> did not mess up the size of the screen or anything?
[21:11:50] <Lcvette[m]> no i mean they are the same as in spin boxes still
[21:12:00] <hazzy-lab> oh
[21:12:04] <hazzy-lab> lol
[21:12:21] <Lcvette[m]> and override isn't working
[21:12:21] <hazzy-lab> what does the kraken look like?
[21:12:39] <hazzy-lab> punch the poor button again xD
[21:13:12] * Lcvette[m] uploaded an image: image.png (222KB) < https://matrix.org >
[21:13:30] <hazzy-lab> aha
[21:13:57] <hazzy-lab> double click on the branch with my logo, the second from the top
[21:14:18] <Lcvette[m]> the circle or the flag?
[21:14:34] <hazzy-lab> the flag
[21:15:03] <Lcvette[m]> says a local probe_basic_1920 already exists
[21:15:56] * Lcvette[m] uploaded an image: image.png (230KB) < https://matrix.org >
[21:16:38] <hazzy-lab> reset local
[21:16:58] <hazzy-lab> that is safe to do as long as you have all your changes commited (which you do)
[21:17:59] <Lcvette[m]> max velocity is broken
[21:18:03] <Lcvette[m]> the other 3 work
[21:18:21] <hazzy-lab> I did not change it, just the three override sliders
[21:18:32] <hazzy-lab> working on the vel sliders next
[21:18:39] <hazzy-lab> is everything else OK?
[21:19:00] <Lcvette[m]> you changed my sizing
[21:19:07] <Lcvette[m]> x|
[21:19:23] <hazzy-lab> Ok, I tried not to, but I can't see it on the screen
[21:19:30] <hazzy-lab> so I am working blind
[21:19:31] <hazzy-lab> lol
[21:19:41] <hazzy-lab> sorry :(
[21:20:13] <Lcvette[m]> did i loose my style sheet?
[21:20:30] <hazzy-lab> should not have
[21:21:04] <Lcvette[m]> ok, then i'll fix it after you get the last one working!
[21:21:04] <Lcvette[m]> :)
[21:21:14] <hazzy-lab> sounds good!
[21:21:20] <hazzy-lab> but at least they are there!
[21:21:28] * jschi[m] uploaded an image: Screen Shot 2018-08-16 at 9.20.47 PM.png (48KB) < https://matrix.org >
[21:21:30] <hazzy-lab> thanks for checking!
[21:21:38] <TurBoss> hazzy-lab: i sthe slidersWidget2 branch needed?
[21:21:46] <TurBoss> or I can nuke it?
[21:21:59] <jschi[m]> JogIncrement - reading from `INCREMENTS`
[21:22:03] <hazzy-lab> TurBoss: I don't think it is needed
[21:22:10] <Lcvette[m]> wife landed, back after she goes to bed
[21:22:15] <hazzy-lab> jschi[m]: That looks great!
[21:22:20] <Lcvette[m]> NICE JEFF!!!!!
[21:23:00] <jschi[m]> hazzy - I need to look to associate these with actions - any good places to look in the code for examples of such
[21:23:49] <jschi[m]> Each of the buttons is an action button - I guess I'll look @ axis/gmoccapy for inspiration
[21:24:17] <jschi[m]> To be fair it won't look that good if we have units expressed or anything more that width of text
[21:24:22] <jschi[m]> but it's a start
[21:24:57] <jschi[m]> So I was going to attach an led indicator to 'active' or selected state - or I can dig into actions
[21:25:06] <jschi[m]> both need to be done
[21:25:55] <TurBoss> nuked
[21:27:53] <hazzy-lab> jschi[m]: I think all you need to do is add a jog_increment variable to the status.py module, and when the jog inc is changed just set it by STATUS.jog_incraments = inc_value, then the jogging actions and any other widgets can and easily access it
[21:28:23] <jschi[m]> kk
[21:28:31] <hazzy-lab> jschi[m]: the status module is a singleton, so state is shared across all imports
[21:28:45] <jschi[m]> will do
[21:49:26] -!- hazzy-lab has quit [Ping timeout: 260 seconds]
[21:50:12] -!- hazzy-lab has joined #hazzy
[21:50:12] -!- mode/#hazzy [+o hazzy-lab] by ChanServ
[22:20:08] <Lcvette[m]> what i miss?
[22:25:14] <Lcvette[m]> damn you hazzy
[22:25:26] <Lcvette[m]> lol
[22:25:30] <Lcvette[m]> un stretch my sliders
[22:26:46] <Lcvette[m]> im trying to fix the margins and they stretch
[22:28:11] <Lcvette[m]> its ok, i fu's it in the group box style sheet
[22:28:15] <Lcvette[m]> fu'd
[22:34:07] <Lcvette[m]> sliders are broken
[22:34:23] <Lcvette[m]> when i opened it up they all say estop now?
[22:34:32] <Lcvette[m]> and all threemove together?
[22:35:03] * Lcvette[m] uploaded an image: image.png (193KB) < https://matrix.org >
[22:50:31] <hazzy-lab> LOL
[22:50:51] <hazzy-lab> it you want to be happy you have to use the sad QtDesigner
[22:50:54] <hazzy-lab> :P
[22:51:06] <hazzy-lab> hmm
[22:55:36] <Lcvette[m]> Yeah I think the happy qtd broke it
[22:55:47] <Lcvette[m]> I got 3 messages when I opened it
[22:55:51] <hazzy-lab> it did
[22:55:53] <hazzy-lab> :(
[22:56:11] <hazzy-lab> it is easy to fix in the sad designer
[22:56:21] <Lcvette[m]> Is there a way to make an icon to open the sad designer?
[22:56:33] <Lcvette[m]> It takes me forever to use the terminal
[22:56:34] <hazzy-lab> yes
[22:56:51] <Lcvette[m]> And I open and close alot
[22:56:56] <hazzy-lab> I have a solution for you, but it will take me a bit to finish it
[22:57:03] <Lcvette[m]> Ok
[22:57:06] -HaikuBot[m]:#hazzy- Is there a way to
[22:57:07] -HaikuBot[m]:#hazzy- make an icon to open
[22:57:08] -HaikuBot[m]:#hazzy- the sad designer?
[22:57:09] <hazzy-lab> but I think you will like it!
[22:57:25] <Lcvette[m]> Nice!!
[22:57:46] <Lcvette[m]> You know it's getting a frowny face
[22:57:55] <Lcvette[m]> Lol
[23:12:15] * TurBoss uploaded an image: Captura de pantalla de 2018-08-17 05-11-57.png (210KB) < https://matrix.org >
[23:12:37] <hazzy-lab> TurBoss: very nice!!!
[23:12:49] <Lcvette[m]> You did it?
[23:12:56] <TurBoss> very stolen from ppc
[23:12:57] <Lcvette[m]> We have too table functioning?
[23:12:57] <TurBoss> :P
[23:13:04] <TurBoss> jut read
[23:13:10] <TurBoss> *just
[23:13:50] <TurBoss> hazzy-lab: instead of model thing here is just setItem(1,0,thing)
[23:13:50] <Lcvette[m]> Hurray!
[23:14:07] <hazzy-lab> hey, I know those tools, that is my tooltable! xD
[23:14:19] <Lcvette[m]> Hurray
[23:14:24] <TurBoss> :P
[23:14:28] <hazzy-lab> TurBoss: nice, that is easier
[23:14:32] <Lcvette[m]> It comes with free tools
[23:14:53] <TurBoss> tools from mini.ini
[23:16:31] <hazzy-lab> Oh, i did not know I included the tooltable, good
[23:19:52] <jschi[m]> ok, good progress tonight - I have the JogIncrement actions wired to STATUS.setJogIncrement - along with some todos on that side (e.g. parse units, etc)
[23:20:38] <jschi[m]> I've added the JogIncrement widget to my copy of probe_basic_1920 but I'm sure its changed - not sure how messy that merge will be.
[23:21:29] <jschi[m]> I'll try to clean this up in the am and shoot up a PR of this as is - still thinking about Led indicator or something more pronounced than the the current 'selected' state
[23:22:22] <Lcvette[m]> I like LEDs :)
[23:23:58] <jschi[m]> do you want to mock one up on the existing UI? placement is tricky with the lack of space - I saw a button that used an LED like indicator running down the left side of the button - as if it came from behind the bezel
[23:24:06] <jschi[m]> pretty slick effect - trying to find it again
[23:24:56] * jschi[m] uploaded an image: Screen Shot 2018-08-16 at 11.24.21 PM.png (193KB) < https://matrix.org >
[23:26:08] <jschi[m]> don't really need the 'off' state but the 'on' state reflects the true selectedness, looks like an led and takes a bit of border area instead of occupying real estate on the button itself
[23:26:10] <Lcvette[m]> I can move the text
[23:26:13] <hazzy-lab> you might be able to get close to that by simply setting one of the button borders
[23:26:41] <Lcvette[m]> For LEDs
[23:26:45] <Lcvette[m]> I tried that
[23:26:46] <jschi[m]> yeah
[23:26:46] <jschi[m]> maybe even with just a style on :selected
[23:26:56] <hazzy-lab> right
[23:27:06] <Lcvette[m]> I prefer the whole button color change of no LEDs
[23:27:10] <TurBoss> there is an example of how to use qml as qtwidget
[23:27:25] <TurBoss> DynATC branch
[23:27:32] <jschi[m]> yeah, @tu
[23:27:37] <jschi[m]> damn
[23:27:40] <jschi[m]> yes - saw that
[23:27:48] <TurBoss> great
[23:29:15] <jschi[m]> Lcvette not sure I understand - change the whole button with no led? or change button with PP like LED indicator or other?
[23:30:15] <Lcvette[m]> saying i'd prefer either the button change or the led
[23:30:22] <Lcvette[m]> over the border change idea
[23:30:35] * jschi[m] uploaded an image: Screen Shot 2018-08-16 at 11.30.00 PM.png (38KB) < https://matrix.org >
[23:30:37] <Lcvette[m]> i played with the border chnage
[23:31:01] <jschi[m]> IMO this is too subtle - bad shop lighting etc and one will wonder
[23:31:14] <hazzy-lab> I agree
[23:31:30] <hazzy-lab> you can make that more pronounced in the style sheet though ..
[23:31:32] <Lcvette[m]> yours must be broken
[23:31:45] <hazzy-lab> jschi[m]: have you run the brender.ini example?
[23:31:58] <jschi[m]> I don't think so
[23:32:17] * Lcvette[m] uploaded an image: image.png (8KB) < https://matrix.org >
[23:32:21] <jschi[m]> ah
[23:32:28] <jschi[m]> damn - that's more pronounced for sure
[23:32:38] <Lcvette[m]> lol
[23:33:04] <jschi[m]> ok, I should probably stash and resync - is this on master ? or still on your probe_1920 branch?
[23:33:08] <Lcvette[m]> the real thing glows even more
[23:33:25] <Lcvette[m]> um.. think they are merged now
[23:33:35] <Lcvette[m]> but both should work the same way
[23:33:42] <jschi[m]> ok, I'll rebase in the am and see where we are at
[23:33:44] <jschi[m]> kk
[23:34:06] <jschi[m]> I'm heading to bed - back at it early am
[23:34:14] <Lcvette[m]> k... awesome work man!!
[23:34:17] <hazzy-lab> sounds good!
[23:34:23] <jschi[m]> yep - thanks all
[23:34:23] <hazzy-lab> night jeff!
[23:34:27] <TurBoss> n8
[23:34:31] <Lcvette[m]> night!
[23:44:28] * Lcvette[m] uploaded an image: face-sad.png (4KB) < https://matrix.org >
[23:55:16] <hazzy-lab> lol
[23:58:39] <Lcvette[m]> hes ready for his new home