#hazzy | Logs for 2018-08-17

Back
[00:13:06] -!- hazzy-lab has quit [Remote host closed the connection]
[00:13:19] -!- hazzy-lab has joined #hazzy
[00:13:19] -!- mode/#hazzy [+o hazzy-lab] by ChanServ
[00:19:41] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[00:20:47] <Lcvette[m]> What's that part?
[00:20:52] <Lcvette[m]> Push?
[00:21:23] <hazzy-lab> some more work in the status labels
[00:21:27] <hazzy-lab> not much
[00:21:37] <hazzy-lab> TurBoss: the tooltable looks great!
[00:21:44] <Lcvette[m]> What's a status label?
[00:21:46] <TurBoss> just pushed
[00:21:59] <TurBoss> to actually load it
[00:22:55] <hazzy-lab> Lcvette[m]: the status label is used for displaying all the LCNC states, current vel, OR values etc.
[00:23:18] <hazzy-lab> pretty much every DRO that is not an axis pos DRO
[00:23:19] <TurBoss> hazzy-lab: I just pushed again
[00:23:26] <TurBoss> 🍭
[00:23:28] <hazzy-lab> TurBoss: checking!
[00:23:39] <hazzy-lab> thanks for the candy :D
[00:23:55] <TurBoss> I don't know why the title of the columns are not shown
[00:24:18] <TurBoss> mini.ini loads it
[00:24:41] <hazzy-lab> hmm, that is strange, that are just numbers
[00:24:46] <hazzy-lab> they*\
[00:24:52] <TurBoss> yes
[00:25:00] <TurBoss> 😓
[00:25:04] <hazzy-lab> mini is my favorite xD
[00:25:19] <TurBoss> fully working
[00:25:21] <TurBoss> lol
[00:28:32] <Lcvette[m]> Headers not showing?
[00:28:40] <TurBoss> nop
[00:28:52] <TurBoss> just numbers
[00:29:07] <Lcvette[m]> Picture?
[00:30:08] * TurBoss uploaded an image: image.png (20KB) < https://matrix.org >
[00:30:10] <hazzy-lab> TurBoss: maybe this will help: https://gitlab.com
[00:30:23] <hazzy-lab> the headers show on that
[00:30:45] <hazzy-lab> TurBoss: You got it!!!
[00:30:47] * TurBoss uploaded an image: image.png (55KB) < https://matrix.org >
[00:30:59] <TurBoss> 404
[00:31:25] <hazzy-lab> https://gitlab.com
[00:31:32] <Lcvette[m]> I had terrible with the headers to
[00:31:36] <Lcvette[m]> Trouble
[00:31:59] <Lcvette[m]> I had to nuke the display header option and then it was fixed
[00:32:26] <Lcvette[m]> Lost 2 hours finding with it
[00:32:46] <Lcvette[m]> Fiddling*
[00:33:00] <TurBoss> hazzy-lab: 404 again
[00:33:20] <Lcvette[m]> Think there may be a bug with the headers
[00:33:45] <hazzy-lab> wtf?
[00:33:48] <hazzy-lab> it works here lol
[00:33:53] <hazzy-lab> spain is blocked xD
[00:34:10] <TurBoss> 😓
[00:34:15] <TurBoss> great firewall of spain
[00:34:16] <TurBoss> lol
[00:34:25] -HaikuBot[m]:#hazzy- I had to nuke the
[00:34:25] -HaikuBot[m]:#hazzy- display header option and
[00:34:26] -HaikuBot[m]:#hazzy- then it was fixed
[00:34:50] <TurBoss> just for registered members
[00:35:10] <hazzy-lab> ok, try again
[00:35:19] <hazzy-lab> maybe you were not logged in?
[00:35:30] <Lcvette[m]> When I would check the display headers box, and save them open I'd get no headers
[00:35:51] <hazzy-lab> it probably won't help
[00:35:52] <hazzy-lab> lol
[00:36:11] <Lcvette[m]> Then I'd go back into qt designer and the boxes were no longer checked
[00:36:18] <TurBoss> i'm in
[00:36:20] <TurBoss> works
[00:36:36] <Lcvette[m]> There is something buggy
[00:36:47] <Lcvette[m]> With headers
[00:41:02] <hazzy-lab> TurBoss: I think when you clear the table the headers might get cleared too???
[00:41:13] <TurBoss> could be
[00:41:16] <TurBoss> yes
[00:41:17] <TurBoss> I think
[00:42:15] <TurBoss> thats!!!
[00:42:24] <hazzy-lab> Hurray!!
[00:42:46] <hazzy-lab> self.ui.tooltable.setHeaderLabels(["P", "T", "X", "Y", "Z"])
[00:42:48] <hazzy-lab> done
[00:42:49] <hazzy-lab> lol
[00:43:17] <Lcvette[m]> Hurray!!
[00:45:47] <TurBoss> ok fixed
[00:45:50] <TurBoss> ty kcj
[00:45:59] <hazzy-lab> thank you!
[00:46:07] <hazzy-lab> it looks great!
[00:46:13] <Lcvette[m]> You did it TurBoss!!
[00:46:14] <TurBoss> not finished
[00:46:24] <TurBoss> again
[00:46:27] <Lcvette[m]> You did some of it TurBoss!!
[00:46:35] <Lcvette[m]> Lol
[00:46:43] <TurBoss> 😀
[00:47:17] <hazzy-lab> man, looking at your code, it is so much easier than in GTK!
[00:47:24] <hazzy-lab> I love Qt ...
[00:47:41] <TurBoss> at least it works
[00:47:54] <hazzy-lab> yes
[00:48:09] <Lcvette[m]> Hazzy-lab: lcvette sits wondering if your still going to give him a easy launcher ?
[00:48:24] <hazzy-lab> working on it!
[00:48:30] <TurBoss> if you are good
[00:48:38] <Lcvette[m]> I've been good
[00:48:44] <TurBoss> :)
[00:48:44] <hazzy-lab> nah
[00:48:49] <hazzy-lab> :D
[00:48:51] <Lcvette[m]> :p
[00:49:30] * TurBoss uploaded an image: image.png (98KB) < https://matrix.org >
[00:50:39] <Lcvette[m]> Lcvette is on the naughty sudo list? :'(
[00:50:48] <TurBoss> duno
[00:50:54] <TurBoss> only santa knows
[00:51:23] <hazzy-lab> LOL
[00:51:40] <hazzy-lab> I had not see that onw
[00:52:18] <TurBoss> why is santa writing on a paper on the wall if he is sitting on a cmputer?
[00:52:20] <TurBoss> lol
[00:52:28] <hazzy-lab> haha
[00:52:41] <Lcvette[m]> Most be a Windows box
[00:52:44] <hazzy-lab> HDDs tend to fail on the north pole
[00:52:46] <TurBoss> ehehheehehe
[00:52:51] <hazzy-lab> HAHAHAHA
[00:52:54] <TurBoss> so much magnetic fields
[00:52:57] <hazzy-lab> good one Lcvette[m]
[00:53:13] <Lcvette[m]> I have moments
[00:53:19] <hazzy-lab> you are converting, a little :)
[00:53:31] <Lcvette[m]> Lol
[00:54:29] <Lcvette[m]> sudo apt get windows update
[00:54:45] <TurBoss> Activate this copy of linux
[00:54:57] <hazzy-lab> hehe
[00:55:00] <TurBoss> :P
[00:55:07] <hazzy-lab> using the automated phone system
[00:55:16] <hazzy-lab> that does not work
[00:55:56] * TurBoss is tired
[00:56:33] <hazzy-lab> you should be, it is almost 7am :P
[00:56:50] <TurBoss> I'm heading to another field
[00:57:02] <TurBoss> I will continue on tooltable
[00:57:12] <hazzy-lab> ok, thank you!
[00:57:18] <Lcvette[m]> TurBoss pulled an all nighter?
[00:57:28] <hazzy-lab> As usual ...
[00:57:29] <hazzy-lab> xD
[00:58:20] <TurBoss> how I will keep this place safe if not?
[00:58:28] <hazzy-lab> lol
[00:58:43] <hazzy-lab> el chapas would keep it safe
[00:59:14] <Lcvette[m]> No safe there?
[00:59:24] <Lcvette[m]> You can move here TurBoss
[00:59:49] <TurBoss> lol
[01:02:34] <TurBoss> Chapas engarde
[01:02:37] <TurBoss> n8
[01:02:46] <Lcvette[m]> Night!
[01:02:47] <hazzy-lab> night
[01:02:52] <Lcvette[m]> Thanks TurBoss!
[01:43:06] * hazzy-lab falls asleep
[01:43:11] <hazzy-lab> night Lcvette[m]
[01:50:14] <Lcvette[m]> Night
[02:12:48] -!- hazzy-lab1 has joined #hazzy
[02:12:49] -!- mode/#hazzy [+o hazzy-lab1] by ChanServ
[02:14:02] -!- hazzy-lab has quit [Ping timeout: 260 seconds]
[02:14:03] hazzy-lab1 is now known as hazzy-lab
[02:54:19] <Lcvette[m]> microsoft office
[07:11:15] <jschi[m]> hazzy - when you come around - I rebased to master and resolved conflicts. Master has the much simpler probe_basic - I was deving on lcvette's probe_1920 branch to get the updated xyz.ui - I can remove my change to xyz.ui and commit just the widget or ?
[07:11:30] * jschi[m] uploaded an image: Screen Shot 2018-08-16 at 11.30.00 PM.png (38KB) < https://matrix.org >
[07:11:50] * jschi[m] uploaded an image: Screen Shot 2018-08-17 at 7.07.00 AM.png (220KB) < https://matrix.org >
[07:22:03] <jschi[m]> btw, lcvette - when I ran this via linuxcnc last night I saw the blue button selections - didn't show for me in 'preview' mode in the designer
[09:01:06] <Lcvette[m]> hmph.. thats wierd
[09:01:12] <Lcvette[m]> whats preview mode?
[09:04:05] <Lcvette[m]> turboss, you are winning!
[09:07:10] <Lcvette[m]> morning everyone!
[09:07:23] <Lcvette[m]> happy friday!!
[09:07:32] <jschi[m]> ctrl-r in designer brings up the UI in 'run mode'
[09:07:51] <Lcvette[m]> ahhh yes yes
[09:08:13] <Lcvette[m]> yeah that preview is not quite good for really seeing everything
[09:08:15] <Lcvette[m]> i found
[09:08:29] <jschi[m]> right, now i know
[09:09:18] <jschi[m]> I'll cross with hazzy today and get the JogIncrement widget merged in - we can get it placed in your .ui file one way or the other
[09:09:28] <Lcvette[m]> was like a whoile new gui in real mode huh
[09:09:28] <jschi[m]> I have to head to work - back on later today
[09:09:28] <Lcvette[m]> lol
[09:09:44] <Lcvette[m]> sounds good!
[09:33:26] -!- tommylight has joined #hazzy
[09:33:32] <tommylight> crap
[09:33:53] <tommylight> i was writing stuff but it would not show
[09:39:38] <Lcvette[m]> whatcha writing tommy?
[09:43:50] <Lcvette[m]> hazzy-lab: hazzy, i fu'd your slider code and fixed the sliders
[09:44:15] <Lcvette[m]> 🤗
[09:45:49] * Lcvette[m] uploaded an image: image.png (164KB) < https://matrix.org >
[09:53:09] <tommylight> was writing that am still waiting patiently in the corner
[09:53:17] <tommylight> to damn bussy
[09:53:58] <tommylight> have to ship a truck tomorrow and another one on monday
[09:57:58] <tommylight> ship a truck ??????? how is that possible?
[09:59:33] <Lcvette[m]> wait would be shorter if you were less busy
[09:59:33] <Lcvette[m]> lol
[09:59:49] <Lcvette[m]> :p
[10:00:49] <Lcvette[m]> hurry up and finish your chores so you can come play with us
[10:06:13] <tommylight> till 20 september it is like this but even more busy
[10:31:07] <hazzy-lab> Lcvette[m]: Lol, since when do you convert a decimal to a percentage by multiplying by 200???
[10:31:08] <hazzy-lab> xD
[10:31:30] <hazzy-lab> I cry inflation!!
[10:32:07] <Lcvette[m]> i hacked it and it worked..leamealone...lol
[10:32:19] <hazzy-lab> hahahahaha
[10:32:23] <Lcvette[m]> :p
[10:32:46] <Lcvette[m]> fu'd stands for many things
[10:32:58] <Lcvette[m]> hahahaha
[10:34:00] <Lcvette[m]> i was in the matrix, i could see anything but green lines of strange symbols
[10:34:05] <Lcvette[m]> i changed the ones that looked familiar
[10:34:29] <Lcvette[m]> 🤗
[10:34:43] <Lcvette[m]> and then i ate a reeses cup as comfort food
[10:34:52] <Lcvette[m]> due to the traumatic experience
[10:35:25] <hazzy-lab> lol
[10:35:42] <hazzy-lab> I think I need to make more use of the reeses cup treatment!!!
[10:36:36] <Lcvette[m]> my wife brought it for me as a treat from the airport convenience store
[10:36:52] <Lcvette[m]> its our thing, never come home from a trip without a goodie
[10:39:20] <Lcvette[m]> where did you hide the slider widget?
[10:39:31] <hazzy-lab> that is a good tradition!
[10:39:51] <hazzy-lab> in plain sight :D
[10:39:57] <Lcvette[m]> been in my family for generations
[10:40:13] <Lcvette[m]> i need to move the slider bars to make room for the load meter
[10:40:25] <Lcvette[m]> but they won't move in sad face designer
[10:40:25] <hazzy-lab> ok
[10:40:29] <Lcvette[m]> you locked me out
[10:40:37] <hazzy-lab> did you mean where are they in designer?
[10:40:59] <Lcvette[m]> im guessing you made a whole widget?
[10:41:10] <hazzy-lab> yes
[10:41:28] <Lcvette[m]> or ?
[10:41:42] <Lcvette[m]> what did you do?
[10:41:51] <Lcvette[m]> of the qbox
[10:42:01] <Lcvette[m]> oh and check the kraken
[10:42:02] <hazzy-lab> They are just slightly modified QSliders
[10:42:04] <Lcvette[m]> i merged stuff
[10:42:12] <hazzy-lab> ok
[10:42:16] <Lcvette[m]> x|
[10:42:23] <Lcvette[m]> lol
[10:42:25] <Lcvette[m]> morning
[10:42:27] <Lcvette[m]> :)
[10:42:34] <Lcvette[m]> 🤗
[10:42:37] <Lcvette[m]> lol
[10:42:47] <hazzy-lab> hahaha
[10:42:56] * hazzy-lab needs more ocffee
[10:43:06] <Lcvette[m]> better make it strong
[10:43:07] <hazzy-lab> coffee too
[10:43:09] <Lcvette[m]> lol
[10:43:14] <hazzy-lab> I do!
[10:43:18] <Lcvette[m]> think i did ok on the merge
[10:43:25] <Lcvette[m]> i couldn't find the load meter
[10:43:50] <Lcvette[m]> and i remembered you said something about commits making branches
[10:43:58] <Lcvette[m]> so i merged the branch that was formed
[10:44:10] <Lcvette[m]> and accepted all your changes in the conflicts windows
[10:44:15] <Lcvette[m]> think that was right
[10:44:22] <Lcvette[m]> but now theren is a wierd bubble at the top
[10:44:27] <Lcvette[m]> i thought i better leave it for you
[10:44:41] <hazzy-lab> did you push?
[10:44:51] <hazzy-lab> I don;t see anything new in the kraken
[10:45:02] * Lcvette[m] uploaded an image: image.png (246KB) < https://matrix.org >
[10:45:20] <Lcvette[m]> no i was affraid to
[10:46:00] <Lcvette[m]> ok to push?
[10:46:11] <hazzy-lab> yes
[10:46:14] <hazzy-lab> looks fine
[10:46:51] <Lcvette[m]> there was an auto stash before merge it says
[10:46:57] <Lcvette[m]> but i don't want to keep those changes
[10:47:17] <hazzy-lab> then you can delete the satash
[10:47:58] <Lcvette[m]> how?
[10:48:14] <hazzy-lab> right click and delete stash
[10:48:42] <Lcvette[m]> doesn't do anything
[10:48:43] <hazzy-lab> Oh, I see it is not a stash, it lies to you
[10:48:49] <Lcvette[m]> no clicking
[10:48:51] <Lcvette[m]> action
[10:49:17] <hazzy-lab> see the little trash can in the upper left corner of the right panel? Click that guy
[10:49:32] <Lcvette[m]> yes
[10:49:42] <hazzy-lab> That will delete those uncommitted changes which you don't want
[10:49:55] <Lcvette[m]> no no no
[10:50:01] <Lcvette[m]> those changes i want to keep
[10:50:04] <Lcvette[m]> those are new
[10:50:15] <hazzy-lab> oops
[10:50:28] <hazzy-lab> ok
[10:50:34] <Lcvette[m]> i did not delete
[10:50:37] <hazzy-lab> so what are you trying to do? lol
[10:50:42] <Lcvette[m]> is that what those are?
[10:50:52] <Lcvette[m]> if so then i'll push
[10:51:24] <hazzy-lab> 10:46:51 AM - Lcvette[m]: there was an auto stash before merge it says
[10:51:24] <hazzy-lab> 10:46:57 AM - Lcvette[m]: but i don't want to keep those changes
[10:51:32] <hazzy-lab> ^ what did that mean?
[10:51:42] * hazzy-lab is confused
[10:52:21] <Lcvette[m]> lcvette was confused
[10:52:35] <hazzy-lab> haha, ok
[10:52:44] <Lcvette[m]> thought it was the changes from the previous merge
[10:52:51] <hazzy-lab> ah
[10:52:53] <Lcvette[m]> that had been stashed
[10:53:12] <Lcvette[m]> but i popped it like you taught me
[10:53:46] <Lcvette[m]> pushed and everything looks right
[10:54:52] <hazzy-lab> great
[10:54:53] <Lcvette[m]> now why can't i manipulate the slider positions?
[10:55:03] <hazzy-lab> checking
[10:58:48] <hazzy-lab> what do mean by the slider pos? the pos of the handle?
[10:59:35] <Lcvette[m]> no, i want to add the load meter in that box
[10:59:44] <hazzy-lab> Oh
[10:59:49] <Lcvette[m]> and need to move the sliders and boxes etc
[10:59:57] <hazzy-lab> you should be able to add it below
[10:59:57] -HaikuBot[m]:#hazzy- and i remembered
[10:59:58] -HaikuBot[m]:#hazzy- you said something about
[10:59:59] -HaikuBot[m]:#hazzy- commits making branches
[11:00:02] <hazzy-lab> LOL
[11:00:28] <Lcvette[m]> lazy bot
[11:00:29] <Lcvette[m]> lol
[11:00:33] <Lcvette[m]> i was going to add it to the top
[11:00:47] <Lcvette[m]> are they formatted somehow now?
[11:00:53] <hazzy-lab> if you need to brake the layout right click on the box the sliders are in, select layout, and then brake layout
[11:00:55] <Lcvette[m]> like in a layout box?
[11:00:58] <hazzy-lab> Yes
[11:01:13] <Lcvette[m]> oh, i can't see the layout box
[11:02:38] * hazzy-m uploaded an image: Screenshot_2018-08-17_11-01-54.png (54KB) < https://matrix.org >
[11:02:59] <Lcvette[m]> ok
[11:03:10] <hazzy-lab> you should be able to just drag it to where ever you want it in the box, a little blue line will show up indication were it will go
[11:03:12] <Lcvette[m]> how did you do an invisible layout box?
[11:03:23] <hazzy-lab> magic
[11:03:27] <Lcvette[m]> or what did you use to do that?
[11:03:41] <hazzy-lab> I don't know, must be a glitch
[11:03:42] <Lcvette[m]> well i'd like to know
[11:04:15] <Lcvette[m]> ok
[11:04:43] <hazzy-lab> oh, I think it might be because I set the layout on the group box the sliders are in, rather than adding a separate layout widget
[11:05:45] <Lcvette[m]> how do you do that? that is awesome
[11:06:10] <Lcvette[m]> ive wrestled with layout boxes inside group boxes resizing
[11:06:32] <Lcvette[m]> this one works great i can add padding to the qgroup box to set the margins and everything
[11:07:03] <hazzy-lab> right click on the group box and select layout and chose the layout type you want
[11:07:08] <Lcvette[m]> that would make thing smuch less breakable
[11:07:13] <hazzy-lab> yes!
[11:07:40] <hazzy-lab> It make things so much easier to work with when layout are used, and you can move things around as groups
[11:08:00] <Lcvette[m]> i know i was using layouts
[11:08:21] <Lcvette[m]> but they were not connected to the qgroupbox
[11:08:30] <Lcvette[m]> just placed inside
[11:08:39] <hazzy-lab> ah, I see
[11:09:20] <Lcvette[m]> i did it for the dro box and i see now it made the stratch grips pale blue so they are fixed to the qgroupbox dimensions
[11:09:33] <Lcvette[m]> no i can use padding in the stylesheet to set the margins
[11:09:35] <Lcvette[m]> beautimus!!!!
[11:09:45] <hazzy-lab> Hurray!!!
[11:09:51] <Lcvette[m]> Hurray
[11:09:59] <Lcvette[m]> that is really an awesome find!
[11:10:05] <Lcvette[m]> several boxes about to get an update
[11:10:21] <hazzy-lab> excellent!!
[11:12:46] <jschi[m]> hazzy-lab: morning - I dropped a message earlier - I've rebased to master - was working on a branch of lcvette's 1920 to get the updated UI - should I nix the commit to xyz.ui (adding the JogIncrement) and just get a commit up with the widget itself?
[11:15:27] <hazzy-lab> jschi[m]: Which ever you prefer
[11:15:29] <hazzy-lab> I tend to add widgets to master and then merge them into probe basic, but we should probably merge probe basic into master soon, so either way they will get into master soon enough
[11:16:28] <jschi[m]> will do the former - PR coming up targeted at master. Will try to get to it over lunch
[11:16:51] <hazzy-lab> Excellent! Thank you very much
[11:19:06] <Lcvette[m]> sweet!
[11:20:32] <Lcvette[m]> hazzy
[11:20:54] <Lcvette[m]> i tried all morning to get rounded corners on the load meter to no success
[11:20:56] <Lcvette[m]> whats the secret?
[11:21:11] <hazzy-lab> We have to do that in the pain event :(
[11:21:29] <Lcvette[m]> ah
[11:21:38] <hazzy-lab> another solution is to put it inside a QWidget, which you can set the border on
[11:21:55] <hazzy-lab> but that gets a little combersome and is not perfect
[11:22:05] <Lcvette[m]> no
[11:22:07] <Lcvette[m]> no need
[11:22:46] <Lcvette[m]> once i see it in the py file i will know what to do in future situations
[11:22:51] <Lcvette[m]> just need a reference
[11:22:52] <Lcvette[m]> for the first one
[11:22:53] <Lcvette[m]> mnokey see monkey do
[11:26:19] <hazzy-lab> it is not so easy :(
[11:26:42] <Lcvette[m]> for me or for you?
[11:26:43] <hazzy-lab> I have no clue how to add a radius in the pain event
[11:26:53] <hazzy-lab> But I have an idea!!
[11:26:59] <Lcvette[m]> ah
[11:27:07] <hazzy-lab> and massive klude, lol
[11:27:36] <hazzy-lab> kludge
[11:27:37] <Lcvette[m]> KILUDE?
[11:27:42] <Lcvette[m]> klude?
[11:27:45] <hazzy-lab> LOL
[11:29:27] <Lcvette[m]> kludge?
[11:29:33] <hazzy-lab> in the PathPilot code it seem like every code comment starts with "this is a KLUDGE, but ..."
[11:30:13] <hazzy-lab> it is like something that is jury rigged
[11:30:36] <Lcvette[m]> ah
[11:30:40] <hazzy-lab> mis fitting parts are put together top makes something that kinda works, lol
[11:30:54] <hazzy-lab> I do that a lot :)
[11:30:54] <Lcvette[m]> lol
[11:42:17] <TurBoss> yo
[11:43:59] <hazzy-lab> hey TurBoss!
[11:44:12] <Lcvette[m]> morning turboss!
[11:44:14] <TurBoss> morning
[11:47:38] <Lcvette[m]> Jeff, you need an avatar!
[11:48:30] * hazzy-m uploaded an image: Screenshot_2018-08-17_11-48-07.png (4KB) < https://matrix.org >
[11:48:46] <hazzy-m> LOL
[11:48:58] <Lcvette[m]> on here
[11:49:05] <hazzy-lab> ah
[11:49:16] <hazzy-lab> I am not on matrix, xD
[11:49:18] <Lcvette[m]> jschi: you need to add a matrix avatar
[11:49:24] <hazzy-lab> I always for get about those!
[11:50:15] <Lcvette[m]> multiple J's lurking now
[11:52:40] <hazzy-lab> wonder what happed to jackkk, have not seen him for a while
[11:53:28] <Lcvette[m]> dunno
[11:54:54] <Lcvette[m]> are you changing things with the sliders?
[11:54:59] <hazzy-lab> no
[11:55:04] <hazzy-lab> should I be?
[11:55:29] <Lcvette[m]> lol
[11:55:36] <Lcvette[m]> no, but they broke
[11:55:41] <Lcvette[m]> i didn't do it
[11:55:53] <Lcvette[m]> wasn't even touching them
[11:56:04] <Lcvette[m]> and was using sad face designer the whole time
[11:56:17] <Lcvette[m]> just started getting error messages upon opening
[12:01:57] <hazzy-lab> hmm, what are the error messages?
[12:02:06] * hazzy-m uploaded an image: Screenshot_2018-08-17_12-01-10.png (23KB) < https://matrix.org >
[12:02:30] <hazzy-lab> working on a GUI launcher for you :D
[12:02:50] <Lcvette[m]> nice!!!!
[12:03:12] <Lcvette[m]> i tried restarting didn't resolve but the error messages went away on startup in the designer
[12:03:24] <Lcvette[m]> but still showing broken sliders
[12:03:34] <Lcvette[m]> should have gotten a snap shot of the errors
[12:03:51] <hazzy-lab> they are broken in that they all move together?
[12:04:10] <Lcvette[m]> yeah showing estop again
[12:04:18] <Lcvette[m]> and they all slide together
[12:04:40] <hazzy-lab> ok, in the sad designer click on one of the sliders and scroll to the very bottom of the properties
[12:04:58] <hazzy-lab> there should be a override type property
[12:05:05] <Lcvette[m]> estop in the percentage readout boxes
[12:05:06] <hazzy-lab> chose the one you want
[12:05:35] <hazzy-lab> then click on the readout boxes and scroll down, and select which value you want them to show
[12:05:38] * Lcvette[m] uploaded an image: image.png (146KB) < https://matrix.org >
[12:06:04] <hazzy-lab> I like the load meter@!
[12:07:06] <Lcvette[m]> needs work
[12:07:29] <Lcvette[m]> but i was distracted by the new found layout functionality
[12:07:30] <Lcvette[m]> lol
[12:08:12] <Lcvette[m]> going to build some gradient stops for it
[12:08:18] <Lcvette[m]> see if paint takes them ok
[12:09:01] <Lcvette[m]> sliders are fixed
[12:09:10] <hazzy-lab> great!
[12:09:19] <Lcvette[m]> fixed them with shear will power alone
[12:19:44] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Jeff Schilling opened merge request #2: JogIncrement Widget at Hazzy / QtPyVCP ( https://gitlab.com )
[12:20:17] <jschi[m]> hazzy-lab: ^^^ PR is up and I'm off to grab a bite
[12:35:33] <Lcvette[m]> hazzy, take a peak at this and tell me if its a lost cause or if its a syntax somewhere that can be fixed?
[12:35:57] * Lcvette[m] posted a file: load_meter.py (3KB) < https://matrix.org >
[12:37:45] <Lcvette[m]> lcvette is off afk for 30
[12:50:45] <TurBoss> checking
[12:56:48] <Lcvette[m]> TurBoss you checking my file?
[12:56:48] <Lcvette[m]> :-)
[12:57:38] <hazzy-lab> at least I got A gradient :D
[12:57:55] * hazzy-m uploaded an image: Screenshot_2018-08-17_12-57-13.png (20KB) < https://matrix.org >
[12:58:01] <hazzy-lab> this is going to work!!!
[12:58:08] <TurBoss> yes
[12:58:21] <Lcvette[m]> Not at all what my gradient l looked like
[12:58:22] <Lcvette[m]> Lol
[12:58:28] <Lcvette[m]> I carefully staged the 3
[12:58:28] <TurBoss> so no need to check?
[12:58:35] <TurBoss> looks good
[12:58:36] <Lcvette[m]> To blend at the joints
[12:59:05] <hazzy-lab> Lcvette[m]: I am not to to point of trying to get yours working
[12:59:12] <hazzy-lab> it was very badly broke, lol
[12:59:14] <TurBoss> is the same?
[12:59:18] <Lcvette[m]> And used the right colors
[12:59:25] <hazzy-lab> but at least I have something working!
[12:59:46] <Lcvette[m]> No
[12:59:49] <Lcvette[m]> Lol
[12:59:56] <hazzy-lab> g = QLinearGradient(0, 0, self.height(), 50)
[12:59:56] <hazzy-lab> g.setColorAt(0, Qt.green)
[12:59:56] <hazzy-lab> g.setColorAt(1, Qt.yellow)
[12:59:56] <hazzy-lab> p.setPen(Qt.green)
[12:59:56] <hazzy-lab> p.setBrush(g)
[13:00:00] <Lcvette[m]> My gradients came straight from designer
[13:00:09] <hazzy-lab> You cant set it like you were
[13:00:13] <hazzy-lab> have to do it like that
[13:00:20] <hazzy-lab> setColorAt for each point
[13:00:40] <Lcvette[m]> Oh
[13:01:16] <hazzy-lab> Lcvette[m]: python and the painter does not understand QSS style sheet
[13:01:18] <hazzy-lab> xD
[13:01:38] <Lcvette[m]> Because it's dumb
[13:01:46] <Lcvette[m]> Lol
[13:02:44] <Lcvette[m]> Hmm lcvette Google style sheet to puthon gradient converter
[13:03:11] <hazzy-lab> lol, good luck!
[13:05:41] <Lcvette[m]> No luck
[13:07:17] <Lcvette[m]> Ok, back to work on more important things Hazzy, I'll figure this out
[13:07:46] <Lcvette[m]> Didn't mean to distract you just wanted a quick pro look
[13:19:41] <TurBoss> file://
[13:19:43] <TurBoss> oops
[13:20:00] -!- tommylight has quit [Ping timeout: 252 seconds]
[13:20:34] * TurBoss posted a file: da.py (3KB) < https://matrix.org >
[13:20:51] <TurBoss> Lcvette: not working
[13:20:58] <TurBoss> python is case sensitiv
[13:21:01] <TurBoss> e
[13:23:58] * hazzy-m uploaded an image: Peek 2018-08-17 13-23.gif (47KB) < https://matrix.org >
[13:25:23] <TurBoss> wooow
[13:25:24] <TurBoss> !
[13:26:08] * hazzy-m uploaded an image: Peek 2018-08-17 13-25.gif (43KB) < https://matrix.org >
[13:26:31] <TurBoss> much better
[13:31:37] <jschi[m]> nice
[13:37:42] * hazzy-m uploaded an image: Peek 2018-08-17 13-37.gif (41KB) < https://matrix.org >
[13:38:07] <hazzy-lab> Lcvette[m]: is that kinda what the colors you had were like?
[13:39:35] <Lcvette[m]> yeah
[13:39:39] <Lcvette[m]> getting there!
[13:40:11] <Lcvette[m]> esxcept red at the end
[13:40:37] <hazzy-lab> ok
[13:41:34] <Lcvette[m]> looks like you got the two first gradients
[13:42:18] <Lcvette[m]> the thrid took it from the orange to deep red
[13:47:29] * Lcvette[m] uploaded an image: image.png (1KB) < https://matrix.org >
[13:47:38] * hazzy-m uploaded an image: Screenshot_2018-08-17_13-47-27.png (4KB) < https://matrix.org >
[13:48:12] <hazzy-lab> Lcvette[m]: Thanks! Now I know what I am aiming for
[13:48:14] * Lcvette[m] uploaded an image: image.png (1KB) < https://matrix.org >
[13:48:34] <Lcvette[m]> those were the 3 gradient in the file i sent
[13:48:53] <hazzy-m> it's kinda hard to trnaslate them
[13:49:22] <Lcvette[m]>
[13:49:23] <Lcvette[m]> qlineargradient(spread:reflect, x1:0, y1:0, x2:1, y2:0, stop:0 rgba(254, 162, 55, 255), stop:0.225641 rgba(231, 87, 29, 255), stop:0.451282 rgba(217, 40, 13, 255), stop:1 rgba(204, 0, 0, 255))
[13:49:24] <Lcvette[m]> red one
[13:49:36] <hazzy-m> great!
[13:51:32] <TurBoss> Lcvette: got some error with your file
[13:51:42] <TurBoss> do you still needit?
[13:51:44] * hazzy-m uploaded an image: Screenshot_2018-08-17_13-51-33.png (4KB) < https://matrix.org >
[13:52:04] <hazzy-lab> I'll let you finish it Lcvette[m]
[13:52:05] <hazzy-lab> :p
[13:52:06] <TurBoss> looks like a flame
[13:52:14] <hazzy-lab> it does, lol
[13:52:56] <Lcvette[m]> now the set points should be the yellow just fanning the blue at the 100% mark
[13:53:05] <Lcvette[m]> this will be on a 200% scale
[13:53:55] <Lcvette[m]> i would set the break points at 110% 140%
[13:55:27] <Lcvette[m]> ok
[13:55:31] <Lcvette[m]> i can finish it
[13:55:44] <Lcvette[m]> its beautiful
[13:55:45] <Lcvette[m]> lol
[13:58:18] -HaikuBot[m]:#hazzy- now the set points should
[13:58:19] -HaikuBot[m]:#hazzy- be the yellow just fanning
[13:58:20] -HaikuBot[m]:#hazzy- the blue at the 100% mark
[13:59:56] <Lcvette[m]> hey Jeff... you have an avatar!
[14:00:05] <Lcvette[m]> sweet!
[14:00:14] <jschi[m]> #goals
[14:00:22] <hazzy-lab> haha
[14:00:25] <Lcvette[m]> hahahaha
[14:02:23] <Lcvette[m]> you pushing that thing hazzy?
[14:18:29] <TurBoss> ???
[14:20:47] <Lcvette[m]> lcvettes imagines hazzy sliding the new colorful widget back and forth mesmerized by its beauty... and saying in a hushed tone "its mine....my precious....." lol
[14:24:08] <hazzy-lab> xD
[14:24:16] <hazzy-lab> pretty much
[14:24:23] <hazzy-lab> trying to get the border to work ...
[14:24:28] * TurBoss heads up to the tool table
[14:25:08] <TurBoss> does the tool table need all the buttons?
[14:25:14] <TurBoss> workflow etc?
[14:25:52] <Lcvette[m]> i dunno
[14:26:14] <Lcvette[m]> those are the standard buttons on the linuxcnc tool table
[14:26:22] <Lcvette[m]> so i assume yes?
[14:26:28] <TurBoss> true
[14:26:48] <TurBoss> what kcj thinks?
[14:39:43] <TurBoss> whats the diference of reload table and re read?
[14:39:47] <TurBoss> reload reloads the table on linuxcnc
[14:39:51] <TurBoss> and re read reads the file?
[14:40:09] <Lcvette[m]> not sure
[14:42:35] <hazzy-lab> TurBoss: that is correct
[14:42:41] <hazzy-lab> I think we can get rid of at least one of the buttons
[14:42:58] <TurBoss> only reload and does both?
[14:43:29] <hazzy-lab> yes, I think that would be ok
[14:43:35] <hazzy-lab> and maybe auto save it ...
[14:43:56] <hazzy-lab> it is so easy to forget to save it after making changes and causes the machine to crash
[14:44:38] <TurBoss> ok
[15:07:30] * hazzy-m uploaded an image: Screenshot_2018-08-17_15-07-21.png (3KB) < https://matrix.org >
[15:07:57] <hazzy-lab> Lcvette[m]: added border with rounded edges
[15:08:01] <hazzy-lab> passing over to you
[15:08:26] <hazzy-lab> pushing to the hazzy LoadMeter branch
[15:09:59] <Lcvette[m]> sweet!
[15:10:12] <Lcvette[m]> looks awesome!!
[15:12:35] <TurBoss> in the tool table there is a selected column
[15:12:44] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch LoadMeter at Hazzy / QtPyVCP ( https://gitlab.com )
[15:12:52] <TurBoss> what represents it on the tool table file?
[15:13:59] <hazzy-lab> jschi[m]: quick feedback on your PR
[15:13:59] <hazzy-lab> I don't think it is a good idea to use UI files, as that requires editing the widget's source to customize it per VCP
[15:13:59] <hazzy-lab> other than that is looks good
[15:13:59] <hazzy-lab> I'll look it over more tonight
[15:14:53] <TurBoss> hazzy-lab: I'm using ui files for the tool table isn't good?
[15:14:56] <hazzy-lab> TurBoss: it is not represented in the tooltable file, this is just to select which one to delete etc.
[15:14:58] -HaikuBot[m]:#hazzy- hazzy-lab: I'm
[15:14:59] -HaikuBot[m]:#hazzy- using ui files for the tool
[15:14:59] -HaikuBot[m]:#hazzy- table isn't good?
[15:15:07] <TurBoss> ah
[15:15:09] <TurBoss> ok
[15:15:30] <TurBoss> I'll just use the row that has focus
[15:15:38] <hazzy-lab> TurBoss: I think that is OK since the tooltable is a composite widget
[15:15:54] <TurBoss> ok
[15:16:06] <hazzy-lab> TurBoss: it is better to use the focus row!
[15:16:21] <hazzy-lab> ok, gtg
[15:16:22] <hazzy-lab> bbl
[15:19:46] <jschi[m]> Thx for the feedback hazzy. Wondering what the customization story is when one does addItem on a button. Good feedback, that’s why I asked. I’ll be back at a computer in a few hours and happy to help look at that some more
[15:26:36] -!- Roguish has quit [Read error: Connection reset by peer]
[15:27:11] -!- Roguish has joined #hazzy
[15:27:28] -!- Roguish has quit [Client Quit]
[15:50:06] <jschi[m]> hazzy - I'm happy to reimplement with the controls being manually created - is the plan to use external styling if we want to change fonts, colors etc?
[15:54:15] -!- Roguish has joined #hazzy
[15:55:59] <Lcvette[m]> turboss
[15:56:04] <TurBoss> yo
[15:56:15] <Lcvette[m]> do you know how to use the color chooser in sublime?
[15:56:45] <TurBoss> nope
[16:08:32] <hazzy-m> Lcvette it is a plug-in, you'll have to install it, I'll be back I a few
[16:09:22] <TurBoss> atom.io
[16:09:26] <TurBoss> :P
[16:09:31] <TurBoss> it has plugins too
[16:15:15] <hazzy-lab> atom.io is so slow ....
[16:15:17] <hazzy-lab> :p
[16:15:48] <TurBoss> it is
[16:16:15] <TurBoss> just increased swap space from 500mb to 4GB without reboot
[16:16:16] <TurBoss> :P
[16:16:22] <TurBoss> on a server
[16:16:26] <hazzy-lab> nice!!
[16:16:36] <TurBoss> lvm is fantastic
[16:16:52] <hazzy-lab> it is amazing what you can do with linux
[16:18:00] <TurBoss> a dev told me that the build bot was out of memory
[16:18:19] <TurBoss> I said give a sek...
[16:18:24] <TurBoss> 😚
[16:18:40] <hazzy-lab> nice!
[16:21:07] <hazzy-lab> Lcvette[m]: in sublime type ctrl + shift + P
[16:21:23] <hazzy-lab> then type Package Control: install package
[16:21:30] <hazzy-lab> then type ColorPicker
[16:21:35] <hazzy-lab> and hit enter
[16:21:42] <hazzy-lab> that should do it
[16:22:36] <hazzy-lab> then select a hex color and type ctrl + shift + C to pick a color
[16:22:37] -HaikuBot[m]:#hazzy- then select a hex
[16:22:37] -HaikuBot[m]:#hazzy- color and type ctrl + shift + C
[16:22:38] -HaikuBot[m]:#hazzy- to pick a color
[16:23:32] <hazzy-lab> Tom is right, Haiku is like a four year old, repeats everything and thinks it is funny
[16:23:34] <hazzy-lab> :D
[16:24:46] -!- HaikuBot[m] has parted #hazzy
[16:24:51] <TurBoss> nuked
[16:24:52] <hazzy-lab> LOL
[16:25:25] <TurBoss> used to be fun
[16:25:33] <TurBoss> poor haikubot
[16:25:39] <TurBoss> 😎
[16:29:19] <Lcvette[m]> sorry had matrix covvered with sublime and the designer
[16:29:32] * Lcvette[m] uploaded an image: image.png (352KB) < https://matrix.org >
[16:29:45] <TurBoss> Oo
[16:29:51] <Lcvette[m]> found a quick way to fu the gradient from qt to python
[16:30:02] <Lcvette[m]> cause im a phuggin color ninja
[16:30:09] <Lcvette[m]> waaaaa
[16:30:09] <TurBoss> :)
[16:30:13] -!- hazzy-lab has quit [Read error: Connection reset by peer]
[16:30:39] <hazzy-m> Looks awesome!
[16:31:18] <Lcvette[m]> i used qt designer to build the gradient using the top point as a reference for the percentage placements i wanted
[16:31:29] <Lcvette[m]> then just transfered it over to the python file
[16:31:37] <Lcvette[m]> followed your python fu
[16:31:45] -!- hazzy-lab has joined #hazzy
[16:31:45] -!- mode/#hazzy [+o hazzy-lab] by ChanServ
[16:32:21] <Lcvette[m]> top =stop
[16:32:25] <Lcvette[m]> lol
[16:32:29] <Lcvette[m]> chinese keyboard
[16:33:32] <Lcvette[m]> kiss my ass mach3 and PP
[16:33:35] <Lcvette[m]> lol
[16:33:37] <Lcvette[m]> waaaa
[16:33:44] <hazzy-lab> haha
[16:34:00] <hazzy-lab> I was just thinking it is looking pretty sharp!
[16:34:37] <hazzy-lab> might should post that to the forum ...
[16:35:04] <Lcvette[m]> 🐼🐼🐼
[16:35:40] <Lcvette[m]> yeah but the diggity sliders broke again
[16:35:53] <jschi[m]> I switched to VSCode - on my mac during the daytime but even in linux running in vbox it's pretty good - updates every week or two unlike sublime
[16:36:20] <jschi[m]> decided that Vim contributed to wrist issues so gave it up
[16:36:31] <TurBoss> I use pycharm
[16:36:46] <Lcvette[m]> i use what hazzy put on the box
[16:36:48] <Lcvette[m]> lol
[16:36:50] <jschi[m]> lol
[16:36:56] <TurBoss> hhahahaha
[16:37:28] <Lcvette[m]> cause im dumb and often need saving
[16:37:36] <Lcvette[m]> and he knows where everything is\
[16:37:41] <jschi[m]> I'm a language polyglot - JS/Node during the day, C++/Arduino stuff @ night, GCODE when I can and others as necessary
[16:37:59] <jschi[m]> +1 for that
[16:42:45] <Lcvette[m]> pushed the new load meter merge
[16:43:09] <Lcvette[m]> thats alot of languages jeff!
[17:07:51] <TurBoss> hazzy
[17:07:59] <TurBoss> I'm unable to save tool number
[17:08:06] <TurBoss> it forces 1 in all tools
[17:13:17] <TurBoss> I think I found it
[17:14:25] <TurBoss> I think I found it
[17:14:27] <TurBoss> opps
[17:20:27] <Lcvette[m]> you fixed it turboss?
[17:20:47] <TurBoss> not yet
[17:36:11] <TurBoss> got it
[17:43:06] <TurBoss> partially
[18:01:34] <Lcvette[m]> lol
[18:04:01] <Lcvette[m]> grrrr.. i can't fix these damned sliders
[18:04:07] <Lcvette[m]> still showing estop
[18:59:19] * Lcvette[m] uploaded an image: image.png (353KB) < https://matrix.org >
[18:59:41] <Lcvette[m]> little more tweaking and i think i got the load meter dialed in with the other sliders
[18:59:42] <Lcvette[m]> :)
[19:03:06] * Lcvette[m] uploaded an image: image.png (353KB) < https://matrix.org >
[19:04:31] <hazzy-lab> what is the gradient at an angle in the load meter?
[19:04:53] <hazzy-lab> why*
[19:05:42] <Lcvette[m]> dunno....must be a python thing
[19:05:51] <Lcvette[m]> its straight in designer
[19:05:59] <Lcvette[m]> when i source it
[19:06:34] <hazzy-lab> ok, ill look into it
[19:06:38] <Lcvette[m]> i can't fix the sliders again
[19:06:39] <Lcvette[m]> :(
[19:07:09] <Lcvette[m]> i want to pist tot he forum but would love to have the sliders reading
[19:07:46] <hazzy-lab> why can't you fix them like you did before?
[19:08:31] <Lcvette[m]> cause i didn't fix them before they just started working again
[19:08:32] <Lcvette[m]> lol
[19:08:50] <hazzy-lab> lol
[19:08:57] <hazzy-lab> are you in the sad designer?
[19:09:13] * Lcvette[m] uploaded an image: image.png (1KB) < https://matrix.org >
[19:09:22] <Lcvette[m]> straight
[19:09:31] <Lcvette[m]> yes only workig in sad designer anymore
[19:09:38] <Lcvette[m]> even thought it SUCKS to open each time
[19:10:01] <Lcvette[m]> the slant looks pretty cool
[19:10:09] <Lcvette[m]> doesn't bother me
[19:10:59] <hazzy-m> Ok
[19:11:10] <Lcvette[m]> oh and i found the stretch thing
[19:11:11] <Lcvette[m]> :)
[19:11:13] <Lcvette[m]> in love it
[19:11:30] <Lcvette[m]> a;ong with the layouts
[19:11:30] <TurBoss> hazzy: tooltable is almost finished
[19:11:37] <Lcvette[m]> go go gadget turboss!!!
[19:11:53] <TurBoss> requires your pro eye for a little bug
[19:11:57] <hazzy-m> PC crashed again, pretty sure the kraken is to blame ....
[19:11:58] <TurBoss> wherE?
[19:12:33] <Lcvette[m]> lol
[19:12:43] <TurBoss> hardware bug
[19:12:43] <Lcvette[m]> to young to remember inspector gadget
[19:12:44] <TurBoss> failure
[19:12:44] <Lcvette[m]> cartoon i grew up on when i was a kid
[19:12:45] <hazzy-m> TurboTax hurray!
[19:12:46] <TurBoss> ah yes
[19:12:47] <TurBoss> xD
[19:12:48] <Lcvette[m]> uh oh
[19:13:12] -!- hazzy-lab1 has joined #hazzy
[19:13:12] -!- mode/#hazzy [+o hazzy-lab1] by ChanServ
[19:13:52] -!- hazzy-lab has quit [Ping timeout: 260 seconds]
[19:13:53] hazzy-lab1 is now known as hazzy-lab
[19:15:02] <Lcvette[m]> ditch the etherpad too
[19:15:26] <TurBoss> nuke it?
[19:15:34] <Lcvette[m]> nuke it
[19:15:40] <TurBoss> why?
[19:15:52] <TurBoss> 1
[19:15:52] <TurBoss> 2
[19:15:54] <Lcvette[m]> it just bogs down matrix
[19:15:54] <TurBoss> 3
[19:15:54] <TurBoss> :P
[19:16:07] <TurBoss> sek taking note
[19:16:20] <Lcvette[m]> takes up tons of room on phone ui
[19:16:45] <hazzy-lab> wait, did I mess something up on matrix?
[19:17:04] <Lcvette[m]> no i was saying while we are nuking stuff, nuke the etherpad
[19:17:04] <hazzy-lab> I think I fat fingered the video widget ...
[19:17:13] <Lcvette[m]> that things sucks on the phone apop
[19:17:23] <TurBoss> firing
[19:17:35] <TurBoss> pum
[19:17:43] <Lcvette[m]> whoa...ooooooohhhhh ahhhhhhhh
[19:18:07] <hazzy-m> LOL, I did remove the Jitsi widget
[19:18:07] <TurBoss> :D
[19:18:07] <Lcvette[m]> holy crap the app loads like 30 times faster now\
[19:18:07] <hazzy-m> xD
[19:18:10] <hazzy-m> sorry, I did not mean to
[19:18:20] <Lcvette[m]> nuke em all
[19:18:26] <TurBoss> you added and removed
[19:18:27] <TurBoss> it
[19:18:30] <Lcvette[m]> they slow us down
[19:18:40] <TurBoss> logs
[19:18:45] <TurBoss> nuke logs
[19:18:47] <TurBoss> lol
[19:18:48] <TurBoss> :P
[19:18:57] <hazzy-m> haha
[19:18:59] <TurBoss> I din't give a look
[19:18:59] <Lcvette[m]> no need for logsd on matric
[19:19:05] <Lcvette[m]> :p
[19:19:08] <TurBoss> to the souce
[19:19:24] <Lcvette[m]> its not dumb like irc
[19:19:41] <hazzy-m> It does load faster
[19:19:48] <hazzy-m> Nice
[19:19:49] <TurBoss> Lcvette: have you piped your irc throw matrix?
[19:19:49] <Lcvette[m]> told you
[19:19:50] <Lcvette[m]> way faster
[19:19:56] <Lcvette[m]> and i can see more screen
[19:20:12] <Lcvette[m]> yup
[19:20:20] <Lcvette[m]> im hardcore hacker baby!
[19:20:21] <hazzy-m> and it looks better, it was kinda uggly that pink color
[19:20:29] <Lcvette[m]> indeed
[19:20:32] <TurBoss> hazzy: is stil [m]?
[19:20:33] <TurBoss> lol
[19:20:36] <Lcvette[m]> now its all stealth in black mode
[19:20:53] <Lcvette[m]> i guess
[19:21:07] <Lcvette[m]> i don't go on linuxcnc much anymore
[19:21:08] <Lcvette[m]> they just jobber jabber
[19:21:09] <hazzy-lab> TurBoss: it won't let me get rid of the m :(
[19:21:12] <Lcvette[m]> im tryin to get shit done
[19:21:16] <Lcvette[m]> its a distraction
[19:21:25] <TurBoss> ok np
[19:21:38] <hazzy-lab> we never jobber jabber here
[19:21:44] <hazzy-lab> no, never
[19:21:44] <TurBoss> lol
[19:21:46] <hazzy-lab> xD
[19:21:47] <Lcvette[m]> rarely
[19:21:48] <TurBoss> whats that
[19:21:54] <Lcvette[m]> its all about accomplishing things here
[19:22:18] <TurBoss> hazzy-lab: if you have some minutes...
[19:22:18] <Lcvette[m]> irc started turning in to realtime facebook
[19:22:21] <Lcvette[m]> its annoying
[19:22:30] <TurBoss> could you pleas chek the toolthing?
[19:22:32] <hazzy-lab> LOL
[19:22:35] <hazzy-lab> tes
[19:22:37] <hazzy-lab> yes!
[19:22:45] <TurBoss> thanks dad
[19:22:47] <TurBoss> :)
[19:22:48] <hazzy-lab> starting everything back up after the crash :(
[19:22:52] <hazzy-lab> hehe
[19:23:05] <Lcvette[m]> gaurantee if i switch over there right now there will be 98% jibber about nothing
[19:23:27] <TurBoss> jibirp
[19:23:30] <TurBoss> joborop
[19:23:40] <hazzy-lab> it's been quiet in linuxcnc today
[19:24:00] <hazzy-lab> jrejtjertj
[19:24:36] <Lcvette[m]> as i predicted.. jibber jabber
[19:24:54] <Lcvette[m]> harbor freight hoists and ebay jibber
[19:25:04] <TurBoss> Oo
[19:25:45] <TurBoss> crashed?
[19:25:45] <hazzy-m> haha, your right
[19:26:13] <Lcvette[m]> used to be a great place to get information on linuxcnc
[19:26:44] <Lcvette[m]> now its a retirement community discussion for monday morning quarterbaCKS
[19:27:02] <Lcvette[m]> they wonder why the brains who helps got chased off
[19:27:52] <Lcvette[m]> ok rant off
[19:30:00] <hazzy-lab> lol
[19:30:42] <TurBoss> hmmm I'm feel like Fidel Castro
[19:30:49] <TurBoss> smoking
[19:30:51] <TurBoss> :D
[19:31:08] <Lcvette[m]> turboss
[19:31:11] <hazzy-lab> xD
[19:31:13] <TurBoss> yo
[19:31:18] <Lcvette[m]> shame
[19:31:22] <Lcvette[m]> quit that habit
[19:31:27] <Lcvette[m]> vape instead
[19:31:36] <hazzy-lab> TurBoss: What part of the tootlable need help?
[19:31:43] <hazzy-lab> I can't stand vapeing
[19:31:52] <TurBoss> remove a tool
[19:31:54] <TurBoss> then save
[19:32:00] <hazzy-lab> My brother does it, so gross
[19:32:05] <hazzy-lab> ok
[19:33:18] <TurBoss> load seems ok to me
[19:33:27] <hazzy-lab> yes
[19:33:35] <hazzy-lab> but
[19:33:36] <hazzy-lab> Unrecognized line skipped: T P D Z ;
[19:33:48] <TurBoss> because of failed save
[19:34:24] <Lcvette[m]> better than smoking
[19:34:37] <TurBoss> duno
[19:35:04] <TurBoss> at least let me end this one :D
[19:35:19] <hazzy-lab> I'd rather smoke and enjoy a potentially slightly shorter life than vape :P
[19:35:45] <Lcvette[m]> easy to say at 20 when your young and bullet proof
[19:35:58] <TurBoss> I don't smoke too much
[19:36:05] <TurBoss> not a box
[19:36:07] <hazzy-lab> TurBoss: you don't smoke cigarettes, do you?
[19:36:18] <TurBoss> I quit
[19:36:23] <hazzy-lab> I though you smoked cigars
[19:36:23] <TurBoss> long ago
[19:36:34] <hazzy-lab> ok
[19:36:52] <Lcvette[m]> i smoked for 25 years
[19:36:53] <TurBoss> still same, stupid as usual
[19:37:05] <TurBoss> then I have 7 left
[19:37:20] <TurBoss> :P
[19:37:42] <Lcvette[m]> sorry 20 years
[19:37:44] <Lcvette[m]> 18-38
[19:37:56] <TurBoss> hazzy-lab: but some times.. in special ocasion I like to remember the taste lol
[19:38:32] <hazzy-lab> I have never smoked a cigarette, but I really enjoy a pipe by the fire in the winter ...
[19:39:17] <hazzy-lab> cigar sometime to, but not often
[19:39:28] <hazzy-lab> we're jibber jabbering xD
[19:39:40] <TurBoss> what was the one or the other I'm confused
[19:39:50] <TurBoss> cigarrete == just tobako?
[19:40:00] * Lcvette[m] uploaded an image: image.png (214KB) < https://matrix.org >
[19:40:18] <hazzy-lab> no, pipe and cigar are just tobacco
[19:40:24] <TurBoss> linuxcnc not running
[19:40:39] <TurBoss> ok
[19:40:39] <Lcvette[m]> status.py?
[19:40:49] <TurBoss> not sure abut that Lcvette
[19:40:50] <hazzy-lab> you need to have linux cnc running
[19:41:00] <TurBoss> ok
[19:41:13] <hazzy-lab> but that is just a warning, not a big deal
[19:41:48] <TurBoss> hazzy-lab: did you manage to found the issue?
[19:41:52] <TurBoss> :P
[19:41:58] <hazzy-lab> no
[19:42:05] <hazzy-lab> were does that error come from?
[19:42:09] <hazzy-lab> it is very strange
[19:42:15] <TurBoss> from load
[19:42:34] <TurBoss> line 118
[19:42:34] <Lcvette[m]> hey there is a hal led widget
[19:43:36] <TurBoss> yes!
[19:44:00] <hazzy-lab> it was in the beginning
[19:44:05] <hazzy-lab> first widget ever made
[19:44:11] <hazzy-lab> the atom of widgets
[19:44:12] <hazzy-lab> lol
[19:44:17] <TurBoss> hazzy-lab: I had an Idea
[19:44:26] <Lcvette[m]> its square when i put it on a button
[19:44:27] <hazzy-lab> I found the problem!
[19:44:29] <Lcvette[m]> lol
[19:44:31] <TurBoss> use python-cffi to load halcmd's
[19:44:33] <TurBoss> yes!
[19:44:40] <Lcvette[m]> hurray!
[19:44:41] <Lcvette[m]> finder
[19:44:47] <TurBoss> bravo!
[19:45:35] <hazzy-lab> T3 P3 D0.3750 Z1.2350 ;.375 ACCUPRO EM
[19:45:35] <hazzy-lab> T P D Z ;
[19:45:35] <hazzy-lab> T5 P5 D0.2010 Z2.6440 ;No. 7 TAP DRILL
[19:45:35] <hazzy-lab> T P D Z ;
[19:45:35] <hazzy-lab> T P D Z ;
[19:45:40] <hazzy-lab> el problemo
[19:45:48] <TurBoss> ya...
[19:45:54] <TurBoss> ⭕
[19:46:07] <TurBoss> save is wrong?
[19:46:09] <hazzy-lab> delete needs to remove the whole row from the table, not just the data
[19:46:19] <TurBoss> ok
[19:46:25] <TurBoss> I'll give a shot
[19:46:53] <TurBoss> also a add button shuld be needed
[19:46:58] <TurBoss> to create a row
[19:47:03] <hazzy-lab> yes
[19:47:12] <TurBoss> ok working on it
[19:47:15] <TurBoss> ty
[19:47:25] <hazzy-lab> and the table should only have as many rows as needed
[19:48:04] <TurBoss> ok
[19:48:10] <TurBoss> I'll create them from code
[19:49:53] <hazzy-lab> it might be better to use a model based table ...
[19:49:57] <hazzy-lab> not sure though
[19:50:08] <TurBoss> yes,...
[19:50:19] <TurBoss> haven't found any doc
[19:52:13] <hazzy-lab> same here
[19:52:19] <hazzy-lab> not good examples :(
[19:52:25] <hazzy-lab> n0*
[19:52:35] * hazzy-lab fails at life
[19:54:56] <TurBoss> ok working on a ui less table
[19:55:18] * Lcvette[m] uploaded an image: image.png (173KB) < https://matrix.org >
[19:55:25] <Lcvette[m]> this is the tool table?
[19:55:33] <hazzy-lab> Lcvette[m]: yes
[19:57:49] <Lcvette[m]> no add tool button?
[19:58:00] <hazzy-lab> Lcvette[m]: in the works
[19:58:10] <hazzy-lab> TurBoss: these are very good: https://github.com
[19:58:11] <Lcvette[m]> ah
[19:58:24] <TurBoss> great
[19:59:06] <hazzy-lab> maybe look at: examples/itemviews/frozencolumn/frozencolumn.py
[19:59:18] <TurBoss> https://github.com
[19:59:21] <TurBoss> this one
[19:59:49] <hazzy-lab> that too
[20:34:44] * TurBoss uploaded an image: Captura de pantalla de 2018-08-18 02-34-31.png (252KB) < https://matrix.org >
[20:46:28] <Lcvette[m]> You did it?
[20:46:34] <Lcvette[m]> Hurray?
[20:50:10] <TurBoss> still wip
[20:54:55] <Lcvette[m]> Fix the problem you were wrestling with?
[21:10:43] <hazzy-lab> nice TurBoss!
[21:10:49] * hazzy-lab checks it out
[21:11:03] <TurBoss> not using models
[21:11:07] <TurBoss> heading to
[21:11:20] <hazzy-lab> that's fine
[21:11:54] <hazzy-lab> I like add up and add down!
[21:12:23] <TurBoss> yes ty
[21:12:59] <TurBoss> once modeled more could be done
[21:13:11] <hazzy-lab> right
[21:13:53] <Lcvette[m]> What's models?
[21:15:02] <TurBoss> a table thing
[21:15:12] <TurBoss> like an matrix or array
[21:15:23] <Lcvette[m]> Ah
[21:40:11] <Lcvette[m]> Hazzy, what's the ETA on sad face launcher?
[21:54:27] <Lcvette[m]> Jeff, you on?
[21:55:25] <Lcvette[m]> Did you say you know how to make an LED?
[22:00:28] <jschi[m]> The code for led is already there. Used in HAL Led widget
[22:00:56] <jschi[m]> We should widgetize it so we could connect to state
[22:01:36] <jschi[m]> It’s in base_widget but you can’t get to it from designer as far as I know
[22:16:02] <Lcvette[m]> Oh
[22:16:27] <Lcvette[m]> So no LED?
[22:16:54] <Lcvette[m]> Or just needs to be built?
[22:18:43] <jschi[m]> Code to draw it is there. If you want to use it as code you’re good. If you want to use it from designer I could work something up tomorrow
[22:19:30] <Lcvette[m]> Yeah I would need to see it I think
[22:20:26] <jschi[m]> K I am going to rework jog increment thing tomorrow can look at led as well
[22:20:27] <jschi[m]> Where do you want to use it? Triggered by what?
[22:20:30] <Lcvette[m]> To place them properly
[22:20:41] <Lcvette[m]> Button press
[22:20:54] <Lcvette[m]> Top right corner
[22:21:02] <Lcvette[m]> Like Tormachs
[22:21:16] <jschi[m]> Toggle buttons eg selected state?
[22:21:18] <jschi[m]> Yes
[22:21:43] <Lcvette[m]> Toggle?
[22:21:49] <Lcvette[m]> Non momentary
[22:22:04] <jschi[m]> Yes. On/off
[22:22:10] <Lcvette[m]> Yup
[22:22:15] <jschi[m]> Kk
[22:23:47] <Lcvette[m]> Thinking they can all blink the blue color they turn now when pressed maybe but ”toggles" would receive the LED in there corner as an indicator
[22:24:40] <Lcvette[m]> Blue just as a pressed acknowledgement, doesn't that make sense?
[22:25:52] <jschi[m]> Yes, can make it so the led connects to different conditions on the button. Eg presses VS selected
[22:26:34] <Lcvette[m]> Sweet!
[22:26:57] <Lcvette[m]> Do I need to design and led?
[22:27:05] <Lcvette[m]> Image
[22:29:18] <jschi[m]> Drag the halled onto a design and that is what is in the library
[22:29:32] <Lcvette[m]> Ah ok
[22:29:50] <Lcvette[m]> Perfect!
[22:40:22] <Lcvette[m]> Hazzy!!!
[22:40:33] <Lcvette[m]> I see you!!!!
[22:40:48] <Lcvette[m]> Sad face
[22:48:19] <hazzy-m> Lol
[22:48:30] <Lcvette[m]> Hahaha
[22:48:47] <hazzy-m> Sad face might be a day or two
[22:49:23] <Lcvette[m]> Ok
[22:49:39] <Lcvette[m]> Skip it if it's that much of a time sick
[22:49:48] <Lcvette[m]> Suck*
[22:50:54] <Lcvette[m]> I'll pay through the yelling I'm getting faster at it and now that I know I don't have to sit it down Everytime I make a change it's not as bad
[22:51:03] <Lcvette[m]> Push*
[22:56:34] <Lcvette[m]> How about the sliders?
[22:56:57] <Lcvette[m]> Anything come to mind why they broke?
[23:01:50] <hazzy-m> They didn't break on there own :P
[23:02:02] <Lcvette[m]> They really did
[23:02:06] <hazzy-m> Did you try fixing them?
[23:02:25] <hazzy-m> By setting the override type property
[23:02:40] <Lcvette[m]> Is still set
[23:02:56] * hazzy-m uploaded an image: 20180817_225436.jpg (300KB) < https://matrix.org >
[23:03:05] <hazzy-m> Band saw blade is shot :(
[23:03:10] <hazzy-m> Lol
[23:03:18] <Lcvette[m]> Adjust the bearings
[23:03:33] <hazzy-m> They are adjusted
[23:03:47] <Lcvette[m]> Blade is Dead
[23:03:49] <Lcvette[m]> Up
[23:04:03] <hazzy-m> So the sliders all move together?
[23:04:15] <Lcvette[m]> Yeah and they say estop
[23:04:50] <Lcvette[m]> But in the property manager they are set to their respective override
[23:04:55] <hazzy-m> Ok, push and I'll look when I get but in
[23:05:07] <hazzy-m> That should be working
[23:05:15] <Lcvette[m]> Is posted
[23:05:20] <Lcvette[m]> Pushed
[23:17:13] <Lcvette[m]> What sweet part are you making?