#hazzy | Logs for 2018-08-19
Back
[00:00:09] <Lcvette[m]> so I just moved on..lol
[00:02:38] <Lcvette[m]> https://stackoverflow.com
[00:02:48] <Lcvette[m]> Maybe something here?
[00:04:22] <Lcvette[m]> nope
[00:15:58] <Lcvette[m]> http://www.qtcentre.org
[00:16:02] <Lcvette[m]> Maybe?
[00:17:31] <hazzy-lab> already using .setStretchLastSection(true)
[00:18:05] <Lcvette[m]> There's one for setting it for all contents I think below it
[00:19:05] <Lcvette[m]> Ah
[00:19:12] <Lcvette[m]> I'm thinking shrink
[00:19:14] <Lcvette[m]> Lol
[00:20:00] <Lcvette[m]> You think they would make it easier to edit a simple table
[00:20:05] <Lcvette[m]> Lol
[00:23:42] <Lcvette[m]> question, what's the add up and add down buttons?
[00:23:52] <Lcvette[m]> on the tool table
[00:26:43] <hazzy-lab> they insert a tool above or below the selected tool
[00:27:05] <hazzy-lab> but that really needs to rename the other tools ...
[00:27:09] <hazzy-lab> renumber*
[00:27:18] <hazzy-lab> so make not be good
[00:27:30] <hazzy-lab> may*
[00:28:26] <Lcvette[m]> I would think just add tool, then once saved and reread it should trust based on the sorry order of too number and pocket
[00:28:30] <Lcvette[m]> ?
[00:28:59] <Lcvette[m]> trust=sort
[00:29:05] <hazzy-lab> yes, I think that is best
[00:30:33] <Lcvette[m]> might be what the re-read button is for
[00:31:03] <Lcvette[m]> yeah I think so
[00:32:13] <Lcvette[m]> the add up add down seems like it becomes the operators terribly to sorry and order the tool list manually
[00:32:39] <Lcvette[m]> responsibility to sort
[00:32:44] <Lcvette[m]> geez
[00:33:02] <Lcvette[m]> sorry finishing a movie with the wife
[00:33:05] <Lcvette[m]> lol
[00:33:10] <Lcvette[m]> on my phone
[00:40:45] <Lcvette[m]> http://www.qtcentre.org
[00:41:08] <Lcvette[m]> Something on alignments but looks like header view?
[00:46:17] <Lcvette[m]> Maybe this?
[00:46:22] <Lcvette[m]> http://www.qtcentre.org
[00:46:28] <Lcvette[m]> But looks in Spanish
[00:46:33] <Lcvette[m]> TurBoss
[00:46:44] <TurBoss> ?
[00:47:10] <TurBoss> ah
[00:47:12] <TurBoss> sek
[00:48:04] <TurBoss> no idea
[00:50:10] <Lcvette[m]> trying to figure out how to justify the columns individually
[00:50:24] <Lcvette[m]> center for tool and pocket
[00:50:41] <Lcvette[m]> tight for the numbers and left for the comment
[00:50:50] <Lcvette[m]> right*
[00:56:51] <Lcvette[m]> Or maybe this?
[00:56:54] <Lcvette[m]> http://www.qtcentre.org
[01:14:11] <hazzy-lab> ok, new tooltable is in probe basic
[01:14:23] <hazzy-lab> I mean the styled tooltable
[01:14:33] * hazzy-lab needs to sleep
[01:14:40] <hazzy-lab> gn8
[01:17:46] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch probe_basic_1920 at Hazzy / QtPyVCP ( https://gitlab.com )
[01:19:44] <Lcvette[m]> night!
[01:24:40] <TurBoss> i will take a look tomorrow
[01:56:30] <Lcvette[m]> it appears that the diameter and z length may be wrong in the tool table
[10:07:45] <hazzy-lab> morning
[10:07:57] <hazzy-lab> maybe, I'll look at that
[10:09:29] <jschi[m]> hazzy - I have the jog increment thing cleaned up - struggling iwth one issue
[10:09:48] <jschi[m]> if I have the led on the right, it doesn't display without a resize (in designer)
[10:10:30] <jschi[m]> It must be a timing issue for the `placeLed` call but not familiar enough with qt to figure it out
[10:10:35] <jschi[m]> tried a few things
[10:10:47] <hazzy-lab> jschi[m]: Interesting, I assume that is because it is initially outside of the bounds of the button
[10:10:57] <hazzy-lab> yes
[10:11:05] <jschi[m]> very happy with the current impl - ended up exposing ledColor, diameter and alignment
[10:11:12] <jschi[m]> which work beautifully
[10:11:27] <hazzy-lab> excellent!
[10:12:03] <jschi[m]> yeah, so if the button size is reset it would be ideal to catch the resize event but ahven't found out how to do that
[10:12:52] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[10:13:18] * hazzy-lab checks out tweak_led
[10:14:27] <jschi[m]> yeah, I can push current code
[10:14:31] <jschi[m]> that was just that magic number thing
[10:14:39] <jschi[m]> give me a sec hazzy-lab
[10:14:46] <hazzy-lab> ok
[10:16:08] <jschi[m]> it's on - https://gitlab.com
[10:16:17] <jschi[m]> very close
[10:16:43] <jschi[m]> noticed the same issue on just the LedButton - which is why we're setting to upper left iso upper right as default
[10:17:06] <jschi[m]> thx for the extra eyes
[10:19:09] <TurBoss> hello!
[10:19:22] <hazzy-lab> your right, I even see it on the regular LEDButton
[10:19:26] <hazzy-lab> hey TurBoss!
[10:20:11] <jschi[m]> hey TurBoss
[10:20:12] <jschi[m]> hola
[10:21:03] <jschi[m]> am also thinking of adding an `int` property to limit number of increments to display
[10:21:11] <TurBoss> hola!
[10:21:14] <hazzy-lab> fixed it
[10:21:24] <jschi[m]> also decided to leave off the 'steps' label - one can do that outside of the jog increment
[10:21:28] <jschi[m]> WAT?
[10:21:40] <hazzy-lab> just add:
[10:21:40] <hazzy-lab> def resizeEvent(self, event):
[10:21:40] <hazzy-lab> self.placeLed()
[10:21:53] <jschi[m]> will not tell you how long I looked @ that :-)
[10:22:01] <hazzy-lab> :D
[10:22:08] <jschi[m]> kk, let me clean a few things up and I'll PR it
[10:22:12] <jschi[m]> thank you!
[10:22:18] <hazzy-lab> thank you!!
[10:23:10] <TurBoss> hazzy-lab: did you took a look at the table align thing?
[10:23:38] <hazzy-lab> no, I slept :P
[10:23:40] <hazzy-lab> I will
[10:23:49] <TurBoss> wow you rewrote the whole thing
[10:23:54] <TurBoss> 😍
[10:24:14] <hazzy-lab> no, just rearranged it a little so it looks like that :P
[10:24:40] <TurBoss> lol
[10:24:52] <TurBoss> neat looks better
[10:25:56] <hazzy-lab> great
[10:26:10] <TurBoss> hmmmm
[10:26:13] <TurBoss> you added a ;
[10:26:17] <TurBoss> very bad
[10:26:18] <TurBoss> lol
[10:26:29] <TurBoss> aiming nukes
[10:26:30] <hazzy-lab> did i? oops
[10:26:36] <hazzy-lab> lol
[10:26:54] <TurBoss> done
[10:27:19] <TurBoss> new kraken seems broken
[10:27:29] <TurBoss> can you rightclick on the active branch?
[10:27:37] <hazzy-lab> yes, it is a pain
[10:27:46] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[10:27:51] <hazzy-lab> there is a new update, maybe they fixed it
[10:27:57] <TurBoss> no
[10:29:23] * TurBoss looks at the align thing
[10:29:55] <hazzy-lab> TurBoss: I fixed the align problem
[10:30:10] <hazzy-lab> or found out how to :D
[10:30:31] <TurBoss> :O
[10:30:31] <jschi[m]> hazzy-lab: PR is up - thx - that worked a charm - I'm getting on the road soon - will check in tonight - some sample styling will finish this off
[10:30:32] <TurBoss> great
[10:30:34] <jschi[m]> w00t
[10:31:11] <hazzy-lab> sorry TurBossy, you mean the table align, I did not look at that
[10:31:20] * hazzy-lab is not awake yet
[10:31:26] <TurBoss> ok
[10:31:59] <hazzy-lab> great, jeff, have save travel
[10:32:34] <jschi[m]> kk
[10:32:47] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Jeff Schilling opened merge request #4: Jog increment widget redux at Hazzy /... ( https://gitlab.com )
[10:40:00] <TurBoss> i have a plan for the brender tool table
[10:57:23] <TurBoss> http://nullege.com for reference
[11:02:52] <TurBoss> I did it
[11:02:53] <TurBoss> again
[11:02:53] <TurBoss> :P
[11:06:54] * TurBoss uploaded an image: Captura de pantalla de 2018-08-19 17-06-43.png (210KB) < https://matrix.org >
[11:07:14] <TurBoss> hazzy-lab: I was thinking about the selected column
[11:07:26] <TurBoss> could it be used for the tool in M6?
[11:07:32] <TurBoss> aka M6 T1
[11:08:32] <TurBoss> pushing align thing
[11:09:34] <hazzy-lab> alignment looks great!!
[11:10:33] <hazzy-lab> yes, good point, unless we used the selected row instead, but I don't know how well that would work
[11:12:13] <TurBoss> hmm align moves things to top
[11:12:15] <TurBoss> didn't notice
[11:12:46] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[11:20:48] * TurBoss uploaded an image: Captura de pantalla de 2018-08-19 17-20-29.png (282KB) < https://matrix.org >
[11:22:50] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[11:26:58] <hazzy-lab> it is very strange the way gitlab merges PRs ...
[11:27:19] <TurBoss> duno what is strange?
[11:27:27] <Lcvette[m]> turboss you did it!
[11:27:33] <TurBoss> again
[11:27:36] <TurBoss> lol
[11:27:45] <Lcvette[m]> how?
[11:27:46] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[11:27:47] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[11:27:48] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson accepted merge request #4: Jog increment widget redux at Hazzy ... ( https://gitlab.com )
[11:27:49] <hazzy-lab> look at tree, it does no merge the original branch, but seems to make a new one
[11:28:18] <TurBoss> hmmmmmm
[11:28:22] <jschi[m]> might be b/c I had squash on merge clicked - I had two commits on that branch but wanted only one
[11:28:31] <jschi[m]> lazy jschi
[11:28:36] <TurBoss> smart
[11:28:38] <TurBoss> !!
[11:28:43] <hazzy-lab> oh, that could be!!!
[11:28:51] <TurBoss> Lcvette: did on widget side
[11:28:58] <jschi[m]> git rebase -i HEAD ~`n`
[11:29:07] <Lcvette[m]> i still want to know
[11:29:12] <TurBoss> sure
[11:29:18] <jschi[m]> lots o' chars for that vs [checkbox]
[11:29:31] * TurBoss sent a long message: < https://matrix.org >
[11:30:28] <hazzy-lab> neat TurBoss!'
[11:30:39] <TurBoss> ty
[11:32:46] <Lcvette[m]> turboss, i can't read spanish
[11:32:49] <Lcvette[m]> lol
[11:32:51] <TurBoss> lol
[11:32:59] <hazzy-lab> xD
[11:33:06] <hazzy-lab> that was greek :P
[11:33:07] <TurBoss> I don't see any spanish there
[11:33:07] <TurBoss> :P
[11:33:08] <TurBoss> ole ole
[11:33:13] <Lcvette[m]> sure isn't english
[11:33:33] <Lcvette[m]> lol
[11:33:33] <Lcvette[m]> great work!!
[11:33:36] <TurBoss> /rename ElTorero
[11:33:46] <hazzy-lab> lol
[11:33:49] <TurBoss> 🤣
[11:33:54] <Lcvette[m]> i was trying all kinds of things last night
[11:34:36] <TurBoss> the thing is get the cell item
[11:34:38] <TurBoss> then set the alignement to it
[11:34:38] <TurBoss> thats the trick
[11:35:05] <Lcvette[m]> ah
[11:35:56] <Lcvette[m]> diameter and Z columns are still mixed up ithink
[11:35:56] <TurBoss> sure?
[11:35:59] <TurBoss> hazzy's fault then lol
[11:35:59] <Lcvette[m]> lol
[11:37:43] <TurBoss> testib
[11:37:50] <TurBoss> testingclis
[11:43:55] <TurBoss> true is mixed
[11:46:47] <TurBoss> Thanks! Lcvette
[11:47:46] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[11:52:47] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[11:52:51] * Lcvette[m] uploaded an image: image.png (242KB) < https://matrix.org >
[11:53:02] <Lcvette[m]> is this correct?
[11:53:37] <TurBoss> yup
[11:54:23] <TurBoss> merge went smooth
[11:54:37] <TurBoss> you can just drag master and drop on probre
[11:54:43] <Lcvette[m]> how come they are all split up again?
[11:54:51] <TurBoss> ?
[11:55:36] <Lcvette[m]> your far ahead and it says master
[11:56:01] * TurBoss uploaded an image: Captura de pantalla de 2018-08-19 17-55-51.png (232KB) < https://matrix.org >
[11:56:42] * TurBoss uploaded an image: Captura de pantalla de 2018-08-19 17-56-26.png (213KB) < https://matrix.org >
[11:57:23] <TurBoss> is ok?
[11:57:30] <Lcvette[m]> mine looks different
[11:57:45] <Lcvette[m]> yes
[11:58:18] <TurBoss> have you merged master into your branch?
[11:58:25] <Lcvette[m]> i mean my kraken is different than yours
[11:58:25] <TurBoss> tryed localy
[11:58:26] <TurBoss> no conflicts
[11:58:45] <TurBoss> notice that there is no avatars in ppclone branch
[11:58:54] <TurBoss> that means that I didn't push
[11:58:54] <Lcvette[m]> i can't right click anymore
[11:59:05] <TurBoss> kraken is broken or something
[11:59:09] <Lcvette[m]> oh
[11:59:13] <TurBoss> double click on master
[11:59:15] <Lcvette[m]> i broke it?
[11:59:19] <TurBoss> no
[11:59:24] <TurBoss> double click on master
[11:59:30] <TurBoss> the drag it to your branch
[11:59:47] <Lcvette[m]> ok
[11:59:54] <TurBoss> no worries
[12:00:02] <Lcvette[m]> merge turboss/master into probe
[12:00:06] <TurBoss> worked fine?
[12:00:20] <Lcvette[m]> ah!
[12:00:22] <TurBoss> now doble click on ppppppprobe
[12:00:22] <Lcvette[m]> yes
[12:00:30] <TurBoss> :P
[12:00:37] <TurBoss> no push
[12:00:38] <TurBoss> yes
[12:00:40] <TurBoss> yet*
[12:00:46] <TurBoss> try first
[12:01:18] * Lcvette[m] uploaded an image: image.png (258KB) < https://matrix.org >
[12:01:34] <TurBoss> oh you pushed
[12:01:37] <TurBoss> no problem
[12:01:42] <Lcvette[m]> you said push
[12:01:44] <TurBoss> but try to test thing before
[12:02:14] <TurBoss> betwen some other words
[12:02:35] <TurBoss> :)
[12:02:37] <Lcvette[m]> TURBOSSSSSSS..lol
[12:02:37] <TurBoss> no problem
[12:02:38] <TurBoss> is fine
[12:02:49] <TurBoss> what what
[12:02:53] <TurBoss> i broke it?
[12:02:56] <TurBoss> :P
[12:03:30] <Lcvette[m]> Hurray!
[12:03:33] <TurBoss> yay
[12:03:34] <Lcvette[m]> its working!
[12:04:07] <Lcvette[m]> now what to do in the kraken?
[12:04:18] <TurBoss> nothing
[12:04:20] <TurBoss> its done
[12:04:30] <Lcvette[m]> i stay in probe_nbasic_1920
[12:04:36] <TurBoss> yes!
[12:04:52] <Lcvette[m]> kitty!
[12:06:57] <Lcvette[m]> what are we working on today?
[12:08:01] <Lcvette[m]> turboss is your ATC spinner in this one?
[12:08:24] <TurBoss> duno
[12:08:32] <TurBoss> it just spins
[12:08:46] <TurBoss> need to link it to the real machine
[12:08:56] <TurBoss> the params thing
[12:08:59] <TurBoss> iirc
[12:10:37] <Lcvette[m]> link it?
[12:11:12] <TurBoss> move it acording to the M6 T3
[12:13:57] <Lcvette[m]> we need a sim program?
[12:14:40] <TurBoss> I don't know... maybe hazzy has something in mind
[12:18:10] <Lcvette[m]> we have my machine we can run tests with if there is a sim needed?
[12:22:22] <TurBoss> sorry lost connection
[12:25:18] <Lcvette[m]> No worries
[12:25:29] <TurBoss> will disscuss when hazzy arround
[12:25:38] <Lcvette[m]> Ok
[12:27:47] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: TurBoss deleted project branch ToolTableWidget at Hazzy / QtPyVCP ( https://gitlab.com )
[12:27:54] <Lcvette[m]> Maybe that's easier to finish when the GUI is attached to the real machine?
[12:29:20] <TurBoss> the thing is that I don't know how to or where to move the spiner
[12:29:31] <TurBoss> from what signal
[12:29:34] <TurBoss> I mean
[12:29:45] * hazzy-m uploaded a video: Peek 2018-08-19 12-29.mp4 (128KB) < https://matrix.org >
[12:30:06] <TurBoss> uowo
[12:30:23] <TurBoss> nice!
[12:30:28] <hazzy-lab> can set the orientation now!
[12:30:39] <hazzy-lab> it was a pain to get that to work
[12:30:48] <hazzy-lab> ty
[12:31:31] <TurBoss> in whats that
[12:32:18] <TurBoss> metric powa!!!
[12:32:32] <hazzy-lab> LOL
[12:32:40] <hazzy-lab> in rules :D
[12:32:42] <TurBoss> not chickens or necks
[12:32:44] <TurBoss> :P
[12:32:52] <TurBoss> hahahaha
[12:33:07] <hazzy-lab> haha
[12:33:54] <TurBoss> we have ff
[12:33:57] <TurBoss> futbol fields
[12:33:58] <TurBoss> you have inchs
[12:33:59] <TurBoss> and american tanks
[12:34:07] <TurBoss> lol
[12:34:08] <TurBoss> ok enough
[12:34:23] <hazzy-lab> xD
[12:34:46] <TurBoss> sorry can't stop laughing
[12:34:48] <TurBoss> :P
[12:35:16] <TurBoss> futbol field is very common here
[12:35:23] <TurBoss> also olimpic pools
[12:38:10] <Lcvette[m]> We have soccer fields here too
[12:39:26] <Lcvette[m]> Probably 1 or 2 in every municipality
[12:39:56] <TurBoss> but as unit system?
[12:40:00] <TurBoss> :P
[12:40:38] <TurBoss> hazzy-lab: time to merge probe_basic into master?
[12:40:48] <TurBoss> Lcvette: could continue its branch
[12:41:12] <TurBoss> the one in master is very old
[12:41:39] <hazzy-lab> TurBoss: Yes, that is a good idea
[12:41:53] <hazzy-lab> Should I do it?
[12:42:03] <TurBoss> if you wan't sure
[12:42:06] <hazzy-lab> ok
[12:42:07] <hazzy-lab> sek
[12:42:23] <hazzy-lab> done
[12:42:27] <hazzy-lab> :D
[12:42:47] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[12:42:48] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch probe_basic_1920 at Hazzy / QtPyVCP ( https://gitlab.com )
[12:43:59] <TurBoss> much breakage?
[12:44:11] <hazzy-lab> no, none at all!
[12:44:16] <hazzy-lab> I thought there would be some
[12:44:45] <TurBoss> mini works fine
[12:44:47] <TurBoss> :D
[12:46:18] <TurBoss> ok
[12:46:22] * TurBoss takes a break
[12:47:16] <hazzy-lab> mini always works! I live it, and it fits on a >tiny< screen
[12:47:17] <hazzy-lab> xD
[12:47:18] <hazzy-lab> ok
[12:47:48] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[12:58:42] <Lcvette[m]> whats mini?
[12:59:26] * hazzy-m uploaded an image: Screenshot_2018-08-19_12-59-18.png (4KB) < https://matrix.org >
[12:59:30] <hazzy-m> LOL
[12:59:39] <hazzy-m> It is an empty VCP for testing
[12:59:49] <TurBoss> fully working
[12:59:51] <Lcvette[m]> oh i don't know it
[12:59:58] <TurBoss> 0 bugs
[12:59:59] <Lcvette[m]> what i miss?
[13:00:09] <TurBoss> latter
[13:00:14] <hazzy-m> cu
[13:00:29] <Lcvette[m]> by turboss!
[13:00:31] <Lcvette[m]> get some rest
[13:00:40] <hazzy-lab> Lcvette[m]: Merged probe basic into master
[13:00:49] <hazzy-lab> that's about it
[13:00:58] <Lcvette[m]> you did it?
[13:01:01] <hazzy-lab> yes
[13:01:08] <Lcvette[m]> that is big yes?
[13:01:17] <hazzy-lab> YES!!
[13:01:18] <hazzy-lab> lol
[13:01:28] <Lcvette[m]> Hurray!
[13:01:33] <hazzy-lab> *YES*
[13:01:36] <Lcvette[m]> what do i need to do?
[13:01:39] <hazzy-lab> there :D
[13:02:15] <hazzy-lab> have you added the jog inc widget yet?
[13:02:22] <hazzy-lab> that is probably nect
[13:02:24] <hazzy-lab> next
[13:02:37] * Lcvette[m] uploaded an image: image.png (260KB) < https://matrix.org >
[13:03:34] <Lcvette[m]> here is where i am
[13:05:29] <hazzy-lab> double click on the probe basic with the hazzy logo to check it out
[13:05:33] <hazzy-lab> reset local
[13:05:53] <Lcvette[m]> done
[13:08:17] <Lcvette[m]> hello
[13:09:15] * Lcvette[m] uploaded an image: image.png (245KB) < https://matrix.org >
[13:09:30] <hazzy-lab> looks good
[13:09:59] <Lcvette[m]> so i work in this one from now on?
[13:11:00] <hazzy-lab> yes, but nothing will have changed for you
[13:11:18] <hazzy-lab> you should be on the same branch you have always been on
[13:11:19] <Lcvette[m]> ok
[13:11:24] <hazzy-lab> (probe_basic_1920)
[13:12:12] <Lcvette[m]> on local thats what it says
[13:12:43] <Lcvette[m]> i wasn't sure if i needed to catch mine up to yours
[13:12:58] <Lcvette[m]> or if i just work in yours or master or what
[13:13:00] <Lcvette[m]> im very confused still
[13:23:11] <hazzy-lab> just work on probe_basci_1920 like you have been doing
[13:23:44] <hazzy-lab> nothing changed, I just updated the probe_basic in master to match yours, so it would not be so far behind
[13:24:01] <Lcvette[m]> ok
[13:24:33] <Lcvette[m]> it wouold be nice to get s=to participate in the updates with you guys
[13:24:47] <Lcvette[m]> i didn't get to see much before
[13:25:35] <Lcvette[m]> it maybe could have helped along the way during some of the build process of the table
[13:25:41] <Lcvette[m]> from needing a reqork
[13:25:43] <Lcvette[m]> reqwork etc
[13:25:58] <Lcvette[m]> rework***..keyboard fails me
[13:27:10] <hazzy-lab> all I did was merge probe_basic into master
[13:27:24] <hazzy-lab> you could have easily done it
[13:27:54] <hazzy-lab> just drag probe basic flag into the master flag in the kraken
[13:29:45] <Lcvette[m]> oh yeah i totally get it, before it was a different animal completely
[13:30:13] <Lcvette[m]> so now to be on the same synched up level i just drg mine into yours?
[13:33:32] <Lcvette[m]> ok... i'll deal with it tomorrow
[13:33:48] <Lcvette[m]> im off to take a day
[13:33:55] <Lcvette[m]> get away from it
[13:34:05] <hazzy-lab> yes, or more likely you will drag master into yours
[13:34:11] <hazzy-lab> sounds good!
[13:34:15] <hazzy-lab> have fun!
[13:34:26] <Lcvette[m]> thanks!
[13:45:21] <Lcvette[m]> I'm on mobile
[13:45:37] <Lcvette[m]> xD
[13:45:51] <hazzy-lab> haha
[13:45:57] <hazzy-lab> you can't get away
[14:19:38] <Lcvette[m]> I know...lol
[14:25:33] <Lcvette[m]> TurBoss and I were discussing the ATC and he said it needed input to finish it, is that something I can help with?
[14:26:01] <Lcvette[m]> Since I set up the ATC on my machine with the remap
[14:27:09] <grijalvap[m]> hi
[14:27:49] <grijalvap[m]> finally have kraken installed
[14:27:54] <grijalvap[m]> where sould i clone
[14:27:54] <Lcvette[m]> Hi
[14:28:18] <Lcvette[m]> Better to ask hazzy
[14:28:43] <grijalvap[m]> should I clone to /home/user ?
[14:28:44] <Lcvette[m]> hazzy-lab: still on?
[14:29:27] <Lcvette[m]> TurBoss
[14:30:04] <TurBoss> any place is fine
[14:30:28] <TurBoss> inside home user xD
[14:30:50] <Lcvette[m]> Sold he make same as ours?
[14:30:56] <Lcvette[m]> Should*
[14:31:42] <TurBoss> he means where to download the codw
[14:31:55] <grijalvap[m]> yes
[14:31:58] <hazzy-lab> grijalvap[m]: Hey!
[14:32:20] <hazzy-lab> yes, where ever you like, I use /home/user/dev
[14:32:33] <grijalvap[m]> perfect
[14:47:52] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed to project branch master at Hazzy / QtPyVCP ( https://gitlab.com )
[14:58:36] <grijalvap[m]> I can't see the ropo in kraken I have connected and generated the ssh key
[14:58:41] <grijalvap[m]> any clue
[14:59:25] <grijalvap[m]> I go to open project ->clone gitlab
[14:59:38] <grijalvap[m]> but dont see any repo
[15:07:43] <Lcvette[m]> Hmmmm
[15:07:54] <Lcvette[m]> I forget
[15:08:07] <Lcvette[m]> Been a while since TurBoss walked me through it
[15:08:22] <Lcvette[m]> I remember I had to select them
[15:08:40] <Lcvette[m]> Can you screen shot what your looking at?
[15:08:45] <grijalvap[m]> I created a new project and it is the only project I can see
[15:10:15] * Lcvette[m] uploaded an image: image.png (245KB) < https://matrix.org >
[15:10:25] <Lcvette[m]> You don't see like this?
[15:12:50] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: pedro opened issue #1: ok wait a second at Hazzy / QtPyVCP ( https://gitlab.com )
[15:12:50] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: pedro closed issue #1: ok wait a second at Hazzy / QtPyVCP ( https://gitlab.com )
[15:15:38] <TurBoss> im back
[15:15:57] <Lcvette[m]> Hurray!
[15:15:58] <TurBoss> whats the issue?
[15:15:58] <Lcvette[m]> Pedro is having some difficulties
[15:16:11] <TurBoss> oh
[15:16:18] <TurBoss> i only have some minutes
[15:16:18] <Lcvette[m]> And I can't remember the steps to enter the kraken
[15:16:19] <TurBoss> :)
[15:16:48] <Lcvette[m]> grijalvap: still here?
[15:16:51] <TurBoss> project clone
[15:16:53] <Lcvette[m]> You have a small window
[15:17:02] <grijalvap[m]> yes
[15:17:04] <TurBoss> enter ymthe url there and select an empy directory
[15:17:09] <TurBoss> the*
[15:17:21] <grijalvap[m]> i did
[15:17:53] <grijalvap[m]> just wait a minutes i'm installing riot on the linux machine
[15:18:08] <grijalvap[m]> so i can send screens to you
[15:18:54] <Lcvette[m]> Better to take advantage of turboss's time
[15:19:10] <Lcvette[m]> I know little
[15:19:10] <grijalvap[m]> ok
[15:20:14] <grijalvap[m]> do I need to init the rep or someting like that ?
[15:20:33] <TurBoss> nobo
[15:20:38] <TurBoss> nono**
[15:20:39] <grijalvap[m]> firt of all is clone the correct operation to get the code?
[15:20:45] <TurBoss> yes
[15:21:01] <grijalvap[m]> good
[15:21:06] <TurBoss> esay peasy
[15:21:27] <grijalvap[m]> bien podemos hacer esto en español?
[15:21:33] <TurBoss> si
[15:21:35] <TurBoss> xD
[15:21:49] <grijalvap[m]> selecione clone y luego gitlab
[15:22:07] <grijalvap[m]> me aperece una pantalla que dice where to clone to
[15:22:11] <TurBoss> hay una opcion que es url
[15:22:26] <TurBoss> en vez de gitlab
[15:22:44] <grijalvap[m]> no la siguiente opcion es repository to clone
[15:22:50] <grijalvap[m]> ah correcto
[15:23:10] <TurBoss> ahi introduces la url del repositorio
[15:23:21] <grijalvap[m]> enterado
[15:23:40] <TurBoss> https://gitlab.com
[15:24:40] <grijalvap[m]> bien parece que funciono.. genial!!
[15:25:01] <TurBoss> hurra
[15:25:05] <TurBoss> voy a cenar
[15:25:18] <grijalvap[m]> provecho!!
[15:25:18] <Lcvette[m]> Hurray?
[15:25:30] <grijalvap[m]> thanks I will continue
[15:25:36] <Lcvette[m]> Hurray!
[15:26:41] <Lcvette[m]> Mui bueno!
[15:27:18] <Lcvette[m]> Muy bueno!
[15:34:00] <hazzy-lab> Hurray!
[15:34:51] <hazzy-lab> and I get to practicar me espaniol ademas
[15:34:52] <hazzy-lab> lol
[15:35:06] <grijalvap[m]> muy bien
[15:35:11] <Lcvette[m]> Lol
[15:35:25] <grijalvap[m]> ls
[15:35:52] <grijalvap[m]> good to practice a diferen languaje
[15:36:09] <grijalvap[m]> my first one is español
[15:36:09] <Lcvette[m]> Mine had long since left me... High school Spanish was 24 years ago
[15:36:37] <hazzy-lab> si, es muy importancia conocer otros linguas
[15:37:18] <grijalvap[m]> ls
[15:38:24] <grijalvap[m]> I have 2 keboards here and is confusing I will install riot in the linux machine so I can work with one machine only
[15:38:42] <Lcvette[m]> Lol..I have two also
[15:38:50] <Lcvette[m]> I know your confusion
[15:38:51] <hazzy-lab> sounds good, Lcvette[m] also has row keyboards, lol
[15:39:05] <Lcvette[m]> Be careful
[15:39:48] <Lcvette[m]> It's not hard to delete work on one screen on accident... Not that I have done something so silly....lol
[15:40:05] <hazzy-lab> xD
[15:40:42] <Lcvette[m]> Lcvette shamefully denies that incident
[15:40:46] <Lcvette[m]> Lol
[15:40:58] <hazzy-lab> haha
[15:43:59] <Lcvette[m]> hazzy-lab: what can I help with on the ATC prob?
[15:44:16] <Lcvette[m]> Portion
[15:44:35] <hazzy-lab> Am I not sure, I need to look at it
[15:44:43] <hazzy-lab> I am*
[15:44:56] <hazzy-lab> man, I can't type, and I can't blame it on the keyboard, lol
[15:44:59] <Lcvette[m]> Turboss said it needed input for further work testing etc
[15:45:09] <hazzy-lab> Yes
[15:45:27] <hazzy-lab> somehow it needs to know what the toolchanger is doing
[15:45:36] <hazzy-lab> but it is not easy to get that info
[15:46:31] <Lcvette[m]> I can help with how mine works
[15:47:17] <Lcvette[m]> Probably fairly common
[15:47:29] <Lcvette[m]> For carousel type
[15:47:39] <hazzy-lab> yes, that would be good
[15:47:47] <hazzy-lab> I need to look thru your config
[15:48:00] <Lcvette[m]> All inputs and outputs
[15:50:29] * Lcvette[m] posted a file: XK7130 Main Schematic 7i76 7i77 6-13-18.pdf (81KB) < https://matrix.org >
[15:50:39] <Lcvette[m]> perhaps that will help?
[16:02:51] -RSSBot[turbosssp:#hazzy- Hazzy activity posted a new article: Kurt Jacobson pushed new project branch VKB at Hazzy / QtPyVCP ( https://gitlab.com )
[16:08:25] <Lcvette[m]> z
[16:08:25] <Lcvette[m]> e
[16:12:17] * Lcvette[m] posted a file: XK7130 Main Schematic ATC 7i76 7i77.pdf (74KB) < https://matrix.org >
[16:12:33] <Lcvette[m]> cleaned it up so only the ATC connections are showing
[16:12:59] <Lcvette[m]> inputs are dark blue and outputs are cyan
[16:15:57] <hazzy-lab> Lcvette[m] thank you!
[16:16:15] <hazzy-lab> that is very helpful
[16:20:37] <Lcvette[m]> thought it may help, it certainly helped me when laying everything out for wiring and doing the config and setting up the remaps
[16:35:01] <TurBoss> wow thoose schematics look very good
[16:35:14] <Lcvette[m]> thanks turboss
[16:41:33] <TurBoss> no I know atc-wiring-fu
[16:41:42] <TurBoss> hehe
[16:41:49] <TurBoss> now**
[16:41:52] <Lcvette[m]> Sweet!!
[16:42:19] <TurBoss> still readin
[16:42:33] <TurBoss> do you have an audiobook?
[16:44:32] <Lcvette[m]> What audio book?
[16:52:24] <TurBoss> schematic audiobook
[16:52:31] <TurBoss> nah joke
[16:52:33] <Lcvette[m]> Lol
[16:53:10] <TurBoss> there are amazing toolchangers over the youtube
[16:53:16] <TurBoss> i saw yours
[16:53:28] <TurBoss> checking again
[16:54:27] <Lcvette[m]> Just tell me what you need and I can provide
[16:54:56] <TurBoss> hmmm
[16:55:25] <TurBoss> if i know what i let you know
[16:55:42] <TurBoss> i'm on mobile now
[16:56:22] <TurBoss> a special remap
[16:56:51] <TurBoss> i have your cfg here somewhere
[16:57:32] <TurBoss> maybe add hak pins to the atc widget
[16:57:36] <TurBoss> hal
[16:57:40] <TurBoss> **
[16:58:18] <TurBoss> so you can manipulate the atc gui the way you do in the remap
[16:58:36] <TurBoss> extra thing on the remap
[16:58:38] <Lcvette[m]> Ok
[16:59:38] <TurBoss> finally an atc is too much machine specific
[17:00:02] <TurBoss> we can ask for some money for the integration service
[17:00:03] <TurBoss> :P
[17:00:52] <TurBoss> i inegrate ppc in your machine for a modical price lol
[17:03:47] <TurBoss> HtL systems
[17:08:35] <TurBoss> nah needs to be easy
[17:09:02] <TurBoss> add some halpins and slots to the widget
[17:16:56] <Lcvette[m]> Not following
[17:18:18] <Lcvette[m]> It needs money?
[17:18:47] <hazzy-lab> TurBoss: LOL
[17:19:11] <TurBoss> hahaha
[17:19:12] <TurBoss> no
[17:19:13] <hazzy-lab> that is a way to make money, change per ATC!
[17:19:16] <hazzy-lab> xD
[17:20:03] <TurBoss> hazzy-lab: do you like the idea of have some pins on the atc widget and some slots?¿
[17:20:20] <hazzy-lab> yes, I think that might be best
[17:20:27] <TurBoss> ok
[17:20:36] <TurBoss> at least for now
[17:20:36] <Lcvette[m]> For coins?
[17:20:41] <hazzy-lab> lol
[17:20:51] <TurBoss> a coin dispenser :D
[17:20:51] <Lcvette[m]> Pay per too change?
[17:20:53] <Lcvette[m]> Slots?
[17:20:59] <TurBoss> python things
[17:20:59] <Lcvette[m]> Lol
[17:21:03] <Lcvette[m]> I know
[17:21:06] <TurBoss> D
[17:21:08] <TurBoss> :)
[17:21:23] <Lcvette[m]> Bitcoin
[17:21:32] <TurBoss> atcoin
[17:21:35] <hazzy-lab> xD
[17:23:09] <TurBoss> hazzy-lab: I found how to set upstream without the rightclik on kraken
[17:23:12] <TurBoss> just drag origin master to your repo master
[17:23:18] <TurBoss> the select push
[17:23:31] <TurBoss> *then
[18:03:47] <Lcvette[m]> So what do I need to make them?
[18:05:21] <Lcvette[m]> I await marching orders!
[18:06:26] <TurBoss> I'm working on it
[18:06:32] <TurBoss> basics atm
[18:06:32] <Lcvette[m]> Oh ok
[18:06:48] <TurBoss> get things rotate again etc...
[18:06:54] <TurBoss> :P
[18:06:57] <Lcvette[m]> Nice!
[18:07:18] <Lcvette[m]> :)
[18:31:46] <TurBoss> hmmmm got something
[18:32:01] * TurBoss uploaded a video: Peek 20-08-2018 00-31.webm (3250KB) < https://matrix.org >
[18:33:18] <Lcvette[m]> You did it!!!
[18:33:26] <TurBoss> yes!
[18:33:30] <TurBoss> hal comps in UI
[18:33:39] <Lcvette[m]> Nice!!
[18:34:17] <TurBoss> hehe
[18:34:34] <Lcvette[m]> Is wiggling
[18:34:46] <TurBoss> managed by hal pins
[18:35:06] <TurBoss> thats new
[18:35:14] <TurBoss> at least for me
[18:35:19] <Lcvette[m]> Nice!!!
[18:36:10] <Lcvette[m]> So it moves based on the tool number or pocket number?
[18:36:51] <TurBoss> no
[18:37:04] <TurBoss> it moves when something from linuxcnc writes to the hal pin atc_widget.tool
[18:37:07] <TurBoss> like a remapo
[18:37:27] <TurBoss> or some hal wiring
[18:37:35] <TurBoss> hmmmm
[18:37:36] <TurBoss> idea
[18:37:52] <TurBoss> secret
[18:37:55] <Lcvette[m]> Lol
[18:37:59] <Lcvette[m]> You're on a roll
[18:38:10] <Lcvette[m]> Shhhhi won't tell
[18:38:38] <TurBoss> and the oposite would be posible
[18:38:46] <TurBoss> click on a tool and issue the m6
[18:39:00] <TurBoss> isn't amazing
[18:39:10] <Lcvette[m]> That's an amazing!!
[18:39:23] <TurBoss> thats not the idea
[18:39:26] <TurBoss> the idea is how
[18:39:29] <TurBoss> heheheheheh
[18:41:50] <Lcvette[m]> How?
[18:46:46] <hazzy-dev> TurBoss: Whoa!! Nice!
[18:47:15] <hazzy-dev> I have never made a HAL comp in python
[18:47:24] <hazzy-dev> that is great
[18:47:58] <Lcvette[m]> I know right awesomesauce!
[18:48:11] <TurBoss> hazzy-dev: i saw the connect function
[18:48:29] <TurBoss> hal.connect(pin, signal)
[18:48:32] <TurBoss> from python
[18:49:33] <TurBoss> would be great to connect the signals the atc uses
[18:49:34] <TurBoss> instead of add pins to the widget
[18:49:38] <TurBoss> +pins - signals
[18:50:08] <Lcvette[m]> This is a whole new thing?
[18:50:15] <TurBoss> more new
[18:50:32] <Lcvette[m]> New possibilities
[18:50:46] <TurBoss> but I don't know how connect works
[18:50:47] <TurBoss> :P
[18:54:46] <TurBoss> hal.connect("pinname","signal_name")
[19:13:23] <TurBoss> I'm getting the error
[19:13:33] <TurBoss> this signal is allready linked to another
[19:14:38] <TurBoss> hazzy-dev: you arround?
[19:18:54] <TurBoss> https://github.com
[19:30:02] <jschi[m]> Not near a computer but IIRC you can mux the signal
[20:07:35] <TurBoss> ohhhhh
[20:07:41] <TurBoss> thanks
[20:17:46] <TurBoss> but mux requires to modify the hal files
[20:17:51] <TurBoss> hmmmmm
[20:39:16] <jschi[m]> Yeah, not sure if the expectation. Wonder if you can create a mux in code
[21:14:28] <hazzy-lab> TurBoss: You should be able to connect a signal multiple times, but not a pin
[21:15:49] <hazzy-lab> the python HAL component has some limitations, for example, I don't think you can connect to pins on other components, those must be connected in the post GUI hal file
[21:18:27] <Lcvette[m]> I remember reading about that but I didn't understand it at the time