#hazzy | Logs for 2018-11-18
Back
[00:00:03] <turbologs> ah was me
[00:00:04] <turbologs> lol
[00:02:10] <Not-5695> [02QtPyVCP] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://gitlab.com/Hazzy/qtpyvcp/compare/c5f8b4b10fc24bf7c49d9d382106d95988cecf83...5e90fbed8cbc2e0a8f34b1a38b77946b84a854a9
[00:02:11] <Not-5695> [02QtPyVCP] 07TurBoss 035e90fbe - add matrix badge
[00:02:12] <TurBoss> pushed
[00:06:54] <JoseLuisGitter[m> test
[00:07:06] <TurBoss> ti
[00:07:09] <JoseLuisGitter[m> cles
[00:09:50] <Not-5695> [02QtPyVCP] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://gitlab.com/Hazzy/qtpyvcp/compare/5e90fbed8cbc2e0a8f34b1a38b77946b84a854a9...d9102bba3068064c82be633e6d647c837dfdcfb1
[00:09:52] <Not-5695> [02QtPyVCP] 07TurBoss 03d9102bb - add gitter badge too
[00:15:10] <TurBoss> good?
[00:15:32] <TurBoss> bridged gitter again was broken
[00:15:49] <hazzy-m> fantastic!
[00:16:02] <hazzy-m> I just tested it
[00:16:21] <TurBoss> I got toons of msgs
[00:16:38] <KurtJacobsonGitt> test
[00:16:52] <KurtJacobsonGitt> nice!
[00:16:54] <TurBoss> tost
[00:17:32] <TurBoss> hazzy: did you manage to set the rip interpreter under pycharm?
[00:17:44] <hazzy-m> no :(
[00:17:50] <TurBoss> sek
[00:17:51] <hazzy-m> I can't get anything to run
[00:18:09] <TurBoss> you cant run qtpyvcp prom pycharm
[00:18:47] <hazzy-m> I should be able to launch LCNC from pycharm, no?
[00:19:10] <TurBoss> no
[00:19:19] <TurBoss> or yes
[00:19:31] <TurBoss> havent tried
[00:19:38] <hazzy-m> ok, that's fine
[00:19:49] <hazzy-m> I can use the terminal at the bottom
[00:20:04] <hazzy-m> that is plenty good enough
[00:20:32] * TurBoss uploaded a video: Peek 18-11-2018 06-19.webm (1723KB) < https://matrix.org >
[00:21:16] <hazzy-m> oh!!!
[00:21:20] <hazzy-m> thank you!
[00:21:43] <TurBoss> :)
[00:22:15] <TurBoss> https://github.com
[00:22:30] <TurBoss> I think is this one
[00:23:13] <TurBoss> if you use build bot version is not needed as its installed to python2 site-packages or so
[00:24:10] <TurBoss> if you can import linuxcnc without errors, you should be able to debug your code when linuxcnc is runing.
[00:25:08] <TurBoss> I mean does import linuxcnc show a red underline?
[00:25:58] <hazzy-m> no, but only because I have linuxcnc 2.7 installed
[00:26:14] <hazzy-m> it imports 2.7 instead if the rip 2.8
[00:26:24] <TurBoss> no 27 here
[00:26:24] <hazzy-m> now it should worl
[00:26:31] <hazzy-m> work*
[00:26:34] <TurBoss> ah
[00:26:36] <TurBoss> you not me
[00:26:36] <TurBoss> :D
[00:26:49] <TurBoss> to run main .py right click and run main
[00:26:53] <TurBoss> on the file
[00:27:13] <hazzy-m> hurray!
[00:27:15] * hazzy-m uploaded an image: image.png (35KB) < https://matrix.org >
[00:27:21] <hazzy-m> ok
[00:27:23] <TurBoss> wowowow
[00:28:34] * hazzy-m uploaded an image: image.png (40KB) < https://matrix.org >
[00:28:38] <hazzy-m> not much help
[00:28:39] <hazzy-m> :D
[00:28:57] <hazzy-m> but it works!
[00:29:05] <TurBoss> click on the button before the green arrow in top right
[00:29:10] <TurBoss> edit this
[00:29:26] <TurBoss> hmmm
[00:29:37] <TurBoss> what tool do you use for screenshots?
[00:29:53] <TurBoss> LinuxCNC must be running to launch a VCP
[00:29:55] <hazzy-m> the XFCE built in one
[00:29:58] <TurBoss> oh
[00:30:59] * TurBoss uploaded an image: image.png (47KB) < https://matrix.org >
[00:33:02] * TurBoss sent a long message: < https://matrix.org >
[00:33:07] <TurBoss> thats all
[00:34:16] <hazzy-m> hurray!
[00:34:19] <hazzy-m> it works!
[00:34:37] <TurBoss> you can also add a app to be launched before script
[00:34:54] <TurBoss> I need a headless linuxcnc
[00:35:10] <hazzy-m> you can make a headless CNC
[00:35:14] <TurBoss> how
[00:35:18] <TurBoss> you toldme one
[00:35:20] <TurBoss> once*
[00:35:26] <hazzy-m> just set the display to:
[00:35:37] <hazzy-m> shoot, I can't remember
[00:35:38] <hazzy-m> lol
[00:35:41] <TurBoss> pang
[00:35:55] <hazzy-m> I think it is something like linuxcncssh
[00:36:47] <hazzy-m> then it wll run with out a GUI
[00:37:06] <TurBoss> not found
[00:37:28] <hazzy-m> oh, also this:
[00:37:33] <hazzy-m> ```Yes, we run linuxcnc without a gui often in the automated tests. In
[00:37:34] <hazzy-m> your .ini file, set [DISPLAY]DISPLAY to a python program that does the
[00:37:35] <hazzy-m> controlling that you want. See tests/toolchanger/m61 for an example.```
[00:37:38] <hazzy-m> Yes, we run linuxcnc without a gui often in the automated tests. In
[00:37:39] <hazzy-m> your .ini file, set [DISPLAY]DISPLAY to a python program that does the
[00:37:40] <hazzy-m> controlling that you want. See tests/toolchanger/m61 for an example.
[00:38:04] <hazzy-m> I guess it could be an empty pythion file
[00:38:38] <TurBoss> false works
[00:38:58] <hazzy-m> great
[00:40:22] <TurBoss> hmm no
[00:40:26] <TurBoss> needs a loop
[00:40:35] <TurBoss> a while True: pass
[00:40:36] <hazzy-m> it goes back to axis it seems
[00:40:46] <hazzy-m> oh, good idea
[00:44:10] <hazzy-m> this will really speed up debugging
[00:44:36] <hazzy-m> ok, I better sleep
[00:44:51] <TurBoss> iok
[00:44:51] <hazzy-m> lots to do tomorrow
[00:44:53] <TurBoss> me too
[00:45:04] <hazzy-m> is it morning yet?
[00:45:08] <hazzy-m> almost
[00:45:12] <TurBoss> not sun yet
[00:45:12] <hazzy-m> lol
[00:45:13] <hazzy-m> ok
[00:45:14] <hazzy-m> gn8
[00:45:21] <TurBoss> if doesn't rain I'll go hunt in 1 hour
[00:45:24] <TurBoss> :D
[00:45:24] <TurBoss> lol
[00:45:28] <hazzy-m> haha
[00:45:33] <TurBoss> n8
[00:45:35] <hazzy-m> thanks for the help setting up pycharm
[00:45:43] <TurBoss> thanks for trying
[00:45:49] <TurBoss> I told you not only once
[00:45:49] <TurBoss> :P
[00:45:59] <TurBoss> hahahha
[00:46:00] <TurBoss> bye
[00:46:03] <hazzy-m> I think it will be very good
[00:46:03] <hazzy-m> cu
[00:51:45] <Lcvette> What happened?
[00:52:11] <Lcvette> Did we loose the history?
[10:40:38] <hazzy-m> morning
[10:40:50] <hazzy-m> Lcvette: It seems fine here
[11:45:04] -!- Roguish has joined #hazzy
[19:06:52] * hazzy-m sent a long message: < https://matrix.org >
[19:07:01] <hazzy-m> ^ This is fantastic!
[19:08:00] <hazzy-m> Also, i did not know pocket numbers could be duplicated in the tool table
[19:08:06] <hazzy-m> but they can be!
[19:08:35] <hazzy-m> which is great if you have a large tool collection
[19:08:51] <hazzy-m> ex: if you have a 20x changer, and use t1-20 for one part, and t21-41 for another part
[19:08:52] <hazzy-m> and just swap all of them between runs
[19:08:53] <hazzy-m> without setting them up again
[19:08:55] <hazzy-m> per rene
[19:09:02] <hazzy-m> that is awesome!
[19:09:20] <hazzy-m> Maybe that was alywas the case, but I didn't know it
[19:26:00] <Roguish_desk> hazzy-m: you there?
[19:28:40] <Roguish_desk> many weeks ago, I could get my test setup to run with the new GUI, but no longer. just lots of errors.
[20:52:38] <Lcvette> whatcha got there Hazzy?
[20:53:00] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]
[22:42:35] <hazzy-m> Roguish_desk: That is not surprising, a LOT of things have changed
[22:45:15] <hazzy-m> all you should need to do is run `sudo pip install -e .` from from the qtpyvcp directory
[22:46:17] <hazzy-m> there is a QuickStart here if you don't intend to do any dev work: https://qtpyvcp.kcjengr.com
[22:47:18] <hazzy-m> or you can look at the installing from source section here, which should be most similare to what you have now: https://qtpyvcp.kcjengr.com