#hazzy | Logs for 2018-11-20
Back
[09:14:33] -!- JT-Mobile has quit [Quit: Leaving]
[10:57:52] <hazzy-m> morning
[10:58:53] <hazzy-m> ugh, lots of typos
[10:59:04] <hazzy-m> TurBoss: Thanks for fixing those!
[10:59:31] <hazzy-m> the docs are build by travis from the github repo, i'll push them there
[11:02:42] <Not-5695> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±1] 13https://gitlab.com/Hazzy/qtpyvcp/compare/a5a63ac83e72b24d616431d2d85dfeb3add60a17...14d06f29a08c82f164f2fa7e81c4228ae41192ea
[11:02:44] <Not-5695> [02QtPyVCP] 07Kurt Jacobson 0314d06f2 - fix more typos
[11:04:09] <TurBoss> Ty
[11:04:09] <TurBoss> Hello
[11:18:38] <hazzy-m> I made gitlab push to github to keep the repos in sync
[11:58:52] * Lcvette uploaded an image: image.png (414KB) < https://matrix.org >
[11:59:46] * Lcvette uploaded an image: image.png (266KB) < https://matrix.org >
[12:01:03] <hazzy-m> man that is a good looking GUI
[12:43:12] <Lcvette> lol
[12:44:17] <Lcvette> i know.. any chance those machine status labels and the spindle override slider colors are an easy fix?
[12:45:15] <Lcvette> oh sand the spindle and feed rates in the lower right that say not set?
[12:45:36] <hazzy-m> yes. those are easy
[12:45:39] <Lcvette> just for presentation purposes?
[12:45:56] <hazzy-m> you mean the spindle load?
[12:46:03] <Lcvette> i wanted to put together a screen library
[12:46:23] <Lcvette> but i didn't capyture the screens before they changed from your modifications
[12:47:29] <Lcvette> so what i have currently is alot of older versions missing the atest layout
[12:47:41] <Lcvette> so it is a tad confusing looking to go screen by screen
[12:48:26] * Lcvette uploaded an image: image.png (3KB) < https://matrix.org >
[12:48:47] <hazzy-m> sure, I'll see what I can fix in the next few minutes
[12:48:52] * Lcvette uploaded an image: image.png (9KB) < https://matrix.org >
[12:49:19] * Lcvette uploaded an image: image.png (19KB) < https://matrix.org >
[12:51:07] <Not-5695> [02QtPyVCP] 07Kurt Jacobson deleted branch 03FPMDeb
[12:51:44] <Not-5695> [02QtPyVCP] 07Kurt Jacobson pushed 037 commits to 03master [+2/-0/±7] 13https://gitlab.com/Hazzy/qtpyvcp/compare/14d06f29a08c82f164f2fa7e81c4228ae41192ea...2bbc27b11cce122928d926c76c62046707718316
[12:51:46] <Not-5695> [02QtPyVCP] 07Kurt Jacobson 03e0a3695 - try deploy
[12:51:47] <Not-5695> [02QtPyVCP] 07Kurt Jacobson 03ae27ae2 - change build_deb.sh call
[12:51:49] <Not-5695> [02QtPyVCP] 07Kurt Jacobson 034e67d4e - add build script
[12:51:50] <Not-5695> [02QtPyVCP] ... and 4 more commits.
[12:52:39] <hazzy-m> debian packages are now automagicaly built by travis
[12:52:40] * Lcvette uploaded an image: OIS_2018-11-20_12-51-24.png (16KB) < https://matrix.org >
[12:52:41] * Lcvette uploaded an image: OIS_2018-11-20_12-51-33.png (23KB) < https://matrix.org >
[12:52:41] * Lcvette uploaded an image: OIS_2018-11-20_12-50-54.png (44KB) < https://matrix.org >
[12:52:52] <Not-5695> [02QtPyVCP] 07Kurt Jacobson deleted branch 03FPMDeb
[12:53:00] <Lcvette> i know you don't look at this version of the gui
[12:53:06] <Lcvette> this is what it ooked like before
[12:54:41] <Lcvette> i had to do some DOS fu last night
[12:54:43] <hazzy-m> I do look at it, I just don't use I for dev so I don't break it so much :)
[12:54:44] <Lcvette> :O
[12:58:08] <Lcvette> had to make a boot disk for the little 8088 system on the Rhino lathe
[12:58:23] <Lcvette> but can't do it on a windows machine
[12:58:29] <Lcvette> cause they don't run real dos
[12:58:48] <Lcvette> so i had to dig into how to get real dos and boot into it
[12:58:58] <Lcvette> then build the boot disk
[12:59:08] <Lcvette> and format it to 720k
[12:59:23] <Lcvette> it was a learning experience
[12:59:30] <Lcvette> and in the end....
[12:59:41] <Lcvette> turns out the floppy drive in the rhino is bad
[13:00:00] <Lcvette> :(
[13:00:06] <Lcvette> and its old school
[13:00:07] <Lcvette> edge connector type
[13:01:23] <Not-5695> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±1] 13https://gitlab.com/Hazzy/qtpyvcp/compare/2bbc27b11cce122928d926c76c62046707718316...c8fba15da848c7a294444eb55d089a81cbc037ea
[13:01:24] <Not-5695> [02QtPyVCP] 07Kurt Jacobson 03c8fba15 - VCP: Fix ProbeBasic active codes display
[13:07:31] <Not-5695> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±1] 13https://gitlab.com/Hazzy/qtpyvcp/compare/c8fba15da848c7a294444eb55d089a81cbc037ea...562e1679272310a60f4efb5e4fc44006f9263561
[13:07:32] <Not-5695> [02QtPyVCP] 07Kurt Jacobson 03562e167 - VCP: fix ProbeBasic spindle and speed units and values
[13:17:13] * hazzy-m uploaded an image: image.png (22KB) < https://matrix.org >
[13:17:58] <Not-5695> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±1] 13https://gitlab.com/Hazzy/qtpyvcp/compare/562e1679272310a60f4efb5e4fc44006f9263561...e8ef8573d40e05e96b7becea0589ceef5f15d520
[13:18:00] <Not-5695> [02QtPyVCP] 07Kurt Jacobson 03e8ef857 - VCP: re-fu ProbeBasic spindle load meter colors
[13:18:17] <hazzy-m> Lcvette: anything else?
[13:18:57] <Lcvette> you did it?
[13:19:35] <hazzy-m> I think I fixed everything
[13:20:17] * Lcvette uploaded an image: image.png (155KB) < https://matrix.org >
[13:20:31] <Lcvette> mine still looks same after i reset local to here
[13:23:27] <Lcvette> did i do it wrong again?
[13:23:27] <Lcvette> hazzy
[13:23:28] <Lcvette> ?
[13:23:48] <hazzy-m> what does the kraken look like
[13:24:09] * Lcvette uploaded an image: image.png (239KB) < https://matrix.org >
[13:24:33] <hazzy-m> looks good
[13:24:42] <Lcvette> i just double clicked and set local to here
[13:25:03] <hazzy-m> oh, you installed from deb
[13:25:03] <hazzy-m> LOL
[13:25:15] <hazzy-m> so your not running from your git checkout
[13:25:31] <hazzy-m> sudo apt remove python-qtpyvcp
[13:25:32] <Lcvette> i dunno
[13:25:38] <Lcvette> i do what you say
[13:25:48] <Lcvette> lol
[13:26:04] <hazzy-m> that is probably a bad idea
[13:26:06] <hazzy-m> :D
[13:26:11] <Lcvette> never
[13:26:14] <Lcvette> lol
[13:26:17] <hazzy-m> hahaha
[13:26:37] <hazzy-m> did you sudo apt remove?
[13:26:50] <Lcvette> don ya think i did that?
[13:26:56] <Lcvette> really?
[13:27:06] <Lcvette> do
[13:27:12] <Lcvette> me?
[13:27:16] <Lcvette> the fuless wonder
[13:28:08] <Lcvette> in what world what i think to sudo apt remove anything
[13:28:21] <Lcvette> and what would i sudo apt remove?
[13:28:48] <hazzy-m> `sudo apt remove python-qtpyvcp`
[13:29:32] * Lcvette sent a long message: < https://matrix.org >
[13:30:03] <Lcvette> and then..
[13:30:08] <hazzy-m> excellent
[13:30:24] <hazzy-m> then from in your qtpyvcp-master folder run:
[13:30:36] <hazzy-m> `sudo pip install -e .`
[13:31:23] * Lcvette sent a long message: < https://matrix.org >
[13:32:21] <hazzy-m> `sudo mkdir /usr/local/lib/python2.7/dist-packages/`
[13:32:25] <hazzy-m> and then run the pip command again
[13:33:08] * Lcvette sent a long message: < https://matrix.org >
[13:33:47] <hazzy-m> great
[13:33:56] <hazzy-m> now try running probe basic again
[13:34:01] <hazzy-m> you should have the changes
[13:34:43] * Lcvette uploaded an image: image.png (181KB) < https://matrix.org >
[13:34:52] <Lcvette> still busted
[13:35:22] <hazzy-m> run
[13:35:34] <Lcvette> how fast
[13:35:37] <hazzy-m> `pip unintall qtpyvcp`
[13:35:44] <hazzy-m> LOL
[13:36:01] <hazzy-m> you must have multiple versions of QtOyVCP installed
[13:36:02] <Lcvette> anywhere?
[13:36:07] <hazzy-m> yes
[13:36:09] <Lcvette> or specific folder?
[13:36:37] <hazzy-m> wherever your heart leads you to run it
[13:36:39] <hazzy-m> lol
[13:37:28] * Lcvette sent a long message: < https://matrix.org >
[13:37:56] <hazzy-m> now you should be good
[13:38:03] <hazzy-m> run linuxcnc again
[13:38:09] <hazzy-m> it HAS to work this time
[13:38:55] <Lcvette> HURRAY!!!!!
[13:38:58] <Lcvette> ok
[13:39:04] <hazzy-m> hurray!!!!!!
[13:39:14] <Lcvette> so seriously.. is that something you think i would have known to do?
[13:39:21] <Lcvette> me?
[13:39:34] <Lcvette> lol
[13:39:50] <Lcvette> but HURRAY!!! you did it!!!
[13:39:54] <Lcvette> :D
[13:39:59] <Lcvette> boogie time!!!
[13:40:01] <hazzy-m> no, I gave you the command, but you missed it
[13:40:03] <hazzy-m> lol
[13:40:03] <Lcvette> that was fast
[13:40:18] <Lcvette> you did?
[13:40:21] <Lcvette> when?
[13:40:41] * hazzy-m sent a long message: < https://matrix.org >
[13:40:46] <hazzy-m> :P
[13:41:26] <Lcvette> hahaha
[13:41:35] <Lcvette> i thought you meant sometime in the past on my own
[13:41:39] <Lcvette> by natural thought
[13:41:52] <hazzy-m> Ok, I better run, 12 canucks arriving soon
[13:41:57] <hazzy-m> and my back is busted :(
[13:42:01] <Lcvette> as if i were watching tv and said to myself.. i should go sudo apt uninstal some stuff
[13:42:06] <Lcvette> lol
[13:42:08] <hazzy-m> I can't even get up the stairs :(
[13:42:13] <Lcvette> oh man
[13:42:18] <Lcvette> lower?
[13:42:23] <hazzy-m> yeah
[13:42:33] <Lcvette> i feel your pain
[13:42:38] <Lcvette> stretch
[13:42:47] <Lcvette> and a good chiropractor
[13:42:58] <hazzy-m> I feel and look like a 95yr old
[13:42:58] <hazzy-m> lol
[13:42:59] <Lcvette> will have you walking normal today
[13:43:24] <Lcvette> most likely a pinched nerve
[13:43:34] <hazzy-m> I think so
[13:43:35] <Lcvette> happens to me too
[13:43:43] <Lcvette> they can resolve it quickly
[13:43:47] <Lcvette> save you the pain\
[13:43:54] <Lcvette> cause pain meds won't work
[13:43:55] <hazzy-m> was scraping and paining a ceiling yester day ...
[13:44:13] <Lcvette> twisting motions?
[13:44:22] <hazzy-m> yep
[13:44:25] <Lcvette> at the lower truck while reaching?
[13:44:32] <Lcvette> yes pinched nerve
[13:44:37] <Lcvette> go to chiroprator
[13:45:00] <hazzy-m> I sould
[13:45:00] <Lcvette> he can relax the lower discs and release it
[13:45:19] <Lcvette> if you don't it could last for a week or more and become arecurring problem
[13:45:32] <Lcvette> longer it remains in there
[13:46:32] <Lcvette> a good chiro will use hot stones or salt bags, with electro therapy to nrelax the area then adjust and stretch the area to release the nerve and you will walk out upright and normal
[13:46:52] <Lcvette> pain free
[13:47:02] <Lcvette> probably cost around $50-75
[13:47:28] <Lcvette> most will make an opening for a locked up back on short notice
[13:47:45] <Lcvette> first time this has happened?
[13:47:59] <Lcvette> if so.. its not something that goes away over night withoutn treatment
[13:48:12] <Lcvette> my first time was after flooring install at age 23
[13:48:40] <Lcvette> i would get locked in positions of severe crippling pain
[13:48:58] <Lcvette> liuved with it for 4 days before my father forced me to a chiro
[13:49:15] <Lcvette> since then when it happens i go immediately and voila
[13:49:21] <Lcvette> only time i go
[13:58:33] <Lcvette> i forgot how to open designer in temrinal
[13:59:03] <Lcvette> when you fixed the status you fix on one tab but not the other..lol
[13:59:28] <Lcvette> i did it on both the spare tab and the jog tab so it would remain visible all the time
[13:59:53] <Lcvette> figured i would copy your work over but i cannot remember the way to open designer sadface way
[14:16:09] <hazzy-m> from the qypyvcp-master folder run:
[14:16:18] <hazzy-m> `launch_designer.sh`
[14:16:23] <hazzy-m> that should do it
[14:17:34] * Lcvette uploaded an image: image.png (36KB) < https://matrix.org >
[14:17:52] <hazzy-m> oops
[14:17:55] <hazzy-m> `./launch_designer.sh`
[14:18:58] <Lcvette> now what do i open to get bprobe basic?
[14:24:54] <Lcvette> figured it out
[14:24:58] <Lcvette> :D
[14:25:03] <Lcvette> and fixed the status
[14:25:13] <Lcvette> copied yours over to the other tab and it worked!
[14:25:25] <Lcvette> should i push to kraken?
[14:25:27] <Lcvette> or no?
[14:25:36] <hazzy-m> sure!
[14:25:48] <hazzy-m> did you play witht he rules editor?
[14:26:25] <hazzy-m> double click on the status label and it should pop up
[14:26:47] <Lcvette> i don't have acces to push
[14:26:52] <Lcvette> im locked out
[14:26:59] <Lcvette> the grown ups don't trust me
[14:27:04] <Lcvette> lol
[14:27:08] <Lcvette> no
[14:30:39] <hazzy-m> haha
[14:30:56] <hazzy-m> ok, push to your repo and I will merge your changes to master
[14:31:17] * Lcvette uploaded an image: image.png (282KB) < https://matrix.org >
[14:32:00] * Lcvette uploaded an image: image.png (212KB) < https://matrix.org >
[14:32:24] * Lcvette uploaded an image: image.png (384KB) < https://matrix.org >
[14:36:09] * Lcvette uploaded an image: image.png (266KB) < https://matrix.org >
[14:36:38] * Lcvette uploaded an image: image.png (275KB) < https://matrix.org >
[14:37:03] * Lcvette uploaded an image: image.png (431KB) < https://matrix.org >
[14:37:24] * Lcvette uploaded an image: image.png (423KB) < https://matrix.org >
[14:37:43] * Lcvette uploaded an image: image.png (371KB) < https://matrix.org >
[14:38:07] * Lcvette uploaded an image: image.png (370KB) < https://matrix.org >
[14:38:29] * Lcvette uploaded an image: image.png (332KB) < https://matrix.org >
[14:38:43] * Lcvette uploaded an image: image.png (332KB) < https://matrix.org >
[14:39:04] * Lcvette uploaded an image: image.png (365KB) < https://matrix.org >
[14:39:49] * Lcvette uploaded an image: image.png (312KB) < https://matrix.org >
[14:40:11] * Lcvette uploaded an image: image.png (397KB) < https://matrix.org >
[14:50:17] <hazzy-m> did you push your changes?
[15:43:45] <Not-5695> [02QtPyVCP] 07Kurt Jacobson created branch 03work_coords
[15:48:03] <Not-5695> [02QtPyVCP] 07Kurt Jacobson pushed 035 commits to 03master [+0/-0/±12] 13https://gitlab.com/Hazzy/qtpyvcp/compare/e8ef8573d40e05e96b7becea0589ceef5f15d520...12d744322f91a4a7aa33e416ce60f4fe4ab649aa
[15:48:04] <Not-5695> [02QtPyVCP] 07TurBoss 0301025ce - ActionButton -> MDIButton
[15:48:06] <Not-5695> [02QtPyVCP] 07Kurt Jacobson 03ab9b8ad - Allow no-op rules
[15:48:07] <Not-5695> [02QtPyVCP] 07Kurt Jacobson 0354ca47b - MDIButton: enable substituting data chan values into MDI command
[15:48:09] <Not-5695> [02QtPyVCP] ... and 2 more commits.
[15:48:21] <hazzy-m> Hurray!
[15:48:31] <TurBoss> ???
[15:48:38] <TurBoss> I'll read latter
[15:49:30] <hazzy-m> TurBoss: I made it so you can substitute values from the data chanels into the MDI command string
[15:49:36] <hazzy-m> not very good, but it works
[15:49:43] <TurBoss> fantastuic!
[16:27:40] <Lcvette> hey hazzy, no
[16:27:43] <Lcvette> sorry
[16:27:53] <Lcvette> i can do now
[16:28:21] <Lcvette> hazzy
[16:28:38] <Lcvette> you do old computer salvage?
[16:28:47] <Lcvette> i am looking for something
[16:33:08] <hazzy-m> yeah, what do you need?
[16:33:27] * Lcvette uploaded an image: IMG_20181120_032507089.jpg (4364KB) < https://matrix.org >
[16:33:52] <Lcvette> 3.5" floppy drives
[16:34:06] <Lcvette> has a funny connector
[16:34:20] <hazzy-m> let me check
[16:34:27] <Lcvette> the board it connects to has a 34 pin connector though
[16:34:29] <hazzy-m> might have one right here
[16:35:36] <Lcvette> but the 3.5 floppy drive i had in an old 2005 puter has some of the pin holes blocked off so im guessing i should not use newer drives on the older board maybe?
[16:35:40] <Lcvette> yeah?
[16:40:01] <hazzy-m> shoot, I can't get the damn boxes down
[16:40:08] <Lcvette> no worries
[16:40:10] <hazzy-m> there is a server from about 95
[16:40:13] <Lcvette> don't hurt yoursel;f
[16:40:16] <hazzy-m> should have what you need
[16:54:39] <Lcvette> i just upgraded the kraken by myself
[16:55:03] <Lcvette> :O
[16:55:05] <hazzy-m> your becoming dangerous
[16:55:05] <hazzy-m> lol
[16:55:30] <Lcvette> sudo apt-get install ./(file name)
[16:55:45] <hazzy-m> yep!
[16:55:50] <hazzy-m> did you remember?
[16:55:50] <Lcvette> but now im not sure how to upload my changes in the kraken
[16:55:54] <Lcvette> i did
[16:56:00] <Lcvette> somehow
[16:56:08] <Lcvette> csan't believe it
[16:56:40] <hazzy-m> all you should need to do is commit your changes and push
[16:57:12] <hazzy-m> push to your gitlab repo
[16:58:16] <Lcvette> i don't know how to push to my one?
[17:00:02] * Lcvette uploaded an image: image.png (231KB) < https://matrix.org >
[17:13:12] <hazzy-m> right click on the master tag, select Set Upstream and choose Lcvette
[17:13:18] <hazzy-m> then you should be able to push
[17:15:50] * Lcvette uploaded an image: image.png (231KB) < https://matrix.org >
[17:16:00] <Lcvette> i did it?
[17:16:18] <hazzy-m> perfect!
[17:16:26] <Lcvette> hurray!
[17:16:58] <Lcvette> NOW YOU CAN MERGE ME BACK IN?
[17:17:26] <hazzy-m> yes, I'll merge you into the main master branch
[17:17:45] * hazzy-m uploaded an image: image.png (45KB) < https://matrix.org >
[17:18:01] <hazzy-m> I'm making progress on the offsets
[17:18:06] <Lcvette> you did it?
[17:18:08] <hazzy-m> they all work now
[17:18:14] <Lcvette> yes!!!
[17:18:17] <hazzy-m> but some of the nombers don't seem right
[17:18:26] <Lcvette> they probably arent
[17:18:40] <Lcvette> probably are wrong boxes
[17:18:43] <Lcvette> ?
[17:18:52] <hazzy-m> I also added all the tool offsets, not just length
[17:18:53] <Lcvette> maybe i copied boxes from other places?
[17:19:09] <hazzy-m> they are not used very often, but might as well show them
[17:19:16] <Lcvette> yeah
[17:19:21] <hazzy-m> They are all new boxes
[17:19:31] <Lcvette> nice!
[17:38:40] <hazzy-m> hey all the images are showing up in sad designer
[17:38:47] * hazzy-m uploaded an image: image.png (433KB) < https://matrix.org >
[17:39:21] <hazzy-m> Lcvette: does that work for you too now?
[17:42:39] <Lcvette> one sec
[17:42:44] <Lcvette> lemme check
[17:44:15] <hazzy-m> 22 conflicts when I try to merge your changes :(
[17:44:24] <hazzy-m> what did you change?
[17:46:34] <Lcvette> i copied the status from the tab to the other tab for gcode and mcode
[17:46:40] <Lcvette> thats all
[17:46:47] <hazzy-m> ok, great
[17:46:53] <hazzy-m> I'll just redo that
[17:46:59] <hazzy-m> its not worth merging
[17:47:03] <Lcvette> ok
[17:47:20] <hazzy-m> the .ui files don't play well with git :(
[17:48:03] <Lcvette> i don't know what that means
[17:48:42] <hazzy-m> git can't tell what was changed in each file, so it makes a mess
[17:49:02] <hazzy-m> it showed almost the whole file changed
[17:49:14] <hazzy-m> but you realy just changed a few things
[17:49:22] <Lcvette> maybe because i clicked on buttons?
[17:49:48] <hazzy-m> maybe, but it should not be that sensitive
[17:49:54] <hazzy-m> certainly not your fault
[17:50:15] <Lcvette> or maybe it was the number of codes it copied over in the status columns?
[17:50:49] <Lcvette> or it doesnt work like that?
[17:50:57] <hazzy-m> I think QtDesginer rearanges the UI file depending on what was changed
[17:53:09] <Lcvette> getting closer on finishing things?
[17:53:26] <Lcvette> seems like it
[17:53:38] <Lcvette> one bite at a time
[17:54:13] <TurBoss> sounds scary
[17:54:59] <hazzy-m> LOL
[17:55:21] <hazzy-m> yes, slowly but surely
[17:55:44] <hazzy-m> After the wedding I'll have much more time
[17:55:56] <hazzy-m> its this Saturday
[17:56:17] <hazzy-m> Lots of people already here for it, so its kinda distracting
[17:57:36] <TurBoss> are you gona marri?
[17:57:52] <hazzy-m> my twin sister
[17:57:59] <TurBoss> Ohhhh
[17:58:04] <TurBoss> congratzzz
[17:58:09] <TurBoss> to she
[17:58:23] <TurBoss> etc..
[17:58:27] <TurBoss> :P
[17:59:39] <hazzy-m> she says thank you!
[17:59:39] <hazzy-m> :D
[18:00:06] <TurBoss> 😋
[20:39:53] <TurBoss> hey just readed the logs
[20:40:04] <TurBoss> amazing works coords work? I'm testing
[20:54:47] <TurBoss> Testing ProbeBasic life a operator
[20:54:59] <TurBoss> 😄
[20:57:24] <TurBoss> hmmm I'll make a vid
[21:01:11] * TurBoss uploaded a video: Peek 21-11-2018 02-59.webm (4611KB) < https://matrix.org >
[21:02:36] <TurBoss> gn8
[21:42:51] <hazzy-m> TurBoss: That is not recent master
[21:42:57] <hazzy-m> the LoadMeter colors and Machine Status labels should be working now
[21:43:10] <hazzy-m> maybeyou are running off the deb install?
[21:44:40] <TurBoss> Yes could be that
[21:44:41] <hazzy-m> what, you should be asleep :P
[21:44:52] <TurBoss> :)
[21:45:03] <TurBoss> I have to wake early