#hazzy | Logs for 2018-12-17
Back
[00:06:55] <Lcvette> any success?
[00:14:23] <Lcvette> hazzy must be in the zone
[00:17:28] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±2] 13https://gitlab.com/Hazzy/qtpyvcp/compare/5f88b089228a644fc9094d9ddd6fbe0381253fbc...4322047c28f96e3487975158d7612e426079933f
[00:17:30] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson 034322047 - PB: fix jog slider so it sets percentage
[00:17:42] <Lcvette> you did it?
[00:17:46] <Lcvette> hurray?
[00:17:54] <hazzy-m> yes
[00:17:56] <Lcvette> HURRAY!!
[00:18:01] <hazzy-m> the slider works no
[00:18:02] <hazzy-m> w
[00:18:10] <Lcvette> outstanding!!
[00:18:20] <hazzy-m> but the slider value read out does not work quite right
[00:18:49] <hazzy-m> but I have to add signals to make that work right so i'll have to put that off for nwo
[00:19:24] <hazzy-m> TurBoss: Did the QtPy patch work?
[00:19:32] <TurBoss> yup
[00:19:37] <hazzy-m> great!
[00:19:57] <hazzy-m> I'll see about adding any tests and open a PR
[00:20:57] * hazzy-m has to get up at 6:30
[00:20:59] <hazzy-m> gn8
[00:21:56] <Lcvette> night hazzy!
[00:21:59] <Lcvette> great job!
[00:29:16] <TurBoss> night
[06:09:12] <jthornton> morning
[08:26:53] <hazzy-m> Morning
[08:57:53] <TurBoss> morning
[09:03:28] <jthornton> just did a fresh debian 9 and the quick start and got "Can't execute DISPLAY program qtpyvcp" I'll mess with it again tomorrow
[09:04:24] <TurBoss> you need to export path
[09:04:24] <TurBoss> sek
[09:04:29] <hazzy-m> did you log out and back in?
[09:04:45] <TurBoss> export PATH=$PATH:~/.local/bin/
[09:04:47] <hazzy-m> you have to do that for the path to be set
[09:04:55] <TurBoss> for every shell session
[09:04:55] <hazzy-m> or what turboss says
[09:06:43] <TurBoss> extracted from here https://qtpyvcp.kcjengr.com
[09:06:55] <TurBoss> docs are cool!
[09:06:59] <hazzy-m> if you can't run `qtpyvcp -h`sucsesfully in a terminal then LinuxCNC wond be able to run it either
[09:07:03] <TurBoss> have you figured the deb install?
[09:07:10] <TurBoss> hazzy:?
[09:07:23] <TurBoss> the missing deps
[09:08:03] <hazzy-m> the debs need to include some of the python packages, since some arn't available as debian pakages, it shoud be possible but I have not messed with it
[09:08:17] <TurBoss> ok no problem
[09:08:22] <TurBoss> great
[09:08:29] <jthornton> no, I forgot to restart
[09:08:43] <TurBoss> great!
[09:08:51] <hazzy-m> ou don't have to restart, jut log out
[09:09:17] <jthornton> it's easier to just restart, I have autologin configured
[09:09:26] <jthornton> it's the first thing I do lol
[09:09:57] <jthornton> do you know if there is a guide for building a live cd like the linuxcnc one?
[09:10:03] <hazzy-m> is should have installed an .xsessionrc file to auto add the path when x starts
[09:10:23] <TurBoss> once did some yocto recipes
[09:10:34] <TurBoss> to build a distro
[09:10:59] <TurBoss> but got stuck on readline 5.2 gpl2 and python 2 missing
[09:11:08] <jthornton> sorry for the false alarm... it works after a restart :)
[09:11:14] <TurBoss> not sure how could be now
[09:11:31] <hazzy-m> jthornton: Hurray!
[09:11:43] <hazzy-m> thanks for testing
[09:12:10] <TurBoss> hazzy: so many tecnologies coded in gtk2 -> gtk3 -> qt
[09:12:11] <TurBoss> lol
[09:12:12] <jthornton> no problem
[09:12:43] <hazzy-m> TurBoss: I know, everybody is going to Qt
[09:13:04] <hazzy-m> there needs to be a Qt version of XFCE, KDE is too fancy
[09:13:06] <hazzy-m> lol
[09:13:20] <jthornton> shower time for me
[09:13:36] <TurBoss> doesn't exist?
[09:13:41] <jthornton> brender does look a lot better than the debian 9 desktop lol
[09:14:12] <hazzy-m> TurBoss: It does !
[09:14:17] <hazzy-m> LXQt
[09:14:20] <hazzy-m> I'll have to try it
[09:14:21] <TurBoss> just reaf
[09:14:26] <TurBoss> readed
[09:14:50] <TurBoss> could be a good choice for the embedded distro
[09:14:56] <TurBoss> taking note
[09:15:01] <hazzy-m> yes
[09:15:58] <TurBoss> hazzy: what you working on?
[09:16:04] <TurBoss> GL backplot?
[09:16:06] <TurBoss> :P
[09:16:38] <hazzy-m> No, not programing today, its my Bday, taking a break and going to the maintains
[09:16:50] <hazzy-m> Backplot needs work
[09:16:53] <TurBoss> sound good
[09:17:22] <TurBoss> change work offset does some bad things on backplot
[09:18:39] <Lcvette> Happy Birthday to you Happy Birthday to you Happy Birthday dear Hazzy, Happy Birthday to you!
[09:18:41] <Lcvette> :D
[09:19:03] <TurBoss> oh BDay meands that lol
[09:19:05] <TurBoss> :P
[09:19:07] <Lcvette> morning
[09:19:53] <Lcvette> how old are you hazzy
[09:20:23] <hazzy-m> Thanks! a quarter century today :O
[09:21:05] <TurBoss> you getting old :P
[09:22:36] * Lcvette uploaded an image: 177815 (1372KB) < https://matrix.org >
[09:24:12] <Lcvette> Congrats! That was elder status in earlier civilizations
[09:24:43] <hazzy-m> Off to the maintains!
[09:24:45] <hazzy-m> see you all!
[09:25:02] <Lcvette> Enjoy and have a great birthday
[09:25:13] <TurBoss> ciao
[09:25:38] <Lcvette> Turboss
[09:25:43] <TurBoss> yes?
[09:26:00] <Lcvette> What's your offset button code look like?
[09:26:18] <Lcvette> Had to fix in pb
[09:26:18] <TurBoss> the one from the dialog ?
[09:26:25] <Lcvette> May wasn't too copy
[09:26:28] <TurBoss> or the one that shows the dialog
[09:26:29] <Lcvette> Want
[09:26:53] <TurBoss> 1000€
[09:26:56] <TurBoss> :P
[09:27:33] <Lcvette> You are having the same issues we had in parts you not?
[09:27:38] <Lcvette> Pb
[09:28:27] <TurBoss> what issues?
[09:28:45] <Lcvette> the code for the offset command weas bad
[09:29:03] <Lcvette> in the button
[09:29:03] <TurBoss> mine works fine
[09:29:35] <TurBoss> but the path is not corretly updated in the new place
[09:30:04] <Lcvette> thats becauise of the button code
[09:30:17] <Lcvette> we had the same problem
[09:30:28] <TurBoss> the origin is moved and if you run the program goes correctly
[09:30:37] <TurBoss> i think is a backplot issue
[09:30:39] <TurBoss> sek
[09:30:42] <Lcvette> no
[09:30:45] <TurBoss> I'll take a vid
[09:30:50] <Lcvette> i saw
[09:31:03] <Lcvette> pb works correctly now
[09:31:16] <TurBoss> oh
[09:31:21] <TurBoss> then I should update my button
[09:31:26] <Lcvette> yes
[09:32:40] * Lcvette uploaded an image: image.png (35KB) < https://matrix.org >
[09:32:54] <Lcvette> G10 L20 P{ch[0]} X0.0
[09:33:44] <Lcvette> old was L2 and made issues
[09:33:51] <Lcvette> L20 is the correct
[09:34:03] <TurBoss> oh its a typo
[09:34:05] <Lcvette> for the zero buttons
[09:36:38] <Lcvette> fixed it?
[09:38:05] <TurBoss> offset_mdi = "G10 L20 {} {}{}".format(system, axis, coords)
[09:38:08] <TurBoss> this is mine
[09:39:06] <TurBoss> is diferent sistem
[09:39:18] <Lcvette> you not using the rules?
[09:39:22] <TurBoss> you used a mdi button
[09:39:42] <TurBoss> I made a little dialog
[09:39:42] <TurBoss> sek
[09:40:05] <Lcvette> its doing the same thing now?
[09:40:17] * TurBoss uploaded an image: image.png (267KB) < https://matrix.org >
[09:40:50] <TurBoss> similar
[09:41:09] <Lcvette> test the backplot
[09:41:23] <Lcvette> try setting the coordinate system using the mdi
[09:41:40] <Lcvette> G10 L20 P1 X0.0000
[09:41:40] <TurBoss> I need to add a mdi lol
[09:41:53] <Lcvette> oh
[09:41:59] <Lcvette> :p
[09:51:58] <TurBoss> it does the same
[09:52:05] <TurBoss> path is not updated
[09:52:10] <TurBoss> I'll try pb
[09:53:07] <Lcvette> yeah try pb see if it duplicates your issue
[09:57:04] <TurBoss> the same
[09:57:10] <TurBoss> ok I have some work
[09:57:22] <TurBoss> I'll be arround in some hours
[09:58:20] -!- Roguish has joined #hazzy
[10:01:54] <hazzy-m> Yeah, it's a backplot issue, I tried to fix it this morning but ran out of time
[14:04:07] <TurBoss> ok just finished
[15:04:19] <Lcvette> i just finished
[15:04:48] <Lcvette> weekend orders have been shipped out to customer
[15:04:58] <Lcvette> now just need to make sure i did not miss mail pickup
[15:05:21] <Lcvette> if i don't see the flag on the box down at 4:10pm i will have to run to the post office
[16:54:24] <hazzy-m> Lcvette: Did you miss him?
[16:59:49] <Lcvette> not sure, flag was still up at 4:10, so i took it to the post office
[17:00:16] <Lcvette> but who knows with the holiday hours the mail carriers are working, its possible they had not gotten by here yet
[17:00:36] <Lcvette> but the package needed to be on the truck to the raleigh terminal by 4:45
[17:01:03] <Lcvette> post office closes here at 4:30
[17:34:44] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±2] 13https://gitlab.com/Hazzy/qtpyvcp/compare/4322047c28f96e3487975158d7612e426079933f...5571c214a8d2566049f8d588490806b159d48efa
[17:34:45] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson 035571c21 - hacky QTimer fix for QBackPlot update after offsets changed
[19:03:40] <Lcvette> hurray!
[19:03:51] <Lcvette> but you are supposed to be enjoying your birthday!
[19:04:13] <hazzy-m> That was just driving me crazy
[19:04:14] <hazzy-m> Lol
[19:04:21] <Lcvette> hahahaha
[19:04:26] <hazzy-m> Had to fix it so I could relax
[19:04:43] <Lcvette> chillax Bday buddy
[20:09:35] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]