#hazzy | Logs for 2018-12-23
Back
[06:03:05] <jthornton> morning
[10:33:49] <Lcvette> morning
[10:34:38] <jthornton> I think I'll watch Grumpy Old Men tonight
[10:34:48] <Lcvette> good call
[10:34:59] <Lcvette> those moview are amongst my favorites
[10:35:06] <Lcvette> movies
[10:39:56] <jthornton> have you seen My Cousin Vinny?
[10:42:31] <Lcvette> i think i own my cousin vinnie on vhs, and dvd
[10:42:33] <Lcvette> lol
[10:42:38] <Lcvette> LOVE that movie
[10:43:12] <Lcvette> Welcome to Mooseport?
[10:43:35] <jthornton> I've not seen that one
[10:43:57] <Lcvette> if you like comedies, its a pretty good one
[10:44:36] <jthornton> I'll have to look for that one
[10:45:35] <Lcvette> Ray Ramano and Gene Hackman
[10:46:33] <Lcvette> hazzy: https://git.shieldx.sh
[10:46:54] <Lcvette> looks like they are defining characters here maybe?
[11:06:48] <hazzy-m> That is very similar to how I made the one for hazzy
[11:07:33] <Lcvette> nice
[11:07:39] <Lcvette> im just steady hgunting
[11:07:50] <Lcvette> hunting for things that look like they may be solutions
[11:09:38] <Lcvette> morning
[11:09:40] <Lcvette> :D
[11:10:06] <Lcvette> is the one for hazzy not good?
[11:13:28] <Lcvette> https://www.kdab.com
[11:14:55] <hazzy-m> morning!
[11:15:03] <hazzy-m> That dbus one looks interesting
[11:15:04] <Lcvette> :D
[11:15:46] <Lcvette> thats what i thought
[11:15:54] * hazzy-m is going to work on the vkb for a bit
[11:16:21] <Lcvette> hurray
[11:16:53] <hazzy-m> hmm, I see your vertical layout branch, did all you change is the UI file?
[11:17:22] <hazzy-m> and qss
[11:18:18] <Lcvette> ptrtty much
[11:18:31] <Lcvette> it was not so bad to rearrange
[11:18:45] <Lcvette> i did cgange alot of things from layouts to qwidgets
[11:19:03] <Lcvette> i found the qwidget to be a little more flexible in its formatting
[11:19:03] <hazzy-m> what about having a command line option choose which layout?
[11:19:09] <hazzy-m> or an INI option
[11:19:55] <Lcvette> i was choosing it from the "choose file" option in the vcp launcher window
[11:20:35] <hazzy-m> and the QSS file loaded properly?
[11:21:06] <Lcvette> yup
[11:21:15] <hazzy-m> nice!
[11:21:25] <Lcvette> it actually built a yaml file by itself
[11:21:58] <hazzy-m> I see, so it did!
[11:22:06] <Lcvette> hurray!
[11:22:21] <Lcvette> it loads and works like the other screen
[11:22:26] <Lcvette> im impressed
[11:22:28] <Lcvette> :D
[11:22:43] <Lcvette> your designer is fu'ing like mad
[11:23:03] <Lcvette> im gonna do the lathe version now i think
[11:23:37] <hazzy-m> I can even type AAAA
[11:23:40] <hazzy-m> Hurray!!!
[11:23:43] <hazzy-m> lol
[11:23:56] <Lcvette> i know! which means as soon as we sort out the keys it should be working right?
[11:24:06] <hazzy-m> yes!
[11:24:08] <hazzy-m> sweet
[11:24:13] <Lcvette> hence the push!
[11:40:01] <Lcvette> anything specifically in the codede you need me to look for more information on?
[11:41:42] <hazzy-m> I think i'm good right now, thanks!
[11:42:02] <Lcvette> talk to me goose!
[11:42:28] <hazzy-m> lol
[11:42:30] <hazzy-m> still going thru it
[11:43:08] <Lcvette> we need a shared one of these:
[11:43:20] * Lcvette uploaded an image: image.png (148KB) < https://matrix.org >
[11:43:55] <hazzy-m> I think that toKeyCode it working
[11:44:00] <hazzy-m> need to play with it more
[11:47:13] <Lcvette> pyqt5 ToKeyCode
[11:48:47] <Lcvette> https://stackoverflow.com
[11:49:26] <Lcvette> thats for mac os, but i see they imported the key codes
[11:49:48] * Lcvette uploaded an image: image.png (59KB) < https://matrix.org >
[11:50:02] <Lcvette> they even showed how they did the shifted keys
[11:50:05] <Lcvette> :D
[11:50:09] <Lcvette> this looks good yes?
[11:54:14] <hazzy-m> yes, very good!
[11:55:51] * Lcvette uploaded an image: image.png (122KB) < https://matrix.org >
[11:55:56] <Lcvette> hahaha.. i found this one
[11:55:57] <Lcvette> :D
[11:56:06] <Lcvette> the A code special
[12:17:13] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]
[12:17:39] <hazzy-m> yes xD
[12:18:04] <TurBoss> morning
[12:18:16] <hazzy-m> morning TurBoss !
[12:18:21] <TurBoss> SUp?
[12:18:42] <Lcvette> morning!
[12:18:49] <TurBoss> hello!
[12:31:35] <TurBoss> you guys making progress
[12:31:36] <TurBoss> :P
[12:31:48] <hazzy-m> not much :(
[12:31:52] <TurBoss> :(
[12:32:08] <Lcvette> not much luck?
[12:32:10] <hazzy-m> still workin on the keyboard
[12:32:17] * hazzy-m is stukich
[12:32:27] <TurBoss> can I help?
[12:32:27] <hazzy-m> stuckish*
[12:32:52] <hazzy-m> if you would like
[12:33:01] <Lcvette> hurray!
[12:33:04] <TurBoss> sure, how?
[12:33:26] <TurBoss> sek I'll reboot to lcnc
[12:33:34] <Lcvette> the keyboard only makes A's
[12:33:39] <TurBoss> oh lol
[12:33:40] <TurBoss> :D
[12:33:43] <Lcvette> :D
[12:36:46] <hazzy-m> hurray!
[12:36:49] <hazzy-m> almost got it
[12:36:56] <Lcvette> yeah?
[12:36:58] <Lcvette> hurray!
[12:45:33] <TurBoss> Glenda : how are you?
[12:45:47] <TurBoss> Glenda will world end ?
[12:48:47] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03VKB [+0/-0/±2] 13https://gitlab.com/Hazzy/qtpyvcp/compare/b375abd1098d3136dd4ba246baae1515404dc4fd...18a2d4c94184747447fa6d9d2b1df48908a1e1d4
[12:48:49] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson 0318a2d4c - VKB mostly working
[13:00:58] <Lcvette> you did it?
[13:01:02] <Lcvette> hurray!
[13:03:16] <hazzy-m> kinda
[13:03:16] * hazzy-m uploaded a video: Peek 2018-12-23 13-02.webm (478KB) < https://matrix.org >
[13:03:42] <TurBoss> hurray!
[13:06:40] <Lcvette> looks like some serious progress!
[13:06:46] <Lcvette> getting an idea of where you are?
[13:07:47] <Lcvette> hurray!
[13:07:48] <Lcvette> :D
[13:23:53] * Lcvette posted a file: Lathe Jog Button Group.SLDASM (112KB) < https://matrix.org >
[13:25:19] * Lcvette uploaded an image: Lathe Jog Button Group.PNG (106KB) < https://matrix.org >
[13:49:17] <hazzy-m> looking in the old hazzy code
[13:49:19] * hazzy-m uploaded an image: image.png (37KB) < https://matrix.org >
[13:49:22] <hazzy-m> LOL
[13:49:57] <Lcvette> you found it?
[13:50:15] <hazzy-m> look at the comment in the last line
[13:50:15] <Lcvette> next time won't you sing with me
[13:50:30] <Lcvette> :D
[13:50:44] <Lcvette> hahaha
[13:51:06] <Lcvette> will ya tell me how to get, how to get to sesame street1
[13:51:15] <Lcvette> :D
[13:51:19] <hazzy-m> lol
[13:51:36] <Lcvette> 🤗
[13:52:43] <Lcvette> lcvette furiously builds Lathe gui interface
[13:52:46] <hazzy-m> I guess this is a valid dict entry `"'":'"'`
[13:52:48] <hazzy-m> LOL
[13:53:04] <Lcvette> lol
[13:53:05] <hazzy-m> hurray!
[13:53:06] <Lcvette> whoops
[13:53:38] <Lcvette> we are gonna roll out a full suite of amazing gui goodness
[13:53:58] <Lcvette> it will be unprecedented in linuxcnc history
[13:53:59] <hazzy-m> see ya PP
[13:54:19] <Lcvette> sp?
[13:54:26] <Lcvette> unpresendented
[13:54:31] <Lcvette> unprescedented
[13:54:38] <Lcvette> pick one
[13:54:39] <Lcvette> lol
[13:54:41] <Lcvette> :D
[13:54:46] <hazzy-m> xD
[13:54:56] <Lcvette> or 😨 none of the above
[14:27:23] <hazzy-m> bebas kia is only caps
[14:27:24] <hazzy-m> lol
[14:27:31] <hazzy-m> been realy confused by that
[14:42:14] <Lcvette> lol
[14:42:21] <Lcvette> yeah that would be confusing
[14:42:33] <Lcvette> lcvette gets confused when adding things sometimes
[14:43:01] <Lcvette> so i decided to add all text in capital letters just to be sure
[14:54:23] <hazzy-m> they keyboard should default to lowercase, right?
[14:54:35] <hazzy-m> yeah, of course
[14:54:36] <hazzy-m> lol
[14:55:16] <Lcvette> yeah
[15:26:43] <hazzy-m> how is the lathe interface comming along?
[15:41:08] <Lcvette> reworking some of the old graphics for the tooling dimensions because they were not in png format and had a white background
[15:41:24] * Lcvette uploaded an image: image.png (27KB) < https://matrix.org >
[15:53:59] <TurBoss> how can I test the vkb?
[15:54:56] * Lcvette uploaded an image: image.png (25KB) < https://matrix.org >
[15:56:09] <TurBoss> ohh its magic
[15:56:21] <TurBoss> it works out of the box with the mdi entry
[15:56:29] <TurBoss> nice picsLcvette
[15:56:30] <Lcvette> :D
[15:56:44] <Lcvette> yeah i have not tested yet, I will test in a minute
[15:56:49] <Lcvette> need to save my work first
[15:57:20] * TurBoss uploaded an image: image.png (224KB) < https://matrix.org >
[16:00:03] <Lcvette> nice!
[16:01:13] <TurBoss> MDI would require a deicated vkb
[16:01:22] <TurBoss> with common letters
[16:03:12] <Lcvette> why?
[16:03:20] <hazzy-m> Yes
[16:03:30] <TurBoss> or regular vkb
[16:03:37] <Lcvette> yes
[16:03:42] <TurBoss> to issue Gx
[16:04:17] <Lcvette> the vkb call from the box will determine the correct vxb that appears i think yes?
[16:04:52] <TurBoss> and found a bugged feature :D
[16:05:31] <TurBoss> the part zero dialog pops and if you click the number entry
[16:06:05] <TurBoss> the vkb diaglog apears
[16:06:17] <TurBoss> but the firts dialog hides the vkb
[16:06:35] <hazzy-m> Oops
[16:06:41] <TurBoss> don't worry
[16:06:42] <TurBoss> :D
[16:07:11] <TurBoss> how can I fix?
[16:07:15] <TurBoss> get parent?
[16:07:21] <TurBoss> parent?
[16:07:41] <TurBoss> if parent parent == dialog
[16:07:53] <TurBoss> or how?
[16:08:17] <hazzy-m> Maybe you can do:
[16:09:18] <hazzy-m> App.getModalWindow() and check if it is it's self, if not don't show
[16:09:37] * hazzy-m is awah
[16:24:04] * Lcvette uploaded an image: SWGCR_dwg.png (73KB) < https://matrix.org >
[16:30:50] * Lcvette uploaded an image: lathe_tool_dimensions.png (69KB) < https://matrix.org >
[16:46:05] * TurBoss uploaded an image: image.png (33KB) < https://matrix.org >
[16:54:37] * TurBoss uploaded an image: image.png (30KB) < https://matrix.org >
[17:04:24] <TurBoss> ⎆
[17:20:44] <Lcvette> sweet!!
[17:20:51] <Lcvette> looks good turboss
[17:20:59] <TurBoss> thanks
[17:21:20] <Lcvette> but put the letters all on one side to give it some flow
[17:21:20] * TurBoss uploaded an image: image.png (32KB) < https://matrix.org >
[17:21:21] <TurBoss> final version
[17:22:11] <Lcvette> letters and numbers close together
[17:22:32] <Lcvette> or you'll be going all over the pad to take advantage of the comapct size
[17:23:22] <TurBoss> compact
[17:23:33] <TurBoss> but can be spread
[17:24:00] <Lcvette> im talking about the ergomonics
[17:24:04] <TurBoss> how did you preview ?
[17:24:10] <TurBoss> yes
[17:24:26] <Lcvette> the position of the letters and numbers
[17:24:47] <Lcvette> you split the xyz and sfgtm and numbers
[17:24:58] <Lcvette> better to put those near each other
[17:25:08] <Lcvette> especially for fast entry on the mdi
[17:25:18] <Lcvette> I like the concept alot!
[17:25:27] <TurBoss> wan't to try?
[17:25:36] <Lcvette> sure
[17:25:42] <TurBoss> is on my branch
[17:26:03] * TurBoss uploaded an image: image.png (31KB) < https://matrix.org >
[17:27:04] * Lcvette uploaded an image: pblathetoolpage.png (190KB) < https://matrix.org >
[17:27:29] <TurBoss> niceeeee
[17:27:31] <Lcvette> question first on the tool table, did you make it so it could activate the other columns for lathe use?
[17:27:50] <TurBoss> can be added
[17:28:23] <Lcvette> coolio
[17:28:25] <Lcvette> ok
[17:28:36] <Lcvette> just checkout your thing?
[17:28:42] <TurBoss> no
[17:28:53] <TurBoss> I'm checking
[17:29:24] <TurBoss> is hardcoded
[17:30:04] <TurBoss> by default I can only show that
[17:30:27] <Lcvette> its ok
[17:30:34] <Lcvette> i can copy and make another one
[17:30:38] <Lcvette> on my one
[17:30:51] <TurBoss> for lathe?
[17:31:13] <TurBoss> I can add all the fields requires
[17:31:13] <Lcvette> i dunno im so lost
[17:31:22] <TurBoss> *required
[17:31:27] <Lcvette> i was just going to make a layout not a working one
[17:31:42] <TurBoss> I can just add the columns you need for lathe
[17:31:45] <TurBoss> can be 0
[17:31:50] <TurBoss> 0.
[17:31:58] <Lcvette> oh wait was talking about two different things
[17:32:10] <TurBoss> oh
[17:32:15] <TurBoss> :)
[17:32:40] <Lcvette> i was talking about the vkb
[17:32:43] <TurBoss> ok
[17:32:48] <Lcvette> just checkout
[17:33:12] <TurBoss> you can edit that one
[17:33:30] <Lcvette> as for the tool table, the mill table should not be changed
[17:33:36] <Lcvette> it needs to remain as it is
[17:33:42] <TurBoss> oh ok
[17:33:44] <Lcvette> no additional columns
[17:34:04] <Lcvette> the lathe neds additional columns
[17:36:11] <Lcvette> whats your vkb under?
[17:36:24] <Lcvette> i checked out your latest
[17:36:50] <TurBoss> qtpyvcp/widgets/dialogs/mdi_keypad.ui
[17:37:20] <TurBoss> not sure if the correct place yet
[17:44:51] * Lcvette uploaded an image: image.png (31KB) < https://matrix.org >
[17:48:58] * Lcvette uploaded an image: image.png (28KB) < https://matrix.org >
[17:49:30] <TurBoss> cool!
[17:54:12] <Lcvette> but i see some issues maybe
[17:54:34] <Lcvette> if you only have touchscreen and want to add some subroutine code then what?
[17:54:53] <TurBoss> on the mdi?
[17:56:51] <Lcvette> yes
[17:57:14] <TurBoss> then just regular kb :D
[17:57:23] <TurBoss> and nuke this one
[17:57:25] <Lcvette> not if you don't have one?
[17:57:35] <TurBoss> vkb I mean
[17:57:39] <Lcvette> yes
[17:57:48] <Lcvette> can there be a button to switch to it?
[17:57:58] <Lcvette> FULL
[17:57:59] <Lcvette> ?
[17:58:21] <Lcvette> FKB
[17:59:13] <Lcvette> if so you could use just one code for allboxes then
[18:03:12] <Lcvette> do i push changes?
[18:03:15] <Lcvette> or delete?
[18:05:43] <TurBoss> delete :D
[18:08:58] <Lcvette> deleted
[18:19:38] <hazzy-m> Oh, I like the MDI VKB!
[18:33:34] <Lcvette> hazzy, where do i go in to make the probe basic one?
[19:13:37] * Lcvette uploaded an image: image.png (26KB) < https://matrix.org >
[19:14:02] <Lcvette> pushing this
[19:14:28] <TurBoss> cool
[19:15:03] <Lcvette> pushed
[19:21:23] <Lcvette> for some reason when i pull up the virtual keyboard to enter in some numbers, it pops up the top menu bar and it covers the FILE MACHINE etc menu in the interface and won't go away
[19:24:37] <TurBoss> hmmmmmmmmmm
[19:25:37] <Lcvette> same there?
[19:25:40] * hazzy-m posted a file: JT Mint LinuxCNC.txt (3KB) < https://matrix.org >
[19:26:21] * Lcvette uploaded an image: image.png (424KB) < https://matrix.org >
[20:55:32] -!- mint_ has joined #hazzy
[20:55:57] mint_ is now known as hazzy-mint
[20:56:17] * hazzy-mint is playing with mint 19.1
[20:56:29] <hazzy-mint> it is very nice
[20:56:50] <Lcvette> ?
[20:57:21] <hazzy-mint> Mint is the OS JT uses
[20:58:12] <hazzy-mint> My SDD failed, so I'm running mint off a USB till I can get a new one in the morning
[20:58:33] <hazzy-mint> SSD*
[21:00:07] <Lcvette> minty fresh
[21:03:11] <TurBoss> debian rules!
[21:03:28] <TurBoss> but turbolinuxcnc will pwnz
[21:17:17] <hazzy-mint> debian does rule, but mint has gotten much better!
[21:21:10] <hazzy-mint> https://imgur.com
[21:21:47] * hazzy-mint tries to install QtPyVCP
[21:28:34] <TurBoss> ```
[21:28:35] <TurBoss> sudo apt-key adv --keyserver hkp://keys.gnupg.net --recv-key E0EE663E ```
[21:28:39] <TurBoss> ```
[21:28:39] <TurBoss> sudo apt-key adv --keyserver hkp://keys.gnupg.net --recv-key E0EE663E
[21:39:41] <hazzy-mint> TurBoss: Thanks, that worked!!
[21:39:52] <TurBoss> :)
[21:40:12] <TurBoss> just wiped my mobile...
[21:40:15] <TurBoss> again....
[21:40:21] <TurBoss> :_(
[21:40:26] <hazzy-mint> oh no!
[21:40:28] <hazzy-mint> how?
[21:40:52] <TurBoss> I was about to enable usb debug
[21:41:05] <TurBoss> I have fat finger
[21:41:06] <TurBoss> s
[21:43:06] <hazzy-mint> :(
[21:49:18] <Lcvette> uh oh
[21:49:24] <Lcvette> that doesn't sound good
[21:49:26] <Lcvette> :(
[21:50:14] <TurBoss> hihihiihih
[21:50:32] <Lcvette> hazzy-mint: question hazzy, for the A,B, C axis's dro's etc, is there a way for them to not show up on the screen unless they are configured in the ini?
[21:50:54] <hazzy-mint> yes
[21:51:04] <hazzy-mint> you can use rules
[21:51:04] <Lcvette> i don't mean grayed out
[21:51:09] <Lcvette> i mean not visible at all
[21:51:28] <hazzy-mint> the status labels have a Visible property
[21:51:54] <hazzy-mint> if the rule sets that to false then it will be hidden completely
[21:51:54] <Lcvette> how about all the buttons?
[21:52:05] <hazzy-mint> they should have it too
[21:52:19] <hazzy-mint> actually I think they all have it
[21:52:40] <hazzy-mint> not sure how best to check it an axis is configure ...
[21:52:43] <Lcvette> ok, do they just dissappear? or is there place holder formatting removed as well?
[21:53:06] <hazzy-mint> I plan to add an INI data pluging eventualy which would make it easy
[21:53:47] <hazzy-mint> they dissappear, and any space they occupied will be available for other wodgets to take up
[21:54:32] <hazzy-mint> I think you should use the `status:joints` channel
[21:54:42] <hazzy-mint> the expressions should be something like:
[21:54:45] <Lcvette> need to think that through a bit
[21:54:53] <Lcvette> not sure how to design around that
[21:55:01] <Lcvette> because it may not be so easy
[21:55:10] <hazzy-mint> `if ch[0] < joint_num`
[21:55:35] <hazzy-mint> you could just have extras space added around the other DROs..
[21:55:44] <hazzy-mint> might look OK
[21:59:43] * Lcvette uploaded an image: Screenshot_2018-12-23_21-59-21.png (166KB) < https://matrix.org >
[22:08:50] -!- sul has joined #hazzy
[22:09:15] -!- sul has quit [Client Quit]
[22:25:06] <hazzy-mint> Lcvette: Maybe add a spacer at the bottom and just left them stay at the top?
[22:28:41] <Lcvette> the lathe screen is just going to have to be different
[22:28:54] <Lcvette> needs to be different anyhow
[22:29:06] <Lcvette> there are enough changes to warrant a seperate file
[22:29:16] <hazzy-mint> ah, is that why you only had two DROs
[22:29:22] <hazzy-mint> yeah, I think so
[22:29:22] <Lcvette> yeah
[22:29:44] <hazzy-mint> and a lathe not need probing and stuff either
[22:29:51] <hazzy-mint> and need diffrent ATC stuff
[22:30:04] <Lcvette> was trying to see if I could make one probe_basic file work on everything but its unrealistic unless it would look like a hacked piece of crap
[22:31:53] * Lcvette uploaded an image: Screenshot_2018-12-23_22-25-09.png (162KB) < https://matrix.org >
[23:05:05] * Lcvette uploaded an image: Screenshot_2018-12-23_23-04-46.png (165KB) < https://matrix.org >
[23:16:35] <Lcvette> I am not sure what else to do there
[23:16:37] <Lcvette> lol
[23:18:00] <Lcvette> i don't have much experience with lathe software
[23:18:14] <Lcvette> i used msm a little bit for millturn but thats not the same
[23:18:29] <Lcvette> not sure if there are some other buttons i could add in down there or?
[23:18:49] <Lcvette> but then what if someone wanted to use a multi axis lathe with more than x and z?
[23:22:52] -!- hazzy-mint has quit [Ping timeout: 264 seconds]