#hazzy | Logs for 2018-12-24

Back
[00:41:02] <hazzy-m> Lcvette: I think most lathes also have a doameter DRO ...
[00:43:24] <Lcvette> Yeah that is usually the x axis
[00:43:37] <Lcvette> It would switch between either radius or diameter
[00:43:58] <Lcvette> ?
[00:44:42] <hazzy-m> They have a separate DRO for dia
[00:44:48] <Lcvette> Ok
[00:47:45] <Lcvette> and css
[00:50:32] * Lcvette uploaded an image: image.png (1276KB) < https://matrix.org >
[01:07:57] <Lcvette> can the increment widget thingy be made to layout either vertically or horizontally?
[01:08:05] <Lcvette> hazzy?
[01:09:53] <hazzy-m> Yes, it should be selectable
[01:10:18] <hazzy-m> There should be a box to select horizontal or vertical
[01:10:34] <hazzy-m> In the property browser
[01:10:58] * hazzy-m heads to bed
[02:38:37] <Lcvette> hazzy, if you get a minute, take a look at the slider for the jograte, its inverted and i can't for the life of me figure out how to flip its movement, i tried the check boxes but they don't work in the property manager. stumped
[02:38:41] <Lcvette> night!
[04:24:18] <TurBoss> morning
[04:24:43] <TurBoss> cab this king of encode be wired to a 7i76 ?
[04:24:49] <TurBoss> *can
[04:24:51] * TurBoss uploaded an image: image.png (36KB) < https://matrix.org >
[04:24:59] <TurBoss> *kind
[06:27:38] <jthornton> morning
[06:29:53] <jthornton> what are you using the encoder for?
[06:42:00] <TurBoss> Mpg
[06:44:28] <jthornton> yes IIRC the 7i76 has a mpg input
[06:47:27] <jthornton> look on page 24 http://www.mesanet.com
[06:57:13] <TurBoss> Thanks
[10:31:13] <hazzy-m> TurBoss: Yes! You can also use those little encoders for overrides
[10:31:31] <TurBoss> hurray
[10:52:01] <Lcvette> morning!
[10:52:04] <Lcvette> :D
[11:08:35] <hazzy-m> morning
[11:14:36] <JT-Shop2> morning
[11:16:00] <hazzy-m> happy christmas eve!
[11:16:21] * hazzy-m looks into the slider
[11:18:24] <jthornton> happy chickens eve
[11:18:35] <hazzy-m> LOL
[11:21:13] * JT-Shop really needs to finish the bathroom remodel this year lol
[11:23:15] <Lcvette> happy Quansa
[11:23:22] <Lcvette> :D
[11:23:25] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson pushed 038 commits to 03VKB [+127/-0/±8] 13https://gitlab.com/Hazzy/qtpyvcp/compare/18a2d4c94184747447fa6d9d2b1df48908a1e1d4...f3618ed5d6aa8f1cf97649dcb967a2da47299ac2
[11:23:26] <Not-97e5> [02QtPyVCP] 07Lcvette 03b5f3f59 - added probe basic lathe version start
[11:23:26] <Lcvette> and a m,ery Christmas
[11:23:27] <Not-97e5> [02QtPyVCP] 07Lcvette 03c698b7f - Merge remote-tracking branch 'Lcvette/VKB' into VKB
[11:23:29] <Not-97e5> [02QtPyVCP] 07Lcvette 032b92565 - added lathe tool graphic
[11:23:31] <Not-97e5> [02QtPyVCP] ... and 5 more commits.
[11:24:08] <Lcvette> Festivus for the rest of us!
[11:24:10] <Lcvette> :D
[11:24:47] <hazzy-m> Lcvette: 'bama is not in the white house any more
[11:24:48] <hazzy-m> xD
[11:24:56] <Lcvette> :O
[11:26:10] <Lcvette> :D
[11:30:04] <jthornton> `obumble
[11:30:33] <Lcvette> hahahah
[11:30:43] <hazzy-m> LOL
[11:30:58] <Lcvette> lcvettes linux box is doing funky things
[11:31:10] <Lcvette> screen is going wonky
[11:31:24] <hazzy-m> flashing on and off?
[11:31:24] <Lcvette> started last night
[11:31:36] <hazzy-m> screen upside down?
[11:32:04] <Lcvette> smearing and discecting the screen image
[11:32:19] <hazzy-m> yep, same here
[11:32:27] <hazzy-m> that makes me feel better
[11:32:50] <hazzy-m> I have tried three graphics cards and still the same problem
[11:33:25] <hazzy-m> I think it might be related to a Firefox update, since I don't have problems if FF is not running
[11:33:50] <hazzy-m> but is also happend with Mint 18.1 last night
[11:33:52] <hazzy-m> :(
[11:34:00] <hazzy-m> 19.1*
[11:35:08] <hazzy-m> https://www.microcenter.com(120g)#
[11:35:23] * hazzy-m is going to go get as menay as he can
[11:39:28] <Lcvette> im not running firefox
[11:39:35] <Lcvette> or wasn't when it happened
[11:39:41] <Lcvette> at least not actively
[11:39:52] <Lcvette> whoa thats a good price huh
[11:41:13] <hazzy-m> shoot, well I havent actualy not had FF up for long enough to tell for sure if that was it or not, but I sure was hopping it was
[11:41:15] <hazzy-m> :(
[11:41:29] <hazzy-m> I can't find anything about the problem online
[11:44:09] <hazzy-m> but the fact that it happens with multiple graphics cards and OSs it not good
[11:44:41] <hazzy-m> linux is learning from windows
[11:44:42] <hazzy-m> :(
[11:44:43] <hazzy-m> lol
[11:44:47] <Lcvette> does yours only happen when you have designer running?
[11:44:59] <Lcvette> or the probe basic thingy running?
[11:45:05] <Lcvette> could it be a RIP issue?
[11:45:09] <hazzy-m> no, anytime
[11:45:25] <hazzy-m> even when I don't have anything LCNC related installed
[11:45:26] <Lcvette> maybe motherboard issue?
[11:45:36] <hazzy-m> could be ...
[11:46:04] <hazzy-m> I changed the PCI slot the the GPU was in and it might have helpd a little, but I can't tell for sure
[11:50:40] <Lcvette> did you see the dilema i was facing with the slider?
[11:51:07] <Lcvette> lcvette battled it for almost 2 hours last night
[11:51:52] <Lcvette> figured out the graphics for the vertical and everything but couldn't for the life of me figure out how to make the graphics for the slider fill change
[11:52:10] <hazzy-m> Yes, the slider was right, but I had to change the qss
[11:52:23] <hazzy-m> I pushed the fix
[11:52:51] <Lcvette> sweet!
[11:53:10] <Lcvette> learned alot about lathe stuff this morning
[11:53:14] <Lcvette> no G43
[11:53:43] <Lcvette> T01 or T0101 for your tool offset
[11:53:45] * hazzy-m don't know nuthin bout lathes
[11:54:03] <Lcvette> thats ok lcvette is learning it so the layout will be correct
[11:54:06] <Lcvette> :D
[11:57:08] <hazzy-m> Fantastic! EricCNC is excited about your lathe layout
[11:57:28] <Lcvette> tell him to come in here and give me some information!
[12:12:09] * JT-Shop2 just looked at Lcvette work on the forum... that is very very impressive!
[12:12:35] <Lcvette> Hurray!
[12:13:35] <Lcvette> now to learn the rest of the lathe layout requirements and finish it up and offer it in a horizontal and vertical flavor
[12:13:40] <Lcvette> then plasma
[12:14:17] <Lcvette> then scrunch them for the box screen peeps
[12:15:28] <Lcvette> none of it would be possible without Hazzy's builder setup... the wonders of ebing able to manipulate eveything without it breaking is awesome
[12:17:45] <Lcvette> and of course Turboss's excellent help!
[12:17:54] <TurBoss> :)
[12:24:06] <JT-Shop2> damn 2.5 hours to fit one piece of moulding and a mile of walking back and forth from here to the master bathroom
[12:24:30] <Lcvette> thats a workout!
[12:24:33] <Lcvette> lol
[12:25:25] <JT-Shop2> yea everything is out here in the new shop which is behind the machine shop/garage which is detached from the house lol
[12:25:52] <JT-Shop2> and a difficult piece to fit so lots of trips back and forth
[12:30:22] <Lcvette> hazzy, can you merge those the new ones for me?
[12:30:37] <Lcvette> i tried just copying over the new qss file but it didn't work
[12:30:46] <Lcvette> or do i need to do something else also?
[12:31:15] -!- Roguish has joined #hazzy
[13:10:15] <jthornton> yea the server came up on the network headless so now I can put the monitor back on the debian pc and play
[13:10:29] <jthornton> but first I'm on holiday so it's nap time
[13:35:48] <TurBoss> Just did a rat
[13:35:52] * TurBoss uploaded an image: image.png (1225KB) < https://matrix.org >
[13:36:06] <TurBoss> not much similar to the model :(
[13:36:14] <TurBoss> i need more tools :D
[13:36:24] <TurBoss> https://www.blendswap.com
[13:37:04] <Lcvette> tools make all the difference
[13:55:42] -!- kurt_ has joined #hazzy
[13:55:57] kurt_ is now known as kcjengr
[13:57:23] * kcjengr got new SSDs
[14:05:10] <TurBoss> nice
[14:15:10] <TurBoss> just updated to master, mini and others work, but no jcnc 😕
[14:15:30] -!- kcjengr has quit [Remote host closed the connection]
[14:15:56] -!- kcjengr has joined #hazzy
[14:16:41] <TurBoss> http://dpaste.com
[14:17:37] <kcjengr> TurBoss: pip install -e .
[14:17:39] <kcjengr> for jcnc
[14:18:04] <kcjengr> that will update the entry points and it should load
[14:18:14] <TurBoss> nop
[14:18:18] <kcjengr> :(
[14:18:26] * kcjengr goes to the dev PC to test
[14:18:33] <TurBoss> thanks
[14:22:38] <TurBoss> this is the real machine
[14:23:03] <TurBoss> removed debs none installed
[14:23:58] -!- JT-Shop has quit [Remote host closed the connection]
[14:25:16] -!- JT-Shop has joined #hazzy
[14:25:50] <hazzy-m> if works here
[14:25:52] <hazzy-m> hmmm
[14:25:56] <hazzy-m> it*
[14:26:00] <TurBoss> ok
[14:26:12] <hazzy-m> I just pulled latest jcnc
[14:26:25] <TurBoss> jame here
[14:26:36] <TurBoss> just updated from old qtpyvcp
[14:27:10] <hazzy-m> did you pip install -e for both JCNC and QtPyVCP?
[14:27:27] <TurBoss> yes
[14:27:45] <TurBoss> how do you export path of .local/bin
[14:27:48] <TurBoss> ?
[14:28:41] <hazzy-m> I use the .xsessions file from the scripts dir now
[14:28:49] <hazzy-m> put in in home/
[14:28:57] <hazzy-m> user hme
[14:31:30] <TurBoss> how?
[14:33:38] <TurBoss> ah oh found t
[14:33:40] <TurBoss> it*
[14:34:08] <hazzy-m> sorry, is hidden
[14:36:06] <TurBoss> ehhehehe
[14:36:09] <TurBoss> fixed
[14:36:18] <TurBoss> reloged and gorked
[14:36:21] <TurBoss> worked**
[14:37:41] <hazzy-m> hurray!!!
[14:37:47] <TurBoss> after install xssession
[14:38:18] <hazzy-m> I whish we did not need .xsessionrc ...
[14:38:22] <TurBoss> Q: how can I hide the menu and set fullscreen?
[14:38:51] <TurBoss> from ini DISPLAY args?
[14:39:00] <hazzy-m> yes, but I broke it
[14:39:10] <TurBoss> oh... !
[14:39:14] <hazzy-m> you used to be able to pass the --hide-menu-bar flag
[14:39:27] <TurBoss> that works?
[14:39:35] <hazzy-m> in the ini it would be [DISPLAY] HIDE_MENU_BAR=True
[14:39:42] <hazzy-m> I'll try to fix it
[14:39:44] <hazzy-m> sek
[14:44:04] <TurBoss> none works yet
[14:44:05] <TurBoss> :d
[14:50:03] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±1] 13https://gitlab.com/Hazzy/qtpyvcp/compare/14e25b44e77793593d84a1539455f84ec0cc6824...b2502b192b81fa0576eda99264b3edc180d07820
[14:50:04] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson 03b2502b1 - BUG: make it possible to hide the menu bar again
[14:50:23] <hazzy-m> fullscreen also works now
[14:50:59] <hazzy-m> I broke the stuff for setting the position too
[14:51:02] <hazzy-m> I'll fix
[14:57:09] <TurBoss> checking
[14:59:08] <TurBoss> does something like
[14:59:09] <TurBoss> HIDE_MENU_BAR = true but for fullscreen exist?
[14:59:16] <TurBoss> fullscreen works fine!
[14:59:52] <hazzy-m> yes, FULLSCREEN=true
[15:01:22] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±1] 13https://gitlab.com/Hazzy/qtpyvcp/compare/b2502b192b81fa0576eda99264b3edc180d07820...84502b162c0283b71314f24c3eafbb9db63d3c1e
[15:01:24] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson 0384502b1 - add handling for size and position arguments
[15:04:29] <hazzy-m> did you get it to work from the INI?
[15:05:27] * TurBoss uploaded a video: 20181224_210348.mp4 (61087KB) < https://matrix.org >
[15:05:28] <TurBoss> yes
[15:33:23] -!- kcjengr has quit [Remote host closed the connection]
[15:48:54] <Lcvette> its working?
[15:53:03] <Lcvette> whats happening?
[15:54:49] <TurBoss> it works!
[15:55:15] <Lcvette> hurray!
[15:55:20] <hazzy-m> Hurray!
[15:55:32] * hazzy-m sets the vid downloading
[15:57:38] <hazzy-m> TurBoss: Looks great!!!
[15:57:40] <Lcvette> hazzy, you mentioned something earlier that didn't register until just a few minutes ago... my screen goes black
[15:58:02] <Lcvette> it always has, i thought is was some kind of screen saver mode
[15:58:21] <hazzy-m> when your working does it randomly go black?
[15:58:33] <Lcvette> not while i am working ever
[15:58:35] <hazzy-m> Mine does it like every 30s for 500ms to 2s
[15:58:44] <Lcvette> but if it sits idle even for a few minutes it will
[15:58:51] <Lcvette> but it comes back on bys itself
[15:59:36] <Lcvette> it has done that since i started using it way back when i put it in service
[15:59:58] <Lcvette> but the smeared screen only seems to happen if i am running the probe basic
[16:00:04] <Lcvette> the actual software
[16:00:13] <Lcvette> not just the designer by itself
[16:05:20] -!- emilvv has joined #hazzy
[16:05:34] -!- emilvv has quit [Client Quit]
[16:06:40] <Lcvette> hazzy i need to add buttons?
[16:06:45] <Lcvette> for the backplot?
[16:09:32] <Lcvette> what kind?
[16:09:45] <Lcvette> i will add them!
[16:09:52] <Lcvette> you know i like to add buttons
[16:09:52] <Lcvette> !
[16:09:54] <Lcvette> :D
[16:29:06] * jthornton wonders what the reason was for adding the Vietnamese g code quick reference to master was
[16:29:22] <jthornton> I did find my debian 9 hard drive finally
[16:47:10] <Lcvette> hahahaha
[16:52:22] <TurBoss> how can I see the notifications?
[16:58:59] <hazzy-m> TurBoss: What norifications?
[17:00:00] <TurBoss> the ones that usually pop
[17:00:15] <TurBoss> the notification channel
[17:00:39] <hazzy-m> do you not see them?
[17:00:46] <TurBoss> no
[17:00:55] <TurBoss> in fullscreen now
[17:00:58] <TurBoss> sek
[17:01:05] <hazzy-m> hurray!
[17:01:20] <hazzy-m> Oh, I broke notifications
[17:01:23] <hazzy-m> :(
[17:01:26] <TurBoss> what?
[17:01:49] <TurBoss> can I made a notification histo widget?
[17:01:54] <hazzy-m> do you mean the LCNC norifications or the github one?
[17:01:59] <TurBoss> like a list with a delete button
[17:02:02] <hazzy-m> yes! Please!
[17:02:09] <hazzy-m> Thank you
[17:02:33] <TurBoss> exist something that access notification chanel of lcnc
[17:02:58] <TurBoss> ?? is a question lol
[17:02:58] <hazzy-m> the status plugin should have a signal
[17:03:02] <hazzy-m> sek
[17:03:05] <TurBoss> oh great
[17:03:45] <hazzy-m> yes, status.error
[17:04:02] <hazzy-m> https://github.com
[17:04:46] <hazzy-m> not sure if it still works
[17:05:27] <TurBoss> oh ok
[17:24:07] <Roguish_desk> hazzy-m: checking things again. on the jog control, after selecting a distance like 0.100, in order to move the full distance ya gotta hold the button down, not just click on it. what's with that?
[17:25:13] <hazzy-m> Yes, that is a know bug, just haven't had time to squish it yet
[17:28:15] <Roguish_desk> ok.
[17:29:05] <Roguish_desk> does MDI work?
[17:29:21] <Roguish_desk> doesn't seem to wanna go.
[17:31:07] <hazzy-m> It should, as long as the machine is on and homed
[17:31:36] <hazzy-m> It will print an error the terminal if not
[17:31:51] <hazzy-m> I still need to work on notifications
[17:34:49] <Roguish_desk> ok, it worked this time. not sure what was going on a bit ago.
[17:37:27] <Roguish_desk> what's the gcode editor based on? is it a super simple text editor? can an alternate be specified like in axis?
[17:39:34] <hazzy-m> It is actually based on a very full featured editor, but I haven't implemented much of it
[17:40:10] <hazzy-m> I also have a lighter weight one in the works
[17:40:25] <TurBoss> cool!
[17:42:35] <TurBoss> I'm unable to load a python component using the custom_postgui.hal
[17:43:54] <TurBoss> on the other machine worked fine :D
[17:44:02] <TurBoss> 2.8 master both
[17:47:24] <TurBoss> ok figured
[17:47:34] <Roguish_desk> hazzy-m: i just changed the font color from white to blue on the 'current machine codes status' much better. now I can read it. white is not a good font color especially on a very light background.
[17:48:18] <Roguish_desk> also made the dropdown box for the backplot vector selection much bigger (font too.)
[17:48:53] <Roguish_desk> i'm working on a 28" monitor, and some of the menues are smalllllll
[17:50:07] <TurBoss> amazing
[17:50:32] <Lcvette> which menus?
[17:50:48] <Lcvette> which gui?
[17:52:36] <Lcvette> Roguish_desk:the last picture you posted for some reason had some of the color scheme wrong on the Probe Basic inrerface
[17:52:54] <Lcvette> i commented about it but got no answer from you
[17:53:32] <Lcvette> so im not sure if you are making comments based on your incorrect gui display or the standard display colors which don't have much of a color scheme contrast issue
[17:53:39] <Lcvette> at least that i have seen
[17:53:46] <Lcvette> the menu items can you be specific?
[17:53:55] <Lcvette> i can take a look at those
[17:54:23] <Roguish_desk> like the current command codes i just cited. couldn't read them with a white font on a light background.
[17:55:28] <Roguish_desk> i haven't messed with any of the general color schemes.
[17:55:36] * Lcvette uploaded an image: image.png (65KB) < https://matrix.org >
[17:55:51] <Lcvette> standard background is gray
[17:55:57] <Lcvette> white stands out nicely i think
[17:56:06] <Lcvette> but i saw a picture you posted and it looked tan
[17:57:58] <Roguish_desk> http://i.imgur.com
[17:58:36] <Lcvette> the background is wrong color on yours
[17:58:50] <Lcvette> probably why it was so low contrast
[17:58:57] <Lcvette> not sure why
[17:58:58] <Roguish_desk> not sure how mine became so light...
[17:59:39] <Lcvette> maybe changed when you added the ferror status
[18:00:28] <Roguish_desk> hey how ya going to hook up something to the 'spindle load' meter?
[18:00:52] <Lcvette> ?
[18:01:05] <Lcvette> mechanically?
[18:01:13] <Lcvette> or in the software?
[18:01:39] <Roguish_desk> no, signal wire, electronically and programmatically?
[18:02:14] <Lcvette> i researched it when we added the meter but can't remember the detasils at the moment
[18:02:18] <Lcvette> wasn't difficult
[18:02:45] <Roguish_desk> ok.
[18:02:47] <Lcvette> there are some examples online
[18:02:54] <Lcvette> for the mechanical portion
[18:03:05] <Lcvette> some vfd's have outputs as well as drives
[18:03:22] <hazzy-m> most VFDs have a load output of some sort, thur modbus etc.
[18:03:39] <hazzy-m> the load meter would probably have a HAL pin
[18:04:25] <Roguish_desk> i have a coil on one leg of the motor wires.
[18:04:34] <Lcvette> if not there are some components you can purchase to measure the load on the motor wire amp draw and will convert and send out a signal in a 0-5v range
[18:05:25] <Lcvette> they are designed for a analog gauge but i imagine could be used for analog input on the mesa
[18:07:51] <Roguish_desk> if ya have an signal (analog or digital) to monitor, great.
[18:09:02] <Roguish_desk> where are to color scheme colors set?
[18:09:23] <Lcvette> yeah, thats what im saying, you can get a component to generate that signal based on the motor load
[18:09:32] <Lcvette> they aren't very expensive
[18:09:37] <Lcvette> they are programmable too
[18:09:51] <Lcvette> from amperage A to Amperage B sweep
[18:12:14] <TurBoss> have you guys seen this error befor?
[18:12:16] <TurBoss> error: emcStatusBuffer invalid err=3
[18:12:22] <TurBoss> before*
[18:12:56] <hazzy-m> yes
[18:13:00] <hazzy-m> many times
[18:13:13] <hazzy-m> It usialy meanst the LCNC is not running
[18:13:18] <Roguish_desk> I like the MDI box under the tool display. handy.
[18:13:23] <hazzy-m> but you are trying to poll the status channel
[18:13:27] <Roguish_desk> handy to do an M6 Tn
[18:14:36] <Roguish_desk> what would also be nice is to click on the tool line in the listing,and have the tool display update
[18:16:34] <TurBoss> if I run it from from halrun it throws that error
[18:17:11] <TurBoss> but if I do frim INI hal it does nothing
[18:18:12] <Roguish_desk> Lcvette. on the Offset page, what is the G52/G92 offset? do you mean G53/G92 ?
[18:18:30] <Lcvette> no
[18:18:37] <Lcvette> G52/G92
[18:18:57] <Lcvette> G52 is new for linuxcnc
[18:19:15] <Lcvette> not alot of info on it yet though in the documentation
[18:19:21] <Roguish_desk> yeah, who's got a G52? not in docs, even master
[18:19:25] <Lcvette> similar to G92 offset
[18:19:43] <Lcvette> work offset shift
[18:20:07] <Roguish_desk> ok, that would explain it
[18:20:23] -!- JT-QtPyVCP has joined #hazzy
[18:21:21] <Roguish_desk> yo, Chicken Little is here...
[18:21:51] <JT-QtPyVCP> fresh install I get this error https://paste.ubuntu.com
[18:23:30] <JT-QtPyVCP> I'm on debian 9 here
[18:24:22] <JT-QtPyVCP> also I didn't get any sample configs when I installed qtpyvcp
[18:24:48] <jthornton> JT is everywhere lol
[18:27:39] <Lcvette> lol you are a floater
[18:27:50] <Lcvette> hazzy will have to help ya there
[18:29:24] <jthornton> yea, just trying to get up to speed with this so I can contribute some
[18:29:41] <Lcvette> hurray!
[18:30:36] <jthornton> I just need to wrap my head around all that is going on so I understand what is what
[18:30:41] <Lcvette> everything up to date?
[18:31:34] <jthornton> yea, I just cloned both a few minutes ago and installed as well as updated etc
[18:32:40] <Lcvette> defnitely a hazzy
[18:33:28] <JT-QtPyVCP> I can launch the designer with the launch script but get The file /home/john/qtpyvcp/scripts/examples/mini/mini.ui could not be opened: No such file or directory Do you want to update the file location or generate a new form?
[18:33:44] <JT-QtPyVCP> hmm and don't see the widgets for qtpyvcp
[18:34:05] <JT-QtPyVCP> oh wait there is a script to copy them IIRC
[18:34:25] <Lcvette> yes
[18:34:29] <Lcvette> i don't know it
[18:34:32] <Lcvette> but there is
[18:34:37] <Lcvette> pip?
[18:34:44] <Lcvette> pip. e
[18:34:45] <Lcvette> ?
[18:34:49] <Lcvette> something like that?
[18:35:15] <jthornton> I did that :)
[18:35:23] <Lcvette> ah
[18:37:26] -!- JT-QtPyVCP has quit [Quit: Leaving]
[18:37:28] <Lcvette> chris@debian:~$ /home/chris/dev/linuxcnc-master/scripts/linuxcnc "/home/chris/dev/qtpyvcp-master/sim/xyz.ini"
[18:38:07] <Lcvette> chris@debian:~$ xfce4-terminal -H -x /home/chris/dev/linuxcnc-master/scripts/linuxcnc "/home/chris/dev/qtpyvcp-master/sim/xyz.ini"
[18:38:40] <Lcvette> chris@debian:~$ export PATH=$PATH:~/.local/bin/
[18:38:41] <Lcvette> any of these look familiar?
[18:38:48] <Lcvette> these are in my history that hazzy had me type in
[18:39:03] <Lcvette> chris@debian:~$ python setup.py develop --user
[18:39:14] <Lcvette> chris@debian:~$ cd ~/dev/qtpyvcp-master
[18:39:25] <Lcvette> chris@debian:~$ python setup.py develop --user
[18:39:37] <Lcvette> chris@debian:~$ pip install ~/dev/qtpyvcp-master
[18:39:53] -!- JT-QtPyVCP has joined #hazzy
[18:39:59] <Lcvette> chris@debian:~$ pip install .
[18:40:15] <Lcvette> chris@debian:~$ chris@debian:~/dev/qtpyvcp-master/QtPyVCP$ cd
[18:40:26] <Lcvette> chris@debian:~$ chris@debian:~/dev/qtpyvcp-master/QtPyVCP$ pip install .
[18:41:44] <Lcvette> theres hazzy!
[18:42:57] <JT-QtPyVCP> hmm all seems to be proper with the .so files john@mesa-eth:/usr/lib/x86_64-linux-gnu/qt5/plugins/designer$ ls
[18:42:59] <JT-QtPyVCP> libpyqt5_py2.so libpyqt5.so.old libqwebview.so
[18:42:59] <JT-QtPyVCP> libpyqt5_py3.so libqquickwidget.so
[18:42:59] <JT-QtPyVCP> john@mesa-eth:/usr/lib/x86_64-linux-gnu/qt5/plugins/designer$
[18:58:22] <hazzy-m> The .so files look fine
[18:58:29] <hazzy-m> I'll have to look later
[18:58:40] <hazzy-m> lots of festivities here RN
[18:58:42] <hazzy-m> lol
[18:59:47] <hazzy-m> jthornton: what is you webstore address? can't seem to find it
[19:02:25] <hazzy-m> found it!
[19:09:20] <Lcvette> whose?
[19:09:21] <Lcvette> mine?
[19:09:49] <Lcvette> nevermind
[19:10:03] <Lcvette> lcvettes eyes are glazed over
[19:15:57] <hazzy-m> lol
[19:32:42] * Lcvette uploaded an image: Screenshot_2018-12-24_19-27-32.png (173KB) < https://matrix.org >
[19:33:47] <Lcvette> OK, THINK THIS IS WHAT I SETTLED ON FOR THE LATHE LAYOUT
[19:33:53] <Lcvette> sorry for the caps
[19:34:00] <Lcvette> that was more difficult than i thought
[19:46:15] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]
[20:09:22] * Lcvette uploaded an image: Screenshot_2018-12-24_19-27-32.png (122KB) < https://matrix.org >
[20:26:18] <hazzy-m> That slider is still messed up
[20:27:55] <Lcvette> thats because i had a ton of work already done
[20:28:25] <Lcvette> so this is all from before your merge
[20:29:10] <Lcvette> im not sure how to merge them if you branch off like that for a fix
[20:30:05] <Lcvette> so i just ask and wait
[20:30:07] <Lcvette> lol
[21:17:52] <hazzy-m> I only changed the qss file, so it should merge fine, I'd be glad to to it though
[21:18:43] <Lcvette> i tried copying over the qss file while i had your version pulled and copied it to the desktop then pulled my version and copied it over but it didn't fix it
[21:18:44] <Lcvette> :(
[21:19:03] <Lcvette> thought i was being clever
[21:22:29] * Lcvette uploaded an image: Screenshot_2018-12-24_21-22-07.png (174KB) < https://matrix.org >
[21:23:17] <Lcvette> -for tool setter, i find its faster to bench measure with the tts granite block and the igaging tool height setter i bnought
[21:23:29] <Lcvette> hurray it merged!
[23:05:27] <hazzy-m> Hurray!
[23:05:51] <hazzy-m> all the kidos left, now I can at least here myself think
[23:24:52] <Lcvette> hahaha
[23:25:00] <Lcvette> thats tomorrow night for me
[23:25:06] <Lcvette> :O
[23:27:54] * Lcvette uploaded an image: lathe_chuck_stock.PNG (755KB) < https://matrix.org >
[23:28:14] <hazzy-m> whoa! Nice!
[23:28:38] <Lcvette> it gotsta be nice homie
[23:28:45] <Lcvette> its the probe basic lathe yo
[23:28:58] <Lcvette> :D
[23:29:20] <hazzy-m> hahaha
[23:30:24] <Lcvette> there is a list still on the glo board
[23:30:53] <Lcvette> i have been adding as i go anything i found on the mill gui
[23:31:15] <Lcvette> and anything anyone noted in here
[23:53:45] * Lcvette uploaded an image: Screenshot_2018-12-24_23-53-19.png (190KB) < https://matrix.org >
[23:54:14] <hazzy-m> Great!