#hazzy | Logs for 2018-12-25

Back
[01:34:12] <Lcvette> hahahaha
[01:35:07] * Lcvette uploaded an image: All Lathe Tools.PNG (1203KB) < https://matrix.org >
[01:35:20] * Lcvette uploaded an image: lathe_tools_backside.PNG (1028KB) < https://matrix.org >
[01:40:49] * Lcvette uploaded an image: lathe_tools_backside.PNG (939KB) < https://matrix.org >
[01:43:35] * Lcvette uploaded an image: lathe_tools_topside.PNG (1035KB) < https://matrix.org >
[09:48:01] -!- Roguish has joined #hazzy
[10:56:16] <hazzy-m> nice tools Lcvette
[10:56:22] <hazzy-m> Morning
[10:56:39] <hazzy-m> and merry christmas!
[10:58:19] <Lcvette> morning Hazzy! Merry Christmas!
[10:58:21] <Lcvette> thanks!
[10:58:37] <Lcvette> im compiling them all now and preparing to turn them each into buttons
[11:04:13] <hazzy-m> Nic!
[11:22:31] <Roguish> HAPPY HOLIDAZE !!!!!!!
[11:24:11] <Lcvette> merry Xhristmas!
[11:24:14] <Lcvette> C
[11:24:30] <Lcvette> happy Festivus!
[11:24:45] * Lcvette uploaded an image: Screenshot_2018-12-25_11-23-40.png (212KB) < https://matrix.org >
[11:52:58] * Lcvette uploaded an image: Screenshot_2018-12-25_11-52-36.png (212KB) < https://matrix.org >
[11:56:41] * Lcvette uploaded an image: Screenshot_2018-12-25_11-52-36.png (212KB) < https://matrix.org >
[15:28:46] <TurBoss> hello
[15:29:03] <hazzy-m> Hey
[15:38:05] -!- JT-QtPyVCP has quit [Quit: Leaving]
[15:44:59] -!- JT-QtPyVCP has joined #hazzy
[15:47:04] <JT-QtPyVCP> the vcp plugins don't show up in designer the libpyqt5... files are in the right place https://paste.ubuntu.com
[15:47:07] <JT-QtPyVCP> any clues?
[15:49:03] <JT-QtPyVCP> qtpyvcp -h works and the designer launch script returns this https://paste.ubuntu.com
[15:51:12] <TurBoss> could yo try to move libpyqt5.so.old to home temporally?
[15:51:34] <jthornton> ok
[15:54:18] <JT-QtPyVCP> same result no vcp stuff
[15:55:24] <TurBoss> :(
[15:55:27] <JT-QtPyVCP> if I open brender I get a lot of errors
[15:56:13] <JT-QtPyVCP> https://paste.ubuntu.com
[16:00:40] <TurBoss> I'm having trouble with loding this python comp
[16:01:02] <TurBoss> http://dpaste.com
[16:01:05] <JT-Shop2> I'm trying to learn how to use a skew chisel
[17:09:44] -!- Roguish_desk has quit [Remote host closed the connection]
[17:10:04] -!- Roguish_desk has joined #hazzy
[19:52:56] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]
[20:00:44] <TurBoss> Hola!
[20:40:06] * TurBoss uploaded a video: 20181226_023909.mp4 (32788KB) < https://matrix.org >
[20:40:53] <TurBoss> hurray
[20:42:51] * TurBoss uploaded a video: VectorVideo_2018-12-26_024233.mp4 (4565KB) < https://matrix.org >
[20:44:36] <TurBoss> it works if I run halcmd loaduser -W mpg_dro.py with lcnc running
[20:45:06] <TurBoss> but doesn't load from the INI custom_postgui
[21:22:03] <TurBoss> does open button exist¿
[21:25:05] <hazzy-m> open button for loading gcode?
[21:25:36] <TurBoss> yes
[21:25:49] <TurBoss> lol Qtdesigner plots path while cnc running
[21:26:06] <TurBoss> and reload
[21:26:06] <hazzy-m> yes, it is a dialog, so you can use the DialogButton
[21:26:12] <TurBoss> ok!
[21:26:13] <hazzy-m> LOL
[21:26:53] * TurBoss uploaded an image: image.png (13KB) < https://matrix.org >
[21:27:07] <hazzy-m> the dialog is called open_file
[21:27:17] <hazzy-m> haha
[21:29:03] <TurBoss> hazzy: that works like a charm
[21:29:09] <TurBoss> how can I reload the file?
[21:31:39] * hazzy-m is glad to hear something works
[21:31:40] <hazzy-m> xD
[21:31:50] <TurBoss> yes nothing broke
[21:31:53] <TurBoss> or yes...
[21:32:07] <TurBoss> custom_postgui.hal doesn't load
[21:32:12] <TurBoss> its on INI :P
[21:32:17] <hazzy-m> :(
[21:32:39] <TurBoss> but If I load the module by hand after run lcnc it works!
[21:32:41] <TurBoss> hurray!
[21:32:49] <hazzy-m> I seems like there might be a race condition sicne it loads after LCNC is up and running
[21:33:17] <hazzy-m> you could add a time.sleep() in the file
[21:33:18] <hazzy-m> LOL
[21:33:28] <TurBoss> hmmm
[21:33:32] <TurBoss> not bad lol
[21:34:17] * TurBoss sent a long message: < https://matrix.org >
[21:34:21] <TurBoss> :P
[21:34:32] <hazzy-m> does nothing in the postgui file load, or just your comp?
[21:34:46] <TurBoss> is just my comp
[21:35:17] <hazzy-m> oops, lots of home/kurts in there ...
[21:35:52] <TurBoss> Glenda: who is kurt?
[21:35:58] <Glenda[m]2> I don't understand.
[21:36:06] <TurBoss> as usual
[21:36:09] <hazzy-m> xD
[21:36:32] <TurBoss> Glenda: who is the protagonist of "star gate"?
[21:36:54] <TurBoss> system failure
[21:37:11] <hazzy-m> hehe
[21:37:33] <TurBoss> Glenda: who is the protagonist of escape fron L.A. ?
[21:37:41] <Glenda[m]2> I don't understand.
[21:37:44] <TurBoss> ok
[21:37:46] <TurBoss> i stop
[21:42:27] <TurBoss> ```
[21:42:43] <TurBoss> INI
[21:42:44] <TurBoss> [HAL]
[21:42:44] <TurBoss> POSTGUI_HALFILE = postgui_call_list.hal
[21:43:26] * TurBoss sent a long message: < https://matrix.org >
[21:45:56] <TurBoss> there is something not fired bu qtpyvcp
[21:46:06] <TurBoss> tha enables the postgui
[21:46:14] <TurBoss> I'll check axis
[21:47:42] <TurBoss> https://github.com
[21:48:25] <TurBoss> hazzy: qtpyvcp is missing that
[21:48:29] <TurBoss> res = os.spawnvp(os.P_WAIT, "halcmd", ["halcmd", "-i", vars.emcini.get(), "-f", postgui_halfile])
[21:49:06] <hazzy-m> oh!
[21:49:09] <hazzy-m> Great find!
[21:49:26] <hazzy-m> I thought it was laoded int he linuxcnc start script
[21:49:34] <TurBoss> didn't know
[21:49:39] <TurBoss> just found it
[21:49:56] <hazzy-m> hurray, should be an easy thing to fix!
[21:50:08] <TurBoss> https://github.com
[21:50:14] <TurBoss> great Thanks
[22:16:10] <Lcvette> hurray!
[22:16:12] <Lcvette> Merry CHristmas!
[22:16:24] <TurBoss> HAPPY xmas
[22:25:54] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±2] 13https://gitlab.com/Hazzy/qtpyvcp/compare/84502b162c0283b71314f24c3eafbb9db63d3c1e...3867ce0dbc8cfa7f7127f14786ff4e2740db0fcb
[22:25:55] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson 033867ce0 - load postgui halfile if one is specified
[22:32:47] <Lcvette> hurray!
[22:32:54] <TurBoss> Thanks!
[22:33:11] <hazzy-m> Not tested
[22:35:58] * TurBoss sent a long message: < https://matrix.org >
[22:40:58] <TurBoss> https://youtu.be
[22:59:24] <hazzy-m> Hmmm
[22:59:36] <TurBoss> res = os.spawnvp(os.P_WAIT, "halcmd",
[22:59:37] <TurBoss> ["halcmd", "-i", "-f", postgui_halfile])
[22:59:42] <TurBoss> res = os.spawnvp(os.P_WAIT, "halcmd", ["halcmd", "-i", vars.emcini.get(), "-f", postgui_halfile])
[22:59:49] <TurBoss> not the same
[23:00:00] <TurBoss> ["halcmd", "-i", vars.emcini.get(), "-f", postgui_halfile
[23:00:09] <TurBoss> ["halcmd", "-i", "-f", postgui_halfile]
[23:00:23] <hazzy-m> I don't know what bars.emcini is :(
[23:00:35] <TurBoss> the whole ini?
[23:00:56] <hazzy-m> Maybe ...
[23:01:00] <TurBoss> duno...
[23:01:07] <TurBoss> investigating
[23:03:01] <TurBoss> https://github.com
[23:04:06] <TurBoss> can you that run on RIP hack AXIS to print that?
[23:07:33] * Lcvette uploaded an image: Screenshot_2018-12-25_23-07-06.png (219KB) < https://matrix.org >
[23:07:52] <TurBoss> whoa!
[23:07:56] <TurBoss> cool!
[23:08:40] <TurBoss> inifile = linuxcnc.ini(sys.argv[2])
[23:08:51] <Lcvette> I am going to need some help before i go much further i think with this, the way it works is a bit complex
[23:08:55] <TurBoss> vars.emcini.set(sys.argv[2])
[23:09:16] <TurBoss> Lcvette: how can I help?
[23:09:50] <Lcvette> https://www.youtube.com
[23:09:58] * TurBoss sent a long message: < https://matrix.org >
[23:10:00] <Lcvette> see how it works in the video
[23:10:04] <TurBoss> ok
[23:10:22] <TurBoss> ?
[23:10:24] <TurBoss> too long
[23:10:33] <Lcvette> when you press one of the tools, they all disappear and the tool you pressed appears near the lathe chuck
[23:11:07] <TurBoss> oh
[23:11:33] <TurBoss> I could do that in QML
[23:11:46] <TurBoss> a big widget for that
[23:11:56] <Lcvette> go to 20:00 minute mark and watch for like 2 minutes
[23:12:24] <TurBoss> is avid about fusion?
[23:12:33] <Lcvette> about PP
[23:12:44] <TurBoss> no
[23:12:44] <Lcvette> and how the tool offset setting works
[23:12:58] <TurBoss> Everything I Know About Taps & Thread Milling — Fusion 360 CAM Tutorial — #LarsLive 128
[23:13:12] <Lcvette> oh thats wierd
[23:14:02] <Lcvette> https://youtu.be
[23:14:10] <TurBoss> aha
[23:14:20] <Lcvette> not sure how that happened
[23:15:19] <TurBoss> ok I see
[23:15:26] <TurBoss> Could be done
[23:16:31] <Lcvette> Want sure if it was a signals and slots thing
[23:16:43] <TurBoss> ?
[23:16:43] <Lcvette> That would be alot of connections
[23:16:59] <TurBoss> I don't get last one
[23:17:03] <Lcvette> Wasn't
[23:17:19] <TurBoss> oh ok
[23:17:25] <Lcvette> The way it would be done
[23:17:32] <Lcvette> But you said qml
[23:17:45] <TurBoss> one big widget with all the tools drawn in it
[23:17:59] <TurBoss> on click hide others and move to postion
[23:19:42] <Lcvette> Cool
[23:19:51] <Lcvette> Right now I have all the tools in widget boxes
[23:19:55] <TurBoss> if hazzy has a better Idea?
[23:20:25] <TurBoss> can you send me de media ?
[23:20:46] <Lcvette> Media?
[23:21:06] <TurBoss> the pics
[23:21:12] <Lcvette> Ah
[23:21:17] <Lcvette> Yes I'll push
[23:21:45] <Lcvette> Give! A few minutes to finish making adjustments
[23:21:53] <TurBoss> sure
[23:23:00] <Lcvette> Is difficult getting everything aligned just so with individual tools. Currently they are all action buttons with no background or border
[23:23:27] <TurBoss> how I should name this widget?
[23:23:49] <TurBoss> lathe_tools_widget?
[23:24:06] <Lcvette> Lathe tool touch off
[23:24:09] <TurBoss> ok
[23:25:39] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±1] 13https://gitlab.com/Hazzy/qtpyvcp/compare/3867ce0dbc8cfa7f7127f14786ff4e2740db0fcb...9658efafef7cb52cc8fbec985e5a7138d8b1f687
[23:25:41] <Not-97e5> [02QtPyVCP] 07Kurt Jacobson 039658efa - fix loading of postgui HAL file
[23:25:59] <hazzy-m> TurBoss: Thanks!
[23:26:16] <TurBoss> to you
[23:26:18] <TurBoss> :)
[23:26:39] <TurBoss> testinh
[23:28:04] <TurBoss> hazzy: oops!
[23:28:09] <TurBoss> it doesnt work
[23:28:22] <TurBoss> what you passing the file or the path?
[23:28:30] <TurBoss> seems that should be the path
[23:33:53] <Lcvette> pushed
[23:35:19] <TurBoss> thanks
[23:35:54] <Lcvette> i have not yet made the dimension lines that go to the spindle and tool yet
[23:36:18] <Lcvette> i figured i better ask you guys what this will need before i progressed much further
[23:39:16] <TurBoss> Lcvette: lathe_chuck_stock need click?
[23:39:25] <Lcvette> no
[23:39:25] <TurBoss> needs?
[23:39:27] <TurBoss> okay
[23:50:24] <Lcvette> before you go too far, did you watch the video a little ways to see what else is connected?
[23:51:09] <Lcvette> should i know i will need to make a control point diagram indicator, as well as the touch off boxes for x and z axis
[23:51:23] <Lcvette> and those will be connected to the offsets table and tool table possibly
[23:51:29] <Lcvette> still trying to wrap my head around it