#hazzy | Logs for 2018-12-26

Back
[00:03:49] <TurBoss> I'm drafting
[00:04:42] <Lcvette> ok
[00:06:45] * TurBoss uploaded an image: image.png (124KB) < https://matrix.org >
[00:07:12] <TurBoss> looks okish?
[00:07:20] <Lcvette> does it need that?
[00:07:25] <Lcvette> they are already buttons
[00:07:26] <TurBoss> whats that?
[00:07:46] <TurBoss> sek
[00:07:48] <TurBoss> I'll show
[00:07:50] <TurBoss> in 10 min
[00:08:03] <Lcvette> i saying the images are buttons
[00:08:09] <TurBoss> yes
[00:08:14] <Lcvette> already
[00:08:18] <Lcvette> i made them buttons
[00:08:28] <TurBoss> yes but I can't work with buttons
[00:08:33] <Lcvette> oh ok
[00:08:34] <TurBoss> this is like the ATC
[00:08:43] <TurBoss> its a draft
[00:08:47] <Lcvette> ok
[00:50:41] * TurBoss uploaded a video: Peek 26-12-2018 06-50.webm (26KB) < https://matrix.org >
[00:50:54] <TurBoss> something like that?
[00:53:24] <Lcvette> do the graphics lose their resolution?
[00:54:14] <Lcvette> doesn't need animmation
[00:54:21] <Lcvette> just pop to position
[00:54:40] <Lcvette> definitely do not want to lose resolution of the graphics though
[00:55:10] <Lcvette> but not sure if its the peek video or the actual finished result
[00:55:49] <TurBoss> booo spent all the time with the animation
[00:56:24] <Lcvette> its great so long as resolution doesn't suffer
[00:56:41] * TurBoss uploaded an image: Peek 26-12-2018 06-56.gif (74KB) < https://matrix.org >
[00:58:35] <Lcvette> you say you spoent all the time on animation, but do you know how much time i have invested in modeling and layout
[00:58:35] <Lcvette> lol
[00:58:47] <Lcvette> lighting dynamics
[00:58:55] <Lcvette> sizing
[00:59:01] <Lcvette> exporting
[00:59:05] <Lcvette> cropping
[00:59:21] <TurBoss> aI'm just playing with your pics
[00:59:21] <TurBoss> :D
[00:59:55] <Lcvette> :D
[01:05:55] * TurBoss uploaded a video: Peek 26-12-2018 07-05.webm (30KB) < https://matrix.org >
[01:06:51] <Lcvette> cool
[01:07:00] <Lcvette> you have not answered me about the image resolution
[01:07:04] <Lcvette> is it affected?
[01:07:12] <TurBoss> yes
[01:07:16] <TurBoss> I should change
[01:07:30] <Lcvette> yeah
[01:07:36] <Lcvette> they need to be high resolution
[01:07:43] <hazzy-m> TurBoss: Whoa! That is awesome!
[01:07:56] * hazzy-m needs to sleep
[01:07:58] <hazzy-m> gn8
[01:08:00] <TurBoss> n8
[01:08:09] <Lcvette> night hazzy
[01:08:11] <TurBoss> Lcvette: let me play abit more
[01:08:33] <TurBoss> then you can made the fine tuning
[01:08:43] <Lcvette> what is making the resolution low?
[01:08:53] <Lcvette> copied images?
[01:08:57] <TurBoss> no the same
[01:09:03] <Lcvette> screen capture?
[01:09:20] * TurBoss uploaded an image: image.png (94KB) < https://matrix.org >
[01:09:36] <TurBoss> are they okish?
[01:09:45] <Lcvette> no
[01:09:48] <Lcvette> horrible
[01:10:21] <Lcvette> look how clean they are in the gui
[01:10:33] <Lcvette> sharp defined edges
[01:10:59] <TurBoss> hmmm
[01:12:15] <Lcvette> some of the tools are stretched funny here too
[01:14:51] <Lcvette> what you made is awesome, but the graphics quality needs to be as high as i painstakingly worked to keep it getting it into the gui
[01:15:17] <TurBoss> when I finish I let your hands do its magic
[01:15:18] <TurBoss> ok?
[01:15:44] <Lcvette> how?
[01:15:49] <TurBoss> magic
[01:15:55] <TurBoss> easy!
[01:17:45] <Lcvette> easy is not an explanation
[01:17:47] <Lcvette> lol
[01:18:01] <Lcvette> magic is not a skill i possess
[01:18:08] <Lcvette> :(
[01:18:14] <TurBoss> magick-fu
[01:18:16] <TurBoss> lol
[01:18:23] <TurBoss> with qtcreator
[01:18:34] <Lcvette> i don't know qtcreator
[01:18:43] <TurBoss> its the same as designer
[01:20:25] <Lcvette> its ok
[01:20:29] <Lcvette> i will figure sanother way
[01:23:11] * TurBoss uploaded an image: Captura de pantalla_2018-12-26_07-22-43.png (343KB) < https://matrix.org >
[01:24:32] <Lcvette> what did you do take a screen capture and import it?
[01:25:00] <TurBoss> use the same files you uploaded
[01:28:15] <Lcvette> oh well
[01:28:28] <Lcvette> i will just make a stationary design
[01:28:57] <Lcvette> if that software distrorts the grpahics its nto worth much
[01:29:54] <TurBoss> I'll fix
[01:30:24] <Lcvette> if you used my grpahics files how can you?
[01:30:33] <Lcvette> its making them grainy
[01:30:43] <Lcvette> jagged around the edges
[01:31:29] <Lcvette> that seems like its in the way the software proicesses the images
[01:31:49] <TurBoss> its because they are shown as the half of their size
[01:31:50] <TurBoss> or more
[01:32:03] <TurBoss> I'll fix it latter
[01:32:20] <TurBoss> they will look nice I promess
[01:32:24] <Lcvette> lol
[01:32:40] <Lcvette> turboss rocks
[01:32:45] <TurBoss> hurray!
[01:32:48] <Lcvette> hurray
[01:35:20] * Lcvette uploaded an image: Screenshot_2018-12-26_01-34-41.png (115KB) < https://matrix.org >
[01:35:36] <TurBoss> looks nice
[01:35:40] <TurBoss> not like mine :P
[01:35:46] <TurBoss> xD
[01:35:54] <Lcvette> thats just a screen capture
[01:36:06] <TurBoss> I don't know how went that bad
[01:37:04] <Lcvette> me either but im guessing the ATC is the same?
[01:37:14] <TurBoss> could b
[01:37:16] <TurBoss> e
[03:21:56] * Lcvette uploaded an image: lathe_control_point.PNG (67KB) < https://matrix.org >
[03:28:21] <Not-97e5> [02QtPyVCP] 07TurBoss pushed 031 commit to 03master [+0/-0/±2] 13https://gitlab.com/Hazzy/qtpyvcp/compare/9658efafef7cb52cc8fbec985e5a7138d8b1f687...a15fcf30f94bf7ee67f31215a067a20debb741a9
[03:28:22] <Not-97e5> [02QtPyVCP] 07TurBoss 03a15fcf3 - fix postgui loading
[06:15:29] <jthornton> morning
[07:11:44] <TurBoss> morning
[07:54:42] <TurBoss> alpha version :
[07:54:57] * TurBoss uploaded a video: Peek 26-12-2018 13-50.webm (106KB) < https://matrix.org >
[08:04:24] <jthornton> cool
[10:15:53] -!- Roguish has joined #hazzy
[10:22:52] <hazzy-m> TurBoss: Sweet!!!
[10:51:57] <hazzy-m> TurBoss: You fixed the post GUI file, hurray!!!
[10:57:35] <TurBoss> yes
[10:57:42] <TurBoss> hurray!!!
[11:18:59] -!- JT-QtPyVCP has quit [Read error: Connection reset by peer]
[11:19:39] -!- JT-QtPyVCP has joined #hazzy
[11:32:20] <Lcvette> hurrray
[11:37:50] <JT-QtPyVCP> any thoughts on where I might look to see why the qtpyvcp widgets don't show up in designer but they are in the correct directory
[11:45:54] <hazzy-m> JT-QtPyVCP: are you on debian stretch?
[11:46:05] <JT-QtPyVCP> yea
[11:46:19] <hazzy-m> how are you launching designer?
[11:46:24] <hazzy-m> editvcp?
[11:46:24] <JT-QtPyVCP> uname -a
[11:46:24] <JT-QtPyVCP> Linux mesa-eth 4.9.0-8-rt-amd64 #1 SMP PREEMPT RT Debian 4.9.110-3+deb9u6 (2018-10-08) x86_64 GNU/Linux
[11:46:37] <JT-QtPyVCP> ./launch_designer.something
[11:46:52] <JT-QtPyVCP> john@mesa-eth:~/qtpyvcp/scripts$ ./launch_designer.sh
[11:46:52] <hazzy-m> try editvcp
[11:46:57] <JT-QtPyVCP> ok
[11:47:58] <JT-QtPyVCP> https://paste.ubuntu.com
[11:48:39] <hazzy-m> hmmm, it can't find the yml file
[11:48:53] <JT-QtPyVCP> tried mini as well https://paste.ubuntu.com
[11:48:58] <hazzy-m> can you edit mini?
[11:48:59] <hazzy-m> editvcp mini
[11:49:27] <JT-QtPyVCP> no, see the last paste
[11:49:41] <hazzy-m> thanks
[11:50:37] <hazzy-m> what does qtpyvcp -v say?
[11:51:22] <JT-QtPyVCP> QtPyVCP v0.1.4
[11:51:49] <hazzy-m> ok, that is the problem!
[11:52:13] <hazzy-m> you don't have the latest version, I have fixed that bug since v0.1.4
[11:52:21] <JT-QtPyVCP> ok
[11:52:29] <hazzy-m> can you run pip uninstall qtpyvcp
[11:52:59] <hazzy-m> then from your qtpyvcp source dir run:
[11:53:07] <hazzy-m> pip install -e .
[11:53:21] <hazzy-m> then run qtpyvcp -v again
[11:53:47] <hazzy-m> it should be soemthing like QtPyVCP v0.1.4+23.ga15fcf30
[11:54:26] <JT-QtPyVCP> QtPyVCP v0.1.4+20.g84502b1
[11:54:42] <hazzy-m> perfect, that should be fine
[11:56:45] <JT-QtPyVCP> https://paste.ubuntu.com
[11:57:38] <hazzy-m> Ok, now it looks like your are running LCNC2.7 instead of 2.8
[11:58:34] <hazzy-m> actualy, you are running 2.8
[11:58:40] <JT-QtPyVCP> 2.8.0-pre1-g42d0b443d
[11:58:47] <hazzy-m> but a version from before the MultiSpindle was merged
[11:59:19] <JT-QtPyVCP> ah yea this would be an older version as I have no clue when I built this drive lol
[11:59:31] <JT-QtPyVCP> I'll just start fresh during free time tomorrow
[11:59:50] <hazzy-m> that is from Aug 2nd
[12:00:29] <hazzy-m> Hurray! At least I think your qtpyvcp problems are resolved!!
[12:01:57] <jthornton> looks like it's time for a new washer :(
[12:03:55] <hazzy-m> I have a friend that has some kick start maytags, if you need one ...
[12:04:19] <jthornton> kick start?
[12:04:34] <hazzy-m> yeah, lol. the old gas engine powered ones
[12:04:52] <jthornton> wow with the hit and miss engine?
[12:05:16] <jthornton> mine the drum bearing is going out so super noisy during spin cycle
[12:05:29] <hazzy-m> not sure if they were hit-n-miss or a two stroke
[12:05:50] <hazzy-m> he has a bunch of them, pretty neat things
[12:06:37] <hazzy-m> put the old lathe bearings in the washer :D
[12:08:00] * hazzy-m got a call to fix a garage door, and its way out of town :(
[12:08:00] <hazzy-m> bbl
[12:38:16] * Lcvette uploaded an image: lathe_control_point.PNG (141KB) < https://matrix.org >
[15:17:26] * Lcvette uploaded an image: Screenshot_2018-12-26_15-17-08.png (242KB) < https://matrix.org >
[15:29:05] <Lcvette> getting closer!
[15:29:08] <Lcvette> :D
[15:29:11] <Lcvette> hurray!!
[15:31:04] <Lcvette> pushed updates
[15:44:24] <hazzy-m> Lcvette: That sure looks sharp!
[15:44:38] <Lcvette> thx
[15:45:51] <Lcvette> i tried for a few hours to figure out how to make the image graphics change the same color as the buttons so just the icons would change, but ultimately i couldn't figure out how to copy the same gradient from qtdesigner into either gimp or inkscape to modify the png graphic for them
[15:45:52] <Lcvette> :(
[15:46:14] <Lcvette> so i just made the background change color for the control point selection mode
[16:42:39] * Lcvette uploaded an image: lathe_chuck_dim_lines.PNG (2629KB) < https://matrix.org >
[17:48:19] <hazzy-m> You can change the image that is shown in QSS depending on the button state
[17:48:45] <hazzy-m> for example show one image if the button is checked, and another if it is not checked
[17:49:56] <Lcvette> yes i saw that, that is also in the designer property manager
[17:50:46] <Lcvette> but getting the gradient button color onto the image file before compiling it is where i am not sure how to proceed
[17:50:56] <Lcvette> either way, not a big deal, this works fine
[17:51:29] * Lcvette uploaded an image: lathe_chuck_dim_lines.PNG (5542KB) < https://matrix.org >
[18:00:04] * Lcvette uploaded an image: Screenshot_2018-12-26_17-59-42.png (240KB) < https://matrix.org >
[18:00:15] <TurBoss> Hey
[18:00:35] <Lcvette> turboss! hurrray!
[18:00:52] <Lcvette> i think i understand what you said yesterday now
[18:00:54] <TurBoss> I have not figured yet how to show high res images on the tool touch anims
[18:01:05] <Lcvette> you need me to make all the files the correct scale
[18:01:13] <Lcvette> ah
[18:01:31] <TurBoss> what I did say?=
[18:01:46] <Lcvette> thought you said the files needed to be the correct scale
[18:01:54] <TurBoss> oh
[18:02:05] <Lcvette> i just did that for this last one in gimp
[18:02:17] <TurBoss> they show fine?
[18:02:20] <Lcvette> i rescaled it so that it did not require a scaled button be checked
[18:02:32] <Lcvette> they always show fine in the gui
[18:02:38] <TurBoss> oh great!!!
[18:02:42] <Lcvette> but not after they get animated
[18:02:43] <TurBoss> fantastic I can't wait to test
[18:02:55] <TurBoss> hmmm
[18:03:06] <TurBoss> I was thinking to make one last test
[18:03:13] <TurBoss> can you export to svg=
[18:03:13] <TurBoss> ?
[18:03:21] <TurBoss> aka vector graphics?
[18:03:40] <TurBoss> just one
[18:03:41] <Lcvette> maybe, let me check
[18:03:51] <TurBoss> not from gimp
[18:03:59] <TurBoss> from your design tool
[18:04:08] <TurBoss> ty!
[18:06:17] <TurBoss> if much throuble doesn't matter
[18:06:44] <Lcvette> no toruble
[18:07:19] <TurBoss> meanwhile I'm searchim for my usb
[18:08:05] * Lcvette uploaded an image: image.png (35KB) < https://matrix.org >
[18:08:08] <TurBoss> found it
[18:08:11] <Lcvette> save options
[18:08:41] <TurBoss> can't see any vector in there
[18:08:44] <TurBoss> doesn't matter
[18:08:46] <Lcvette> don't see svg
[18:08:53] <TurBoss> if you have the resized images
[18:09:17] <TurBoss> can you send me one?
[18:09:47] <TurBoss> the drill is the most exagerated
[18:09:50] <TurBoss> it fails the most
[18:11:36] * Lcvette uploaded an image: lathe_chuck_dim_lines.png (72KB) < https://matrix.org >
[18:11:48] <Lcvette> i just did this one so far
[18:11:57] <Lcvette> it is scaled correctly for the box it is in
[18:12:11] <Lcvette> just pushed the latest changes too
[18:12:39] <TurBoss> sucking updates
[18:16:59] * Lcvette uploaded an image: lathe_internal_drilling_ts.svg (59KB) < https://matrix.org >
[18:17:22] <Lcvette> i saved that from within inkscape as svg
[18:18:20] <TurBoss> thanks
[18:23:19] <TurBoss> the holder worked like acharm
[18:23:26] <TurBoss> the drill doesn't
[18:23:32] <TurBoss> svg not good
[18:23:33] <TurBoss> :P
[18:24:02] * TurBoss uploaded an image: image.png (74KB) < https://matrix.org >
[18:24:07] <Lcvette> the chucks?
[18:24:12] <Lcvette> thats perfect
[18:24:19] <Lcvette> ok
[18:24:26] <Lcvette> let me try a tool now and see if that works
[18:24:34] <TurBoss> okish!
[18:24:43] <Lcvette> flawless
[18:24:55] <TurBoss> that means good?
[18:24:58] <Lcvette> yes
[18:25:02] <TurBoss> great!
[18:25:08] <Lcvette> see the circle
[18:25:13] <Lcvette> no jagged lines
[18:25:21] <TurBoss> 0 pixelated
[18:25:24] <Lcvette> correct
[18:25:28] <Lcvette> excellent!
[18:25:36] <TurBoss> I won't last much long
[18:25:50] <TurBoss> tomorrow I have to wake early
[18:25:53] <Lcvette> but i wonder now, i think i did save it as a higher resolution from solidworks this time
[18:26:01] <Lcvette> maybe i need to go back and do them all the same?
[18:26:10] <TurBoss> hmmmm
[18:26:17] <Lcvette> but let me try a existing file scaled first befopre i do all that
[18:26:23] <TurBoss> sure
[18:26:34] <TurBoss> you must learn QML :P
[18:26:39] <TurBoss> is really fun
[18:27:07] <Lcvette> you are qml, i am graphics and layout, hazzy is is coding and you are coeding support
[18:27:07] <TurBoss> allows you to do some black magick
[18:27:20] <TurBoss> lol
[18:27:21] <TurBoss> ok
[18:35:42] * Lcvette uploaded an image: lathe_lh_turning_fp_ts.png (3KB) < https://matrix.org >
[18:35:56] <TurBoss> cool
[18:36:09] <Lcvette> wow, its very small file size now
[18:36:56] <Lcvette> if that doesn't work i will resave them all in higher eesolution from solidworks and redo everything
[18:39:10] <TurBoss> looks ok but I need to change some thing to see it better
[18:39:46] <jthornton> sweet I got my chicken program to start at bootup... wow that took a while to sort out
[18:40:46] <Lcvette> nice JT
[18:40:50] <Lcvette> sweet turboss
[18:40:57] <Lcvette> let me see
[18:47:03] * TurBoss uploaded an image: image.png (5KB) < https://matrix.org >
[18:47:05] <TurBoss> versus
[18:47:22] <TurBoss> its ok?
[18:47:42] <Lcvette> much better!!!!
[18:47:51] <Lcvette> ok i will change them all out
[18:48:27] * TurBoss uploaded an image: image.png (7KB) < https://matrix.org >
[18:48:31] <TurBoss> thanks
[18:48:37] <TurBoss> I'll go to bet
[18:48:39] <TurBoss> nigh
[18:48:40] <TurBoss> t
[18:51:27] * TurBoss uploaded an image: image.png (109KB) < https://matrix.org >
[19:12:45] <Lcvette> definitely tell a major difference in quality!
[19:13:06] <Lcvette> OK JUST PUSHED THE REVISED RESIZED GRAPHICS UPDATE
[19:13:15] <Lcvette> whoops sorry for the caps
[19:30:05] <hazzy-m> great work guys!
[19:37:01] <Lcvette> hurray!
[20:49:49] <Lcvette> The wireless mpg just arrived, I'm thoroughly impressed with fittest impressions after opening the box, nicely packaged, it feels very sturdy, has good weight to it, has a great fitting protective cover, the m pig wheel feels extremely nice, not chinsey like my other USB wireless version.
[21:58:55] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]
[22:19:52] <hazzy-m> excellent!
[23:14:57] <Lcvette> Yeah now I gotta figure the Hal setup
[23:15:17] <Lcvette> This one has to be wired pin to pin
[23:15:42] <Lcvette> Can't do the trick you did
[23:35:00] <hazzy-m> Why?
[23:35:26] <hazzy-m> does in not give you the individual outputs from the switches?
[23:43:19] <Lcvette> I was told I should not do it that way with the box
[23:48:01] <Lcvette> Not sure why
[23:48:12] <Lcvette> Probably no good reason