#hazzy | Logs for 2019-01-02

Back
[05:47:58] <jthornton> if you add machine.jog.axis:x,pos to a button it disables it then it does not enable until you home
[05:48:05] <jthornton> morning
[06:22:56] <TurBoss> morning
[06:59:38] * TurBoss uploaded a video: 20190102_105123.mp4 (44189KB) < https://matrix.org >
[08:54:20] <TurBoss> Lcvette: morning, did you manage to print the labels?
[10:08:35] -!- Roguish has joined #hazzy
[10:31:02] <TurBoss> is hazzy awake?
[10:31:05] <TurBoss> good morning
[10:35:36] <jthornton> I wonder if hazzy-m is going to try again today to get out of town?
[10:41:05] <TurBoss> https://github.com
[10:41:29] <TurBoss> I did a path optimization tool :D using the line equation
[10:41:54] <TurBoss> it works with some numbers but doesn't with the real data
[10:44:09] <TurBoss> i placed a test function that runs on start
[10:45:43] <TurBoss> I'm wrong is not the line equation
[10:45:44] <TurBoss> :D
[10:46:06] <hazzy-m> jthornton yep, just heading over to were our van is stuck with a truck to try and pull it out
[10:47:49] <TurBoss> good luck
[10:48:29] <JT-Shop2> good luck
[10:48:45] <TurBoss> https://brilliant.org
[10:49:15] <TurBoss> > I'm wrong is not the line equation
[10:49:16] <TurBoss> its the 3d equation of the line
[11:51:12] <TurBoss> I'm having noise issues when I touch the frame of my machine with something metalic
[11:51:41] <TurBoss> motor steps for a bit
[11:51:56] <TurBoss> also if I touch the pc box
[11:52:05] <TurBoss> allways with something metallic
[11:52:10] <TurBoss> like a srewdriver
[11:54:48] <TurBoss> I should share ground betwen the computer the electronics box and the machine frame?
[13:23:52] <JT-Shop> everything should have a common ground and any shielded wire drain connected on one end only
[13:26:53] <TurBoss> ok thanks
[13:59:14] <TurBoss> JT: you asked about action buttons not joging until homed?
[14:09:27] <Not-e6c6> [02QtPyVCP] 07TurBoss created branch 03jog_button
[14:09:50] <TurBoss> I createdd a branch ready for testing
[14:09:55] <TurBoss> works fine here
[14:13:27] <TurBoss> jog was posible with keyboard or external control
[14:16:20] <Lcvette> do you guys use a VPN on lniux?
[14:16:30] <TurBoss> yes
[14:16:33] <TurBoss> openvpn
[14:16:52] <TurBoss> but others work
[14:16:55] <Lcvette> sudo apt get install openvpn
[14:17:00] <Lcvette> ?
[14:17:00] <TurBoss> what kind of vpn ?
[14:17:33] <TurBoss> ipsec, openvpn, l2pt=
[14:17:35] <TurBoss> ?
[14:17:45] <Lcvette> no clue
[14:17:58] <TurBoss> you need to know that
[14:18:11] <TurBoss> every kind requieres a setup
[14:18:40] <Lcvette> what do i need to know?
[14:18:46] <TurBoss> what do you have?
[14:18:52] <TurBoss> a config files?
[14:19:04] <Lcvette> i don't know what any of those things you listed are
[14:19:26] <TurBoss> they are types of vpn
[14:19:32] <Lcvette> ipsec, openvpn, l2pt=
[14:19:42] <TurBoss> there are more
[14:20:04] <TurBoss> I use and provide my own vpn using openvpn
[14:20:28] <TurBoss> but in your case could change
[14:20:47] <Lcvette> very confusng
[14:21:29] <TurBoss> what do you have to connect to the vpn? config files? some ip addres?
[14:21:41] <TurBoss> you used to work on windows?
[14:21:41] <Lcvette> internet
[14:21:49] <TurBoss> hihihi
[14:22:36] <TurBoss> in my case I need a certificate a key and a config file + user//pass
[14:23:40] <Lcvette> do i need that too?
[14:23:46] <TurBoss> no
[14:23:58] <TurBoss> if you are using another kinf
[14:24:00] <TurBoss> *kind
[14:24:23] <Lcvette> im not using anything currently, im aSKING SO I CAN BETTER PROTECT MYSELKF
[14:24:27] <Lcvette> sorry
[14:24:31] <TurBoss> ah
[14:24:44] <TurBoss> you may need to buy some service over the internet
[14:25:11] <Lcvette> ah
[14:25:20] <TurBoss> I don't know any provider
[14:25:48] <TurBoss> are you hidding from NSA?
[14:25:50] <TurBoss> :P
[14:26:03] <Lcvette> no
[14:26:06] <Lcvette> lol
[14:26:07] <TurBoss> if not doesn't make sense
[14:26:12] <TurBoss> is overkill
[14:26:44] <Lcvette> how do you setup the room encryption?
[14:26:57] <TurBoss> here
[14:27:13] <TurBoss> no posible
[14:29:34] * Lcvette uploaded an image: image.png (17KB) < https://matrix.org >
[14:29:45] <Lcvette> turboss
[14:30:10] <TurBoss> yo
[14:30:14] <TurBoss> I'm working on that
[14:30:23] <Lcvette> ok
[14:32:22] <TurBoss> Lcvette: can you trust my devices?
[14:32:36] <TurBoss> no I only have 2
[14:32:44] <Lcvette> i dunno can i?
[14:32:45] <Lcvette> lol
[14:32:48] <TurBoss> yes
[14:32:52] <TurBoss> on my profile
[14:32:57] <TurBoss> clickon verify
[14:35:41] <Lcvette> I CLICKED VERIFY
[14:35:48] <Lcvette> caps, sory
[14:36:38] <TurBoss> yo have to remove unused devices from your riot settings
[14:36:49] <TurBoss> and trust the ones you have on hand
[14:37:10] <TurBoss> very tricky
[14:37:35] <TurBoss> I can read you
[17:27:37] <TurBoss> https://youtu.be
[17:59:10] <jthornton> I wonder if hazzy-m got the van unstuck?
[18:02:24] <jthornton> TurBoss: what I did was drag an action button into my vcp then in the actionName I typed in machine.jog.axis.X.pos as soon as I did that the button was no longer enabled
[18:02:44] <jthornton> the button didn't become enabled until I homed the sim
[18:03:03] <TurBoss> i fixed
[18:03:25] <jthornton> ah ok looking at it now, how can I test that locally?
[18:03:36] <TurBoss> yes
[18:03:36] <TurBoss> sek
[18:04:32] <TurBoss> the easies way is to change to the jog_button branch from git
[18:04:46] <jthornton> I see what you did, ok let me try
[18:05:27] <jthornton> STAT.limit[axisnum] is 0 for False and not 0 for True the axis is on a limit switch?
[18:05:31] <TurBoss> yes apply the patch yoursef is easy
[18:05:53] <hazzy-m> Yes, got the van out finally, headed back to Atlanta now
[18:06:05] <TurBoss> hurray!
[18:06:38] <TurBoss> I havent looked at limits
[18:07:09] <JT-QtPyVCP> I program in python so most of it makes sense to me :)
[18:07:24] <JT-QtPyVCP> just trying to catch up to where you guys are at...
[18:10:14] <jthornton> I wonder if I need to do pip install -e . again after switching branches?
[18:10:33] <TurBoss> no
[18:10:41] <TurBoss> -e is for that iirc
[18:12:59] <jthornton> that's what I thought...
[18:16:27] <jthornton> I wonder if it's still using the machine_actions.pyc file instead of the jog branch .py file
[18:16:42] <jthornton> I see your change in machine_actions.py
[18:17:46] <TurBoss> is safe to remove pyc files
[18:18:48] <TurBoss> hazzy: baned pyc on his machine :O
[18:19:00] <TurBoss> duno how
[18:19:19] <jthornton> yea I had to do pip install -e . to get it to refresh
[18:19:53] <TurBoss> again?
[18:19:54] <TurBoss> ok
[18:20:06] <jthornton> anyway it works now as it should so you can merge that to master if you like
[18:20:20] <TurBoss> ok
[18:21:13] <TurBoss> limits is an extras check too
[18:21:19] <TurBoss> if removed is safe too
[18:21:41] <TurBoss> but doesn't do nothing wrong there
[18:22:11] <jthornton> well if you have both positive and negative limit switches you should be able to jog off of the switch :)
[18:22:42] <jthornton> if you only have one limit then like Axis you have to do something extra like click a checkbox to jog off of the limit
[18:24:47] <jthornton> sys.dont_write_bytecode=True stops the pyc files
[18:26:10] <jthornton> echo "PYTHONDONTWRITEBYTECODE=true" >> ~/.bash_profile
[18:28:04] <JT-QtPyVCP> well debian 9 does not have .bash_profile
[18:29:45] <JT-QtPyVCP> hmm echo creates the file :)
[18:30:22] <JT-QtPyVCP> but then that negates the .profile so not good
[18:42:02] -!- JT-QtPyVCP has quit [Remote host closed the connection]
[18:43:29] -!- JT-QtPyVCP has joined #hazzy
[18:56:46] -!- JT-QtPyVCP has quit [Remote host closed the connection]
[19:00:22] <Not-e6c6> [02QtPyVCP] 07TurBoss created branch 03jog_button
[19:00:42] <Not-e6c6> [02QtPyVCP] 07TurBoss created branch 03jog_button
[19:01:15] <Not-e6c6> [02QtPyVCP] 07TurBoss pushed 032 commits to 03master [+0/-0/±2] 13https://gitlab.com/Hazzy/qtpyvcp/compare/5622e9e49132b3a9597ff05511b19fea8d161be6...edc6f5d8abd59fe7fa2d570d67a1fb8ee451217f
[19:01:16] <Not-e6c6> [02QtPyVCP] 07TurBoss 03f99b997 - allow to jog while not homed
[19:01:18] <Not-e6c6> [02QtPyVCP] 07TurBoss 03edc6f5d - Merge branch 'jog_button'
[19:02:23] <Not-e6c6> [02QtPyVCP] 07TurBoss deleted branch 03jog_button
[19:03:12] -!- JT-QtPyVCP has joined #hazzy
[19:04:42] <TurBoss> JT: just merged
[19:05:42] <JT-QtPyVCP> john@mesa-eth:~/qtpyvcp$ git branch
[19:05:42] <JT-QtPyVCP> jog_button
[19:05:42] <JT-QtPyVCP> * master
[19:05:42] <JT-QtPyVCP> john@mesa-eth:~/qtpyvcp$ git pull
[19:05:42] <JT-QtPyVCP> Already up-to-date.
[19:05:55] <JT-QtPyVCP> hmm must take a minute or three...
[19:07:12] <JT-QtPyVCP> yep took a few minutes before it pulled the merge lol
[19:07:25] <TurBoss> great
[19:07:38] <JT-QtPyVCP> and it works! thanks for fixing that
[19:07:44] <TurBoss> np
[19:08:01] <JT-QtPyVCP> hopefully I can join in the fun
[19:08:10] <TurBoss> yeah!
[19:08:20] <TurBoss> you can just write a widget
[19:08:26] <TurBoss> copy some one
[19:08:49] <TurBoss> like the video widget
[19:09:09] <TurBoss> no opencv
[19:11:39] -!- JT-QtPyVCP has quit [Remote host closed the connection]
[19:13:29] -!- JT-QtPyVCP has joined #hazzy
[19:14:45] -!- JT-QtPyVCP has quit [Remote host closed the connection]
[19:18:36] -!- JT-QtPyVCP has joined #hazzy
[19:34:21] <jthornton> video for a camera or the backplot?
[20:14:52] <TurBoss> camera
[20:19:47] <TurBoss> https://github.com
[20:21:55] <TurBoss> hazzy: actually the logs are very spammy
[20:39:23] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]