#hazzy | Logs for 2019-01-14

Back
[00:00:13] <hazzy-m> every so often I could trick it and it would go, but then drop right back down
[00:00:49] <Lcvette> Is because it's not reading in murican
[00:00:50] <hazzy-m> it's a canuck vehicle, it has to have it :(
[00:02:04] <TurBoss> mine is 165km/h
[00:02:05] <TurBoss> max
[00:02:51] <Lcvette> Mine has no limits
[00:03:05] <Lcvette> The limits are between your legs
[00:03:09] <Lcvette> Lol
[00:03:15] <TurBoss> ahhahaha
[00:03:27] <hazzy-m> hahahaha
[00:04:00] <Lcvette> My corvette had no limits either
[00:04:11] <Lcvette> It is frightening
[00:04:51] <Lcvette> Is fun to watch passengers who think they know what fast is react to 1200+whp
[00:05:08] <Lcvette> They have no clue
[00:05:12] <TurBoss> hohohohoh
[00:05:19] <hazzy-m> you've seen my little truck? My brother got a speeding ticked going 110 in a 65, speedometer only goes to 110 xD He lost his license ...
[00:05:31] <TurBoss> xD
[00:05:39] <Lcvette> The acceleration is unsettling
[00:05:40] <hazzy-m> I'd have that thing in a ditch in no time
[00:05:40] <hazzy-m> lol
[00:06:21] <Lcvette> I Gaurantee if I took you for a ride you would have an uncontrolled reaction
[00:06:57] <Lcvette> Everyone does even those who are expecting what's to come
[00:07:35] <Lcvette> Start reaching for imaginary handles, uttering gasps of fright
[00:07:40] <Lcvette> Lol
[00:07:54] <Lcvette> And then usually.... Do it again
[00:09:17] <TurBoss> https://www.youtube.com
[00:09:21] <TurBoss> like this?
[00:09:23] <Lcvette> I always do it from a roll on the interstate, 50mph to 180mph
[00:09:27] <hazzy-m> I always do that when I'm riding as a passenger in any car :D
[00:10:37] <hazzy-m> LOL
[00:10:50] <hazzy-m> that is pretty funny
[00:10:56] <TurBoss> free domingos y domingas
[00:11:07] <TurBoss> the full version is not at youtube
[00:11:15] <Lcvette> Lol
[00:13:45] <TurBoss> hazzy: is searching for the full version ahhahahaha
[00:19:09] <TurBoss> Lcvette: is doing the same
[00:19:13] <TurBoss> xD
[00:20:43] <Lcvette> I was looking for my vette videos
[00:20:52] <Lcvette> But they are no longer on YouTube
[00:20:58] <Lcvette> :(
[00:20:58] <TurBoss> 😞
[00:26:57] <hazzy-m> LOL
[00:27:02] * hazzy-m was working
[00:27:07] <hazzy-m> you slackers
[00:27:08] <TurBoss> ya...
[00:27:09] <hazzy-m> :D
[00:27:10] <TurBoss> :P
[00:27:20] <Lcvette> Is that what you call it hazzy
[00:27:27] <hazzy-m> hahaha
[00:27:27] <Lcvette> Lol
[00:27:47] * TurBoss is working another APP
[00:27:52] <TurBoss> not QtPyVCP
[00:27:53] <TurBoss> :)
[00:27:56] <Lcvette> I dunno if I want to touch the vkb now
[00:28:07] <Lcvette> Hahaha
[01:16:05] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 032 commits to 03master [+3/-0/±4] 13https://gitlab.com/kcjengr/qtpyvcp/compare/9d4c478529b46801e8ed41f44cb1f407604727ba...93e1ac084c1485fdc93113061f2b3806570a5dda
[01:16:06] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 030275529 - DOC: update INI configuration options
[01:16:08] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 0393e1ac0 - DOC: add initial YAML config documentation
[01:17:44] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+2/-0/±2] 13https://gitlab.com/kcjengr/qtpyvcp/compare/93e1ac084c1485fdc93113061f2b3806570a5dda...c3068c2a1fd7761e33b9a1692cc1a1949fab46b3
[01:17:45] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 03c3068c2 - DOC: add initial YAML config documentation
[01:18:12] <hazzy-m> gn8
[01:19:29] <TurBoss> n8
[04:10:12] -!- JT-qtpyvcp has quit [Remote host closed the connection]
[04:10:17] -!- john__ has joined #hazzy
[06:02:07] <jthornton> morning
[06:24:01] <TurBoss> morning jt
[06:25:00] -!- JT-qtpyvcp has joined #hazzy
[06:25:07] -!- JT-qtpyvcp has quit [Client Quit]
[06:42:11] <jthornton> how do I get your screen your working on?
[06:59:44] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 032 commits to 03master [+5/-0/±5] 13https://gitlab.com/kcjengr/qtpyvcp/compare/c3068c2a1fd7761e33b9a1692cc1a1949fab46b3...ee33755520b3f889ef3c68244004fe242348e6a7
[06:59:45] <Not-e6c6> [02QtPyVCP] 07John Thornton 03ac071a2 - DOC: add more content to tutorial Signed-off-by: John Thornton <jt@gnipsel.com>
[06:59:47] <Not-e6c6> [02QtPyVCP] 07John Thornton 03ee33755 - DOC: fix typo Signed-off-by: John Thornton <jt@gnipsel.com>
[07:28:38] <TurBoss> pip install git+https://github.com/turboss/jauriacnc.git
[07:28:47] <TurBoss> sorry didnt saw
[07:29:15] <TurBoss> or clone de repo
[07:29:26] <TurBoss> pip install -e .
[07:33:15] <jthornton> thanks
[08:06:17] <jthornton> how can I disable the MDIEntry until power is on and either the machine is homed or NO_FORCE_HOMING = 1
[08:38:11] <jthornton> and is it possible to have just a LED widget?
[08:42:55] <TurBoss> should be done in mdi widget
[08:43:00] <TurBoss> looks like a bug
[08:43:15] <TurBoss> Led widget?
[08:43:15] <TurBoss> how
[08:58:16] -!- JT-Shop has quit [Remote host closed the connection]
[08:59:30] -!- JT-Shop has joined #hazzy
[09:02:14] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+5/-0/±5] 13https://gitlab.com/kcjengr/qtpyvcp/compare/ee33755520b3f889ef3c68244004fe242348e6a7...3d91f15da7dc46cbf516ed44be830e586bd07ebb
[09:02:16] <Not-e6c6> [02QtPyVCP] 07John Thornton 033d91f15 - DOC: add more content to the tutorial Signed-off-by: John Thornton <jt@gnipsel.com>
[09:03:42] <JT-Shop> yea we have a led button but I'm looking for just a led with rules
[09:15:24] <TurBoss> could be done
[09:15:42] <TurBoss> hack the led button
[09:16:05] <TurBoss> c&p the widget
[09:16:16] <TurBoss> give me a sek
[09:20:28] <TurBoss> needs some time
[09:25:17] <jthornton> thanks
[09:39:19] <TurBoss> done
[09:39:21] <TurBoss> give me a sek
[09:39:23] <TurBoss> to push
[09:40:52] <Not-e6c6> [02QtPyVCP] 07TurBoss created branch 03LED
[09:41:12] <TurBoss> jthornton: Led is abailable on the LED branch
[09:41:19] <TurBoss> could you please test?
[09:41:50] <TurBoss> is a ugly hack
[09:41:57] <JT-Shop> thanks, I'll test it when I get back from shipping todays stuff
[09:42:11] <TurBoss> great
[09:42:14] <TurBoss> latter
[09:45:55] <hazzy-m> Morning
[09:46:30] <TurBoss> Alo
[09:46:41] <TurBoss> I did a ulgy hack
[09:46:49] <TurBoss> could you take a look if posible?=
[09:52:12] <hazzy-m> Sure!
[09:52:29] <TurBoss> LED branch
[09:53:29] <hazzy-m> I'm not at a PC, I'll check in a few
[09:53:40] <TurBoss> ok thanks
[09:55:22] -!- john__ has quit [Quit: Leaving]
[09:55:42] -!- JT-qtpyvcp has joined #hazzy
[09:55:50] <Not-e6c6> [02QtPyVCP] 07TurBoss pushed 031 commit to 03LED [+1/-0/±1] 13https://gitlab.com/kcjengr/qtpyvcp/compare/8de1889eaa677267134a37f773d18b40ba59a3d0...ac01c8d2a328fe5338c659e13afc74bb4742d420
[09:55:52] <Not-e6c6> [02QtPyVCP] 07TurBoss 03ac01c8d - move led plugin initialization to base widgets
[09:58:37] <Not-e6c6> [02QtPyVCP] 07TurBoss pushed 031 commit to 03LED [+0/-0/±1] 13https://gitlab.com/kcjengr/qtpyvcp/compare/ac01c8d2a328fe5338c659e13afc74bb4742d420...49d68c60eb96f211c5fa3c452e9ec4e6e52db359
[09:58:38] <Not-e6c6> [02QtPyVCP] 07TurBoss 0349d68c6 - add base widgets to module init
[09:58:56] <TurBoss> ok now should be done
[09:59:06] <TurBoss> not ugly any more
[10:01:32] <jthornton> hmmm I have qtpyvcp installed with pip will pip install -e . from the qtpyvcp directory mess up the installed one?
[10:04:00] <hazzy-m> propably not, but i usualy just run pip uninstall qtpyvcp before instaling so it is clear which I am using
[10:04:51] <Roguish> jthornton: I was wondering about that, that instruction is in your tutorial.
[10:05:04] <hazzy-m> you can run with pip install -e . --no-deps to reduce internet usage, it should be low though since i think pip caches the packages
[10:08:32] <hazzy-m> jthornton: tutorials are looking fantastic
[11:15:43] <hazzy-m> TurBoss: the LED needs to inherit VCPWidget to be able to use rules
[11:16:00] <TurBoss> oh
[11:16:04] <hazzy-m> just pushed to add LEDWidget
[11:16:08] <TurBoss> thanks @kcjengr:matrix.org
[11:16:21] <TurBoss> fantastic
[11:16:47] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 033 commits to 03master [+2/-2/±2] 13https://gitlab.com/kcjengr/qtpyvcp/compare/3d91f15da7dc46cbf516ed44be830e586bd07ebb...6f04d6856ba54d9d7d35d5ff000a318434550671
[11:16:48] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 0311939f8 - remove led_widget_2.py
[11:16:50] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 0335e6109 - ENH: Add StatusLED widget
[11:16:51] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 036f04d68 - Merge branch 'LEDWidget'
[11:22:14] <TurBoss> I must start using the TAL
[11:22:16] <TurBoss> :)
[11:44:07] <Not-e6c6> [02QtPyVCP] 07TurBoss deleted branch 03LED
[11:44:17] <TurBoss> *TLA xD
[11:45:23] <hazzy-m> TurBoss: Oh no, its fine, only needed if you want the change to show in the change log
[11:45:39] <TurBoss> oh ok
[11:45:49] <hazzy-m> for simple commits I don't use them, for for big things I wan't to show off it is good!
[11:45:50] <hazzy-m> :D
[11:45:58] <TurBoss> good to know
[11:46:02] <TurBoss> secret feature
[11:46:19] <hazzy-m> yes, lol
[11:48:19] <hazzy-m> stole from numpy: https://docs.scipy.org
[12:05:46] * jthornton takes a break from work and eats lunch while testing the new status LED
[12:06:02] <jthornton> well that's a lie, I've not done any work yet today
[12:06:18] <jthornton> hazzy-m: is the LED diameter fixed?
[12:07:21] <jthornton> oh yea it works perfectly!
[12:07:33] <jthornton> never mind I just saw the diameter property lol
[12:10:05] <jthornton> is there a way to set the off color?
[12:18:17] <hazzy-m> jthornton: not yet, off is just black
[12:18:33] * hazzy-m adds that to his todo list
[12:21:38] <jthornton> ok, thanks for the led it is awesome
[12:22:15] <jthornton> lunch minute over I must do some work lol
[12:30:48] <JT-Shop2> is the syntax for rules expressions fixed? the format seems a bit strange to me
[12:37:12] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+2/-0/±1] 13https://gitlab.com/kcjengr/qtpyvcp/compare/6f04d6856ba54d9d7d35d5ff000a318434550671...20910cf3340d5b2b00b2134dd31229bb31d44c43
[12:37:13] <Not-e6c6> [02QtPyVCP] 07John Thornton 0320910cf - DOC: add info about status led Signed-off-by: John Thornton <jt@gnipsel.com>
[12:39:14] <hazzy-m> JT-Shop2: the rules expression format is not necessarily fixed, what do you have in mind?
[12:40:37] <JT-Shop2> I was just stumbling around trying to do some and kept getting errors that I didn't understand lol
[12:42:12] <JT-Shop2> IIRC I was trying to do something like if ... elif ... else
[12:42:22] <hazzy-m> they are not ideal, but I think that are about as simple as I can make them
[12:42:25] <hazzy-m> aha
[12:43:54] <hazzy-m> for that you use the the format:
[12:43:55] <hazzy-m> something if True else somethingelse if False else default
[12:44:03] <hazzy-m> I'll get you a real example in a sec
[12:45:14] * hazzy-m uploaded an image: image.png (176KB) < https://matrix.org >
[12:45:58] <hazzy-m> That is the rule to set the error status for a joint i QControl, uses multiple if else statments
[12:46:11] <hazzy-m> 'Fault' if ch[1] else 'Limit' if ch[0] else 'Homing' if ch[3] else 'Unhomed' if not ch[2] else ''
[12:47:26] <hazzy-m> the rules expression is a standard python expression, nothing special, but I agree that python expressions are not the most intuitive, lol
[12:49:29] <JT-Shop2> ah that is a good example, thanks
[12:50:06] <JT-Shop2> that'
[12:50:13] <JT-Shop2> s what I was trying to do
[12:56:43] <hazzy-m> It would be awesome if you could work your magic on the rules docs once you get comfortable with them ...
[12:57:01] <JT-Shop2> will do that for sure
[12:57:25] * JT-Shop2 goes back to grinding pipes...
[13:18:03] <JT-Shop2> whew the worst part about making cat bypass pipes is blending the second pipe into the first at a corner no less
[13:18:35] <JT-Shop2> http://spyderstore.com
[13:18:51] <JT-Shop2> I need to take a better photo, I'm much better at building them now lol
[13:19:22] <JT-Shop2> geez that photo it's not even blasted clean lol
[13:34:14] <JT-qtpyvcp> ok I got a grip on that and it does what I expect, thanks
[13:40:18] <JT-qtpyvcp> do you have an example changing the background-color using a rule?
[13:48:34] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 032 commits to 03master [+0/-0/±2] 13https://gitlab.com/kcjengr/qtpyvcp/compare/20910cf3340d5b2b00b2134dd31229bb31d44c43...5cc75c2b5307c3578791521d0d93403c8baafb98
[13:48:35] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 03cfa73d7 - DOC: add info on creating custom dialogs
[13:48:37] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 035cc75c2 - minor rewording in dialogs
[15:31:26] <JT-qtpyvcp> rules, property style class what's wrong with my expression? "background-color:rgb(239, 41, 41)" if ch[0]
[15:31:33] <JT-qtpyvcp> ch[0] is a bool
[15:33:53] <hazzy-m> "background-color:rgb(239, 41, 41)" if ch[0] else ""
[15:34:08] <JT-qtpyvcp> ah need the else then
[15:34:19] <hazzy-m> oh wait
[15:34:37] <hazzy-m> that is for setting a style class name, not the actual style sheet
[15:34:39] <hazzy-m> sek
[15:34:44] <JT-qtpyvcp> ok
[15:35:13] <hazzy-m> https://qtpyvcp.kcjengr.com
[15:35:50] <hazzy-m> what the heck, I should add a propery to set the stylesheet too!
[15:37:42] <hazzy-m> never thought of doing that, but I see it might be useful
[15:38:25] <JT-qtpyvcp> yea change the background color of a status label as the status changes
[15:59:38] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±3] 13https://gitlab.com/kcjengr/qtpyvcp/compare/5cc75c2b5307c3578791521d0d93403c8baafb98...ee86c08afbf6af555ff82a122760d52dd4d146ae
[15:59:40] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 03ee86c08 - ENH: add support for setting widget stylesheet with rules
[16:00:12] <hazzy-m> JT-qtpyvcp: thanks for that!
[16:11:38] -!- jschi[m] has quit [Ping timeout: 268 seconds]
[16:11:40] -!- JoseLuisGitter[m has quit [Ping timeout: 268 seconds]
[16:11:43] -!- JT-Shop2 has quit [Ping timeout: 268 seconds]
[16:12:29] -!- jschi[m] has joined #hazzy
[16:12:54] -!- JoseLuisGitter[m has joined #hazzy
[16:14:20] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±2] 13https://gitlab.com/kcjengr/qtpyvcp/compare/ee86c08afbf6af555ff82a122760d52dd4d146ae...5c22ec4dfd4044069281f6d2e4b8cdf2cc1725cf
[16:14:21] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 035c22ec4 - label widgets should also inherit base rules properties
[16:21:02] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±1] 13https://gitlab.com/kcjengr/qtpyvcp/compare/5c22ec4dfd4044069281f6d2e4b8cdf2cc1725cf...ba2f4b5614914482b3a6d7235af8239b143aa492
[16:21:04] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 03ba2f4b5 - ENH: RulesEditor - sort items in property selection combobox
[16:23:49] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson created branch 03master
[16:26:03] -!- JT-Shop2 has joined #hazzy
[16:39:32] <JT-qtpyvcp> so what does the property Style Class do?
[16:40:23] <JT-qtpyvcp> oh reading back if you have some preset style classes you can set the widget to that class?
[16:40:57] <hazzy-m> it changes the style class property, which you can then use in a QSS file to select a specify style block
[16:40:58] <hazzy-m> right
[16:45:38] <JT-Shop> if you have an example of doing that it would be nice, I pretty much understand what it does but the devil is in the details lol
[16:45:59] <hazzy-m> Your example worked perfect
[16:46:02] <hazzy-m> sek
[16:47:03] * hazzy-m uploaded an image: image.png (44KB) < https://matrix.org >
[16:47:16] <hazzy-m> "background-color:rgb(239, 41, 41)" if not ch[0] else ""
[16:47:46] <hazzy-m> can you see the screenshots, or are they not helpful?
[16:48:40] <JT-Shop> yea I see them, I was grinding on some parts
[16:48:50] <JT-Shop> and yep they help a lot
[16:49:22] <JT-Shop> I was talking about an example of the Style Class
[16:49:30] <hazzy-m> ok good, didn't know if they came thur ok on IRC (they show up inline on matrix)
[16:49:47] <JT-Shop> they show up as a link for me
[16:49:49] <hazzy-m> oh, in the QSS file, sorry
[16:49:57] <hazzy-m> there should beone in the docs, sek
[16:50:13] <hazzy-m> https://qtpyvcp.kcjengr.com
[16:50:13] <JT-Shop> now to make the parts I cut too big the right size in the mill lol
[16:50:30] <hazzy-m> are you tube notching?
[16:52:08] <JT-Shop> making the mounts for the CBP, done fitting up the tube on this one
[16:52:33] <hazzy-m> nice
[16:53:02] <JT-Shop> ok I see you had widgetclass style name in the qss all very clear now
[16:53:22] <JT-Shop> very nice for lots of common styles
[16:58:39] <JT-Shop> the boss said I can stop working and have a beer with the chickens :)
[16:59:57] <hazzy-m> see, he is not that bad afterall
[16:59:59] <hazzy-m> :)
[17:57:52] <JT-qtpyvcp> looking at the style example in the docs is widgetclass all the widgets?
[17:58:33] <hazzy-m> No, that is just an example, replace with ActionButton etc.
[17:58:49] <hazzy-m> probably could be clearer ..
[17:58:57] <JT-qtpyvcp> ah ok, can you also use wild cards?
[17:59:04] <JT-qtpyvcp> yea I'll work on that :)
[17:59:19] <JT-qtpyvcp> like for object names?
[17:59:26] <hazzy-m> I am not sure, you can use * to get all widgets
[17:59:35] <hazzy-m> but not sure about others
[18:00:59] <hazzy-m> thanks! don't know how you do it, your docs are concise and yet have all the info
[18:01:57] <JT-qtpyvcp> lol I've been doing docs for quite some time for emc and my own projects
[18:03:34] <JT-qtpyvcp> should I let the folks on the forum know about my tutorial?
[18:05:43] <hazzy-m> Yeah, that would be great!
[18:06:30] <hazzy-m> I keep intending to start a QtPyVCP topic, but I don't want it to come across as if we are competing with Chris M's QtVCP ...
[18:07:46] <jthornton> yea, I understand that for sure but it seems qtpyvcp is quite different in approaches
[18:13:08] <hazzy-m> yes it is. Chris really wanted me to help with QtVCP, and I did for a while, but our approach was so different it was difficult. We used to chat a good bit, but he hasn't written in a long time, I hope he is just busy and not upset ...
[18:15:21] <jthornton> I hope so, I like Chris and have chatted with him for a long while. When he first started the mesa tool it was not well received but I encouraged him to press on with it
[18:16:01] <jthornton> I still need to figure out how to sort out my 7i96 tool to be installed with pip install git-7i96-location
[18:17:20] <jthornton> https://forum.linuxcnc.org
[18:19:09] <hazzy-m> perfect, thank you!
[18:20:35] <jthornton> refresh the browser, I edited it
[18:21:20] <hazzy-m> Nice! Pics or it didn't happen :)
[18:21:50] <jthornton> I added a screen shot
[18:23:00] <jthornton> do we have a popup keyboard for touch screens?
[18:24:04] <hazzy-m> there is a VKB branch with some simi working virtual keybaords
[18:24:12] <hazzy-m> I should rebase it on master
[18:24:23] <jthornton> keyboards you made?
[18:24:47] <hazzy-m> yes
[18:24:52] <jthornton> cool
[18:25:26] <hazzy-m> there are actualy VirtualKey widgets for making your own VKB in desigern
[18:25:31] <jthornton> I wonder if a tab with a keyboard and a radio or something to select the destination would work
[18:25:49] <jthornton> I need to look at that
[18:26:42] <jthornton> or maybe some actionbuttons that send the output to say the mdi widget dunno just thinking out loud
[18:27:19] * hazzy-m uploaded an image: image.png (747KB) < https://matrix.org >
[18:27:32] <hazzy-m> the VKB auto shows then you click on any entry widget
[18:28:40] <jthornton> that would work fine
[18:28:52] <jthornton> what the heck is the desktop photo of lol
[18:30:11] <hazzy-m> LOL, its an old pumping station
[18:32:25] <jthornton> how wide is the keyboard
[18:32:48] <hazzy-m> wide! lol, Lcvette made it
[18:33:16] <jthornton> needs to fit in 800 x 600 IMHO
[18:33:26] <hazzy-m> agreed
[18:33:59] <hazzy-m> they are easy to make, just drag n drop VirtualKey widgets
[18:34:34] <jthornton> I don't see the virtualkey widget in designer
[18:34:57] <hazzy-m> did you checkout the VKB branch?
[18:35:32] <jthornton> no, not yet
[18:35:36] <Roguish> how is one supposed to know about all these branches, and what they are for?
[18:35:46] <Roguish> ask, I guess....
[18:35:57] <jthornton> you need to merge that to master :)
[18:36:28] <hazzy-m> hehe, well its not done, don't want to break master too bad :D
[18:36:38] <hazzy-m> did you download GitKraken?
[18:36:48] <hazzy-m> that will make it much easyer
[18:37:30] <jthornton> I did and installed it here and the first thing it wanted me to do was log in is it a cloud thing?
[18:37:35] * hazzy-m uploaded an image: image.png (226KB) < https://matrix.org >
[18:38:50] <hazzy-m> yes, that is fine, all it needs is you to give it access to your github account, if you have SSH set up you don't need to do that though, you can have it use your local keys
[18:39:32] <hazzy-m> the branches are all listed on the left panel, you just click to check them out
[18:44:16] <jthornton> cool, I didn't know what it did
[18:45:30] <hazzy-m> also if it asks, just say you are using for noncommercial purposes
[18:46:00] <jthornton> ok
[18:48:57] <jthornton> ok I have it going on this pc :)
[18:49:02] <jthornton> gotta check it out some
[18:49:56] <jthornton> nice it has a stash button lol
[18:50:25] <hazzy-m> hurray! it takes a few to get used to, but it will make you look like a git pro
[18:51:02] <jthornton> jeff was trying to teach me to be a git keyboard pro lol
[18:52:02] <hazzy-m> hehe, don't let him know we use GitKraken, he might explode
[18:52:03] <hazzy-m> LOL
[18:52:39] <jthornton> I think he has mellowed out some he even takes care of the forum!
[18:53:08] <hazzy-m> I haven't seen him around much, hope he is ok
[18:53:19] <hazzy-m> yes, he stays on top of it!
[18:55:15] <hazzy-m> Have you ever met in person? seems like a fascinating person
[18:55:48] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]
[18:56:06] <jthornton> no, I came close to going to an emc meeting at Stuart's place but ran out of time
[18:57:16] <jthornton> as I understand it was Chris Radek that suckered Jeff into joining the EMC team
[18:59:29] <jthornton> saying look how cool this is lol
[19:00:07] <jthornton> do you think there is something in the vkb branch that can break master?
[19:01:41] <hazzy-m> that must have been in the early days. a LOT of the emc source files have his sig in them, certainly one of the more prolific contributes.
[19:01:42] <hazzy-m> I guess axis is he's brain child
[19:02:23] <hazzy-m> probably not, but it is far come complete to I'd like to keep it seperate till it is a little more stable,
[19:02:39] <hazzy-m> I will rebase it to it has all the changes from master
[19:03:18] <jthornton> I think chris r and jeff both worked on axis
[19:03:38] <jthornton> ok, what is not stable in vkb?
[19:04:15] <hazzy-m> well there is no way to disable it at the moment, so it will always be poping up even when not needed
[19:05:33] <jthornton> well that is an issue
[19:13:36] <hazzy-m> Lcvette: The git tree is a huge mess for the BP virtical and BP lathe, what branches were you using for each? I'm gonna try and clean them up
[19:15:42] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 0320 commits to 03ModuleSignals [+17/-2/±29] 13https://gitlab.com/kcjengr/qtpyvcp/compare/a380e7e79553ed07a81a81a9a6a9e98c06663774...b32a0a2530142bc45f7ec54c6ef9e2229d828233
[19:15:43] <Not-e6c6> [02QtPyVCP] 07John Thornton 03113fa15 - DOC: add info about hiding the menu in the tutorial Signed-off-by: John Thornton <jt@gnipsel.com>
[19:15:45] <Not-e6c6> [02QtPyVCP] 07John Thornton 03ca03a32 - DOC: add upgrade information Signed-off-by: John Thornton <jt@gnipsel.com>
[19:15:46] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson 039d4c478 - qcompile - make print statements py3 compatible
[19:15:48] <Not-e6c6> [02QtPyVCP] ... and 17 more commits.
[19:16:04] <Lcvette> ?
[19:16:58] <Lcvette> Not sure I follow
[19:17:00] <hazzy-m> there are BP lathe commits all mixed in on the VKB branch
[19:17:39] <Lcvette> So just make it lathe instead of vkb
[19:17:49] <hazzy-m> to continue work on the VKB I need to sort the all out
[19:18:08] <Lcvette> I tried that but it didn't take
[19:18:27] <hazzy-m> what branch is the BP lathe stuff you want to keep on?
[19:19:04] <Lcvette> I don't know
[19:19:13] <Lcvette> Not near computer
[19:20:26] <hazzy-m> ok, no rush, but eventually I need a little help with what is where
[19:20:30] * hazzy-m uploaded an image: image.png (33KB) < https://matrix.org >
[19:21:08] <hazzy-m> several things like this, ATC graphic on master, which I assume should have been on the ATC branch?
[19:21:58] <Lcvette> Atc branch?
[19:22:26] <Lcvette> That graphic could replace all graphics
[19:22:43] <Lcvette> In all branches
[19:25:51] <hazzy-m> Ok, I cherrypicked that commit into master, so you should be able to update your master to origin/master without loosing anything
[19:28:10] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson deleted branch 03gh-pages
[19:30:06] <Lcvette> Will you be on later?
[19:30:41] <Lcvette> I just got to a car meet dinner
[19:31:03] <hazzy-m> yes! No rush at all
[19:31:07] <hazzy-m> have fun!
[19:31:12] <Lcvette> Usually late Couples hours
[19:32:55] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson pushed 031 commit to 03master [+0/-0/±1] 13https://gitlab.com/kcjengr/qtpyvcp/compare/ba2f4b5614914482b3a6d7235af8239b143aa492...2205a2f33f5486d142017e4f2511375a9fb66375
[19:32:56] <Not-e6c6> [02QtPyVCP] 07Lcvette 032205a2f - updated atc graphic with correct size for turboss
[19:33:30] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson created branch 03gh-pages
[19:38:37] * hazzy-m uploaded an image: Screenshot_2019-01-14 speedtest - Google Search.png (19KB) < https://matrix.org >
[19:38:54] <hazzy-m> its hard to even push to github, impossible to watch youtube or even stream music :(
[21:28:59] * hazzy-m uploaded an image: PathPilot.png (303KB) < https://matrix.org >
[21:29:16] <hazzy-m> LOL, found a screen shot of when I started hacking PathPilot
[21:30:09] <hazzy-m> 28 Feb 17, didn't know any coding then, just starting to learn python
[23:35:05] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson created branch 03master
[23:40:39] <Not-e6c6> [02QtPyVCP] 07Kurt Jacobson created branch 03master
[23:45:29] <hazzy-m> Not-e6c6: Who are you?
[23:58:41] <Not-e6c6> [02GitHub] Mind your words, they are important.
[23:58:54] <hazzy-m> xD
[23:59:24] <hazzy-m> Not-e6c6: So you can speak?