#hazzy | Logs for 2019-02-04
Back
[00:01:37] <Lcvette> Just saw you Instagram posts, is that the new motor?
[00:02:09] <hazzy-m> yes
[00:02:14] <hazzy-m> did you see the take two post?
[00:02:15] <Lcvette> What drive
[00:02:26] <Lcvette> No
[00:02:33] <hazzy-m> mucho better
[00:03:13] <hazzy-m> the drive is only 1hp GS1, I have a 3HP HuanYang heading over on the junk
[00:03:18] <Lcvette> What's the ratio
[00:03:29] <Lcvette> Ah
[00:03:33] <Lcvette> No wonder
[00:03:39] <Lcvette> Needs more power
[00:03:54] <Lcvette> And needs vector duty
[00:03:58] <hazzy-m> 1.6:1
[00:04:24] <hazzy-m> yeah, it realy needs a vector drive, but for now the VFD will be OK
[00:04:39] <hazzy-m> saving up for a AD vector drive
[00:04:55] <Lcvette> You can get the hg in a sensorless vector
[00:04:59] <Lcvette> Hy
[00:05:03] <Lcvette> Huangyang
[00:05:11] <hazzy-m> oh yeah?
[00:05:14] <Lcvette> Yeah
[00:05:18] <hazzy-m> nice!
[00:05:22] <Lcvette> They cost a couple bucks more
[00:05:33] <Lcvette> Not much
[00:05:44] <hazzy-m> do you have a link for one?
[00:05:46] <Lcvette> Makes I significant difference
[00:05:53] <hazzy-m> I might try to cancel my other one
[00:21:33] <Lcvette> Look at this on eBay
[00:21:34] <Lcvette> https://rover.ebay.com
[00:27:04] <Lcvette> Of course this is a quality piece here
[00:27:06] <hazzy-m> Hmm, that costs about the same as the HYs
[00:27:07] <Lcvette> https://www.automationdirect.com(vfd)/durapulse_-_gs3_(230_-z-_460_vac)_sensorless_vector_control/durapulse_-_gs3_drive_units_(230_-z-_460_vac)/gs3-22p0
[00:27:55] <hazzy-m> Yes, all the AD stuff is very good, and their prices are not all that high
[00:28:13] <hazzy-m> concidering you know what you are getting and they have great support
[00:28:45] <hazzy-m> I guess I should drive out there and see if they have any open box GS3s
[00:30:00] <Lcvette> Hello yeah
[00:30:18] <Lcvette> Maybe they will give you a student discount
[00:30:25] <Lcvette> :D
[00:30:46] <Lcvette> I have 2 of those gs3-22p0 drives
[00:31:02] <hazzy-m> they very well might, they higher a bunch of ME and EE students part time
[00:31:02] <Lcvette> They are Rock solid 💪
[00:31:31] <hazzy-m> all their stuff is top notch
[00:32:46] <Lcvette> In fact, I have a really loose for on my will drive, it is capable of rattling but the drive setup is so smooth it never does
[00:33:05] <Lcvette> I have had numerous comment on how quiet my machine cuts in comparison to many others
[00:33:47] <Lcvette> I attribute slot of it to the very uniform torque delivery of the motor drive combination setup
[00:33:58] <Lcvette> It sure isn't machine rigidity
[00:33:58] <Lcvette> Lol
[00:35:56] <Lcvette> https://youtu.be
[00:42:32] <hazzy-m> That is very impressive for a G0704!
[00:43:02] <Lcvette> Lol
[00:43:06] <Lcvette> That was babying it
[00:43:23] <Lcvette> I push it way harder usually on production
[00:43:46] <hazzy-m> https://youtu.be
[00:43:53] <Lcvette> That was a one off
[00:45:08] <hazzy-m> My uncle has a G0704 he uses for machining lowers, I've used it a few times and never could get it to perform close to that, but you make me thing most of the problem is the motor ...
[00:45:15] <hazzy-m> it has the stock one on it
[00:45:20] <hazzy-m> and runs mach, booooo
[00:45:58] <Lcvette> That's Mach
[00:46:02] <Lcvette> Lol
[00:46:47] <Lcvette> Motor, spindle bearings, belt drive and some love and it makes incredible parts
[00:47:10] <Lcvette> I need to upgrade my belvilles
[00:47:20] <Lcvette> They are my weak link currently
[00:47:29] <Lcvette> Tool pull out
[00:48:30] <Lcvette> Stock g0704 motors are weak
[00:49:45] <hazzy-m> it seems you can only get about .5 -.75 HP out of the stock motors, even at optimal speeds
[00:49:53] <hazzy-m> ok, time to sleep here, been a long day
[00:50:02] <Lcvette> Night
[00:50:05] <hazzy-m> gn8
[05:46:28] <JT-qtpyvcp> hazzy-m, didn't think of split and slicing together perfect
[06:08:28] -!- JT-qtpyvcp has quit [Read error: Connection reset by peer]
[06:09:04] -!- JT-Shop has quit [Read error: Connection reset by peer]
[06:09:13] -!- jthornton has quit [Read error: Connection reset by peer]
[06:09:35] -!- JT-Shop has joined #hazzy
[06:09:48] -!- jthornton has joined #hazzy
[06:11:53] -!- JT-qtpyvcp has joined #hazzy
[07:25:05] <JT-qtpyvcp> https://github.com
[07:28:54] <TurBoss> haha nice!!
[07:29:24] <TurBoss> https://github.com
[07:48:53] <JT-qtpyvcp> thanks
[07:49:02] <JT-qtpyvcp> took about an hour to make lol
[08:06:52] <TurBoss> nice
[09:02:50] <JT-qtpyvcp> https://forum.linuxcnc.org
[09:04:42] * TurBoss uploaded a video: bp_touch.webm (103KB) < https://matrix.org >
[09:05:39] <jthornton> cool
[09:06:51] <TurBoss> I can't upload to the forums
[09:06:59] <TurBoss> extension doesn't match
[09:07:29] <jthornton> they don't allow a webm?
[09:07:39] <TurBoss> no
[09:08:17] <TurBoss> pip install -e . failed
[09:08:35] <TurBoss> I had to reinstall qtpyvcp from my dev directory
[09:21:43] * TurBoss uploaded an image: image.png (29KB) < https://matrix.org >
[09:23:21] <Lcvette> hey i had gone through and fixed all the connections on the file page in PB along with changing all the button names but im not seeing the change anymore
[09:23:35] <Lcvette> morning
[09:23:36] <TurBoss> what?
[09:23:51] <TurBoss> hello!
[09:23:57] <Lcvette> i had fixed the broken file page
[09:24:06] <TurBoss> oh no idea
[09:24:07] <TurBoss> :)
[09:34:36] <JT-Shop> I get an error if I install with pip from the repo until I do an update the error is openSelected not found on the filesystemtable
[09:38:45] <TurBoss> yes! that one
[09:58:33] <Lcvette> went back through and refixed the file page and made sure it pushed this time
[09:58:43] <Lcvette> must have forgot to stage and push last time
[09:58:49] <Lcvette> :O
[09:58:49] <Lcvette> lol
[09:58:54] <Lcvette> whoops
[10:00:56] <Lcvette> turboss
[10:01:01] <Lcvette> ru still here?
[10:01:09] <Lcvette> or JT
[10:01:15] <TurBoss> yo
[10:01:16] <Lcvette> question
[10:01:29] <Lcvette> or hazzy
[10:01:47] <Lcvette> i just realized i have to do the same thing in PB lathe and PB vertical
[10:02:03] <Lcvette> is there a quick way to copy the changes?
[10:02:30] <TurBoss> hmmmmmm
[10:02:50] <Lcvette> without damaging the formatting of the other ui's
[10:04:33] <hazzy-m> Lcvette yes, it's called find and replace! Lol
[10:04:38] <hazzy-m> Probably the easiest way
[10:04:42] <hazzy-m> Morning!
[10:04:47] <Lcvette> morning
[10:07:16] <Lcvette> not sure i understand how to use that functionality in this instance
[10:07:34] <Lcvette> and the way i envision that function i don't think it would be faster
[10:07:41] <Lcvette> lol
[10:07:55] <Lcvette> may be better off just manually changing
[10:08:54] <Lcvette> i was just curious if there were tricks for this type situation i wasn't aware of because i can see this will likely become a common occurance updating multiple ui's going forward when items issues are found
[10:10:00] <Lcvette> probably less common as time goes by
[10:10:19] <Lcvette> and most of the base items are sorted
[10:10:25] <hazzy-m> Yes, what we need is an update script like andy's INI updater
[10:11:01] <hazzy-m> If you don't mind waiting a day or two I'd be glad to do it once I get my big screen
[10:11:26] <Lcvette> no for sure table it
[10:11:44] <Lcvette> i can fix these manually for now its just minor things
[10:12:16] <Lcvette> as with anything the more you do it the more you see things you think about
[10:26:59] <Lcvette> is there a way to have probe basic open in full screen mode?
[10:29:38] <hazzy-m> Lcvette: Yess, on the command line you can use the -f or --fullscreen flags
[10:30:02] <hazzy-m> in the INI [DISPLAY]FULLSCREEN=yes
[10:30:14] <hazzy-m> or after it is open hit the F11 key
[10:30:20] <hazzy-m> you have lots of options :)
[10:30:33] <Lcvette> right, i was just looking for a default open
[10:30:46] <Lcvette> sounds like ini is what i was looking for
[10:31:11] <Lcvette> im fixing pb vertical file page and then will do the ini file and push
[10:31:12] <Lcvette> :D
[10:31:42] <hazzy-m> JT-qtpyvcp: The BP VCP looks great!
[10:32:03] <hazzy-m> I fixed the problem with having t update qtpyvcp after install, PR here: https://github.com
[10:32:21] * hazzy-m heads out to try it on his mill
[10:32:45] <Lcvette> nice!
[10:33:23] <hazzy-m> and once my screen comes I get try try PB for the first time in all its glory!!!
[10:33:27] <hazzy-m> I can't wait!!
[10:46:01] <Lcvette> indeed!
[10:46:12] <Lcvette> i think the vertical would be awesome for your mill
[10:46:45] <Lcvette> once everything is running smooth on my big machine and my lathe is up and running that is what i plan to switch over my G0704 too
[10:50:15] * Lcvette uploaded an image: image.png (170KB) < https://matrix.org >
[10:50:37] <Lcvette> is that semicolon whats stopping it from opening in fullscreen mode?
[10:54:08] <Lcvette> that fixed it, it now opens in full screen mode
[10:54:09] <Lcvette> :D
[10:58:57] <Lcvette> when does your screen arrive?
[11:01:38] <Lcvette> hazzy, can you make sure these changes show up on your kraken before i shut mine down
[11:01:52] <Lcvette> last time i lost them somehow and i swear i thought i staged and pushed
[11:02:51] * Lcvette uploaded an image: image.png (237KB) < https://matrix.org >
[11:03:05] <Lcvette> this is what mine looks like
[11:03:09] <hazzy-m> Lcvette: yep, looks good!
[11:03:15] <Lcvette> ok great
[11:03:16] <hazzy-m> same here
[11:03:24] <Lcvette> hurray!
[11:03:27] <Lcvette> file pages all work again
[11:03:36] <hazzy-m> excellent!!
[11:03:42] <Lcvette> so on all the other guis being made are they having the same issues as PB?
[11:05:39] <hazzy-m> No, atleast JCNC QControl and JCNC are not
[11:05:50] <hazzy-m> those are the only other ones I guess
[11:05:51] <hazzy-m> lol
[11:05:52] <Lcvette> why is that?
[11:06:46] <Lcvette> whats different?
[11:06:52] <hazzy-m> in thesetup.py file qtpyvcp v1.4.0 was specified, so it tried to install that version, which is ver old, we are at 0.1.14 noq
[11:07:22] * hazzy-m is not sure what language he is speaking
[11:07:47] <Lcvette> not following
[11:08:03] <Lcvette> it just needs to be updated?
[11:08:56] <hazzy-m> yes, but instead of updating, I made it not try to automatically install qtpyvcp, it causes more problems then it helps
[11:10:07] <Lcvette> still not following
[11:10:31] <Lcvette> what does it need?
[11:10:41] <Lcvette> does it need to be rebuilt?
[11:10:50] <Lcvette> using what is now in place?
[11:12:44] <hazzy-m> Lcvette: sorry, I misread PB as BP and thought you were talking about JTs ui I just fixed
[11:13:38] <Lcvette> ah, no im trying to discern if probe basic's list if issues is being seen in the new gui's
[11:13:45] <hazzy-m> I think PB is the only ones that uses the FileSystem widget (other than JTs VCP) so the other ones don't need to be updated
[11:13:48] <Lcvette> or if they have been resolved?
[11:14:09] <Lcvette> i mean the list of items that are not working
[11:14:16] <Lcvette> need fixing etc
[11:14:21] <hazzy-m> Yes, most of the PB issues you have listed also apply to other VCPs
[11:15:17] <hazzy-m> but PB has so many more features that more of the issues show up there
[11:15:43] <Lcvette> sure
[11:16:10] <Lcvette> but the basic functionality like the jogging stuff is universally broken in all
[11:17:06] <hazzy-m> that is correct
[11:17:33] <Lcvette> is that something i could look for on google to help?
[11:17:44] <Lcvette> lol
[11:18:00] <Lcvette> you know i can't contribute much in coding but i am a fierce googler
[11:19:21] -!- Roguish_VM has joined #hazzy
[11:20:24] <hazzy-m> not realy 😞 the problem is more of a design problem in my original code, I kow how to fix it and am almost done, but need to get a few more things working before I merge to naster
[11:20:46] <Lcvette> gotcha
[11:21:00] <Lcvette> well lean on me for google resourcing when you need
[11:21:31] <Lcvette> or busy work
[11:21:49] <Lcvette> cleaning anything up that needs it
[11:21:51] <hazzy-m> will do, thanks!
[11:21:52] <Lcvette> that helps you
[11:23:17] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 033 commits to 03master [+0/-0/±6] 13https://git.io/fhSNm
[11:23:19] <Not-e6c6> [02qtpyvcp] 07Lcvette 0325f9161 - fixed file page buttons and connections
[11:23:20] <Not-e6c6> [02qtpyvcp] 07Lcvette 031ac062a - fixed file page on pb lathe and vertical ui's
[11:23:22] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 03174da71 - DOC: Showcase - add BP Touch
[11:25:32] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+356/-0/±0] 13https://git.io/fhSN3
[11:25:34] <Not-e6c6> [02qtpyvcp] 07traviscibot 0351783e3 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[11:45:54] -!- Roguish_VM has quit [Remote host closed the connection]
[11:46:19] -!- Roguish_VM has joined #hazzy
[12:03:03] <Roguish_VM> JT-Shop: acquired the BP_Touch. noticed that on the mdi tab, keypad there is no 'F' for feed
[12:08:10] <hazzy-m> Roguish_VM: You're right, and there's not enough room for it either, f that!
[12:08:17] <hazzy-m> :)
[12:14:08] <Roguish_VM> not quite sure what the '<' symbol is for....
[12:21:30] <hazzy-m> Backspace?
[12:37:12] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03master [+2/-0/±2] 13https://git.io/fhSAa
[12:37:13] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 03b4b118d - DOC: Showcase - add sections for mill and lathe VCPs
[12:41:02] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+362/-0/±0] 13https://git.io/fhSAo
[12:41:04] <Not-e6c6> [02qtpyvcp] 07traviscibot 0375c7287 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[13:18:23] <TurBoss> Hello
[13:18:34] <TurBoss> I'm getting an erro while installing qtpyvcp from pip
[13:18:41] <TurBoss> is my first day
[13:19:21] <TurBoss> error: can't copy 'QtDesigner/Qt5.7.1-Py2.7-64bit/libpyqt5_py2.so': doesn't exist or not a regular file
[13:20:46] <hazzy-m> hello!
[13:21:06] <hazzy-m> what dir are you runnning the install script from?
[13:21:17] <TurBoss> bp
[13:21:43] <TurBoss> sek
[13:22:25] <TurBoss> pip install -e . --user
[13:22:29] <TurBoss> in qtpyvcp works
[13:22:36] <TurBoss> but not on bp_touch
[13:23:12] <hazzy-m> yes, I opened a PR to bp_touch to fix that
[13:23:19] <TurBoss> ok
[13:23:24] <TurBoss> i see
[15:59:36] <jthornton> Roguish_VM: right you are, it's a wonder I didn't miss more keys tossing it together in an hour
[16:02:35] <hazzy-m> jthornton: I've been playing with it on my mill, it works great! The MDI keypad it very convenient and easy to use
[16:02:57] <JT-qtpyvcp> thanks just need to add the fkin F key lol
[16:03:08] <JT-qtpyvcp> and dang you got to play with it before me!
[16:03:19] <JT-qtpyvcp> thanks for the pr to fix it
[16:03:37] <hazzy-m> you also forgot to add a button for going to the parent directory in the file chooser, :)
[16:04:08] <JT-qtpyvcp> not bad for an hours work adding that now
[16:04:43] <hazzy-m> not at all! I'm very impressed
[16:05:26] <hazzy-m> I think I might have pushed my addition of the navParent to that PR by accident
[16:07:42] <JT-qtpyvcp> I saw that in time to just use your button :)
[18:02:20] <JT-qtpyvcp> I guess I should have named it 3 Axis Mill but when I started it was for my mill... Tommy liked my comment "I spent about an hour"
[18:07:42] <JT-qtpyvcp> Failed to find entry point: bp_touch (vcp_launcher.py:165)
[18:07:48] <JT-qtpyvcp> hmmmm
[18:16:26] <JT-qtpyvcp> ah I had to do pip install -e . again
[18:26:11] <TurBoss> hello
[18:26:34] <JT-qtpyvcp> hola
[18:26:53] <TurBoss> my Ubuntu hdd died
[18:26:53] <TurBoss> :(
[18:26:57] <hazzy-m> howdy
[18:26:57] <TurBoss> another one
[18:27:03] <JT-qtpyvcp> rut row
[18:27:04] <hazzy-m> ho no!
[18:27:09] <TurBoss> it is in a power loop
[18:27:23] <TurBoss> click click click
[18:27:26] <TurBoss> u know
[18:27:43] <hazzy-m> well, at least it plays music still
[18:27:49] <TurBoss> true
[18:27:58] <TurBoss> now I'm on my windows boat
[18:28:03] <TurBoss> recue boat
[18:28:16] <hazzy-m> lol
[18:28:40] <TurBoss> hazzy: I saw you where playing with lathe thing
[18:33:31] <TurBoss> what can I do?
[18:33:47] <TurBoss> anything?
[18:40:52] <TurBoss> I'm taking a looka at the GL PLOT
[18:45:51] * hazzy-m is making tortillas
[18:45:56] <TurBoss> cool!
[18:46:06] <TurBoss> spanish tortilla?
[18:46:24] <hazzy-m> are the same as mexican?
[18:46:29] <hazzy-m> I think so
[18:46:38] <TurBoss> i don't think so
[18:46:55] <TurBoss> https://www.google.com
[18:47:35] <hazzy-m> ah, not the same
[18:47:44] * hazzy-m uploaded an image: IMG_20190204_184636820.jpg (347KB) < https://matrix.org >
[18:47:53] <TurBoss> ahhh
[18:47:56] <TurBoss> no
[18:47:58] <TurBoss> not same xD
[18:48:04] <JT-qtpyvcp> hazzy-m, is there a way to show the current path in the file system table?
[18:48:15] <TurBoss> yes
[18:48:25] <TurBoss> you can link to a entry field
[18:48:31] <TurBoss> aka text input
[18:48:35] <JT-qtpyvcp> I'd click on it but somehow I've used 1/2 of my bandwidth
[18:48:38] <TurBoss> or label
[18:48:54] <JT-qtpyvcp> hmm let me see if I can do that
[18:50:48] <JT-qtpyvcp> wow that was a wrong guess lol
[18:51:21] * TurBoss uploaded an image: image.png (98KB) < https://matrix.org >
[18:51:41] <JT-qtpyvcp> I figured it out :)
[18:52:05] <TurBoss> rootChanged
[18:52:27] <JT-qtpyvcp> yea
[18:53:11] <JT-qtpyvcp> that is cool
[18:54:07] <TurBoss> if you use a text entry
[18:54:12] <TurBoss> is bidirectional
[18:55:20] <JT-qtpyvcp> neat
[19:02:52] -!- Roguish_VM has quit [Read error: Connection reset by peer]
[19:04:22] * JT-qtpyvcp relaxes and watches 3d chips run in the new gui
[19:04:31] <TurBoss> hahahhahah
[19:12:32] <Roguish> JT-qtpyvcp: hey, so, does it work?
[19:14:56] <Roguish> and what is a PR ?
[19:15:52] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]
[19:22:45] <TurBoss> it does
[19:22:52] <TurBoss> PR = pull request
[19:22:56] <TurBoss> git thing
[19:30:50] -!- Roguish has joined #hazzy
[19:31:12] <Roguish> sorry had to push off for a windows reboot. network stuff
[19:31:25] <TurBoss> Roguish: yes bp_touch works :D
[19:31:34] <TurBoss> and PR means pull request
[19:31:43] <Roguish> ah, ok,
[19:31:46] <TurBoss> a github thing to propose code change
[19:31:46] <TurBoss> s
[19:32:30] <Roguish> i'm not all that formal. just talk to the horse's mouth
[19:32:31] <hazzy-m> Roguish: It works very well! I've been running my mill with it all day!
[19:33:12] <Roguish> i'll give it a try on mine. i don't expect any major problems.
[19:33:41] <Roguish> except when I clickon the exit button, nothing happens, not even a smiley face.
[19:33:54] <TurBoss> hazzy: what does the lp mean in here
[19:33:54] <TurBoss> https://github.com
[19:34:01] <hazzy-m> yes, the exit button is not connected yet
[19:34:03] <TurBoss> :)
[19:35:15] <hazzy-m> TurBoss: I have no idea, looks like a jepler variable name, LOL
[19:35:31] <TurBoss> oops
[19:35:54] <TurBoss> what has .call() ?
[19:35:57] <TurBoss> in linuxcnc
[19:36:06] <TurBoss> live plot?
[19:36:58] <hazzy-m> it must be live plot
[19:37:04] <hazzy-m> or maybe last position?
[19:37:10] <TurBoss> bingo!
[19:37:17] <hazzy-m> mayby try printing it and see that it is
[19:37:22] <TurBoss> pos = self.lp.last(self.get_show_live_plot())
[19:38:15] <TurBoss> can I obtain last position from qtpyvcp magics?
[19:40:24] <TurBoss> oh I had a crazy idea
[19:40:26] <TurBoss> :D
[20:36:09] <Not-e6c6> [02qtpyvcp] 07TurBoss created branch 03VTK2 - 13https://git.io/fhCou
[20:36:11] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03VTK2 [+1/-0/±1] 13https://git.io/fh9Un
[20:36:12] <Not-e6c6> [02qtpyvcp] 07TurBoss 031d61709 - the VTK test
[20:36:19] <TurBoss> ahhahahaha
[20:36:28] <hazzy-m> HOHOHOHOHO
[20:36:33] <hazzy-m> VTK again!
[20:36:40] <TurBoss> new 8.0
[20:36:49] <TurBoss> it runs on standalone
[20:36:52] <TurBoss> can you tryit?
[20:36:56] <hazzy-m> yes!
[20:36:58] <hazzy-m> sek
[20:37:05] <TurBoss> pip install --user vtk
[20:37:15] <TurBoss> 6 apt vs 8 pip
[20:37:53] <hazzy-m> oh, nice!
[20:37:56] * hazzy-m likes pip
[20:38:20] <hazzy-m> more up to date
[20:40:02] <hazzy-m> suposed to be two windows or one =?
[20:40:19] <TurBoss> https://www.anaconda.com
[20:40:25] <TurBoss> 2
[20:40:43] <TurBoss> one comes from the vtk
[20:40:51] <TurBoss> I need to pass it to a widget
[20:41:30] <hazzy-m> ok
[20:41:36] <hazzy-m> it works!
[20:42:13] <TurBoss> I'll spend some time with this :)
[20:43:56] <TurBoss> and embedded works?
[20:44:02] <TurBoss> glitches on mine
[20:44:16] <TurBoss> not correctly embedded problably
[20:44:30] <TurBoss> I would be nice to have stock 3d view :D
[20:45:28] <hazzy-m> yes it would!!
[20:45:48] <hazzy-m> a VTK backplot would be awesome!
[20:46:24] * TurBoss uploaded a video: video_2019-02-05_02-45-42.mp4 (1507KB) < https://matrix.org >
[20:46:31] <TurBoss> oops
[20:47:25] <TurBoss> this one
[20:47:28] * TurBoss uploaded a video: video_2019-02-05_02-45-01.mp4 (36004KB) < https://matrix.org >
[20:47:41] <TurBoss> just saw yout vid cutting
[20:48:01] <TurBoss> it moves in free
[20:51:09] <TurBoss> hazzy: from where I should Inherit for the vtk iwdget?
[20:51:26] <TurBoss> VCPWidget??
[20:51:42] <hazzy-m> yes, that fine
[20:51:54] <hazzy-m> the videos won't load :(
[20:51:58] <hazzy-m> interned is too slow
[20:52:09] <TurBoss> how can I add widget to it like a frame
[20:52:11] <TurBoss> ,....
[20:52:23] <TurBoss> self.addwidget ...
[20:57:08] <hazzy-m> yes, addWidget
[20:57:26] <hazzy-m> should work for any widget
[21:00:14] <TurBoss> i don't know how to embedd it
[21:00:15] <TurBoss> :(
[21:01:50] <hazzy-m> wan't me to play with it?
[21:01:54] <TurBoss> sure
[21:01:55] <TurBoss> sek
[21:01:56] <TurBoss> pushing
[21:02:01] <hazzy-m> ty
[21:02:32] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03VTK2 [+0/-0/±1] 13https://git.io/fh9U4
[21:02:33] <Not-e6c6> [02qtpyvcp] 07TurBoss 0374ba054 - VCPWidget
[21:02:41] <TurBoss> https://stackoverflow.com
[21:02:43] <TurBoss> anwer 1
[21:04:35] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03VTK2 [+0/-0/±1] 13https://git.io/fh9UR
[21:04:36] <Not-e6c6> [02qtpyvcp] 07TurBoss 0356e2d12 - add requirement to setup.py
[21:04:52] <TurBoss> thats all
[21:09:45] <TurBoss> found this : https://stackoverflow.com
[21:09:47] <TurBoss> no
[21:09:52] <TurBoss> this --> https://github.com
[21:10:38] <hazzy-m> ah, looks good
[21:11:32] <hazzy-m> wow, very good
[21:12:35] <TurBoss> yay
[21:14:28] <hazzy-m> it seems to be embeding, but the event loop is not running
[21:15:26] <TurBoss> :|
[21:16:09] * TurBoss uploaded an image: image.png (9KB) < https://matrix.org >
[21:16:13] <TurBoss> this does the same
[21:16:18] <TurBoss> a gliched area
[21:16:22] <TurBoss> so not embeddinf
[21:16:25] <TurBoss> so not embedding
[21:16:48] <hazzy-m> hmm
[21:16:55] <hazzy-m> aha!
[21:19:10] <Lcvette> Kingston A400 SSD 120GB SATA 3 2.5” Solid State Drive SA400S37/120G - Increase Performance https://www.amazon.com
[21:19:44] <Lcvette> Is this a decent SSD to replace the normal HDD in my lathe box?
[21:19:47] <hazzy-m> Lcvette: that is cheap
[21:20:23] <Lcvette> Yeah it is I thought maybe it wasn't the right thing or something
[21:20:42] <Lcvette> 240gb is $29
[21:24:30] * hazzy-m uploaded an image: image.png (34KB) < https://matrix.org >
[21:24:32] <hazzy-m> Hooray!!!
[21:26:23] <TurBoss> whoa!
[21:26:40] <TurBoss> how how?
[21:26:46] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03VTK2 [+0/-0/±2] 13https://git.io/fh9Ur
[21:26:47] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 03389d247 - get VTKWidget embedding
[21:26:57] <Lcvette> What's that
[21:27:18] <hazzy-m> at VTK thing
[21:27:19] <hazzy-m> :)
[21:27:37] <hazzy-m> Might be the start of a new GcodeBackplot
[21:27:51] <hazzy-m> with workpeice display
[21:28:00] <hazzy-m> if TurBoss gets busy
[21:28:01] <hazzy-m> :D
[21:28:09] <TurBoss> yay it doesn't works
[21:28:37] <hazzy-m> no?
[21:28:47] <TurBoss> i need to editvcp?
[21:28:48] <Lcvette> Ah
[21:28:57] <hazzy-m> yes, you need to add it to mini
[21:28:59] <hazzy-m> sorry
[21:29:06] <TurBoss> doesn't work on jcnc?
[21:29:30] <hazzy-m> oh, I did not try, but it should
[21:29:34] <TurBoss> oh ok
[21:29:58] <TurBoss> haha
[21:30:01] <TurBoss> it works
[21:30:05] <TurBoss> I had to add it again
[21:31:41] * TurBoss uploaded a video: Peek 05-02-2019 03-31.mp4 (116KB) < https://matrix.org >
[21:32:59] * TurBoss uploaded a video: Peek 05-02-2019 03-32.mp4 (253KB) < https://matrix.org >
[21:33:31] <hazzy-m> whoa! Nice
[21:33:37] <TurBoss> ahaha thanks!
[21:33:48] <TurBoss> self.frame.setLayout(self.vl)
[21:33:53] <TurBoss> was this?
[21:33:54] <hazzy-m> your's looks better than mine ..
[21:34:13] <TurBoss> boooo
[21:34:29] <TurBoss> you on opensource drivers :(
[21:34:31] <TurBoss> Rt
[21:35:01] <hazzy-m> oh, could be
[21:35:03] <hazzy-m> yes
[21:35:16] <TurBoss> maybe is some setting
[21:35:21] <TurBoss> looks like clip min
[21:35:36] <TurBoss> duno
[21:38:09] <TurBoss> do you have a good GPU on that computer?
[21:38:41] <hazzy-m> no
[21:38:50] <hazzy-m> hehe, very cheap
[21:38:53] <hazzy-m> laptop
[21:39:18] <TurBoss> could you try this on your mosnter pc
[21:39:21] <TurBoss> if not now latter
[21:39:25] <TurBoss> doesn't matter
[21:39:50] <hazzy-m> the GPU stopped working on it :(
[21:40:05] <hazzy-m> I'll try to get a new one tomorrow
[21:40:20] <TurBoss> don't worry
[21:40:21] <TurBoss> thanks
[21:40:32] <TurBoss> hazzy: you can reflow the broken gpu
[21:40:42] <TurBoss> I do it with a hot ait gun
[21:41:01] <TurBoss> cover all the pcb with aislant film
[21:41:05] <TurBoss> except the gpu
[21:41:15] <TurBoss> to measure temp
[21:41:16] <hazzy-m> it's not physical damage, its just causes the whole PC to crash
[21:41:24] <TurBoss> could be
[21:41:33] <TurBoss> do you have a hot air gun?
[21:41:56] <hazzy-m> no, but I should get one, it might be a loos connection I guess
[21:42:02] <TurBoss> ok!
[21:42:18] <TurBoss> ok I'll be playing with this :!!
[21:42:22] <TurBoss> HurraY11
[21:42:50] <hazzy-m> videos still have not downloaded :(
[21:42:55] <TurBoss> hohohoho
[21:46:43] * hazzy-m watches them on the phone
[21:46:52] <hazzy-m> wow, that machine is FAST!
[21:48:13] <TurBoss> hahaahahaha
[21:48:23] <TurBoss> its scary
[21:48:34] <TurBoss> its a Quaser
[21:48:40] <TurBoss> with Heidenhain Control
[21:48:50] <TurBoss> french + deucht
[21:48:52] <hazzy-m> oh! Those are good!
[21:49:13] <hazzy-m> but their data sheets and documentations is terrible! lol
[21:49:27] <TurBoss> :)
[21:49:57] * TurBoss uploaded an image: image.png (216KB) < https://matrix.org >
[21:50:16] <TurBoss> pyhoho
[22:06:46] <TurBoss> full size widget
[22:07:14] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03VTK2 [+0/-0/±1] 13https://git.io/fh9U5
[22:07:16] <Not-e6c6> [02qtpyvcp] 07TurBoss 0355c8805 - full size widget
[22:07:22] <TurBoss> here and there
[22:08:40] <hazzy-m> great! It even scales!
[22:08:48] <TurBoss> yup
[22:09:06] <TurBoss> from where can I read program data
[22:09:13] <TurBoss> I mean loaded program
[22:09:14] <TurBoss> :D
[22:09:57] <hazzy-m> getPlugin('status').stat.file
[22:10:10] <TurBoss> cool
[22:10:49] <hazzy-m> if you need the fignal then use getPlugin('status').file_loaded.connect(self.onFileLoaded...)
[22:11:16] <TurBoss> hmm Im not sure if I know how to pipe all
[22:11:25] <hazzy-m> sorry, `getPlugin('status').file_loaded.onValueChanged(self.onFileLoaded...)`
[22:11:45] <TurBoss> and I must sleep
[22:11:58] <TurBoss> I leave in your hands
[22:12:08] <hazzy-m> its late in Spain!
[22:12:13] <hazzy-m> good work1
[22:12:15] <hazzy-m> gn8
[22:12:18] <TurBoss> n8
[22:12:19] <TurBoss> ty
[22:12:40] <TurBoss> https://github.com bookmark this sh...
[23:10:57] <Lcvette> hazzy I was wondering what your into file looked like for your Mill again
[23:11:11] <Lcvette> Can't remember how you send it the other day
[23:11:18] <Lcvette> Ini
[23:12:22] <Lcvette> I looked in the files history but no luck
[23:12:50] <hazzy-m> https://github.com
[23:12:59] <hazzy-m> I keep all my configs in git, I am mess something up I can always go back!
[23:13:11] <Lcvette> Duhlol
[23:13:39] <hazzy-m> its a shame that the room seach does not include URLs
[23:14:08] <hazzy-m> I was trying to search for that ebay link the other day and it did give any results
[23:14:31] <hazzy-m> how is teh lathe coming along?
[23:15:25] <Lcvette> I've got the z acid on and am running it back and forth trying to align it before final mounting the flared bearing mount
[23:15:36] <Lcvette> The surface is not flat
[23:15:47] <Lcvette> It's a bit of a challenge
[23:16:36] <Lcvette> I really wish this was the short bed model
[23:16:54] <hazzy-m> I bet, no good surfaces on those chinese lathes
[23:16:59] <hazzy-m> you need your mill running :)
[23:17:22] <Lcvette> Wouldn't help much
[23:17:32] <Lcvette> This thing is almost 48" long
[23:18:23] <Lcvette> The feet would e hanging off my table which is 40 x13"
[23:19:25] <Lcvette> I'm unimpressed with these steppers
[23:19:51] <Lcvette> I have a different brand on my g0704 which are super to these
[23:20:09] <Lcvette> These are noisy and vibrate
[23:20:18] <hazzy-m> that sucks
[23:20:32] <hazzy-m> and your not even running them at high voltage
[23:20:40] <Lcvette> No
[23:21:11] <Lcvette> I hooked up the tuner to try and calm them down in the settings but it didn't do much
[23:22:29] <Lcvette> I have a 1200ozin on my g0704 z axis that is a smooth and quiet as a servo
[23:23:05] <Lcvette> Should have stock with the same brand
[23:24:13] <hazzy-m> yeah, mine are very quiet at well, but I did spend a wile tuning them to get some resonance at certain speeds out
[23:24:35] <Lcvette> I saw DMM had 86mm servos now which would bolt right up
[23:25:24] <Lcvette> I'm strongly considering going that route since I would be spending almost $250 on that power supply anyhow
[23:25:46] <Lcvette> Can't bring myself to invest more on these steppers I don't think
[23:26:01] <Lcvette> I was all set to until I ran then a bit today
[23:55:17] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03DataChannel [+0/-0/±10] 13https://git.io/fh9To
[23:55:19] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 033331352 - WIP: more things working