#hazzy | Logs for 2019-02-13

Back
[00:24:28] <Lcvette> Get it yet?
[01:15:40] <hazzy-m> nope :(
[01:15:57] <hazzy-m> SW is 27% downloaded
[01:16:05] <hazzy-m> 250min left
[01:16:06] <hazzy-m> lol
[01:16:20] <hazzy-m> gn8
[05:18:18] <jt-m[m]> morning
[05:45:50] <jt-m[m]> yea status all homed is working in data channels
[06:18:15] <Not-e6c6> [02qtpyvcp] 07jethornton pushed 031 commit to 03DataChannel [+0/-0/±1] 13https://git.io/fh7vD
[06:18:16] <Not-e6c6> [02qtpyvcp] 07jethornton 03bd164eb - DOC: add info for rules completer
[08:53:40] <Lcvette> morning
[08:56:40] <Lcvette> get something installed?
[08:59:27] <JT-Shop> morning
[10:01:54] <TurBoss> morning
[10:02:12] <hazzy-m> Morning
[10:02:53] <hazzy-m> Solid works is 11% done installing, been running all night
[10:04:20] <jthornton> damn that's slow
[10:06:29] <hazzy-m> download speed is now up to 1.45Mbps, so it should speed up a little
[10:11:13] <jthornton> where are you downloading it from?
[10:12:31] <hazzy-m> i'm using the SolidWorks installer, so it's downloading them from wherever it does
[10:12:59] <jthornton> ah
[10:13:09] <hazzy-m> I'm going to try and save the downloaded files so I can hopefully not have to download again if I decide to install on another machine
[10:13:45] <jthornton> I lost all my updates to my SW and when I download them they do not install
[10:19:46] -!- Roguish has joined #hazzy
[11:00:40] <Roguish> hazzy-m: ok, trying to get riot going. what's the 'room' name? i have looked back thru the logs and cannot find it.
[11:01:54] <Lcvette> QtPyVCP
[11:03:47] <hazzy-m> Or hazzy
[11:03:48] <Roguish> ok, thanks. how do I find it? i have entered that literally in the directory search, and i get an error 'failed to get public room list'
[11:04:20] <hazzy-m> https://riot.im
[11:04:59] -!- roguish[m] has joined #hazzy
[11:06:13] <hazzy-m> you did it!
[11:06:49] <Roguish> did that and it opened in the browser. i'm trying the app.
[11:07:41] <Roguish> ok,, that finally populated into the app.
[11:09:12] <roguish[m]> will this somehow link to the IRC channels for linuxcnc?
[11:09:37] <hazzy-m> yes
[11:09:47] <hazzy-m> https://riot.im
[11:10:35] <hazzy-m> but since only registered users have voice on #linuxcnc you will need to identify with NickServe
[11:11:24] <hazzy-m> start a chat with @appservice-irc:matrix.org
[11:12:03] <hazzy-m> and then identify as usual
[11:12:11] <hazzy-m> identify nick pass
[11:16:29] <Roguish> are the nicks case sensitive?
[11:16:39] <hazzy-m> yes
[11:16:48] <hazzy-m> seem to be
[11:17:00] <Roguish> riot is lower case only. wtf
[11:17:18] <Roguish> or that's matrix, i guess.
[11:24:57] <TurBoss> you can change your display name latter
[11:26:26] <Roguish> it's the nick register thing. i've been registered for years under 'Roguish' and don't need another, just 'cause of case.
[11:27:12] <Roguish> anyway, got the Riot going. qtpyvcp, linux, and linux-devel. i'll see how it goes.
[11:27:13] <hazzy-m> Roguish: use nick group
[11:27:24] <TurBoss> the issue !nick to the @appservice-irc:matrix.org
[11:27:34] <Roguish> logs
[11:55:51] <jt-m[m]> !nick@appservice-irc:matrix.org
[11:56:22] <jt-m[m]> must be more to that lol
[13:20:40] <hazzy-m> making progress, SW is 14% downloaded
[13:20:43] <hazzy-m> hehe
[14:15:22] <hazzy-m> oh sweet, back down o 11% complete
[14:15:23] <hazzy-m> :(
[14:52:28] <jthornton> https://forum.linuxcnc.org
[17:30:54] * jschi[m] uploaded an image: IMG_0262.jpg (164KB) < https://matrix.org >
[17:31:18] <jschi[m]> thanks hazzy and Lcvette - screen came in today
[17:31:23] <jschi[m]> clean install on the machine
[17:31:28] <jschi[m]> still working on the touch stuff
[17:32:36] <jt-m[m]> be faster for you to just drive over to my house and use my SW lol
[17:35:06] <hazzy-m> jt-m: lol, its true!
[17:35:27] <hazzy-m> nice jschi !
[17:39:02] <hazzy-m> I'm getting tired of this, SW was 21% done downloading, now its back down to 11%
[17:39:23] <hazzy-m> how is that even possible? the files were downloaded, not there not?
[17:39:24] <hazzy-m> WTF
[17:41:51] <hazzy-m> LOLOL
[17:41:52] <hazzy-m> I disconnected from the internet to see what would happen, it went down to 9%
[17:42:05] <jt-m[m]> that's crazy
[17:45:50] <jt-m[m]> a qtimer start(1000) is that one second?
[17:46:07] <hazzy-m> yes
[17:46:10] <hazzy-m> it is in ms
[17:46:41] * hazzy-m is goint to try downloading SW on linux and then copy to windose, LOL
[17:46:48] <jt-m[m]> I'd normally just google it but I'm so low on data right now
[17:47:14] <jt-m[m]> go to a coffee shop with wifi lol
[17:47:48] <hazzy-m> if I use the Linux laptop I could!!
[17:47:52] <hazzy-m> I might do that
[17:48:28] <hazzy-m> the owners of the one on the corner our our neighbors, so I could just leave may labtop there while it downloads :)
[17:49:12] <jt-m[m]> the way it's going I could have mailed you my disks lol
[17:50:03] <jschi[m]> hell to the yeah - touch drivers compiled and working - totally appreciate the pointer on this kcj/lcvette
[17:55:42] <hazzy-m> Fantastic! What driver version did you use?
[17:57:55] <hazzy-m> hohoho, downloading much faster on linux, most the visualization, plastics and electrical modules are already done!
[17:58:48] <JT-Shop> dang, wonder what the issue was?
[18:02:09] <Lcvette> sounds to me like you have a driver missing for you lan
[18:02:38] <Lcvette> or wrong driver
[18:02:53] <Lcvette> are you running a hard wire internet or wifi?
[18:04:42] <JT-Shop> hazzy-m: is that a fresh install of windblows 7? did you install the drivers for the motherboard?
[18:05:18] <Lcvette> yeah, the hardware drivers may not be correct
[18:05:39] <Lcvette> i had to go and get all of mine from lenovo
[18:05:50] <Lcvette> and that isn't the funnest thing
[18:06:40] <jschi[m]> I downloaded the 32bit manual install driver from elo
[18:06:45] <jschi[m]> super easy (if a bit manual) install
[18:06:54] <jschi[m]> and learned how to turn off the fucking beep@!
[18:06:57] <jschi[m]> triggered*
[18:07:40] <Lcvette> you can turn off the beep?
[18:07:45] <jschi[m]> 2nd one on this page - https://support.elotouch.com
[18:07:45] <Lcvette> dooood
[18:08:11] <jschi[m]> ./cplcmd in the /etc/opt/elo* dir
[18:08:14] <jschi[m]> command line control app
[18:08:22] <jschi[m]> Yes - FFS - was about to run a screwdriver through it
[18:08:39] <Lcvette> lol
[18:08:51] <Lcvette> we nare running 64bit
[18:09:03] <Lcvette> how do you turn beepo off
[18:09:29] <jschi[m]> thats the package i downloaded - ran make it built the correct dealio
[18:09:29] <Lcvette> booting linux box now
[18:09:36] <jschi[m]> I think they are all in there
[18:09:49] <Lcvette> so which vbersion?
[18:10:07] <Lcvette> link you sent was just a blank page
[18:10:39] <jschi[m]> you select linux as your os
[18:10:58] <Lcvette> which version number for the driver?
[18:11:00] <Lcvette> 2.5?
[18:11:03] <jschi[m]> https://support.elotouch.com
[18:11:04] <jschi[m]> yes
[18:11:04] <Lcvette> 5.0?
[18:11:08] <jschi[m]> 2.5
[18:11:17] <Lcvette> cool, thats what im on
[18:11:22] <Lcvette> works but the damned beep
[18:11:34] <jschi[m]> so there is a command line app called cplcommand
[18:11:46] <jschi[m]> so sudo cplcommand from the /opt/etc/elo* dir
[18:11:58] <jschi[m]> menu comes up, verify choice - beep gone
[18:12:25] <jschi[m]> the gui cpl doesn't work on this distro - but i dont care as long as you can control the beep
[18:13:04] <Lcvette> how do i get to that?
[18:13:28] <Lcvette> cd /opt/etc/elo
[18:13:39] <Lcvette> ?
[18:13:45] <jt-m[m]> hazzy: is there anything I need to do on Data Channel besides testing? now that I have working monitor on this pc
[18:13:52] <jschi[m]> terminal window
[18:13:54] <jschi[m]> cd /etc/opt/elo-mt-usb
[18:13:59] <jschi[m]> sudo ./cplcommand
[18:14:11] <jschi[m]> on my mac ATM so that's memory
[18:14:46] <Lcvette> i get command not found for the sudo ./cplcommand
[18:15:10] * Lcvette sent a long message: < https://matrix.org >
[18:15:42] <jt-m[m]> Lcvette: do ls to see what is there
[18:15:54] <jschi[m]> give me a sec
[18:16:10] * Lcvette sent a long message: < https://matrix.org >
[18:16:25] <jschi[m]> sudo ./cplcmd
[18:16:28] <jschi[m]> memory was bad
[18:17:26] <jschi[m]> ls -l
[18:17:29] <jschi[m]> wrong window
[18:18:05] <Lcvette> hurray, beep is gone!
[18:18:18] <jschi[m]> w00t
[18:18:38] <jschi[m]> sweet - I'll get a real config built for my machine and check back in friday or so to see if I can help some
[18:18:44] <Lcvette> in windows it allows you to configure a sound for the touch
[18:19:05] <jschi[m]> kill-kill-kill.wav
[18:19:11] <Lcvette> lol
[18:19:12] <jschi[m]> no thx
[18:19:27] <jschi[m]> or cough-ahem.wav
[18:19:38] <Lcvette> like the mouse click sound
[18:20:16] <Lcvette> or sexxy pornstar noises
[18:20:16] <Lcvette> lol
[18:20:25] <jschi[m]> lol - gotta run - thx
[18:26:02] <TurBoss> <jschi[m] "IMG_0262.jpg"> nice!
[18:37:07] <Lcvette> TURBOSS NEEDS A BIG TOUCHSCREEN NOW
[18:37:14] <TurBoss> ahahah
[18:37:16] <Lcvette> sorry for the caps
[18:37:20] <Lcvette> :D
[18:42:22] <Lcvette> hazzy, i turned off the beep with jeff's instructions
[18:42:27] <Lcvette> worked like a charm!
[20:40:59] <hazzy-m> hurray!
[20:49:38] <Lcvette> Hurray!
[20:55:35] <hazzy-m> this is a stupid question, but I forgot how to get to an external drive in windows
[20:55:47] <hazzy-m> were does it get mounted?
[20:56:08] <hazzy-m> it says in installed the device drivers, but I can't find it anywhere
[20:56:18] <hazzy-m> on linux it just pops up on the desktop
[21:12:36] <Lcvette> You mean ausb thing drive?
[21:12:40] <Lcvette> Thumb
[21:12:56] <Lcvette> My computer
[21:13:24] <Lcvette> File manager
[21:13:35] <Lcvette> Should show all available drives
[21:26:21] <hazzy-m> ok, that is what I thought, I can't get any of my external USB or sata HDD or SSD to show up ...
[21:26:50] <hazzy-m> just found a USB thumb drive and it works :shrug:
[21:27:27] * hazzy-m copys the SW files onto the thumb drive to transfer to the win machine
[21:55:54] <Lcvette> Yeah, the software you sent me for some reason makes my thumb drives unrecognizable to Windows
[21:57:13] <Lcvette> Did you use it for your formatting?
[21:57:27] <hazzy-m> the etcher one?
[21:57:28] <Lcvette> Might be part of the issue?
[21:57:40] <Lcvette> Don't remember the name
[21:57:58] <hazzy-m> no, these are just regular HDDs, with all sorts of formats
[21:58:01] <Lcvette> Just know after windows doesn't see them anymore
[21:58:15] <hazzy-m> interesting
[21:58:40] <Lcvette> When I used the other one it did recognize them
[21:59:58] <Lcvette> Rufus
[22:00:07] <Lcvette> Was the other one I used
[22:00:34] <Lcvette> Windows could open those even with Linux