#hazzy | Logs for 2019-03-03
Back
[00:01:47] <TurBoss> tool table editor on PB does not apply the changes until restart
[00:01:52] <TurBoss> :-|
[00:02:03] <TurBoss> maybe the save signal + reload
[00:02:18] <hazzy-m> hmmmm
[00:03:17] <TurBoss> oh ok
[00:03:31] <TurBoss> i have to click save then reload the change tool
[00:04:15] <TurBoss> no
[00:04:18] <TurBoss> it doesn't
[00:04:26] <TurBoss> still requires restart
[00:38:42] <hazzy-m> the tool seems good!
[05:03:51] <jt-m[m]> morning
[10:15:00] <Lcvette> morning
[10:16:08] <hazzy-m> Morning
[10:23:02] <jthornton> morning, snowing here
[10:23:08] <Lcvette> is your vtk origin marker moving to the offset position?
[10:57:38] <Lcvette> wow, getting late in the season for snow around these parts
[11:00:45] <Lcvette> void vtkInteractorStyleTrackballCamera::OnMiddleButtonDown ( )
[11:00:55] <Lcvette> middle button os pan
[11:00:58] <Lcvette> is
[11:01:19] <Lcvette> if i wasted to add a pan button to the screen, is this what would be used?
[11:01:43] <Lcvette> https://vtk.org
[11:01:52] <Lcvette> turboss, hazzy
[11:01:56] <Lcvette> jt\
[11:03:11] <Lcvette> TurBoss: hazzy jt-m ?
[11:04:40] <Lcvette> void vtkInteractorStyleTrackballCamera::Pan ( )
[11:08:21] <jthornton> that's c for python vtkInteractorStyleTrackballCamera.Pan()
[11:10:14] <Lcvette> so if i want to add a pan button i need to add that line to the .py file somewhere with some other stuff
[11:11:35] * Lcvette uploaded an image: image.png (93KB) < https://matrix.org >
[11:12:00] <Lcvette> i see it here, the trackballcamera portion already
[11:12:02] <jthornton> that would be my guess plus something to give direction I assume
[11:12:22] <Lcvette> that would be screen touch
[11:12:37] <Lcvette> just need something to take it out of rotation mode
[11:12:49] <Lcvette> like clicking the middle mouse button does
[11:13:31] <Lcvette> so i was thining activate pan mode then use screen touch to drag where wanted and turn off pan mode when done]
[11:17:41] <Lcvette> https://github.com
[11:18:07] <jthornton> I'm in a support chat for my hosting site atm
[11:18:24] <Lcvette> ok
[11:35:37] <Lcvette> https://vtk.org
[11:58:04] <jt-m[m]> the trackballcamera is so the motion follows the movement of the mouse, if that is turned off you get a roller coaster ride lol
[12:02:06] <Lcvette> ok
[12:02:08] <Lcvette> :(
[12:02:30] <jthornton> http://vtk.1045678.n5.nabble.com
[12:02:34] <jthornton> just reading this now
[12:02:35] <Lcvette> has to be someway to have touch screen panning
[12:02:59] <jthornton> touch screen panning works
[12:03:17] <jthornton> I think...
[12:10:24] <Lcvette> i just tried using the mouse and touch screen in combination and that didn't work
[12:10:25] <Not-e6c6> [02qtpyvcp] 07KurtJacobson created branch 03VTKCanon - 13https://git.io/fhCou
[12:10:25] <Lcvette> lol
[12:10:26] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 032 commits to 03VTKCanon [+1/-0/±4] 13https://git.io/fhxUE
[12:10:28] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 038c17b2c - WIP: remove all GL dependencies for GLCanonDraw
[12:10:29] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 036f0b45c - fix calculation of rotated WCS
[12:10:40] <Lcvette> what the...
[12:10:52] <Lcvette> where did that come from
[12:11:45] <jt-m[m]> outer space I think
[12:11:50] <Lcvette> lol
[12:12:12] <hazzy-m> lol
[12:12:20] -!- travis-ci has joined #hazzy
[12:12:21] <travis-ci> kcjengr/qtpyvcp#713 (VTKCanon - 6f0b45c : Kurt Jacobson): The build passed.
[12:12:21] <travis-ci> Diff view : https://github.com^...6f0b45c209c1
[12:12:21] <travis-ci> Build details : https://travis-ci.org
[12:12:21] -!- travis-ci has parted #hazzy
[12:14:33] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03VTKCanon [+0/-0/±1] 13https://git.io/fhxUz
[12:14:34] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 034c1c512 - user shorter names for tool length offsets
[12:15:28] <jt-m[m]> hazzy: is on a roll!
[12:17:40] <jt-m[m]> hmmm VTKCanon and VTKCannon branches?
[12:17:51] <jt-m[m]> one might shoot at you?
[12:17:59] <hazzy-m> yeah, that is bad ...
[12:18:14] * hazzy-m deserves it
[12:18:14] <hazzy-m> LOL
[12:19:21] <Lcvette> lcvette just reset to the enwest
[12:19:24] <Lcvette> newest
[12:19:26] <Lcvette> :D
[12:19:28] <Lcvette> hwat is it?
[12:19:33] <Lcvette> what
[12:20:19] <hazzy-m> VTKCanon is a rework of GLCanon with all the GL stuff removed
[12:20:43] <hazzy-m> VTKCannon still uses GLCanonDraw, so not sure why it was named VTKCannon lol
[12:21:08] <hazzy-m> Lcvette: stick to VTKCannon for now (the one with tow n's)
[12:22:38] <Lcvette> its too latye
[12:22:41] <Lcvette> :(
[12:24:18] * Lcvette uploaded an image: image.png (40KB) < https://matrix.org >
[12:24:47] <hazzy-m> its easy to go back
[12:25:11] <hazzy-m> right click on VTKCannon with the KCJ logo and reset local here, then force push
[12:26:22] <jt-m[m]> how did you make the kcj logo?
[12:26:43] * Lcvette uploaded an image: image.png (43KB) < https://matrix.org >
[12:26:47] <Lcvette> like this?
[12:27:28] <hazzy-m> go all the way down to the background gradient commit
[12:27:47] <hazzy-m> jt-m: just in inkscape
[12:28:18] <jt-m[m]> ah I've not played with inkscape in a long time lol
[12:28:33] * Lcvette uploaded an image: image.png (41KB) < https://matrix.org >
[12:28:39] <hazzy-m> it is gotten really nice
[12:28:49] <hazzy-m> Lcvette: perfect!
[12:29:02] <hazzy-m> sorry about the confusion
[12:29:13] <hazzy-m> from outer space
[12:29:14] <Lcvette> its ok
[12:29:15] <hazzy-m> lol
[12:29:18] <Lcvette> lol
[12:30:03] <jt-m[m]> if it came from me it has to go to outer space first lol
[12:30:19] <jt-m[m]> and if I read it came from outer space
[12:30:42] <hazzy-m> lol
[12:33:03] <Lcvette> how do we make the icon appear?
[12:33:09] <Lcvette> :D
[12:33:09] <Lcvette> is it quick and easy?
[12:33:41] <hazzy-m> Lcvette: yes, should be able to set it in designer
[12:33:52] <hazzy-m> the main window should have an icon setting
[12:33:52] <Lcvette> i tried to remember how i made happy face icon appear but can't remember.. madcow
[12:34:11] <hazzy-m> add it to the qrc file and then set it in designer
[12:34:15] <hazzy-m> should be all it takes
[12:38:49] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03VTKCanon [+0/-0/±1] 13https://git.io/fhxUN
[12:38:51] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 0394fe744 - general clean up
[12:42:42] <Lcvette> where would i be looking on the main window?
[12:45:05] * hazzy-m uploaded an image: image.png (22KB) < https://matrix.org >
[12:45:19] <hazzy-m> I think that will work
[12:49:01] * Lcvette uploaded an image: image.png (26KB) < https://matrix.org >
[12:49:04] <Lcvette> :D
[12:49:07] <Lcvette> hurray\
[12:49:17] <hazzy-m> Nice!!!
[12:51:13] <Lcvette> i lost color control of my vtk
[12:51:19] <Lcvette> it has a gradient now?
[12:52:04] <hazzy-m> yes, TurBoss added that
[12:52:15] <hazzy-m> I think you can change it in designer
[12:52:15] <Lcvette> that should be done in designer
[12:52:19] <Lcvette> not static
[12:52:42] <Lcvette> nope
[12:52:44] <Lcvette> can't change
[12:52:45] <hazzy-m> it can be
[12:52:57] <hazzy-m> there should be backgroundColor and backgroundColor2
[12:53:00] <hazzy-m> hmmm
[12:53:22] <Lcvette> mine are both set to black
[12:53:35] <Lcvette> would think that would make it solid black
[12:53:41] <Lcvette> but its gradient
[12:54:11] <hazzy-m> your right, it seems to be broken
[12:54:12] <hazzy-m> sek
[12:56:20] * Lcvette uploaded an image: image.png (18KB) < https://matrix.org >
[12:56:33] <Lcvette> can you just give it access to the stylesheet editor?
[12:56:43] <Lcvette> that has a gradient builder in it?
[12:57:11] <hazzy-m> well, you can set propertied thru QSS
[12:57:15] <hazzy-m> so yes
[12:59:48] * Lcvette uploaded an image: image.png (53KB) < https://matrix.org >
[13:00:20] <Lcvette> just like you select the color from the chooser you gave us, this gradient builder maybe could be an option also?
[13:01:12] <hazzy-m> not sure that is possible, since they different gradients
[13:02:32] <Lcvette> what do you mean?
[13:02:48] <Lcvette> i build them in here and have copied the result to the qss with success before
[13:03:15] <Lcvette> many of the qss gradients are from this builder
[13:03:37] <Lcvette> buttons for instsance
[13:04:26] <hazzy-m> I mean that those are QGradients, whereas the VTK renderer probably can't use QGradients natively
[13:04:49] <Lcvette> ah
[13:05:02] <hazzy-m> maybe we could make an image from the QGradient, and then set that as the VTK render background it that was realy important to you
[13:05:33] <Lcvette> i wqwas just trying to think of an easy way to let designers add gradients
[13:05:39] <Lcvette> im fine with black
[13:05:58] <Lcvette> actually prefer a flat color for the plotter as busy as it will be
[13:06:09] <hazzy-m> you can still add linear gradients using the two BG colors in designer
[13:07:51] <Lcvette> gotcha
[13:08:00] <Lcvette> how do i not add gradient
[13:08:01] <Lcvette> lol
[13:09:41] <hazzy-m> working on it
[13:31:59] * hazzy-m uploaded an image: image.png (63KB) < https://matrix.org >
[13:32:16] <Lcvette> nice
[13:32:21] <Lcvette> fixed?
[13:32:28] <hazzy-m> Lcvette: it seems to be working OK, but the color picker sometimes does not work, not sure why
[13:33:24] <hazzy-m> and now if no backgroundColor2 is set is does not use a gradient at all
[13:33:36] <hazzy-m> so you can get pure black etc.
[13:35:07] <Lcvette> sweet
[13:35:33] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03VTKCannon [+0/-0/±2] 13https://git.io/fhxkT
[13:35:35] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 03e701718 - don't use background gradient if no secondary color specified
[13:38:53] <Lcvette> when they are split like that i can't reset and discard changes can i ?
[13:39:35] <hazzy-m> see the little arrow next to pull?
[13:39:50] <hazzy-m> click that and chooser fast forward and you should be set
[13:39:50] <Lcvette> yes
[13:41:44] <Lcvette> no luck
[13:42:18] * Lcvette uploaded an image: image.png (55KB) < https://matrix.org >
[13:44:19] <roguish[m]> hazzy: is all this VTK stuff inside qtpyvcp repository? or a new special one?
[13:45:10] <hazzy-m> it is all inside the qtpyvcp repo, in fact it is only two relatively small files
[13:45:34] <roguish[m]> how do I see it? or get it? or whatever...
[13:46:18] <hazzy-m> the files are located in widgets/display_widgets/vtk_backplot
[13:46:46] <hazzy-m> if you are running from a git checkout then all you need to do is checkout the VTKCannon branch
[13:49:39] <roguish[m]> in gitkraken, all i see is qtpyvcp>master
[13:50:53] <hazzy-m> what do you have in the romotes section in the left column?
[13:50:57] <Lcvette> hazzy i don't thinkthe pull trick is woprking
[13:51:27] <Lcvette> rougish, can you screenshot?
[13:51:45] <Lcvette> paste into here
[13:52:09] * Lcvette uploaded an image: image.png (217KB) < https://matrix.org >
[13:52:18] <Lcvette> like that
[13:53:17] <Roguish> http://i.imgur.com
[13:53:42] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03master [+1/-0/±2] 13https://git.io/fhxk0
[13:53:43] <Not-e6c6> [02qtpyvcp] 07Lcvette 035b5576a - added icon for probe basic
[13:53:51] <hazzy-m> Roguish: thanks!
[13:54:02] <hazzy-m> you need to add the kcjengr remote
[13:54:36] <hazzy-m> hover over the remote section label and it shoud give a a green plus signe
[13:54:57] <hazzy-m> click that and in the box that shows up select kcjengr
[13:55:23] <hazzy-m> I'm not sure exactly how it will look for you, but it should be unambiguous
[13:55:39] <roguish[m]> gitlab or github ?
[13:55:45] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhxkV
[13:55:47] <Not-e6c6> [02qtpyvcp] 07traviscibot 032d11504 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[13:55:52] <hazzy-m> probbaly look like github/kcjengr
[13:56:07] <hazzy-m> github/kcjengr/qtpyvcp
[14:00:29] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03VTKTool [+0/-0/±1] 13https://git.io/fhxk6
[14:00:31] <Not-e6c6> [02qtpyvcp] 07TurBoss 03952e990 - remove unused line
[14:01:18] <hazzy-m> Lcvette: I put your last commit on master, rather than on VTKCannon
[14:01:43] <hazzy-m> rest your VTKCannon to the KCJ logo
[14:01:45] <Lcvette> ok
[14:02:52] <pcw_home> minor typo: file --> USB pane says "No Devide Found"
[14:03:22] <hazzy-m> pcw_home: oops, thanks!
[14:03:24] <Lcvette> hey peter
[14:03:56] <Lcvette> pcw_home: if you checkout the latest master, you can see the new icon
[14:03:57] <Lcvette> :D
[14:04:24] <pcw_home> Wonder if that pane should be dynamically created/destroyed based on USB FS availability
[14:05:00] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/fhxky
[14:05:02] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 03cb695a1 - fix typo in device combobox
[14:05:17] <pcw_home> that may be getting out the sandpaper before the chainsaw work is done however...
[14:05:36] <hazzy-m> pcw_home: yes, I agree, or at leased disabled
[14:07:09] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhxkQ
[14:07:10] <Not-e6c6> [02qtpyvcp] 07traviscibot 03c0ce4ed - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[14:11:46] <roguish[m]> pcw_home: Peter, Hey I need to swap the 7I27 (+ a few $$) for a pair of 7i40's. splitting the 50pin cable to use the 7i27would be a real headache.
[15:05:46] <pcw_home> OK
[15:43:18] <TurBoss> hello
[15:45:38] * jt-m[m] has a big ole pot of Texas Red simmering on the stove
[15:47:37] * hazzy-m gets in the truck to head to JTs place
[15:47:45] <hazzy-m> hey TurBoss !
[15:48:15] * TurBoss is working on blendercam...
[15:48:21] <TurBoss> :-)
[15:48:26] <jt-m[m]> come on over
[15:48:27] <hazzy-m> Nice!
[15:49:05] <jt-m[m]> getting close to merging vtk into master?
[15:49:08] <hazzy-m> jt-m: did you get much snow?
[15:49:17] <hazzy-m> closer ...
[15:49:34] <jt-m[m]> about 1/2" but it all melted
[15:49:47] <jt-m[m]> good thing cause it's going to be in the teens tonight
[15:50:05] <hazzy-m> that is a decent amount for this late in the year
[15:50:32] <hazzy-m> yeah, the same cool front it suposed to hit us a little later
[15:50:48] <hazzy-m> pooring rain right now :(
[15:50:49] <jt-m[m]> we have had huge snow storms in march before
[16:07:25] <TurBoss> I would like to finish the tool brach before merge
[16:07:41] <TurBoss> could be tested please?
[16:07:42] <TurBoss> :P
[16:07:56] <TurBoss> I'm not sure if tool offsets are correctly set
[16:08:05] <hazzy-m> TurBoss: I tested it last night, seems fine
[16:08:08] <TurBoss> need a second opinion
[16:08:20] <hazzy-m> I think the signe is right
[16:08:21] <TurBoss> cool!
[16:08:46] <TurBoss> so merge it to VTKCanon?
[16:09:04] <hazzy-m> sure!
[16:09:11] <hazzy-m> or VTKCannon
[16:09:11] <hazzy-m> lol
[16:09:22] <hazzy-m> two branches with basicaly the same name
[16:15:46] <TurBoss> oops
[16:15:56] <TurBoss> duno
[16:16:07] * hazzy-m fault
[16:16:12] <JT-Shop2> one shoots back if you've been bad lol
[16:16:29] <hazzy-m> JT-Shop2: LOL
[16:16:50] <hazzy-m> BTW, how are the cannons? You still shoot them?
[16:17:10] <JT-Shop2> first drawer done... next time I'll square the drawer up before the glue sets
[16:17:27] <JT-Shop2> yes, not as often as I did when I first built them
[16:17:57] <JT-Shop2> I just have one cannon, but I built two identical 1/2 scale 6 pounders
[16:21:21] <Lcvette> Is merge time?
[16:21:28] <Lcvette> :O
[16:24:41] <roguish[m]> JT-Shop2: hey, what's your store url?
[16:24:45] * JT-Shop knows he has a couple of 1/4-20 T nuts around somewhere... but where?
[16:24:54] <roguish[m]> mesausa usamesa ???
[16:24:54] <JT-Shop> mesaus.com spyderstore.com
[17:03:19] <roguish[m]> JT-Shop2: https://www.theguardian.com
[17:05:05] <hazzy-m> wow, that does not look good
[17:05:40] * TurBoss uploaded an image: image.png (328KB) < https://matrix.org >
[17:05:42] <TurBoss> lol
[17:06:50] <roguish[m]> hazzy: so when ya gonna merge the whole thang.
[17:07:11] <hazzy-m> that's gonna be cold ..
[17:07:28] <hazzy-m> roguish: soon, working on some optimizations
[17:07:56] <roguish[m]> a friendly word of advice: beware of scope creep.
[17:08:25] <jt-m[m]> glad all that crap went north of me
[17:08:53] <hazzy-m> yes, but memory usage is also important :)
[17:10:31] <roguish[m]> sure, but memory is cheap. optimization is good, but it's all gotta work first.
[17:12:23] <Lcvette> hahahahaha
[17:12:31] <Lcvette> thats what i said when you came in here asking for stuff
[17:12:33] <Lcvette> lol
[17:12:58] <hazzy-m> LOL
[17:13:20] <Lcvette> now he has the stuff he wanted and just wants it done
[17:13:24] <Lcvette> hahahahha
[17:13:34] <jthornton> last time I went to buy memory it was not cheap and anyway you can't add memory to a RPi
[17:13:59] <roguish[m]> no, not going to get into that one....
[17:14:17] * hazzy-m has only 2GB
[17:14:27] <TurBoss> hmmm just noticed that path cache need to be a defined long
[17:14:31] <jthornton> on your phone?
[17:14:40] <TurBoss> ahahhaah
[17:14:52] <hazzy-m> I have a lot more on my phone, LOL
[17:15:01] <hazzy-m> and an octacore
[17:15:13] <hazzy-m> my phone is a beast compared to my pc
[17:15:40] <roguish[m]> so build it all for your phone....... a linuxcnc phone app.
[17:15:45] * hazzy-m is going to start deving on his phone
[17:15:46] <jthornton> damn I just deleted my origin on the 7i96 repo on this pc
[17:15:59] <hazzy-m> oops
[17:16:09] <TurBoss> add it again
[17:16:50] <jthornton> I was trying to delete gl-pages cause I screwed that up
[17:16:59] <jthornton> I'll just clone in the morning
[17:17:06] <hazzy-m> I do have a python IDE on my phone for when I get bored
[17:17:14] <hazzy-m> but no games xD
[17:17:30] <jthornton> do you have a right click on your phone?
[17:18:25] <hazzy-m> you drop it ont he right side for right click, on the top for middle, and on the left side fro left
[17:18:38] * jthornton is trying to figure out how to publish sphinx docs on github for the 7i96
[17:19:06] <hazzy-m> jthornton: you can do it all with travis
[17:19:18] <jthornton> what is travis?
[17:19:22] <hazzy-m> look at the travis YAML file in qtpyvcp
[17:19:30] <hazzy-m> save you some data too
[17:19:42] <hazzy-m> https://travis-ci.org
[17:20:59] <jthornton> where is the travis yaml file at? I'm not finding it
[17:21:10] <hazzy-m> it is hidden
[17:21:23] <hazzy-m> .travis.yml in the top level dir
[17:21:25] <jthornton> ok
[17:21:43] <jthornton> reading it now
[17:21:54] <hazzy-m> it is much more complicated than you need though
[17:22:14] <hazzy-m> I can make you a basic example in a bit
[17:22:21] <jthornton> ok thanks
[17:23:23] * hazzy-m sent a long message: < https://matrix.org >
[17:23:34] <hazzy-m> that shoudl be al you need
[17:24:19] <jthornton> ok thanks
[17:25:06] <hazzy-m> add that to your .travis.yml file, and then create a travis acount with you github acount, then push and you should be good to go
[17:25:38] <hazzy-m> Oh, you;ll also have to add the $GH_TOKEN so travis can push to your ghpaghes branch
[17:26:35] <hazzy-m> then every time you push to your github repo travis will build and publish the docs for you
[17:27:17] <jthornton> I clicked join and I'm in and it shows me my public repositories page
[17:27:26] <jthornton> where do you add the token?
[17:27:44] <hazzy-m> great! sek
[17:27:53] <hazzy-m> you get the tocken on github
[17:28:40] <hazzy-m> go to https://github.com
[17:29:45] <hazzy-m> generate a new one, give it repo permissions (pull, push etc.), and name it GH_TOKEN
[17:29:54] <jthornton> ok
[17:29:58] <hazzy-m> then copy it and save it in a safe place
[17:30:14] <hazzy-m> you can only see it once on github
[17:30:21] <hazzy-m> then go to travis
[17:30:57] <jthornton> is token description where you put GH_TOKEN
[17:31:06] <hazzy-m> yes
[17:31:39] <hazzy-m> then go to https://travis-ci.org
[17:32:08] <hazzy-m> and scroll down to Environment Variables
[17:32:32] <hazzy-m> add a new one names GH_TOKEN and paste int he value you got from GH
[17:32:51] <hazzy-m> make sure to unckeck were it says display in build log
[17:33:07] <hazzy-m> and then click add and you should be set
[17:33:41] <TurBoss> hazzy: I did a merger to master attempt on my fork and went fine
[17:33:56] <hazzy-m> TurBoss: Fantastic!
[17:34:14] <TurBoss> if ok I'll push to master
[17:34:24] <hazzy-m> do you want to go aheas and push to master?
[17:34:28] <hazzy-m> sure!
[17:34:35] <TurBoss> ok
[17:34:40] <TurBoss> not much left
[17:34:56] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 03115 commits to 03master [+83/-3/±243] 13https://git.io/fhxqE
[17:34:57] <Not-e6c6> [02qtpyvcp] 07TurBoss 0334f396e - Merge branch 'VTKTool' into VTKCannon
[17:34:59] <Not-e6c6> [02qtpyvcp] 07TurBoss 0336ffefd - Merge branch 'VTKCanon' into VTKCannon
[17:35:00] <Not-e6c6> [02qtpyvcp] 07TurBoss 0378f708c - Merge branch 'VTKCannon'
[17:35:02] <TurBoss> done
[17:35:18] <hazzy-m> Hurray!
[17:36:27] <TurBoss> hmmmm ver broken
[17:36:34] <TurBoss> color 2 is not taking effect lol
[17:36:37] <TurBoss> :D
[17:36:59] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhxqg
[17:37:00] <Not-e6c6> [02qtpyvcp] 07traviscibot 0339f1895 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[17:37:02] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03master [+21/-0/±10] 13https://git.io/fhxq2
[17:37:03] <Not-e6c6> [02qtpyvcp] 07TurBoss 03761e91b - ENH: use VTK for gcode BackPlot back end
[17:37:22] <hazzy-m> oops
[17:37:24] <hazzy-m> lol
[17:37:25] <Lcvette> you did it?
[17:37:36] <TurBoss> its done
[17:38:18] <TurBoss> ok
[17:38:19] <hazzy-m> hmm, i wonder why that broke
[17:38:26] <TurBoss> don't worry
[17:38:28] <TurBoss> :D
[17:39:19] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhxqr
[17:39:21] <Not-e6c6> [02qtpyvcp] 07traviscibot 037ce474d - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[17:40:14] <hazzy-m> TurBoss: when no tool is loaded should it be a cone?
[17:40:26] <TurBoss> hmmm
[17:40:29] <TurBoss> maybe is broke
[17:40:38] <TurBoss> uhh forgot about that one
[17:41:14] <TurBoss> T0 is no tool?
[17:41:21] <hazzy-m> yes
[17:41:28] <TurBoss> ok
[17:46:38] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/fhxq6
[17:46:40] <Not-e6c6> [02qtpyvcp] 07TurBoss 03d9c400c - draw cone on tool 0
[17:48:46] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhxqP
[17:48:48] <Not-e6c6> [02qtpyvcp] 07traviscibot 0340d36bf - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[17:49:07] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/fhxqM
[17:49:08] <Not-e6c6> [02qtpyvcp] 07TurBoss 038e176e4 - set T0 offsets too
[17:51:08] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhxqH
[17:51:10] <Not-e6c6> [02qtpyvcp] 07traviscibot 0312eafd1 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[17:55:04] <hazzy-m> travis is not building, hmmm
[17:55:13] <hazzy-m> everything looks good
[17:55:53] <jt-m[m]> I keep having this file show up in gitkraken /home/john/qtpyvcp/examples/vtk_test/configs/vtk_test.qtpyvcp-messages.json
[17:56:29] <hazzy-m> just add it do the ignore
[17:56:53] <jt-m[m]> I did twice :(
[17:57:13] <hazzy-m> it if for the (as yet non existent) error history widget
[17:57:17] <hazzy-m> hmm
[17:58:03] <jt-m[m]> # persistent messages
[17:58:04] <jt-m[m]> sim/*messages.json
[17:58:05] <jt-m[m]> examples/vtk_test/configs/vtk_test/\.qtpyvcp-messages\.json
[17:58:24] <jt-m[m]> I tried examples/*messages.json too
[17:58:56] <hazzy-m> try *messages.json
[17:59:21] <jt-m[m]> ok
[18:00:37] <Not-e6c6> [02qtpyvcp] 07jethornton pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/fhxmf
[18:00:38] <jt-m[m]> that worked
[18:00:38] <Not-e6c6> [02qtpyvcp] 07jethornton 032eade1a - update gitignore
[18:01:15] * jt-m[m] uploaded an image: Screenshot at 2019-03-03 17-00-50.png (58KB) < https://matrix.org >
[18:01:34] <jt-m[m]> does that look correct?
[18:01:51] <hazzy-m> no, it should have built
[18:02:29] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhxmk
[18:02:31] <Not-e6c6> [02qtpyvcp] 07traviscibot 037e2d2ae - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[18:02:33] <hazzy-m> did you try triggering a build?
[18:02:48] <jt-m[m]> no
[18:03:18] <hazzy-m> ok, there it goes
[18:03:37] <hazzy-m> its booting up! Hurray!
[18:03:55] <jt-m[m]> your watching?
[18:05:15] <jt-m[m]> opps failed
[18:07:51] <jt-m[m]> gitkraken is not seeing my _sources directory
[18:10:10] <hazzy-m> ah you need a relative path
[18:10:47] <jthornton> err sources/_static
[18:11:03] <jthornton> git gui does not see it either
[18:12:38] <jthornton> where do I put that?
[18:17:28] <hazzy-m> you have `html_static_path = ['_static']` in you conf.py, so it should be fine
[18:17:44] <jthornton> yep
[18:18:14] <hazzy-m> can you build ok with this `sphinx-build -Wv docs/source docs/html` localy
[18:18:54] <Lcvette> .75
[18:19:42] <jthornton> The command "sphinx-build -Wv docs/source docs/html" exited with 2.
[18:20:07] <jthornton> I assume because the sources/_static directory is missing on github
[18:21:49] <hazzy-m> ah, it fails for me localy too
[18:21:54] <hazzy-m> `Warning, treated as error:
[18:21:54] <hazzy-m> html_static_path entry u'/home/kurt/dev/cnc/7i96/docs/source/_static' does not exist`
[18:22:17] <Lcvette> vtk is busted
[18:22:20] <Lcvette> :O
[18:22:46] <hazzy-m> jthornton: fixed by adding a _static dir
[18:22:54] <hazzy-m> do you use it?
[18:23:01] <hazzy-m> I gguess not, dhu
[18:23:25] <jthornton> not really
[18:24:02] * Lcvette uploaded an image: image.png (98KB) < https://matrix.org >
[18:24:11] <hazzy-m> jthornton: in conf.py change html_static_path = ['_static'] to html_static_path = []
[18:24:16] <Lcvette> i have floatycone
[18:24:19] <hazzy-m> that fixes it
[18:24:26] <jthornton> ok
[18:24:31] <TurBoss> Lcvette: tool offsets seems to be wrong
[18:24:42] <TurBoss> I'll fix but I need some time
[18:25:03] <Lcvette> 3 minutes?
[18:25:09] <Lcvette> :D
[18:25:10] <TurBoss> 33
[18:25:11] <TurBoss> lol
[18:25:31] <TurBoss> can you play changin tools?
[18:25:32] <Lcvette> 1.21 jiggawatts?
[18:25:37] <TurBoss> to see the brokeness?
[18:25:40] <jthornton> 33.33333333333333
[18:25:43] <Lcvette> yes
[18:25:50] <TurBoss> ^^
[18:26:08] <Lcvette> 1
[18:26:40] <TurBoss> https://youtu.be
[18:26:41] <jthornton> ohh auto build is working in travis now
[18:27:26] <jthornton> hazzy-m: hot damn got a green light
[18:27:33] <Lcvette> wait is g43 tool offset on or off
[18:27:39] <Lcvette> g49 g43
[18:27:43] <Lcvette> im madcowwing
[18:27:56] <hazzy-m> lol
[18:27:59] <hazzy-m> G43 is on
[18:28:09] <Lcvette> ok
[18:28:12] <Lcvette> lol
[18:28:13] * hazzy-m forgot about mad cow
[18:28:16] <Lcvette> denny crane
[18:28:33] <hazzy-m> jthornton: Hurray!!
[18:28:54] <hazzy-m> it even have you a ghpages branch
[18:29:04] <hazzy-m> what is the url?
[18:29:37] <jthornton> I'm not sure
[18:29:52] <hazzy-m> https://jethornton.github.io
[18:30:25] <jthornton> no css
[18:30:49] <hazzy-m> maybe you need the _static after all lol
[18:30:51] <jthornton> err not rtd theme
[18:30:54] <Lcvette> its phucked
[18:31:20] <hazzy-m> don't hate on it, its just looks like its fron the 90s
[18:31:32] <TurBoss> hhahahaa
[18:31:34] <jthornton> lol
[18:31:42] <TurBoss> good old 1.0 web
[18:31:44] <Lcvette> no VTK is tots PHUKT
[18:31:52] <TurBoss> what?
[18:32:16] <hazzy-m> it's safe to blame hazzy
[18:32:19] <jthornton> do I need to do something extra to get the rtd theme?
[18:32:30] <hazzy-m> no, you shouldn't
[18:33:03] <hazzy-m> you need the static though
[18:33:05] <hazzy-m> https://github.com
[18:33:13] <hazzy-m> not sure why you don't have it
[18:33:56] <jthornton> _static is in gh-pages for me
[18:34:43] <jthornton> https://github.com
[18:35:55] <hazzy-m> oh, so it should be fine
[18:35:56] <hazzy-m> hmmm
[18:36:53] <jthornton> I just put static back and pushed
[18:38:30] <jthornton> home/travis/build/jethornton/7i96/docs/source/_static' does not exist
[18:48:12] <Lcvette> https://youtu.be
[18:48:23] <Lcvette> probe basic vtk issue
[18:49:53] <TurBoss> I noticed...
[18:49:54] <TurBoss> :(
[18:50:30] <Lcvette> did it work before merge?
[18:50:43] <TurBoss> it seems no
[18:51:08] <TurBoss> tool offsets are wrong....
[18:51:40] <TurBoss> If I set 0 to Z offset
[18:51:56] <TurBoss> and click on save and tool doesn't reload
[18:52:54] <Lcvette> ?
[18:53:05] <Lcvette> \tool 0 has no offset
[18:54:03] <TurBoss> oh true
[18:54:08] <Lcvette> it appears it works but there is a glitch
[18:54:59] <Lcvette> when you change tools it is shooting the tool up to the machine zero
[18:55:14] <Lcvette> i think maybe its a work offset issue
[18:55:22] <TurBoss> nono is code issue
[18:55:30] <TurBoss> hmmm
[18:55:38] <Lcvette> the cone is not correct from the start
[18:57:33] * Lcvette uploaded an image: image.png (50KB) < https://matrix.org >
[18:57:52] <Lcvette> cone is above the zero point when its supposed to be on the crosshairs
[18:59:16] <Lcvette> hazzy, should it allow the program to load being it is above the z max height?
[19:08:25] * TurBoss uploaded an image: image.png (119KB) < https://matrix.org >
[19:08:32] <TurBoss> I'm working on it
[19:08:45] <Lcvette> hurray
[19:10:42] <TurBoss> by default it allways draws T1
[19:10:57] <TurBoss> I have to T1M6 the T0M6
[19:11:01] <TurBoss> to see the con
[19:11:02] <TurBoss> e
[19:11:11] <TurBoss> *then
[19:12:06] <Lcvette> where is the default code coming from?
[19:12:21] <TurBoss> it comes by T0
[19:12:46] <Lcvette> you say it always draws T1 by default
[19:12:54] <Lcvette> im asking what code causes that?
[19:13:07] <Lcvette> can it be changed to always draw T0 by default?
[19:13:26] <Lcvette> rather then hack around it drawing T1 by default?
[19:13:43] <jthornton> on boot up it should use T0 as no tool is loaded
[19:14:29] <Lcvette> correct
[19:15:11] <Lcvette> i think turboss is in the code trying to figure out how to fix it
[19:15:24] <TurBoss> yep
[19:15:26] <Lcvette> but it sounded like he was hacking around a default setting
[19:15:27] <TurBoss> I'm with it
[19:15:35] <TurBoss> yep
[19:15:37] <TurBoss> true
[19:15:37] <TurBoss> :D
[19:15:38] <Lcvette> rather then changing the default setting
[19:16:03] <Lcvette> can the default be changed turboss?
[19:16:18] <TurBoss> sek
[19:16:19] <TurBoss> pls
[19:22:50] <Lcvette> mark 33+ 27min = FAIL
[19:22:58] <Lcvette> hahaha
[19:22:58] <Lcvette> :D
[19:23:09] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/fhxYv
[19:23:10] <Not-e6c6> [02qtpyvcp] 07TurBoss 033bbf17e - cone z offset
[19:23:22] <TurBoss> what?
[19:23:34] <Lcvette> you said 33 minutes
[19:23:43] <TurBoss> ya...
[19:23:48] <TurBoss> well cone is fixed
[19:23:51] <Lcvette> 33x2
[19:23:53] <Lcvette> lol
[19:23:57] <Lcvette> :DS
[19:24:08] <TurBoss> it shows at boot
[19:24:12] <Lcvette> you did it?
[19:24:47] <TurBoss> yea
[19:25:10] <TurBoss> I think...
[19:25:14] <TurBoss> needs some test
[19:25:19] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhxYT
[19:25:21] <Not-e6c6> [02qtpyvcp] 07traviscibot 03caa8ea9 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[19:28:06] <Lcvette> the offsets are not negative
[19:28:10] <TurBoss> ok
[19:28:26] <Lcvette> tool still goes to the top after changing
[19:28:39] <Lcvette> cone is correct though at start up
[19:29:31] <TurBoss> ok
[19:30:17] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/fhxYq
[19:30:18] <Not-e6c6> [02qtpyvcp] 07TurBoss 03adf80db - correct tool z offset
[19:30:24] <TurBoss> I just noticed
[19:30:47] <TurBoss> if I change offsets on the tool table and save they don't take effect until restart
[19:31:58] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhxYY
[19:32:00] <Not-e6c6> [02qtpyvcp] 07traviscibot 035bdbd1b - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[19:33:21] <TurBoss> is hazzy arround
[19:33:38] <TurBoss> ?
[19:40:50] <Lcvette> the offset works but it requirres some extra steps it shouldn't
[19:41:02] <TurBoss> wich ones
[19:41:20] <Lcvette> the tool still shows displayed at the top of the cube after a chnaGE
[19:41:34] <Lcvette> AND REQUIRES YOU DO O A GO TO ZERO
[19:41:41] <Lcvette> whoops sorry
[19:41:43] <Lcvette> for the caps
[19:41:44] <TurBoss> ok
[19:42:06] <Lcvette> that would be wrong because it would be making the machine do moves to match the display
[19:42:08] <Lcvette> lol
[19:42:21] <Lcvette> then the machine would still be wrong from the display
[19:42:45] <TurBoss> ok
[19:42:59] <TurBoss> is just the position when they are created
[19:45:20] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/fhxYs
[19:45:22] <Not-e6c6> [02qtpyvcp] 07TurBoss 03457f549 - fix tool change
[19:47:15] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhxYG
[19:47:17] <Not-e6c6> [02qtpyvcp] 07traviscibot 03b3e48ee - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[19:47:58] <TurBoss> hazzy: tootltable needs to emit some signals on save to notce lcnc
[19:48:03] <TurBoss> that was a change
[19:48:10] <TurBoss> or somth
[19:49:13] <Lcvette> hurray the last one worked!
[19:49:20] <TurBoss> ty
[19:50:59] <Lcvette> works good now from my testing turboss!
[19:52:11] <TurBoss> cool
[19:52:49] * Lcvette uploaded an image: image.png (101KB) < https://matrix.org >
[19:53:16] * Lcvette uploaded an image: image.png (4KB) < https://matrix.org >
[19:53:26] <Lcvette> not quite to zero though
[19:54:42] <Lcvette> unless the program bounds are not at zero, but i don't know that because the origin doesn't move when the work offset is changed
[19:56:32] <TurBoss> pizza time
[19:57:48] <TurBoss> maybe a second origin is needed for the parts origin?
[20:40:16] <Lcvette> I dunno
[20:40:20] <Lcvette> Hazzy?
[20:52:26] <Lcvette> Pizzahut turboss?
[20:52:37] <hazzy-m> hey
[20:52:39] <TurBoss> yo
[20:53:03] <Lcvette> You said pizza time
[20:53:10] <Lcvette> Hey hazzy
[20:53:13] <TurBoss> its done long ago
[20:53:20] <Lcvette> Lol
[20:54:21] <TurBoss> trying to figure why windows prevent syncthing from working
[20:54:54] <Lcvette> Hazzy do you know about the origin and the work offset problem?
[20:55:05] * hazzy-m thought win prevented everything from working
[20:55:05] <Lcvette> Synching?
[20:55:25] <hazzy-m> syncthing is like a local dropbox
[20:55:33] <TurBoss> yup
[20:55:57] <TurBoss> https://syncthing.net
[20:56:10] <TurBoss> I use it to transfer programs to cnc or other stuff
[20:57:28] <Lcvette> How
[20:57:39] <TurBoss> install it on both machines
[20:57:58] <TurBoss> I have a local folder mapped to a remote folder in the machine
[20:58:23] <TurBoss> so whatever i put in that local folder goes to the remote
[20:58:27] <TurBoss> and the oposite
[21:00:51] <Lcvette> So o like a network?
[21:01:14] <Lcvette> Can Linux and windows worked network?
[21:01:17] <TurBoss> yes but also has versions so you can rollback
[21:01:31] <TurBoss> yes
[21:05:23] <Lcvette> Can l Linux and windows work wirerless network?
[21:05:52] <TurBoss> it does
[21:06:01] <Lcvette> Hurray
[21:07:16] <Lcvette> I can access from probe basic file page to load p programs?
[21:14:04] <TurBoss> it should be posible
[21:14:20] <TurBoss> if you mount you samba share first
[21:14:41] <Lcvette> Don't what that is
[21:15:46] <TurBoss> samba di janeiro
[21:15:47] <Lcvette> Does Linux not just have a shared network folder I could access from the drop down
[21:15:50] <TurBoss> smb is the windows share
[21:15:59] <Lcvette> Ok
[21:16:09] <TurBoss> you must create it
[21:16:20] <TurBoss> I don't know if lcnc iso comes with samba suport
[21:17:05] <TurBoss> open a file manager
[21:17:22] <TurBoss> and try to navigate to the network folder
[21:18:27] <Lcvette> I doesn't have network setup
[21:18:32] <TurBoss> ah
[21:18:42] <Lcvette> I will have to learn how to setup a network
[21:18:44] <Lcvette> Lol
[21:18:50] <TurBoss> plug a wire
[21:18:51] <TurBoss> :D
[21:18:54] <Lcvette> For now USB stick is ok
[21:21:24] <Lcvette> I was just thinking out loud, would be nice to just save from fusion to a folder and have access without the USB
[21:21:33] <Lcvette> But that is not urgent
[21:21:45] <TurBoss> install syncthing on both computers
[21:21:49] <TurBoss> then link both
[21:22:11] <TurBoss> your programs will fly to the cnc
[21:22:41] <TurBoss> I do that way
[21:22:50] <TurBoss> not only for programs
[21:22:54] <TurBoss> a lot of things