#hazzy | Logs for 2019-03-06

Back
[00:09:02] <hazzy-m> Nice!
[00:09:47] * hazzy-m installs riot
[00:09:51] <TurBoss> cool
[00:09:59] <TurBoss> did the merge?
[00:10:12] <hazzy-m> not yeat
[00:10:17] <TurBoss> ok
[00:10:24] <hazzy-m> fixing the tool offsets :0
[00:10:26] <hazzy-m> :)
[00:10:31] <TurBoss> cool!
[00:10:41] <TurBoss> so the signal fires on save?
[00:10:56] <hazzy-m> that should be fixed
[00:11:10] <hazzy-m> now working on making the tool move when you issue G43
[00:11:15] <hazzy-m> or G49
[00:11:25] <TurBoss> amazing! thank you
[00:11:51] <hazzy-m> your welcome!
[00:14:50] <hazzy-m> flatpack is slow ...
[00:21:49] * hazzy-m is on the desktop riot
[00:21:56] <hazzy-m> it is much faster
[00:21:59] <hazzy-m> nice!
[00:22:04] <TurBoss> cool!
[00:35:28] <Lcvette> Nice!!!
[00:42:41] <Lcvette> Turboss, you started looking at dynatc again?
[00:42:55] <Lcvette> :D
[00:43:13] <TurBoss> i hop jt gives me a hand
[00:43:19] <TurBoss> :D
[00:43:39] <Lcvette> Getting close to test it on the machine, maybe that will help with the signal feedback
[00:44:41] <TurBoss> he did an amazing work with the vtk thing (also hazzy )
[00:44:50] <Lcvette> Yeah!!
[00:44:55] <Lcvette> He did good work
[00:44:58] <hazzy-m> JT is amazing!
[00:45:06] <Lcvette> Everyone is amazing
[00:45:09] <hazzy-m> very quick to learn
[00:45:13] <Lcvette> Things are coming together
[00:45:19] <hazzy-m> he puts hazzy to shame
[00:45:25] <hazzy-m> lol
[00:45:52] <Lcvette> Team
[00:46:05] * hazzy-m is amazint at writing bugs
[00:46:06] <hazzy-m> xD
[00:46:16] <TurBoss> :)
[00:46:22] <Lcvette> And then fixing them
[00:46:40] <hazzy-m> sometimes lololo
[00:48:40] <Lcvette> What are you sick on in dynatc?
[00:48:43] <Lcvette> Stuck
[00:48:49] <Lcvette> I forgot
[00:49:13] <TurBoss> me too
[00:49:14] <TurBoss> :D
[00:49:17] <Lcvette> Lol
[00:49:35] <Lcvette> Maybe the new thing hazzy did will help?
[00:49:55] <TurBoss> the new tool signals could help
[00:50:02] <Lcvette> Yeah
[00:50:09] <Lcvette> :D
[00:50:22] <Lcvette> Maybe JT knows some secrets too
[00:54:04] <Lcvette> Hazzy, what's left after vtk?
[00:54:42] <hazzy-m> settings, which will fic the jog speed sliders and the few remaining things
[00:55:10] <Lcvette> That's it?
[00:55:23] <Lcvette> :O
[01:01:13] <hazzy-m> yes, then it should be fully usable
[01:01:21] <Lcvette> Hurray!!!
[01:01:32] <hazzy-m> just clean up stuff after that, but thats not important
[01:01:41] <hazzy-m> we have don't all the realy hard stuff
[01:01:49] <Lcvette> Yeah
[01:02:08] <Lcvette> Worry about the probe after it's up and running
[01:02:44] <Lcvette> It will be fun doing the probe routines then
[01:02:58] <Lcvette> Will be full circle, that's what we started on..lol
[01:05:08] <hazzy-m> haha, yes
[01:05:27] <hazzy-m> your first question to me was how to add probing to Gmoccapy
[01:05:32] <hazzy-m> HURRAY!!
[01:05:37] <hazzy-m> got the offsets fixed!
[01:05:37] <Lcvette> Hurray
[01:05:39] <hazzy-m> finaly
[01:05:45] <Lcvette> Whoo hoo!!!
[01:05:47] <TurBoss> great!!!
[01:06:21] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03VTK_TT [+0/-0/±1] 13https://git.io/fhpIj
[01:06:22] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 038fe3083 - update tool offsets for G43/G49
[01:06:36] <Lcvette> Hurray!!!
[01:06:37] <hazzy-m> TurBoss: are you still awake?
[01:06:49] <hazzy-m> can you test the tool offsets?
[01:06:49] <TurBoss> xD
[01:06:55] <hazzy-m> I think i fixed them
[01:06:58] <TurBoss> sure
[01:07:03] <hazzy-m> thanks!
[01:08:27] <TurBoss> hurray!!!!!
[01:08:35] <Lcvette> Hurray!!!
[01:08:39] <hazzy-m> hurray!
[01:08:42] <Lcvette> Lol
[01:08:44] <TurBoss> but..
[01:08:45] <TurBoss> :D
[01:08:50] <Lcvette> :O
[01:09:09] <TurBoss> if I change the offset and click save it doesn't do anything
[01:09:14] <Lcvette> 😐
[01:09:24] <hazzy-m> no, you need to run g43 again
[01:09:32] <TurBoss> ahhh
[01:09:33] <TurBoss> ok
[01:09:41] <TurBoss> cool!
[01:10:11] <Lcvette> 🐼
[01:10:15] <hazzy-m> I orgininaly had it so it updated, but that was not accurate because LCNC needs to to run G43 again to update
[01:10:24] <TurBoss> -1 goes right while 1 goes left
[01:10:27] <TurBoss> is that ok?
[01:10:50] <hazzy-m> it seemsto folow the right path, so I think so
[01:11:00] <hazzy-m> ot seems backwards though ...
[01:11:09] <Not-e6c6> [02qtpyvcp] 07KurtJacobson created branch 03VTK_TT 13https://git.io/fhpLU
[01:11:20] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 036 commits to 03VTKCanon [+34/-0/±8] 13https://git.io/fhpLT
[01:11:22] <hazzy-m> oops
[01:11:22] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 03647b1d9 - Merge branch 'VTK_TT' into VTKCanon
[01:12:41] <Not-e6c6> [02qtpyvcp] 07KurtJacobson created branch 03VTKCanon 13https://git.io/fhpLk
[01:12:58] <hazzy-m> oops
[01:13:00] <TurBoss> Y is okish
[01:13:01] <Lcvette> -1 table should go right
[01:13:26] <TurBoss> 1 y offset goes +Y
[01:13:35] <TurBoss> -1 x goes +X
[01:13:45] <TurBoss> not sure
[01:13:49] <TurBoss> if ok or what
[01:14:33] <TurBoss> now pathcachee need some fix
[01:14:37] <TurBoss> my task
[01:14:44] <hazzy-m> if you run the program it folows the path, right?
[01:15:32] <hazzy-m> oops, no there is a problem :(
[01:15:50] <Lcvette> :(
[01:20:16] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03VTKCanon [+0/-0/±1] 13https://git.io/fhpLL
[01:20:18] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 03f732d8b - fix y axis tool offset sign
[01:21:56] <Lcvette> Fixed?
[01:21:58] <hazzy-m> those signs are really confusing because of the transformation
[01:21:59] <Lcvette> Hurray?
[01:22:05] <hazzy-m> yes, should be
[01:22:11] <TurBoss> ya...
[01:22:13] <TurBoss> ok
[01:22:14] <Lcvette> Hurray!!
[01:22:44] <hazzy-m> and the cone transform is not the same as the cylinder lol
[01:22:59] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 0323 commits to 03master [+55/-4/±31] 13https://git.io/fhpLY
[01:23:01] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 033f20e80 - Merge branch 'VTKCanon'
[01:23:03] <TurBoss> it works!
[01:23:10] <TurBoss> thanks!
[01:23:11] <hazzy-m> the deed is done ...
[01:23:15] <hazzy-m> hurray!
[01:23:23] <Lcvette> Hurray¡!!!!!!!!!!
[01:23:31] <TurBoss> 🎉
[01:23:44] <hazzy-m> :bomb:
[01:24:34] * TurBoss goes to hunt some food
[01:24:39] <Lcvette> 🍺🍻🍻🍻
[01:24:56] <Lcvette> Lcvette gets some almonds
[01:25:05] * hazzy-m goes to sleep
[01:25:06] <TurBoss> ahm ahm
[01:25:09] <TurBoss> n8
[01:25:10] <TurBoss> ty
[01:25:11] <TurBoss> !!
[01:25:13] <Lcvette> The anxiety made me hungry
[01:25:22] <hazzy-m> your very welcome!
[01:25:25] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhpLO
[01:25:27] <Not-e6c6> [02qtpyvcp] 07traviscibot 03aca5019 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[01:25:34] <hazzy-m> amazing work on VTK!
[01:25:43] <TurBoss> :D
[01:27:54] <Lcvette> Great work!!!
[01:29:07] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 035 commits to 03master [+0/-0/±12] 13https://git.io/fhpLZ
[01:29:09] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 032bb0239 - Merge branch 'VTKProperties'
[01:29:33] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03VTKCanon - 13https://git.io/fhCou
[01:29:34] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03VTKCanon
[01:29:47] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03VTK_TT - 13https://git.io/fhCou
[01:29:49] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03VTK_TT
[01:30:11] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03VTKProperties - 13https://git.io/fhCou
[01:30:12] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03VTKProperties
[01:30:39] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03VTKCannon - 13https://git.io/fhCou
[01:30:40] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03VTKCannon
[01:30:53] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03VTKTool - 13https://git.io/fhCou
[01:30:55] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03VTKTool
[01:30:55] <Lcvette> Wowowow!!
[01:30:56] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhpLn
[01:30:57] <Not-e6c6> [02qtpyvcp] 07traviscibot 035e478fb - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[01:31:11] <hazzy-m> whew
[01:31:24] <hazzy-m> time for bed for real
[01:31:24] <hazzy-m> gn8
[01:31:32] <Lcvette> Night!!
[06:28:49] <jt-m[m]> morning
[08:15:04] <Lcvette> morning
[08:15:09] <Lcvette> big things happened last night!
[08:15:11] <Lcvette> :D
[08:15:34] <Lcvette> look at JT with his new emblem!!
[08:23:34] <jt-m[m]> what's up today
[08:26:50] <Lcvette> just doing the new things i did yesterday but in the real version
[08:27:00] <Lcvette> the toggle fixes andini update
[08:27:02] <Lcvette> :D
[08:27:36] <Lcvette> what was the [] portion that was missing?
[08:27:44] <Lcvette> [VTK_Actions}
[08:27:46] <Lcvette> ?
[08:28:22] <jt-m[m]> oh in the ini file it's [VTK]
[08:28:53] <jt-m[m]> that is the start of the section up to the next [SOMENAME]
[08:29:12] <Lcvette> boom! working again!
[08:31:39] <jt-m[m]> cool!
[08:32:04] <Lcvette> hazzy and turboss got everything fixed last night with the backplotter
[08:32:07] <Lcvette> :d
[08:32:12] <Lcvette> we think at least
[08:32:17] <jt-m[m]> I saw that
[08:32:26] <jt-m[m]> just need some testing
[08:32:39] <jt-m[m]> I need to change bp_touch
[08:33:35] <Lcvette> just pushed all the fixes in Probe Basic
[08:33:42] <Lcvette> with your new toggles!
[08:33:43] <Lcvette> :D
[08:33:52] <Lcvette> so it should load now again
[08:33:55] <jt-m[m]> Sweet!
[08:44:42] * Lcvette uploaded an image: image.png (29KB) < https://matrix.org >
[08:44:52] <Lcvette> is it supposed to round corners like this?
[09:01:41] <hazzy-m> Morning
[09:01:43] <hazzy-m> Yrs
[09:02:12] <hazzy-m> That's the path follow tolerate set very high
[09:06:03] <JT-Shop> morning
[09:06:22] <JT-Shop> lol booster is still charging but almost done I think
[09:08:01] <hazzy-m> JT-Shop: is it Li-Ion?
[09:08:20] <JT-Shop> Lithium
[09:08:35] <JT-Shop> clamps weigh more than the booster lol
[09:08:46] <hazzy-m> Nice!
[09:09:27] <hazzy-m> it can serve double duty as a bomb and booster!
[09:09:42] <hazzy-m> (i guess only if it was made by samsung lol)
[09:09:59] <JT-Shop> Noco Genius
[09:10:22] <JT-Shop> 7000 joules lol
[09:10:31] <JT-Shop> that's gotta hurt
[09:16:38] <Lcvette> hazzy: where is it being set?
[09:18:22] <Lcvette> the tolerance?
[09:19:51] <roguish[m]> JT-Shop: hey, I picked up 2 motor drivers yesterday at PCW's.. 7I40's
[09:24:49] <Lcvette> roguish: hey did you ever decide on a machine?
[09:25:47] <roguish[m]> Lcvette, no, i'm strickly still shopping. though I got a call yesterday to modify a small timing pulley for a company I used to work with.
[09:26:57] <roguish[m]> Lcvette, Hey I updated this riot thing and lost linuxcnc and linuxcnc-devel. how do I get 'em back?
[09:27:13] <Lcvette> just tossing it out, but haas is running a pretty great special for their dm and dt series machines
[09:27:26] <Lcvette> from updating riot?
[09:27:34] <hazzy-m> Lcvette: you have to set it in the gcode file using G64 P<tolerance> or in the RS274 init code in the INI
[09:28:15] <Lcvette> yeah i looked and didn't see an init string in the ini or a setting in the file calling for the g64
[09:28:36] <Lcvette> guessing it was from yesterdays experimenting?
[09:29:22] <Lcvette> i changed it manually in the mdi and it stayed persistent when i reran the code and it followed corners to assigned p value
[09:29:24] <Lcvette> :D
[09:31:02] * hazzy-m uploaded an image: image.png (2016KB) < https://matrix.org >
[09:31:16] <hazzy-m> fail
[09:31:44] * hazzy-m uploaded an image: image.png (502KB) < https://matrix.org >
[09:32:20] <Lcvette> hazzy not a haas fan?
[09:32:49] <hazzy-m> the machines are ok, support is terrible
[09:33:24] <Lcvette> https://www.haascnc.com
[09:33:37] <Lcvette> on special for $39k
[09:33:50] <Lcvette> sidemount atc and 10k spindle
[09:33:52] <hazzy-m> 7 months to replace a failed linear rail on a 4yr old machine
[09:34:35] <Lcvette> do yourself
[09:34:35] <hazzy-m> wow! That is very competative
[09:34:39] <Lcvette> out of warranty anyhow
[09:35:27] <Lcvette> cheaper to buy the tools to do it yourself than pay someone to do it anyhoww
[09:38:35] <hazzy-m> yeah but you don't always have the luxury of being able to do it your self
[09:39:03] <jt-m[m]> Lcvette: note that the RS274NGC_STARTUP_CODE is only for when you boot up and it can be over written with G code
[09:39:17] <jt-m[m]> http://linuxcnc.org
[09:39:24] <Lcvette> if it is your only production machine, you probably have little else to do but fix it if its down
[09:39:26] <Lcvette> lol
[09:39:47] <hazzy-m> Is the start up code applied after an M2?
[09:40:12] <Lcvette> JT: yup, im with ya! was just thinking the current ini doesn't have any start up code
[09:41:03] * Lcvette uploaded an image: image.png (14KB) < https://matrix.org >
[09:41:14] <hazzy-m> it would have taken the haas guys a few minutes to fix it if they had ever come with the right tools and parts lol
[09:41:57] <hazzy-m> the service techs in ATL are really bad for some reason, the tech the serves north GA is fantastic
[09:42:27] * pcw_home is sad VTK wont run on his crufty old hardware
[09:42:29] <JT-Shop> Roguish: you converting a machine?
[09:42:53] <hazzy-m> pcw_home: what are you running it on?
[09:43:19] <pcw_home> Dont laugh: Core Duo
[09:44:06] <pcw_home> the built in Intel graphics dont have a OpenGL 2.1 driver
[09:44:38] <pcw_home> ( which is apparently the minimum for VTK )
[09:44:52] <Lcvette> i run a core duo!
[09:44:56] <hazzy-m> I have LCNC instaled on a Core Duo machine, lowest latency I have ever got with RTAI
[09:44:56] <Lcvette> :D
[09:45:43] <pcw_home> Probably a video card would fix things
[09:46:11] <Lcvette> so we have an issue?
[09:46:13] <hazzy-m> pcw_home: did you install VTK with pip?
[09:46:25] <hazzy-m> VTK has been around for ages (late 90s early 2000s) so you might be able to use the apt version and get better results
[09:46:25] <Lcvette> or we just are saying its time to upgrade for those running old machines?
[09:46:58] <pcw_home> Yes installed with PIP
[09:47:42] <pcw_home> this is around 2007 vintage so ~12 years...
[09:48:04] <hazzy-m> I'll did out my core duo and do some experimenting
[09:50:09] <JT-Shop> https://qtpyvcp.kcjengr.com
[09:50:29] <JT-Shop> should we drop the (development only) part as it's needed to build a vcp
[09:56:47] <TurBoss> Lcvette: G64 P0.001
[09:56:48] <TurBoss> to get exact mode
[09:59:03] <Lcvette> yeah thats what i run in my init string
[09:59:35] <Lcvette> morning turboss!
[10:00:20] <TurBoss> hello!
[10:03:50] <Lcvette> turboss i was looking back to see where we were having issues with the DYNATC and i think it was because of testing it and the feedback sensors from the M6 Remap
[10:05:39] <Lcvette> hazzy: i updated probe basic with JT's new toggles and it loads now is you want to merge them
[10:06:07] <Lcvette> also added the items to the ini
[10:06:30] <Lcvette> the buttons for the toggles are on the customs tab where the jog buttons are
[10:10:23] <hazzy-m> Lcvette: great!
[10:11:14] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03master [+0/-0/±2] 13https://git.io/fhpcJ
[10:11:15] <Not-e6c6> [02qtpyvcp] 07Lcvette 039ef1778 - updated to JT's vtk button toggle settings so PB launches and works
[10:13:25] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhpcI
[10:13:26] <Not-e6c6> [02qtpyvcp] 07traviscibot 03c30665f - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[10:45:48] <roguish[m]> hey, how can I add the linuxcnc at freenode back to riot?
[10:46:36] <TurBoss> roguish:
[10:46:45] <TurBoss> start a chat with @appservice-irc:matrix.org
[10:46:54] <TurBoss> the send !help
[10:46:57] <TurBoss> then*
[10:48:15] <TurBoss> send to him !join #linuxcnc
[10:49:08] <roguish[m]> isn't there already and easy address for the room?
[10:49:27] <roguish[m]> seems like that's what I had before.
[10:49:30] <TurBoss> #freenode_#linuxcnc:matrix.org
[10:49:43] <roguish[m]> that's it. gracious
[11:05:56] * Lcvette uploaded an image: qtpyvcp_icon.png (393KB) < https://matrix.org >
[11:06:03] <Lcvette> icon?
[11:14:13] <jt-m[m]> hazzy what was that link to the resaw blade?
[11:26:57] <Lcvette> https://www.highlandwoodworking.com
[11:27:04] <Lcvette> this one?
[11:27:10] <Lcvette> JT: ?
[11:31:08] <JT-Shop> yea that one, thanks
[11:31:15] * Lcvette uploaded an image: image.png (484KB) < https://matrix.org >
[11:31:22] <Lcvette> icon?
[11:32:37] <Lcvette> no?
[11:33:01] <JT-Shop> can't see it here, give me a bit to stoke my fires
[12:08:24] <Lcvette> no?
[12:08:56] <Lcvette> hazzy?
[12:09:09] <Lcvette> give me some direction if you don't approve
[12:10:50] <jt-m[m]> looks fancy to me 😎
[12:12:33] <TurBoss> is cool
[12:17:23] <Lcvette> hurray!
[12:17:44] <Lcvette> fearless leader?
[12:17:52] <Lcvette> hazzy: ?
[12:21:14] <hazzy-m> Yes, it is good!
[12:21:38] * hazzy-m is away and is freezing
[12:22:51] <Lcvette> where you go?
[12:24:26] <JT-Shop> hill climbing?
[12:34:14] <TurBoss> he is in away a cool place ti stay
[12:49:50] * hazzy-m uploaded an image: 1551894572616.jpg (50KB) < https://matrix.org >
[12:49:53] <hazzy-m> Argggg
[12:50:05] <hazzy-m> Hate it when that happens
[12:57:21] * TurBoss uploaded an image: 20190306_185647.jpg (209KB) < https://matrix.org >
[12:57:37] <TurBoss> i own a gun
[12:57:41] <TurBoss> hurray
[12:57:48] <hazzy-m> Nice!
[12:57:49] <hazzy-m> Lol
[13:02:12] <Lcvette> nice
[13:02:21] <Lcvette> its too cold for carpentry hazzy
[13:02:28] <Lcvette> its coding weather
[13:02:35] <Lcvette> :D
[13:03:22] <TurBoss> lol
[13:11:24] * JT-Shop has broken his new store and just wanders off to ponder
[13:19:28] <jt-m[m]> hazzy: dremel time?
[13:19:56] <jt-m[m]> mighty small bullets?
[13:20:16] <hazzy-m> Fein time :)
[13:21:13] <jt-m[m]> Federal Employer Identification Number?
[13:21:27] * hazzy-m uploaded an image: 1551896438927.jpg (303KB) < https://matrix.org >
[13:21:44] <jt-m[m]> ah yes
[13:22:33] <jt-m[m]> is that plywood facing on the chop saw fence?
[13:22:49] <hazzy-m> Yes
[14:32:46] * hazzy-m is back
[14:40:15] * jt-m[m] uploaded an image: VectorImage_2019-03-06_013959.jpg (34KB) < https://matrix.org >
[14:40:35] <jt-m[m]> JT has a pistol too
[14:43:31] <jt-m[m]> and just figured out how to take a photo in riot on the phone lol
[14:50:50] * Lcvette uploaded an image: IMG_20190306_145023397.jpg (29KB) < https://matrix.org >
[14:51:13] <Lcvette> Lcvette only has a pew pew laser gun
[14:51:17] <hazzy-m> JT: Nice! What ammo does it use?
[14:51:39] <hazzy-m> its a mouse, LOL
[14:52:46] <JT-Shop> that one is a .44 magnum, love the long barrel on it
[14:58:10] <TurBoss> loool
[14:59:34] <Lcvette> hazzy, did you put that program in the examples file or forget?
[15:00:05] <hazzy-m> nice! I guess .44 magnum is kinda the standard revolver cartridge
[15:00:11] <hazzy-m> Lcvette: I forgot
[15:00:17] * hazzy-m is sheepish
[15:00:25] <Lcvette> lol.... ok
[15:00:38] <Lcvette> turboss
[15:00:49] <JT-Shop> I have a couple of .357 magnum revolvers and a .22 with owls head grips
[15:00:50] <TurBoss> yo
[15:00:53] <Lcvette> you have a good program for examples?
[15:01:16] <TurBoss> to see path?
[15:01:20] <Lcvette> that looks cool?
[15:01:22] <TurBoss> cimcoedit 8
[15:01:26] <Lcvette> for video
[15:01:31] <Lcvette> demo
[15:01:34] <JT-Shop> look in the linuxcnc example directory
[15:01:37] <TurBoss> or camotics <- opensource
[15:01:38] <Lcvette> update
[15:01:39] <hazzy-m> Lcvette: adding right now
[15:01:42] <Lcvette> been a while since one was made
[15:01:54] <Lcvette> hurray!
[15:02:35] <Lcvette> hazzy is home?
[15:02:40] <Lcvette> out of the cold?
[15:03:44] <Lcvette> JT-Shop: there aren't really cool ones in there with more modern tool paths that i saw
[15:07:58] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03master [+3/-0/±0] 13https://git.io/fhpBQ
[15:08:00] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 039e7d3c6 - add example g-code files
[15:09:35] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhpBd
[15:09:37] <Not-e6c6> [02qtpyvcp] 07traviscibot 03f87af7a - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[15:09:58] <JT-Shop> modern tool path? what is that?
[15:11:41] <Lcvette> hazzy: what did you name it and where did you put it?
[15:11:42] <TurBoss> volumill?
[15:11:55] <Lcvette> yeah
[15:11:56] <Lcvette> hsm
[15:12:01] <Lcvette> 3d hsm
[15:12:10] <TurBoss> /sim/example/
[15:12:14] <hazzy-m> they are in the sim/example_gcode folder
[15:16:33] <JT-Shop2> chips is cooler than hsm lol
[15:19:09] <TurBoss> hazzy: should we merge pydm ack
[15:19:10] <TurBoss> ?
[15:23:10] <TurBoss> Lcvette: whats next?
[15:23:26] <TurBoss> what**
[15:23:30] <TurBoss> :^)
[15:24:17] <Lcvette> dynatc?
[15:24:17] <Lcvette> :D
[15:24:21] <TurBoss> yes
[15:24:41] * jt-m[m] uploaded an image: VectorImage_2019-03-06_022415.jpg (35KB) < https://matrix.org >
[15:24:48] <TurBoss> JT something left on vtk?
[15:25:03] * jt-m[m] has to move a ton of crap to get the splitter out
[15:25:19] <jt-m[m]> Let me check
[15:25:26] <TurBoss> don't worry
[15:26:07] <Lcvette> hello
[15:26:48] <Lcvette> riot just updated on linuxcnc.. now is broken
[15:26:53] <Lcvette> :(
[15:26:55] <TurBoss> hi
[15:27:20] <TurBoss> why?
[15:27:40] <TurBoss> I mean how?
[15:27:40] <Lcvette> wait maybe working now?
[15:27:44] <Lcvette> yes working now
[15:27:49] <TurBoss> cool!
[15:27:53] <Lcvette> had to restart it
[15:31:43] * Lcvette uploaded an image: vtk_pb_example.png (335KB) < https://matrix.org >
[15:36:05] <Lcvette> whoah, hazzy cuts slow
[15:36:15] * hazzy-m was real proud of that part, first thing he surface modled
[15:38:05] <TurBoss> cool!
[15:38:08] <Lcvette> 15ipm
[15:38:13] <Lcvette> 1970 rpm
[15:38:30] <Lcvette> what material?
[15:38:37] <Lcvette> alum?
[15:39:34] <hazzy-m> yes, it was a vacuum forming mold
[15:39:48] <hazzy-m> my top spindle speed was 1970, fixed now :)
[15:39:56] <Lcvette> hahaha
[15:40:00] <hazzy-m> should speed those up a bit ..
[15:40:06] <Lcvette> yes!
[15:40:14] <Lcvette> have coolant?
[15:40:26] <hazzy-m> not yet
[15:40:30] <Lcvette> enclosure?
[15:40:38] <hazzy-m> no
[15:40:41] <Lcvette> mist?
[15:41:06] <hazzy-m> no lol
[15:41:10] <hazzy-m> no nothing
[15:41:11] <TurBoss> hazzy: where I should place the ATC thing in widgets
[15:41:18] <hazzy-m> WD40 in a spray bottle
[15:41:42] <hazzy-m> I guess display?
[15:41:43] <TurBoss> input display?
[15:41:44] <hazzy-m> yeah, that it good
[15:41:45] <Lcvette> hazzy at least needs a mist cooling sprayer
[15:41:57] <TurBoss> ok
[15:42:07] <hazzy-m> hmmm, it is more input or more display?
[15:42:11] * TurBoss does a pool
[15:42:23] <TurBoss> duno
[15:42:24] <TurBoss> :D
[15:42:26] <TurBoss> display?
[15:42:42] <hazzy-m> flip a coin lol
[15:42:50] <TurBoss> Lcvette:
[15:43:00] <TurBoss> Glenda: flip a coin
[15:43:00] <Lcvette> dunno?
[15:43:09] <TurBoss> she is sleeping
[15:43:22] <Lcvette> its a function widget
[15:43:30] <Lcvette> no its a display widget
[15:43:46] <Lcvette> because its really only displaying the actuation of the tool changer no?
[15:43:53] <TurBoss> yes
[15:43:54] <Lcvette> so display widget?
[15:43:55] <TurBoss> thats
[15:43:57] <Lcvette> hurray!
[15:43:58] <TurBoss> cool thanks
[15:44:03] <Lcvette> we spocked it out
[15:44:09] <Lcvette> with logic
[15:45:29] <Lcvette> hazzy: https://www.amazon.com
[15:46:34] * hazzy-m needs to get one of those
[15:46:47] <hazzy-m> I have an air line run to the mill for it lol
[15:47:08] <Lcvette> its dirt cheap
[15:47:11] <Lcvette> better than wd
[15:47:12] <Lcvette> get a solenoid for the air line
[15:47:22] <Lcvette> control with lcnc
[15:47:36] <TurBoss> cool!
[15:47:39] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/fhpR5
[15:47:41] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 034fd6590 - speed up bezel example code feeds and speeds
[15:49:16] <Lcvette> hurray!
[15:49:40] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+410/-0/±0] 13https://git.io/fhpRb
[15:49:42] <Not-e6c6> [02qtpyvcp] 07traviscibot 03ae4333d - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[15:53:45] <JT-Shop> 1 down 2 to go, truck is back running, backhoe is getting charged now to see if the tractor starts or not
[15:55:27] <Lcvette> nice!
[15:58:57] * TurBoss uploaded an image: image.png (143KB) < https://matrix.org >
[15:58:59] <TurBoss> yippie
[15:59:05] <TurBoss> working on master
[16:12:44] <JT-Shop> Yea the Ferguson F40 started up... it hasn't been started in quite some time
[16:13:02] <JT-Shop> 2 down 1 to go
[16:17:39] <hazzy-m> JT-Shop: wide front wheel spacing?
[16:17:59] <Not-e6c6> [02qtpyvcp] 07TurBoss created branch 03ATC - 13https://git.io/fhCou
[16:18:01] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 034 commits to 03ATC [+42/-0/±4] 13https://git.io/fhp0V
[16:18:02] <Not-e6c6> [02qtpyvcp] 07TurBoss 03fec743d - Add ATC files to current master
[16:18:04] <Not-e6c6> [02qtpyvcp] 07TurBoss 037df66b5 - designer plugin
[16:18:06] <Not-e6c6> [02qtpyvcp] 07TurBoss 03da87463 - able to run on lastest master
[16:18:07] <Not-e6c6> [02qtpyvcp] 07TurBoss 0387af9f8 - add mdi
[16:18:27] <TurBoss> I just C&P
[16:18:36] <TurBoss> merge was huge
[16:18:54] <hazzy-m> haha, I bet
[16:20:13] -!- travis-ci has joined #hazzy
[16:20:14] <travis-ci> kcjengr/qtpyvcp#762 (ATC - 87af9f8 : TurBoss): The build passed.
[16:20:14] <travis-ci> Diff view : https://github.com^...87af9f894b03
[16:20:14] <travis-ci> Build details : https://travis-ci.org
[16:20:14] -!- travis-ci has parted #hazzy
[16:20:47] <JT-Shop> yea the F40 is a `56 Ferguson 40hp wide front end, never seen a narrow one
[16:23:14] <JT-Shop> http://gnipsel.com
[16:23:36] <JT-Shop> it still has the wrong color paint lol massey red
[16:28:20] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03ATC [+0/-0/±1] 13https://git.io/fhp0D
[16:28:22] <Not-e6c6> [02qtpyvcp] 07TurBoss 03a5ebfe3 - unused stuff
[16:28:24] <JT-Shop> hmm the 15kw generator started and riding mower started but the hoe almost started... I hate pulling the battery on that one
[16:28:56] * Lcvette uploaded an image: qtpyvcp_icon.png (471KB) < https://matrix.org >
[16:29:15] <Lcvette> background removed, ready for use
[16:29:30] <Lcvette> will have to size in gimp
[16:29:44] <Lcvette> not sure what size you need it but its big and higher res for good clarity
[16:30:51] <hazzy-m> for some reasone wide front end tracotrs rare around here, don't know anything about them but a friend collects them
[16:31:00] <hazzy-m> Lcvette: Nice! thanks
[16:31:48] <Lcvette> do you know pixel size of icon?
[16:31:55] <Lcvette> i have it in gimp now
[16:31:58] <Lcvette> can scale and save
[16:32:17] <hazzy-m> 32 x 32 should be good for most things
[16:32:25] * TurBoss uploaded an image: Peek 06-03-2019 22-30.gif (595KB) < https://matrix.org >
[16:32:57] <hazzy-m> TurBoss: nice!!
[16:33:52] * Lcvette uploaded an image: qtpyvcp_icon_32x33.png (3KB) < https://matrix.org >
[16:34:14] <Lcvette> :(
[16:34:17] <Lcvette> now its hard to read
[16:42:44] <JT-Shop> hazzy-m: the engine on the F40 only has 50 hours
[16:43:05] <TurBoss> ferrari?
[16:43:23] <JT-Shop> http://gnipsel.com
[16:43:23] <hazzy-m> that is not even broken in!
[16:43:31] <JT-Shop> they one in the back right
[16:43:58] <JT-Shop> she needs a paint job
[16:44:58] <TurBoss> nice!
[16:45:24] * jt-m[m] uploaded an image: VectorImage_2019-03-06_034515.jpg (42KB) < https://matrix.org >
[16:45:38] <JT-Shop> that's the correct colors
[16:46:47] <hazzy-m> I think tractor supply sells valspar tractor pain in MS white(?) and red
[16:46:51] <hazzy-m> I think I have some lol
[16:50:52] <JT-Shop> yea our local farm supply has ms and jd paint the 56/57 F40 paint is a custom mix $$$
[16:58:44] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03ATC [+0/-0/±3] 13https://git.io/fhpE0
[16:58:45] <Not-e6c6> [02qtpyvcp] 07TurBoss 03efe94e6 - fix position
[17:05:45] <Lcvette> hurray!!
[17:11:00] <Lcvette> turboss, what do i open for dynatc?
[17:13:13] <TurBoss> Lcvette: run vcpchooser the navigate to examples/dynatc/config
[17:13:28] <Lcvette> ok, i tried it
[17:13:32] <Lcvette> it gave errors
[17:13:58] <Lcvette> maybe mainwindow.ui?
[17:14:37] <TurBoss> whcat errors?
[17:14:59] * Lcvette uploaded an image: image.png (142KB) < https://matrix.org >
[17:15:13] <Lcvette> this is the right one?
[17:15:18] <TurBoss> yes
[17:15:26] <TurBoss> is pretty broken but it works
[17:16:15] <TurBoss> I'm fixing some things
[17:23:04] <Lcvette> i changed the atc image to the resized one and its great now
[17:23:10] <Lcvette> perfect resolution
[17:23:22] <Lcvette> :D
[17:23:23] <TurBoss> cool
[17:23:37] * Lcvette uploaded an image: image.png (159KB) < https://matrix.org >
[17:23:57] <Lcvette> you want me to fix the text and circle sizes?
[17:24:45] <TurBoss> no
[17:24:45] * Lcvette uploaded an image: qtpyvcp_icon_2.png (622KB) < https://matrix.org >
[17:24:46] <TurBoss> sek
[17:24:49] <TurBoss> wow
[17:27:07] * Lcvette uploaded an image: qtpyvcp_icon_2_32px.png (3KB) < https://matrix.org >
[17:27:51] <TurBoss> looks funny
[17:28:13] <Lcvette> yeah?
[17:28:18] <TurBoss> no?
[17:28:22] <TurBoss> xD
[17:28:35] <TurBoss> the funny toons
[17:28:37] <TurBoss> :P
[17:28:37] <Lcvette> i can fix
[17:28:54] <TurBoss> cool!
[17:31:14] <Lcvette> while that is rerendering, i can't get to the things in the atc
[17:31:21] <Lcvette> its part of a qml?
[17:31:32] <Lcvette> i don't have anything for qml or know how to do qml
[17:31:42] <Lcvette> so I leave it for you
[17:31:44] <Lcvette> :)
[17:31:47] <TurBoss> is easy
[17:31:54] <TurBoss> do you have qtcreator?
[17:32:04] <Lcvette> no
[17:32:07] <Lcvette> you do
[17:32:10] <Lcvette> i do icons
[17:32:11] <Lcvette> :D
[17:32:12] <TurBoss> oki oki
[17:34:28] * TurBoss uploaded an image: image.png (207KB) < https://matrix.org >
[17:35:39] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03ATC [+0/-0/±1] 13https://git.io/fhpuL
[17:35:40] <Not-e6c6> [02qtpyvcp] 07TurBoss 03028e8f2 - fix tool positions and text size
[17:35:45] * Lcvette uploaded an image: qtpyvcp_icon_3.png (554KB) < https://matrix.org >
[17:36:16] <Lcvette> oki installed qtcreator
[17:36:19] <Lcvette> :D
[17:36:32] <TurBoss> :)
[17:38:32] <Lcvette> it doesn't see the qml
[17:40:19] <TurBoss> is in qtpyvcp/widgets/display_widgets/dyn_atc
[17:40:31] * Lcvette uploaded an image: qtpyvcp_icon_3_32px.png (3KB) < https://matrix.org >
[17:41:00] <TurBoss> nice!
[17:41:24] * Lcvette uploaded an image: image.png (88KB) < https://matrix.org >
[17:41:33] <Lcvette> no find it
[17:42:03] <TurBoss> that is an old one
[17:42:20] <TurBoss> old qtcreator
[17:42:25] <TurBoss> :(
[17:42:34] <Lcvette> sudo apt install qtcrator
[17:42:39] <TurBoss> nope
[17:43:01] <TurBoss> you may need to download from the website
[17:43:10] <TurBoss> doesn't matter
[17:43:38] <TurBoss> anyway
[17:43:39] <TurBoss> https://www.qt.io
[17:44:41] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03ATC [+0/-0/±1] 13https://git.io/fhpu3
[17:44:43] <Not-e6c6> [02qtpyvcp] 07TurBoss 0327acf64 - widget size
[17:49:58] <Lcvette> you can merge it
[17:50:59] <TurBoss> waht?
[17:51:08] <Lcvette> can you bring in the bebas kai text?
[17:51:27] <TurBoss> not sure
[17:51:37] <Lcvette> to qtcreator?
[17:52:52] <Lcvette> try my version
[17:53:01] <Lcvette> much better loking
[17:53:03] <Lcvette> :D
[17:53:06] <Lcvette> new graphic
[17:53:51] <TurBoss> okey
[17:54:32] <TurBoss> looks better Thanks!
[17:54:41] <Lcvette> hurray
[17:54:52] <Lcvette> now if we can get the bebas kai font in there it will be great!
[17:56:31] * Lcvette uploaded an image: image.png (83KB) < https://matrix.org >
[17:56:48] <Lcvette> my qt creator shows the bebas kai font installed
[17:58:59] <Lcvette> from the menu bar, tools>Options to get to that menu
[18:02:58] <TurBoss> got it
[18:04:07] * TurBoss uploaded an image: image.png (155KB) < https://matrix.org >
[18:04:27] <Lcvette> thats not bebas kai
[18:04:30] <TurBoss> no?
[18:04:31] <TurBoss> ok
[18:05:12] <Lcvette> do you have bebas kai on your computer?
[18:05:35] -!- JT-Shop has quit [Remote host closed the connection]
[18:05:52] <TurBoss> yes
[18:06:36] -!- JT-Shop has joined #hazzy
[18:07:59] <TurBoss> well that can wait
[18:08:59] * Lcvette uploaded an image: image.png (319KB) < https://matrix.org >
[18:09:07] <Lcvette> :O
[18:09:29] * TurBoss uploaded an image: image.png (8KB) < https://matrix.org >
[18:09:33] <TurBoss> :D
[18:09:39] <TurBoss> oh cool
[18:09:41] <TurBoss> !!!
[18:10:02] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 032 commits to 03ATC [+0/-0/±2] 13https://git.io/fhpuM
[18:10:04] <Not-e6c6> [02qtpyvcp] 07Lcvette 03bf4c369 - updated atc carousel image
[18:10:05] <Not-e6c6> [02qtpyvcp] 07TurBoss 038f30501 - minor
[18:10:26] <TurBoss> take latest
[18:10:39] <Lcvette> ok
[18:11:43] <TurBoss> pocket numbers are not shown
[18:11:46] <Lcvette> i took it
[18:11:52] <TurBoss> cool
[18:12:06] <TurBoss> If you read the code in the edit tab
[18:12:15] <TurBoss> it will make more sense
[18:12:54] <Lcvette> im reading now
[18:13:06] <Lcvette> makes less sense
[18:13:08] <Lcvette> lol
[18:13:09] <Lcvette> :D
[18:13:10] <TurBoss> hahaha
[18:32:35] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03ATC [+0/-0/±2] 13https://git.io/fhpub
[18:32:36] <Not-e6c6> [02qtpyvcp] 07TurBoss 0353b5bf0 - QtPy signals
[18:33:31] * TurBoss heads to another war
[18:33:38] <TurBoss> I'll be arround
[18:33:50] <Lcvette> lcvette will conquer bebas kai
[18:33:56] <TurBoss> hurray!
[18:34:15] <Lcvette> http://amin-ahmadi.com
[18:34:32] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03AckPyDM [+0/-0/±4] 13https://git.io/fhpuA
[18:34:34] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 035e17d3c - add licence headers to files modules adapted from PyDM (see #5)
[18:35:33] <Lcvette> https://stackoverflow.com
[18:36:20] <Lcvette> FontLoader { id: font; source: "/fonts/font.otf" }
[18:36:22] <Lcvette> ?
[18:37:08] <hazzy-m> try it
[18:38:40] <Lcvette> i don't kinow where
[18:38:42] <Lcvette> :(
[18:39:45] <hazzy-m> neither do I lol
[18:39:54] <hazzy-m> we are lost without TurBoss
[18:41:05] * Lcvette uploaded an image: image.png (65KB) < https://matrix.org >
[18:41:15] <Lcvette> ?
[18:41:35] <Lcvette> hazzy
[18:43:01] <Lcvette> BebasKai.ttf?raw=true
[18:43:10] <Lcvette> ?
[18:44:02] * Lcvette sent a long message: < https://matrix.org >
[18:44:11] <hazzy-m> BebasKai.ttf
[18:44:24] <hazzy-m> don't think you need the raw
[18:44:37] <hazzy-m> not sure were to put it though
[18:46:02] * Lcvette sent a long message: < https://matrix.org >
[19:25:57] <hazzy-m> did it work?
[19:26:39] <Lcvette> ive been dicking with it the whole time
[19:26:45] <Lcvette> i just don't know the syntax
[19:27:35] * Lcvette sent a long message: < https://matrix.org >
[19:27:54] <Lcvette> it doesn't like the word font
[19:28:00] <Lcvette> keeps making an error for it
[19:28:14] <Lcvette> if i erase that line it accepts the code but doesn't do anything
[19:29:29] <hazzy-m> are there any font size setting in there already?
[19:30:33] * Lcvette sent a long message: < https://matrix.org >
[19:31:02] <hazzy-m> dsf
[19:31:03] <hazzy-m> sadf
[19:31:03] <hazzy-m> sdf
[19:31:06] <hazzy-m> opps
[19:31:25] <hazzy-m> sd
[19:31:37] <hazzy-m> I'm trying to send a code snipet and it won't let me
[19:31:38] <hazzy-m> arrggg
[19:31:42] * hazzy-m sent a long message: < https://matrix.org >
[19:31:44] <hazzy-m> there
[19:32:45] <hazzy-m> change arial to bebas
[19:36:37] <TurBoss> I'll be back soon
[19:36:38] <TurBoss> :)
[19:36:41] <TurBoss> i hope
[19:36:50] <Lcvette> hurray
[19:36:51] <Lcvette> !!
[19:48:50] <hazzy-m> Lcvette: I need help
[19:48:55] * hazzy-m sent a long message: < https://matrix.org >
[19:50:03] <hazzy-m> # Acknowledgements
[19:50:04] <hazzy-m> The QtPyVCP team would like to acknowledge several projects which have been particularly valuable as sources of inspiration, examples, code snippets, and in a few cases entire modules. In particular we would like to thank the developers and maintainers who have gone out of their way to help us steal their code and take advantage of the countless hours of blood, toil, tearsand sweat that went into it.
[19:50:16] <hazzy-m> folowed by a list
[19:50:35] * hazzy-m is not any good at this kind of thing
[19:54:40] <Lcvette> ok, give me a few minutes to finish what im working on
[19:54:50] <Lcvette> lcvette codes slow
[19:54:57] <hazzy-m> sure, no rush
[19:55:55] <Lcvette> i find it best not to over do it though
[19:56:08] <Lcvette> or else you risk alienating as many as you thanked
[19:56:09] <hazzy-m> agreed
[19:56:26] <hazzy-m> lol ture
[19:56:47] <hazzy-m> maybe just links then =?
[19:58:22] <TurBoss> what?
[19:58:49] <Lcvette> i would do a general acknowledgement of the previous work maybe a little less over the top as your draft
[19:58:51] <Lcvette> lol
[19:59:12] <TurBoss> ah lol
[19:59:16] <TurBoss> I missunderstood
[20:00:43] <hazzy-m> The QtPyVCP team would like to acknowledge several projects which have been particularly valuable as sources of inspiration and examples.
[20:01:12] * Lcvette uploaded an image: image.png (155KB) < https://matrix.org >
[20:01:19] <TurBoss> wow
[20:01:22] <Lcvette> lcvette fixed it
[20:01:26] <TurBoss> hurray!
[20:01:28] <hazzy-m> hurray!
[20:01:28] <TurBoss> how?
[20:01:30] <TurBoss> ahhaha
[20:01:45] <hazzy-m> Lcvette's fu is strong!
[20:01:47] <Lcvette> with my magic coding
[20:01:56] <TurBoss> fu!
[20:02:06] <Lcvette> sudo apt install hazzy aid
[20:02:19] <Lcvette> :D
[20:02:34] * hazzy-m uploaded an image: image.png (1459KB) < https://matrix.org >
[20:02:44] <TurBoss> 🐼
[20:03:08] <Lcvette> hahahaha
[20:04:26] <Lcvette> turboss i pushed, you better test and make sure i didn't break anything
[20:04:33] <TurBoss> cool
[20:04:41] <TurBoss> some nin
[20:04:42] <TurBoss> min
[20:05:08] <Lcvette> no..you do it now!
[20:05:11] <Lcvette> lol
[20:05:14] <TurBoss> kk
[20:06:48] <TurBoss> why did you removed radius: width / 2 ?
[20:07:09] <TurBoss> didn't look fine?
[20:07:19] <Lcvette> ?
[20:07:32] <Lcvette> radius is bigger
[20:07:46] <Lcvette> rectangles are now bigger
[20:07:50] <TurBoss> - radius: width / 2
[20:07:51] <TurBoss> + radius: 33
[20:08:12] <Lcvette> 66x66oh
[20:08:19] <Lcvette> i didn't know thats what it was
[20:08:24] <Lcvette> you could put it bacl
[20:08:32] <TurBoss> yes
[20:08:34] <Lcvette> i did it manually
[20:08:38] <TurBoss> but not now
[20:08:46] <TurBoss> can you please?
[20:09:02] <TurBoss> it picks the width and divides by 2
[20:11:27] <Lcvette> how do i put it back?
[20:12:07] <hazzy-m> just replace 33 with width / 2
[20:12:24] <Lcvette> doesn't let me type anything in the box except numbers
[20:12:37] <hazzy-m> i'll do it
[20:12:37] <hazzy-m> it fine
[20:12:49] <TurBoss> Migrating rooms from roomstore, this may take a while...
[20:12:58] <TurBoss> can't reboot to LCNV
[20:13:06] <hazzy-m> TurBoss: Don't wory!
[20:13:10] <TurBoss> ty
[20:13:54] <Lcvette> ok i see, do it in the code
[20:14:03] <Lcvette> i was doing it in the designer
[20:14:21] <TurBoss> if you do in code some gears will apear on designer box
[20:14:24] <TurBoss> input
[20:14:37] <TurBoss> so you now is a calculated value
[20:14:45] <TurBoss> like the atc placement
[20:14:56] <TurBoss> is centered to the widget
[20:16:24] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 032 commits to 03ATC [+0/-0/±2] 13https://git.io/fhpzx
[20:16:25] <Not-e6c6> [02qtpyvcp] 07Lcvette 03512844e - fixed dyn_atc font and tool circle sizes
[20:16:27] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 03537b826 - make radius calculated from width again
[20:16:29] <Lcvette> i also can put width next to height so they stay locked
[20:16:30] <hazzy-m> #MRCWA
[20:16:56] <Lcvette> you did it already?
[20:17:07] <hazzy-m> I think so
[20:17:51] * Lcvette sent a long message: < https://matrix.org >
[20:18:09] <hazzy-m> how do I run the ATC sim?
[20:18:16] <Lcvette> chooser
[20:18:22] <Lcvette> choose file
[20:19:35] <hazzy-m> got it
[20:19:36] <hazzy-m> ty
[20:20:16] <Lcvette> widgets/displaywidgets/atcwidget/
[20:20:16] <Lcvette> ok
[20:21:47] <Lcvette> looks better?
[20:23:54] <Lcvette> Works good!!
[20:24:01] <Lcvette> Very smooth turboss!
[20:24:12] <Lcvette> Hurray!
[20:26:14] <hazzy-m> yes, its fantastic!
[20:26:16] <Lcvette> Did you see my fu
[20:26:25] <Lcvette> For width and height?
[20:26:55] <Lcvette> So it only takes one change to change the whole circle size
[20:28:19] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03ATC [+0/-0/±1] 13https://git.io/fhpgT
[20:28:20] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 030fa1ec2 - ignore .qmlc files
[20:29:05] <Lcvette> Ignore lc files?
[20:29:08] <Lcvette> :(
[20:29:14] <hazzy-m> yep
[20:29:17] <hazzy-m> lol
[20:29:22] <hazzy-m> I didn't see you changes
[20:29:28] <Lcvette> Sad panda
[20:29:41] <Lcvette> Did you add it too?
[20:29:44] <hazzy-m> was that before I made the radius great again?
[20:30:16] <Lcvette> I didn't save
[20:30:25] <Lcvette> I wanted to know if it is ok?
[20:31:52] <Lcvette> Lcvette was on the first one and hazzy posted the whole changed file
[20:31:56] <Lcvette> Ll
[20:31:59] <Lcvette> Lol
[20:33:37] * hazzy-m is confused
[20:33:40] <hazzy-m> lol
[20:33:44] <TurBoss> why?
[20:33:46] <hazzy-m> do you mean this radius: width/2
[20:34:05] <Lcvette> No
[20:34:16] <Lcvette> Height: width
[20:34:59] <Lcvette> Width: 66
[20:34:59] <Lcvette> Height: width
[20:35:00] <Lcvette> Radius: width/2
[20:35:06] <TurBoss> cool!
[20:35:11] <Lcvette> Only need to enter one number
[20:35:25] <Lcvette> I fu'd
[20:35:25] <TurBoss> strong fu
[20:36:05] <Lcvette> And it made alittle lock symbol in the qtcreator designer
[20:36:18] <Lcvette> 🐼
[20:36:24] <Lcvette> Waaaa
[20:38:51] <hazzy-m> nice!
[20:39:08] * TurBoss is back
[20:44:40] <TurBoss> qt creator allows to zoom
[20:44:41] <TurBoss> :D
[20:44:45] <TurBoss> nice feature
[20:45:02] <Lcvette> so is it ok to use the height: width code?
[20:45:17] <TurBoss> yes
[20:45:27] <TurBoss> also works with ui files
[20:45:37] <TurBoss> but plugins doesn't work here
[20:45:52] <TurBoss> any idea why?
[20:49:55] <Lcvette> ok, pushed
[20:50:02] <Lcvette> it doesn't work?
[20:51:17] <Lcvette> what plugin?
[20:54:08] <TurBoss> qtpyvcpplugins
[20:54:44] <Lcvette> code doesn't work?
[20:56:40] <TurBoss> no
[20:57:02] <TurBoss> I mean that qtcreator can open UI files but qtpyvcp plugins doesn't show there
[20:57:55] <Lcvette> i dunno
[20:58:08] <Lcvette> i dunno what a plugin is
[21:01:02] <TurBoss> widgets the thing you drag and drop into the UI
[21:02:52] <Lcvette> lcvette is confused
[21:03:21] <Lcvette> i know widgets but are you saying the atc widget doesn't work now in the ui?
[21:04:25] <TurBoss> no...
[21:04:32] <TurBoss> doesn't matter
[21:04:34] <TurBoss> XD
[21:08:50] <Lcvette> my vokoscreen stopped working
[21:08:58] <Lcvette> how do i uninstall?
[21:09:34] <Lcvette> sudo apt uninstall vokoscreen
[21:09:35] <Lcvette> ?
[21:11:09] <hazzy-m> sudo apt remove vokoscreen
[21:14:42] <Lcvette> know another good screen recorder?
[21:15:45] <Lcvette> linux debian stretch screen recorder
[21:17:06] <TurBoss> obs studio
[21:17:19] <Lcvette> is simple?
[21:17:34] <TurBoss> hmmmm
[21:17:35] <TurBoss> yes
[21:18:00] <TurBoss> https://obsproject.com
[21:18:04] <hazzy-m> simple screen recorder is great
[21:18:25] <Lcvette> simple screen recorder
[21:18:31] <Lcvette> sounds simple
[21:18:36] <Lcvette> studio soun ds pro
[21:18:38] <Lcvette> lol
[21:18:39] <hazzy-m> sudo apt install simplescreenrecorder
[21:18:42] <Lcvette> how do i get soimple
[21:25:48] <Lcvette> hurray
[21:25:58] <Lcvette> the save method is a bit wierd\
[21:26:03] <Lcvette> saving the file in advance
[21:26:29] <Lcvette> bt i guess thats ok, just different
[21:28:16] <hazzy-m> yeah, the interface is a little funky, but it works well
[21:28:27] <Lcvette> https://youtu.be
[21:32:57] <Lcvette> hurray!!
[21:41:57] <hazzy-m> looks good
[21:43:02] <Lcvette> yeah im super pumped!
[21:43:13] <Lcvette> it now is looking like a million bucks!
[21:43:29] <Lcvette> turboss hit the nail on the head with the graphics resizing
[21:43:37] <Lcvette> and you solved the font code!
[21:43:41] <Lcvette> hurray!
[21:43:45] <Lcvette> now what?
[21:43:50] <Lcvette> :O
[21:43:57] <TurBoss> some code left
[21:44:07] <hazzy-m> haha, you fu'd the font
[21:44:10] <Lcvette> need the pocket labels
[21:44:20] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03AckPyDM [+1/-0/±1] 13https://git.io/fhp2f
[21:44:21] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 038f18caa - add acknowledgments section to docs
[21:44:40] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03AckPyDM [+1/-0/±1] 13https://git.io/fhp2J
[21:44:41] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 038559a9e - add acknowledgments section to docs (see #5)
[21:46:43] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 034 commits to 03master [+10/-2/±10] 13https://git.io/fhp2k
[21:46:45] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 03c120afc - Merge branch 'AckPyDM' (fixes #5)
[21:46:47] <Not-e6c6> [02qtpyvcp] 07KurtJacobson closed issue 03#5: Acknowledgements to PyDM - 13https://git.io/fhbNP
[21:47:34] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03AckPyDM
[21:47:36] <Not-e6c6> [02qtpyvcp] 07KurtJacobson deleted branch 03AckPyDM - 13https://git.io/fhCou
[21:49:01] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+413/-0/±0] 13https://git.io/fhp2q
[21:49:02] <Not-e6c6> [02qtpyvcp] 07traviscibot 03a4aaac9 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[21:55:20] <TurBoss> cool
[22:03:28] * Lcvette sent a long message: < https://matrix.org >
[22:03:37] <Lcvette> turboss, would this be correct?
[22:03:57] <Lcvette> im adding the pocket numbers for the carousel
[22:04:15] <TurBoss> looks ok
[22:05:58] <Lcvette> i just found a few typos
[22:06:03] <Lcvette> i fixed
[22:06:33] * Lcvette sent a long message: < https://matrix.org >
[22:08:40] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03ATC [+0/-0/±1] 13https://git.io/fhp2V
[22:08:41] <Not-e6c6> [02qtpyvcp] 07Lcvette 0319ad4bd - height: width code change
[22:19:20] <Lcvette> turboss, halp!!!
[22:19:23] <Lcvette> it no work
[22:19:26] <TurBoss> yo
[22:19:28] <TurBoss> tell me
[22:20:01] <Lcvette> the numbers don't stay upright
[22:20:14] <TurBoss> ok
[22:20:40] <Lcvette> i just pushed the code
[22:20:41] <TurBoss> you may need to rotate them
[22:20:43] <TurBoss> ok
[22:20:50] <Lcvette> it looks nice
[22:21:01] <Lcvette> all the colors changed the right color in the code
[22:22:53] <Lcvette> does it need a box?
[22:23:03] <Lcvette> or can the text itself rotate?
[22:23:56] <TurBoss> I'm looking
[22:28:05] <TurBoss> ok
[22:28:07] <TurBoss> add
[22:28:17] <TurBoss> ```
[22:28:18] <TurBoss> po```
[22:28:24] * TurBoss sent a long message: < https://matrix.org >
[22:28:50] <TurBoss> inside rotateFwdSig and rorateRevSig
[22:29:08] <TurBoss> I would countinue using text 1 for label 1
[22:29:14] <TurBoss> like tools
[22:29:54] <TurBoss> but yeah looks nice!
[22:29:57] <TurBoss> thanks!
[22:29:59] <Lcvette> pockets will be static but tools will change
[22:30:19] <TurBoss> but could be confusing while reading code
[22:30:27] <TurBoss> doesn't matter
[22:36:04] * Lcvette sent a long message: < https://matrix.org >
[22:36:31] <TurBoss> cool
[22:36:38] <TurBoss> you can continue until 12
[22:36:41] <TurBoss> :P
[22:36:58] <Lcvette> just saw that
[22:36:58] <Lcvette> lol
[22:39:47] * Lcvette uploaded an image: image.png (161KB) < https://matrix.org >
[22:39:57] <Lcvette> lcvette fu's it with turboss's help
[22:40:07] <Lcvette> works!
[22:40:46] <TurBoss> you changed start pos?
[22:40:55] <TurBoss> just asking
[22:41:11] <Lcvette> no
[22:41:17] <Lcvette> i was rotating to test
[22:41:23] <Lcvette> just where i captured the screen shot
[22:41:28] <TurBoss> ok! cool!
[22:41:39] <TurBoss> isn't that hard right?
[22:42:33] <Lcvette> not when there is something to copy
[22:42:43] <Lcvette> but if its a blank page, no idea what to do
[22:43:05] <Lcvette> pushed
[22:43:55] <TurBoss> https://stallman.org
[22:44:06] <TurBoss> > you need to read the source code of real programs (or parts of them) and figure out what they do. Then start writing changes in them, to add features, or fix bugs if you can find out about specific bugs to fix. Ask some good programmers who are familiar with the code of those programs to read and critique your changes.
[22:44:28] <TurBoss> Richard stallman
[22:44:33] <TurBoss> ;)
[22:44:50] <TurBoss> fu is strong in you
[22:45:03] <Lcvette> yeah if i do this enough im sure i will pick more and more up
[22:47:44] <TurBoss> did you notice that you can move the carrousel by issuing T2M6 etc..
[22:49:11] <Lcvette> no
[22:49:17] <Lcvette> i just was pushing buttons
[22:49:25] <TurBoss> isn't much well
[22:49:29] <Lcvette> so we can put it into probe basic?
[22:49:31] <TurBoss> but its something
[22:49:43] <Lcvette> make connections with signals and slots?
[22:49:59] <TurBoss> I would like to read LCNC status channel
[22:50:10] <TurBoss> no signals would be required
[22:50:16] <Lcvette> what do we need for that?
[22:50:31] <TurBoss> kill some neurones
[22:51:50] <Lcvette> lol
[22:52:08] <Lcvette> can't do it with the new thing hazzy did?
[22:52:16] <TurBoss> yes thats
[22:52:24] <TurBoss> I need to read the docs JT did
[22:52:54] <Lcvette> you mean you need the rules?
[22:53:14] <TurBoss> not rules
[22:53:28] <Lcvette> the key
[22:54:18] <Lcvette> https://qtpyvcp.kcjengr.com
[22:54:40] <TurBoss> ty
[22:55:20] <Lcvette> he made it very nice and clean and easy to read and get info from
[22:57:02] <TurBoss> so... when the tool is changed it should exit from the carrousel?
[22:57:13] <Lcvette> yes
[22:57:17] <TurBoss> hmmmm
[22:57:24] <Lcvette> should mimic the actual tool changer
[22:57:38] <Lcvette> thats what its benefit is
[22:57:39] <TurBoss> wich one?
[22:57:52] <Lcvette> to know whats in the changer and what pockets are empty
[22:58:15] <Lcvette> which one what?
[22:58:37] <TurBoss> toolchanger
[22:58:38] <Lcvette> which number?
[22:58:46] <TurBoss> a real one?
[22:58:50] <Lcvette> the numbers i just added are the pocket numbers of the ATC
[22:58:59] <Lcvette> they don't change
[22:59:08] <TurBoss> yes yes
[22:59:18] <TurBoss> the ones inside the circle
[22:59:31] <Lcvette> the ones inside the circle are the tools
[22:59:35] <TurBoss> circle should move to right once
[22:59:45] <Lcvette> they will change, be empty etc
[22:59:46] <TurBoss> when tool reached
[23:00:04] <TurBoss> and where is that info in the tool table?
[23:00:25] <TurBoss> so I should read TT and draw circles acording
[23:00:35] <Lcvette> ?
[23:00:44] <Lcvette> no
[23:00:47] <Lcvette> tt is wrong
[23:01:02] <TurBoss> hows that
[23:01:13] <Lcvette> well, at least it is currently
[23:01:26] <Lcvette> hoping its correct when the atc is functional
[23:01:48] <Lcvette> i don't know how the pocket numbers are written in the tool table
[23:02:11] <Lcvette> the atc pockets are hard coded to the var table
[23:02:34] <Lcvette> they are defined in varfile
[23:02:41] <TurBoss> ok
[23:02:52] <Lcvette> 12 var numbers
[23:03:29] <Lcvette> when a tool is loaded into the atc it is held in memory and when shut down it is saved to those var file numbers
[23:03:33] <TurBoss> ok for now I'll read the ToolTable
[23:04:49] <Lcvette> i don't know if when it is working if the tt records the pocket number the tool has been stored in of the carousel
[23:04:57] <Lcvette> may be a good question for JT
[23:05:04] <TurBoss> take note :D
[23:05:10] <TurBoss> ask JT
[23:05:50] <Lcvette> some how i don't think it will be
[23:06:05] <Lcvette> i don't think it happens in gmoccapy
[23:06:34] <Lcvette> the pocket numbers don't correspond to the carousel pocket the tool has been stored in
[23:06:39] <Lcvette> doesn't record it
[23:06:46] <TurBoss> ahhhhh
[23:06:46] <Lcvette> it should i think
[23:08:07] <Lcvette> uh oh
[23:08:18] <Lcvette> i just tried the m6 t#
[23:08:39] <Lcvette> the pocket numbers rotate the wrong direction
[23:08:50] <TurBoss> :)
[23:08:50] <Lcvette> m6 t1
[23:08:58] <TurBoss> i know
[23:09:04] <TurBoss> isn't T1 M6?
[23:09:42] <TurBoss> this will be more dificult
[23:09:56] <TurBoss> should take the direction the real carrousel does
[23:10:42] <Lcvette> should work either t1 m6 or m6 t1
[23:10:47] <TurBoss> ok
[23:11:11] <Lcvette> that function is broken
[23:11:17] <TurBoss> yes!
[23:11:22] <Lcvette> doesn't go to right tool number eithr
[23:11:28] <Lcvette> i may have broke it?
[23:11:31] <TurBoss> is broken
[23:11:45] <TurBoss> just moves
[23:11:46] <Lcvette> Lcvette broke
[23:11:46] <Lcvette> :(
[23:11:50] <TurBoss> ahhahaah
[23:11:52] <TurBoss> no...
[23:13:04] <Lcvette> you will have to use some of the m6 remap code
[23:13:20] <Lcvette> it has the formula for determining the direction the carousel will rotate
[23:13:51] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 034 commits to 03ATC [+0/-0/±4] 13https://git.io/fhpaC
[23:13:53] <Not-e6c6> [02qtpyvcp] 07Lcvette 03482c585 - add pocket numbers to dyn-atc
[23:13:54] <Not-e6c6> [02qtpyvcp] 07Lcvette 03d0ae7f1 - made pocket numbers rotate
[23:13:56] <Not-e6c6> [02qtpyvcp] 07Lcvette 030fde501 - fixed pocket number alignment
[23:13:57] <Not-e6c6> [02qtpyvcp] 07TurBoss 03a958669 - use IN_DESIGNER
[23:19:42] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 031 commit to 03ATC [+0/-0/±1] 13https://git.io/fhpaB
[23:19:43] <Not-e6c6> [02qtpyvcp] 07TurBoss 034e8c611 - use correct args
[23:20:00] <TurBoss> fixed part of tool change
[23:21:21] <Lcvette> looking now
[23:23:11] <Lcvette> the numbers stay up now
[23:23:17] <TurBoss> yeah
[23:23:20] <Lcvette> nice!
[23:23:24] <Lcvette> litle wins!
[23:23:30] <Lcvette> hurray!
[23:43:56] * TurBoss posted a file: atc.mkv (10245KB) < https://matrix.org >
[23:47:49] <TurBoss> hazzy: is there a way to get the pocket a tool is currently?
[23:57:18] * TurBoss sent a long message: < https://matrix.org >
[23:59:11] <TurBoss> ok should be fine