#hazzy | Logs for 2019-03-22

Back
[00:11:02] * Lcvette uploaded an image: image.png (83KB) < https://matrix.org >
[00:12:32] <Lcvette> JT: not sure how you wanted the formatting for the display lines above the number boxes, but i think this is what you were after. you can see what was done, I pushed it!
[00:36:18] <hazzy-m> hurray!!!!
[00:36:30] <hazzy-m> .xsessionrc no longer needed
[01:20:08] <Lcvette> Hurray!!
[05:45:19] <TurBoss> morning
[06:24:02] <JT[m]1> morning
[06:32:04] <jthornton> morning
[07:09:46] <TurBoss> hey
[07:11:46] <JT[m]1> Lcvette: did a lot of copy and pasting in mill_touch lol all the button names were wrong after that lol
[07:15:02] * JT[m]1 uploaded an image: Screenshot at 2019-03-22 06-13-55.png (66KB) < https://matrix.org >
[07:15:15] * JT[m]1 uploaded an image: Screenshot at 2019-03-22 06-14-12.png (68KB) < https://matrix.org >
[07:16:08] <JT[m]1> buttons still look the same...
[07:19:16] <TurBoss> cool!
[07:29:21] <JT[m]1> still need to do some work on the qss file... but getting going
[07:29:33] <JT[m]1> did you see the mdi help tab?
[07:29:35] <TurBoss> qss in cool
[07:29:53] <TurBoss> no
[07:30:04] <TurBoss> I'm trying to fix a ,/. error
[07:30:06] <TurBoss> i have
[07:30:48] * JT[m]1 uploaded an image: Screenshot at 2019-03-22 06-30-24.png (76KB) < https://matrix.org >
[07:30:59] <JT[m]1> a path error?
[07:31:23] <TurBoss> unit system
[07:36:56] <TurBoss> seems locale
[07:50:32] <TurBoss> JT: I tryed to run Jcnc on the real machine but I found that ticks are begin shown for machine and program
[07:51:37] <TurBoss> uh oh
[07:52:39] <TurBoss> pip install -e .
[07:54:31] <TurBoss> nop still the same
[08:02:19] <JT[m]1> even though you turned them off in the ini?
[08:04:51] * JT[m]1 uploaded an image: Screenshot at 2019-03-22 07-04-20.png (42KB) < https://matrix.org >
[08:05:06] <JT[m]1> I kinda like that one a little
[08:14:34] -!- roguish[m] has quit [*.net *.split]
[08:14:35] -!- GitterIntegratio has quit [*.net *.split]
[08:22:07] <TurBoss> oh no
[08:22:12] -!- roguish[m] has joined #hazzy
[08:22:59] -!- GitterIntegratio has joined #hazzy
[08:23:19] <TurBoss> thanks!
[08:25:14] <TurBoss> ```
[08:25:15] <TurBoss> [VTK]
[08:25:15] <TurBoss> ...(truncated)
[09:12:13] * JT[m]1 uploaded an image: Screenshot at 2019-03-22 08-11-44.png (56KB) < https://matrix.org >
[09:12:37] <JT[m]1> Lcvette: broke all my buttons lol
[09:34:50] <TurBoss> lol
[09:38:18] <JT[m]1> Lcvette: before pulling mill_touch copy the configuration to your linuxcnc/configs directory and try and run mill_touch
[09:53:23] <JT[m]1> and also set your theme to dark2.qss, that's the one I was using yesterday
[10:18:34] <Lcvette> morning
[10:19:06] <Lcvette> I borke the buttons?
[10:19:08] <Lcvette> :D
[10:19:10] <Lcvette> :O
[10:19:33] <JT[m]1> yea cut and paste changes the names of the buttons, try and run mill touch
[10:19:47] <JT[m]1> and use dark2.qss
[10:21:02] <JT[m]1> cut and paste also breaks any relation to a button group
[10:21:35] <Lcvette> hmmm, didn't experience that in PB before
[10:21:46] <Lcvette> but then may not have had much setup
[10:22:57] <JT[m]1> yea drag and drop is the only way to preserve names and relations with widgets
[10:23:33] <JT[m]1> if the widget has a generic name it usually won't matter but if it has a meaninful name it probley matters
[10:23:36] <Lcvette> there wasn't enough room to work
[10:24:04] <JT[m]1> what I do is to add a tab to the other side then drag back
[10:24:12] <Lcvette> i actually had to add a tab and take it over there to
[10:24:14] <Lcvette> lol
[10:24:22] <Lcvette> ah
[10:24:41] <JT[m]1> drag the whole frame or whatever to another tab on the other side then drag back bit by bit
[10:24:58] <JT[m]1> lol I could tell how many times you cut and pasted by the names
[10:26:42] <JT[m]1> morphing also renames a widget
[10:27:34] <Lcvette> im in the ini and it looks like its set for dark but the light one keep opening
[10:27:54] * Lcvette uploaded an image: image.png (23KB) < https://matrix.org >
[10:30:22] <JT[m]1> did you pull?
[10:30:29] <Lcvette> yeah
[10:32:02] <Lcvette> wait it changed again
[10:32:02] <JT[m]1> there is no dark.qss anymore it's now dark1.qss, dark2.qss, dark3.qss, light1.qss, light2.qss
[10:32:25] <JT[m]1> yea pull and try dark1 and dark2
[10:33:33] * JT[m]1 goes to see how it looks on the crappy touch screen on the BP
[10:37:32] <Lcvette> pulled newest, changed qss names in ini, still not working
[10:40:55] <Lcvette> ```/home/chris/.local/lib/python2.7/site-packages/mill_touch/ui/style.qss```
[10:41:52] * Lcvette uploaded an image: image.png (23KB) < https://matrix.org >
[10:41:58] <Lcvette> ?
[10:42:01] <Lcvette> im confused
[10:42:02] <JT-Shop> where is that line?
[10:43:06] * Lcvette uploaded an image: image.png (126KB) < https://matrix.org >
[10:44:16] <Lcvette> i just saw the dar1.qss typo and fixed it but still same thing,
[10:44:42] <Lcvette> thats the terminal window
[10:44:44] <Lcvette> from launching the gui
[10:45:23] <Lcvette> ah wait
[10:45:33] <Lcvette> its loading the ini for qtpyvcp
[10:45:48] <Lcvette> how do i change that?
[10:46:38] * TurBoss uploaded an image: image.png (194KB) < https://matrix.org >
[10:46:53] <TurBoss> :O
[10:47:04] * Lcvette sent a long message: < https://matrix.org >
[10:47:35] <TurBoss> there is something with vtk and milimeters
[10:51:11] <Lcvette> its broken?
[10:52:01] <hazzy-m> VTK only worls with inches xD
[10:52:13] <hazzy-m> ok, that should be an easy fix though
[10:52:35] <hazzy-m> wait, but it works with metric programs ..
[10:52:37] <hazzy-m> hmmm
[10:55:25] <Lcvette> hazzy, is there a way to change where the vcp launcher gets the configuration directory path?
[10:55:49] <Lcvette> for me it keeps using the qtpyvcp sims to run milltouch
[10:57:00] <JT[m]1> Lcvette: it's not dar1.qss, it's dark1.qss
[10:57:10] <Lcvette> already fixed that
[10:57:25] <JT[m]1> ok
[10:57:48] <Lcvette> the vcp launcher keep loading the xyz.ini
[10:58:22] <Lcvette> see latest clip paste above
[10:58:54] <Lcvette> not sure how to fix
[10:59:43] <JT[m]1> try typing linuxcnc from a terminal and pick a configuration from that
[11:00:05] <JT[m]1> hazzy: how can I include my .qss files with a pip install?
[11:00:49] <Lcvette> milltouch isn't in there
[11:02:35] <JT[m]1> did you do a git checkout and then do a pip install?
[11:03:04] <JT[m]1> from mill_touch directory it's pip install -e .
[11:04:18] <Lcvette> just tried that same thing
[11:05:31] <JT[m]1> and?
[11:06:21] * Lcvette sent a long message: < https://matrix.org >
[11:07:55] <JT[m]1> are you picking a sim in qtpyvcp.sim?
[11:08:08] <JT[m]1> does pip list show mill-touch?
[11:08:34] <Lcvette> im not picking anything
[11:08:56] <Lcvette> im just launching from the vcp launcher and selecting mill touch
[11:09:36] * Lcvette uploaded an image: image.png (23KB) < https://matrix.org >
[11:11:14] <JT[m]1> how do you start the vcp chooser?
[11:11:28] <Lcvette> there is an icon on the desktop
[11:12:10] <JT[m]1> what are the command properties of that icon?
[11:12:59] <Lcvette> fce4-terminal -e "linuxcnc /home/chris/dev/qtpyvcp/sim/xyz.ini" --hold
[11:13:18] <Lcvette> ah
[11:13:37] <JT[m]1> yea that will only launch the xyz sim
[11:14:03] <JT[m]1> copy the mill_touch configuration directory to linuxcnc/configs
[11:14:16] <JT[m]1> then start linuxcnc and pick mill_touch
[11:14:59] <Lcvette> the whole config folder
[11:15:04] <Lcvette> or the files in it
[11:16:08] <Lcvette> hurray!
[11:16:13] <Lcvette> i figured it out
[11:17:44] <JT[m]1> YIPPIE!
[11:18:09] <Lcvette> ok you said it was still broken?
[11:18:22] <Lcvette> but mine is not borken
[11:18:28] <Lcvette> the button alignment
[11:20:39] <Lcvette> i see some other broken stuff though
[11:22:58] <JT[m]1> which qss are you using?
[11:23:58] <JT[m]1> try dark2.qss vs dark1.qss
[11:24:12] <Lcvette> i dunno they all look the same
[11:24:51] * Lcvette uploaded an image: Screenshot_2019-03-22_11-24-33.png (47KB) < https://matrix.org >
[11:27:30] <Lcvette> JT: they don't change
[11:27:55] <Lcvette> tried them all they all look the same
[11:28:52] <JT[m]1> look on the mdi tab
[11:29:33] <Lcvette> ok
[11:30:44] * Lcvette uploaded an image: dark1.png (58KB) < https://matrix.org >
[11:30:49] <Lcvette> dark1
[11:31:06] <JT[m]1> yea that is dark1.qss
[11:31:48] <JT[m]1> click on G 2 then Load Parameters
[11:31:53] * Lcvette uploaded an image: dark2.png (58KB) < https://matrix.org >
[11:32:23] <Lcvette> looks the same to me
[11:33:16] <JT[m]1> that is still dark1
[11:33:21] <Lcvette> thats because it is the same
[11:33:29] <Lcvette> im changing the ini to dark2
[11:33:37] <Lcvette> and saving but its not coming through
[11:34:43] <JT[m]1> where are you changing it?
[11:34:45] <Lcvette> nm.. figured it out
[11:34:56] <Lcvette> was changing the opriginal location file
[11:35:01] <Lcvette> this is WAY too conmfusing
[11:35:32] <Lcvette> we need to make this a bit more user friendly
[11:36:06] * JT[m]1 uploaded an image: Screenshot at 2019-03-22 10-35-32.png (66KB) < https://matrix.org >
[11:36:35] <Lcvette> yuyp
[11:36:40] <Lcvette> im there now
[11:36:41] <Lcvette> :D
[11:36:46] <JT[m]1> hopefully the installed version is less cornfusing
[11:36:53] <Lcvette> lol
[11:36:54] <Lcvette> indeed
[11:37:49] <Lcvette> so now if i make changes or pull do i need to go through and manually update the files in the linuxcnc config?
[11:37:52] <Lcvette> or?
[11:39:04] <Lcvette> suggestion... your MDI entry box...
[11:39:18] <Lcvette> on dark2, i don't see it
[11:39:33] <Lcvette> unless i knew where it was because i designed it, how would i know where to type anything?
[11:40:41] <JT[m]1> it's a touch screen lol you can't type in it and I gave up on dark2 because I don't like it
[11:41:00] <Lcvette> ok
[11:41:07] <JT[m]1> dark1 is the one I'm working on now but I need to change some stuff up
[11:42:00] <JT[m]1> I just wanted you to see that the changes you made didn't fix dark2 with was just dark yesterday
[11:42:16] <JT[m]1> switch back to dark1 and enter something in the mdi using the buttons
[11:44:57] <hazzy-m> JT: the qss files should be included with the pip install, checking
[11:45:06] <Lcvette> they did fix dark 2
[11:45:24] <Lcvette> you just didn't have a border around your upper number boxes anymore
[11:46:36] <Lcvette> if you just want to seperate the sections of buttons but not want to use a border to do it there are ways
[11:46:54] <Lcvette> you can use the divider lines
[11:47:04] <Lcvette> and just make them transparent
[11:47:21] <Lcvette> that way they won't have an effect on the outer edges of the button alignment
[11:52:07] * hazzy-m thinks qtpyvcp should have it's own install system
[11:52:28] <hazzy-m> `qtpyvcp install git+https://github.com/jethornton/mill_touch.git`
[11:52:44] <JT[m]1> that should break right now lol
[11:53:08] <hazzy-m> then we could do the right things with the example configs etc.
[11:54:10] <JT[m]1> what's wrong now with the example configs?
[11:54:55] <hazzy-m> with the editable install they do not get placed in the linuxcnc/configs folders
[11:55:45] <hazzy-m> but that is low priority right now lol
[11:57:32] <JT-Shop> ah I see, at least my pip install sorta works now
[11:58:23] <JT-Shop> except now I get templatenotfound config.yml
[11:58:45] <hazzy-m> I'm looking into that now
[12:10:33] <JT[m]1> thanks
[12:14:59] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/fjJmT
[12:15:01] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 03ad3a2ca - we don't depend on pygcode anymore
[12:16:51] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+442/-0/±0] 13https://git.io/fjJmk
[12:16:53] <Not-e6c6> [02qtpyvcp] 07traviscibot 03a06fad6 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[12:18:03] <JT[m]1> is that what broke my mill touch install?
[12:18:29] <hazzy-m> no, but I found it while trying to debug it lol
[12:18:42] <Lcvette> hurray!
[12:18:46] <Lcvette> you did it?
[12:19:00] <Lcvette> the error thats been popping up?
[12:19:08] <Lcvette> \o/
[12:22:32] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/fjJms
[12:22:34] <Not-e6c6> [02qtpyvcp] 07KurtJacobson 039026899 - BUG: fix "No JSON object could be decoded" error
[12:24:35] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+442/-0/±0] 13https://git.io/fjJmc
[12:24:37] <Not-e6c6> [02qtpyvcp] 07traviscibot 030b68826 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[12:28:18] <hazzy-m> JT: I'm not getting the template error anymore, are you still getting it?
[12:30:48] <JT-Shop> I'm running installed version of qtpyvcp on the BP mill
[12:32:13] <JT-Shop> no error here, except I didn't get the themes directory lol
[12:33:07] <hazzy-m> I get the themes dir only when installing withough the editable flag
[12:33:13] <hazzy-m> whith out*
[12:33:29] <JT-Shop> yea I still get it... it helps to pick the right sim lol
[12:34:19] <JT-Shop> I install with pip install git+https://github.com/jethornton/mill_touch.git
[12:35:00] <hazzy-m> ok, that should give your the thems dir
[12:35:09] <JT-Shop> setup installs the mill_touch_sim directory in the correct place now but does not include the subdirectory
[12:35:21] <JT-Shop> themes
[12:36:10] <JT-Shop> I won't get that fix until the next release
[12:36:12] * hazzy-m uploaded an image: image.png (80KB) < https://matrix.org >
[12:36:52] <hazzy-m> its about time for a release ...
[12:37:39] <Not-e6c6> [02qtpyvcp] 07KurtJacobson created tag 03v0.2.2 - 13https://git.io/fhCou
[12:37:41] <Not-e6c6> [02qtpyvcp] 07KurtJacobson tagged 039026899 as 03v0.2.2 13https://git.io/fjJm6
[12:39:15] <JT[m]1> that screenshot is from cloned mill touch pip install -e . or pip install .
[12:39:42] <hazzy-m> pip install .
[12:40:05] <Not-e6c6> [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+442/-0/±0] 13https://git.io/fjJm9
[12:40:07] <Not-e6c6> [02qtpyvcp] 07traviscibot 03257ab9f - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
[12:40:10] <JT[m]1> hmm, that's cool that it worked there
[12:40:30] <hazzy-m> and that gives me the same results as `pip install git+https://github.com/jethornton/mill_touch`
[12:41:03] * JT[m]1 goes back to the shop...
[12:41:35] <Not-e6c6> [02qtpyvcp] 07KurtJacobson published 03v0.2.2 | v0.2.2 - 13https://git.io/fjJm7
[12:42:01] -!- travis-ci has joined #hazzy
[12:42:02] <travis-ci> kcjengr/qtpyvcp#841 (v0.2.2 - 9026899 : Kurt Jacobson): The build passed.
[12:42:02] <travis-ci> Diff view : https://github.com
[12:42:02] <travis-ci> Build details : https://travis-ci.org
[12:42:02] -!- travis-ci has parted #hazzy
[12:43:39] <JT-Shop> lol too many similar named configs
[12:47:44] <JT-Shop> I just updated qtpyvcp and still get templatenotfound config.yml
[12:49:03] <JT-Shop> hmm the old bp_touch still works
[12:49:10] <hazzy-m> hmmm
[12:54:45] <JT[m]1> https://paste.ubuntu.com
[12:54:57] <JT[m]1> I wonder if I borked up the setup.py file
[12:58:25] <JT[m]1> something is screwy on the BP mill, I just installed on my linux mint pc and it works fine
[12:59:19] <hazzy-m> the setup.py and config.yml look fine
[13:01:09] <JT[m]1> thanks, took me a few minutes to sort out what you did to make it copy directories and stuff lol
[13:02:41] * Lcvette uploaded an image: dark1.png (58KB) < https://matrix.org >
[13:03:45] <JT[m]1> the darker borders look much better
[13:04:08] <Lcvette> no borders
[13:04:29] <Lcvette> now the buttons align at the outer edges
[13:04:51] <Lcvette> thats why your dark2 appears to look misaligned was because your borders were gone
[13:04:57] <JT[m]1> is that dark2?
[13:05:03] <Lcvette> yes
[13:05:13] <Lcvette> no thats dark1
[13:05:16] <Lcvette> sek
[13:05:27] <JT[m]1> I thought so
[13:07:31] * Lcvette uploaded an image: dark2.png (59KB) < https://matrix.org >
[13:07:37] <Lcvette> thats dark 2
[13:08:25] <JT[m]1> I like dark1 better
[13:08:27] <Lcvette> notice on the right side in the G5x tab, the border is the same color as the background
[13:08:28] <Lcvette> so its invisible
[13:08:29] <Lcvette> same thing was happening on the other side
[13:09:02] <Lcvette> so now just spaces differentiate the number groupings rather than borders
[13:09:12] <Lcvette> so you can change whatever colors you like
[13:09:23] <Lcvette> feels more natural and less cramped
[13:09:44] <Lcvette> can change the space size too
[13:10:42] <JT[m]1> I rather like the grouping borders letting you know things belong together helps to keep your focus
[13:11:19] <Lcvette> ok
[13:11:32] * JT[m]1 goes to town to run some errands
[13:11:49] <JT[m]1> make a branch for that change
[13:12:05] <Lcvette> nah, if you don't like it i'll just ditch it
[13:12:06] <Lcvette> no biggie
[13:12:59] <JT[m]1> I like the dark1 but not dark2
[13:13:13] <JT[m]1> so make a branch so I can see what you did
[13:13:23] <Lcvette> dark 2 just needs to change the border color
[13:13:35] <Lcvette> its still there
[13:14:09] <Lcvette> that was the original issue
[13:14:09] <JT[m]1> yea I can see the offset on Set Z and Set Z Y Z buttons
[13:14:19] <Lcvette> when it vanished it looked unaligned
[13:14:35] <JT[m]1> yep
[13:14:36] <Lcvette> on the otherside where i made changes its gone
[13:15:53] <Lcvette> in order to move the buttons to the edge i had to nuke the frame
[13:16:07] <Lcvette> so upper and lower buttons aligned
[13:16:52] <Lcvette> I can add frames back in
[13:17:08] <Lcvette> and add a frame to the lower buttons as well which will also align them
[13:17:16] <Lcvette> but that might start to get a bit busy
[13:17:27] <Lcvette> it looks really crowded when i tried it here last night
[13:17:35] <JT[m]1> make a branch right there
[13:17:45] <Lcvette> ok
[13:19:06] * Lcvette uploaded an image: branch.png (164KB) < https://matrix.org >
[13:19:18] <Lcvette> if i push right now will it create a branch automatically?
[13:19:26] <Lcvette> because of your changes?
[13:19:37] <Lcvette> hazzy JT
[13:19:39] <Lcvette> ?
[13:21:15] <JT[m]1> I think it will ask you a question about origin or something like that
[13:21:33] <Lcvette> think i did it right
[13:21:46] <Lcvette> under origin there is now a Lcvette
[13:22:21] * Lcvette uploaded an image: branch2.png (72KB) < https://matrix.org >
[13:22:32] <JT[m]1> yea we have a branch!
[13:22:42] <JT[m]1> ok I'm off to town now be back in a bit
[13:22:46] <Lcvette> \o/ Hurray!
[13:22:48] <Lcvette> :D
[13:22:49] <Lcvette> k
[13:22:52] <Lcvette> have fun!
[13:24:19] <JT[m]1> I think I ride the bluewing
[13:24:43] <Lcvette> nice!
[13:33:49] <Lcvette> hazzy: how come i can't reset to the newest master?
[13:36:29] <hazzy-m> what error do you get?
[13:36:46] * hazzy-m is trying to update the mill but the breaker keeps tripping
[13:36:46] <Lcvette> it just wouldn't let me, i restarted gitkraken and it worked
[13:36:52] <Lcvette> was wierd
[13:37:07] <hazzy-m> strange
[13:38:07] <Lcvette> maybe because i was going between jt's kraken and qtpyvcp
[13:38:15] <TurBoss> hey whats up with vtk?
[13:38:17] <TurBoss> and metric
[13:38:55] <TurBoss> said something
[13:39:51] <Lcvette> whats the issue?
[13:40:07] <Lcvette> G21?
[13:40:23] <Lcvette> just tried probe basic in G21 works good
[13:42:19] <Lcvette> turboss, how do i test the issue here?
[13:43:08] * hazzy-m tests with the xyz-metric.ini sim
[13:47:38] <TurBoss> I run my machine
[13:47:44] <TurBoss> with my real ini
[13:48:03] <Lcvette> i know the problem
[13:48:34] <Lcvette> you need an ATC turboss!
[13:48:35] <Lcvette> :D
[13:48:36] <Lcvette> '\o/
[13:48:56] <TurBoss> oh
[13:49:06] <TurBoss> your probem
[13:49:13] <TurBoss> :)
[13:49:16] <TurBoss> bougme one
[13:49:16] <Lcvette> no your problem
[13:49:22] <Lcvette> you need the ATC
[13:49:28] <Lcvette> make
[13:49:28] <TurBoss> but wait
[13:49:33] <Lcvette> you have router?
[13:49:34] <TurBoss> I dont have an VMC
[13:49:44] <Lcvette> winerack
[13:50:14] <Lcvette> same principles, just doesn't have the spinny spinny
[13:50:38] <Lcvette> or you have er collet spindle
[13:57:21] <TurBoss> no
[13:57:37] <TurBoss> discontinued suhnner collet
[13:57:47] <TurBoss> propietary one
[13:57:55] <Lcvette> dunno
[13:58:07] <Lcvette> is it power drawbar oprated?
[13:58:09] <TurBoss> not ER
[13:58:16] <Lcvette> or wrenches
[13:58:18] <Lcvette> manual
[13:58:27] <Lcvette> uses tool holder?
[13:58:55] <TurBoss> I have to play
[13:58:59] <TurBoss> latter
[13:59:08] <Lcvette> :/
[14:01:18] <TurBoss> some robots man
[14:34:08] <JT-Shop> crap all my configurations are gone from the BP mill...
[14:34:33] <Lcvette> i broke?
[14:35:18] <JT-Shop> I just uninstalled qtpyvcp about 6 times then installed it...
[14:35:33] * JT-Shop gives up today and goes to cut firewood...
[14:39:12] * hazzy-m has put 0.6hrs on the compressor so far today
[14:43:28] <JT-Shop> and I still have the can't find config.yml issue but that don't matter anymore lol
[15:27:06] -!- JT-Shop2 has quit [Read error: Connection reset by peer]
[15:27:06] -!- JT-Shop has quit [Read error: Connection reset by peer]
[15:27:07] -!- jthornton has quit [Read error: Connection reset by peer]
[15:27:35] -!- jthornton has joined #hazzy
[15:27:36] -!- JT-Shop2 has joined #hazzy
[15:28:16] -!- JT-Shop has joined #hazzy
[16:32:54] -!- JT-Shop has quit [Read error: Connection reset by peer]
[16:32:56] -!- jthornton has quit [Read error: Connection reset by peer]
[16:32:56] -!- JT-Shop2 has quit [Read error: Connection reset by peer]
[16:33:22] -!- JT-Shop has joined #hazzy
[16:33:50] -!- jthornton has joined #hazzy
[16:34:05] -!- JT-Shop2 has joined #hazzy
[17:27:29] -!- biqut2 has quit [Remote host closed the connection]
[17:33:29] <hazzy-m> Lcvette have you painted the lathe stand yet?
[18:35:21] <Lcvette> hazzy: no
[18:35:24] <Lcvette> thats on hold
[18:35:26] <roguish[m]> Lcvette: fyi. i spoke with Syil today.
[18:35:58] <Lcvette> i decided to upgrade to servos afterall rather than dishout for new power supply
[18:36:22] <Lcvette> roguish: hey man, yeah? how did it go, any good info or nothing you wanted to hear?
[18:37:22] <roguish[m]> they're sending me info, and budget quote. for least expensive machine.
[18:37:43] <Lcvette> machine or least expensive X7?
[18:37:52] <roguish[m]> x7
[18:38:05] <Lcvette> nice
[18:38:14] <Lcvette> yeah i don't hink you'd be happy with anything smaller than the X7
[18:38:31] <Lcvette> its already borderlining on the small side
[18:38:33] <roguish[m]> gotta work out the business plan/model.
[18:38:39] <Lcvette> yeah
[18:38:48] <Lcvette> thats always a good idea
[18:38:55] <Lcvette> make sure you can justify it
[18:39:16] <roguish[m]> don't want ot be a general job shop. but out here it might work out being a specialty prototype shop.
[18:39:39] <Lcvette> oh, just an fyi i don't think i would finance through their finance company
[18:39:55] <roguish[m]> no , cash is king
[18:39:57] <Lcvette> if that was an option you were considering
[18:40:22] <Lcvette> nothing wrong with financing, just not with those type companies
[18:40:33] <Lcvette> i have some good places if that is an option you were considering
[18:41:10] <Lcvette> real financing not the shady type like crest capital and the other revolving type credit and lease to own scams
[18:41:53] <roguish[m]> heck i could stick it on a credit card and get cash back, lolol
[18:42:03] <Lcvette> yeah but thats revolving
[18:42:13] <Lcvette> you pay annual on it
[18:42:19] <roguish[m]> no, then pay it off.
[18:42:29] <Lcvette> type financing im referring to is same as like auto financing
[18:42:46] <Lcvette> structured payments with a true know what total payoff is at beginning of loan
[18:43:31] <roguish[m]> yeah, yeah, I understand, and totally agree. i'm very careful with my 'debt'
[18:44:13] <Lcvette> one of the machine suppliers i have befriended put me in touch with a company that does financing
[18:44:43] <roguish[m]> anyway, i'll let you know how it goes. nothing is settled yet.
[18:45:56] <Lcvette> https://www.qtfinancial.com
[18:45:58] <Lcvette> bookmark it
[18:49:12] <Lcvette> contact there is Tim Arnold
[18:51:45] <Lcvette> he has numerous happy customers on many of the forums too
[18:52:00] <Lcvette> very fair rates
[18:52:02] <Lcvette> low
[18:52:38] <Lcvette> if younbhave a business thats been in business for more than 2 years getting approved is pretty easy
[18:52:49] <Lcvette> simple one page app
[18:53:44] <Lcvette> his direct email is tim@qtfinancial.com
[18:54:03] <Lcvette> may be worthwhile to see what he has to offer
[18:54:31] <Lcvette> may be better to put yourself in a bit more machine and avoid a big capital layout that may be better spent on other areas ofthe business
[18:58:04] <JT[m]1> hot damn the old pos dell finally booted up... hope it stays up long enough to copy all my emc stuff to the nas
[18:59:23] <JT[m]1> only took 27 tries this time...
[19:00:24] <Lcvette> nice!
[19:02:12] <roguish[m]> JT. how's the gi coming along? i'm ready to try it out this weekend.....
[19:02:13] <JT[m]1> damn got my BP configuration files back and copied to the nas this time... last copy I could find was from 4 years ago
[19:02:38] <roguish[m]> any updated install instructions?
[19:02:44] <roguish[m]> or just the usual git pull ?
[19:02:49] <JT[m]1> making lots of progress with it, the mdi tab is smart now
[19:03:05] <JT[m]1> if you did git clone then yea just a git pull
[19:03:39] <roguish[m]> so, I can make an additional screen and run it along side, right?
[19:04:24] <JT[m]1> if your screen is big enough you can add anything you want anywhere you want
[19:04:51] <hazzy-m> roguish: and yes, you can add another window if you like for a second screen
[19:05:38] <roguish[m]> well, have the 22" touch sceen, and will have at 1 more. probably 24" regular 1080
[19:05:42] * JT[m]1 thinks pip uninstall is evil now
[19:06:36] <JT[m]1> the mill touch is 1024 x 768
[19:08:11] <Lcvette> is it not supposed to be that size JT?
[19:08:46] <Lcvette> did pip uninstall remove your config files?
[19:09:49] <roguish[m]> remember the credo: backup, backup, backup
[19:09:59] <JT[m]1> I think it did, I'll do some testing in the morning, just setting up the bp pc down here in the beer cave
[19:11:33] <JT[m]1> it may be time for our own install/uninstall script
[19:12:02] <JT[m]1> Lcvette: what the mill touch?
[19:13:15] <Lcvette> JT: yeah
[19:13:24] <Lcvette> were you saying it changed?
[19:13:29] <Lcvette> did i change it?
[19:13:52] <JT[m]1> no, I was just telling roguish what size it I made it\
[19:14:31] <JT[m]1> this box of screws is marked "Computer Screws 7-96"
[19:14:57] <Lcvette> wow, those are a wierd size
[19:15:14] <JT[m]1> it's a date
[19:20:03] <JT[m]1> I put those screws in that box 23 years ago lol
[19:24:35] <JT[m]1> hazzy: we still need .xsessionrc to be able to edit a file and run qtpyvcp from the command line
[19:28:46] <JT[m]1> hazzy: pip uninstall mill_touch is the demond that deleted my linuxcnc/configs directory
[19:29:10] <JT[m]1> if you get a chance take a look at the setup.py and see if you can spot my error
[19:32:12] * JT[m]1 uploaded an image: Screenshot at 2019-03-22 18-29-51.png (14KB) < https://matrix.org >
[19:32:44] <JT[m]1> and there it is bigger than shit going to delete my /home/john/linuxcnc/configs directory
[19:34:43] <Lcvette> :0
[19:35:38] * Lcvette thinks jt better make a copy of the config somewhere just in case
[19:38:09] <hazzy-m> whoa!! That is not right
[19:38:26] <hazzy-m> it should not delete any files other than the ones it installed
[19:38:33] <Lcvette> That's where jt puts his configs for milltouch
[19:39:35] <Lcvette> But I would suspect it should be /mill_touch
[19:39:45] <Lcvette> Instead of configs
[19:39:58] <Lcvette> Missing the end of the path
[19:40:55] <Lcvette> ?
[19:41:19] <Lcvette> I copied the whole mill_touch folder into the configs folder
[20:24:59] <JT[m]1> yea I think I see the issue, testing in the am
[20:49:49] <TurBoss> yo
[20:54:27] <Lcvette> Yo
[20:54:46] <Lcvette> Turboss is here \o/
[20:55:22] <TurBoss> there still 2 bugs in ATC right?
[20:55:33] <Lcvette> Think so
[20:55:52] <TurBoss> change tab one
[20:55:58] <Lcvette> Yup
[20:56:05] <Lcvette> What's other?
[20:56:10] <TurBoss> how do I fix that
[20:56:33] <Lcvette> Not sure
[20:56:43] <TurBoss> brb
[20:56:52] <Lcvette> It's like a refresh issue
[21:03:59] <Lcvette> If you press M6 again to hey straighten up
[21:04:07] <Lcvette> They*
[21:10:52] <TurBoss> a +90 is missing somwhere
[21:11:30] <Lcvette> Is missing?
[21:11:46] <Lcvette> But they work except when you talk?
[21:11:49] <Lcvette> Tab
[21:12:06] <TurBoss> we need to add +90 when tab returns
[21:12:16] <TurBoss> to the atc rotation
[21:12:23] <Lcvette> Ah
[21:13:49] <Lcvette> Is it 90?
[21:14:21] <TurBoss> no
[21:14:28] <Lcvette> I thought it was off by the amount of the previous pocket count
[21:14:29] <TurBoss> should be 30
[21:14:32] <TurBoss> :=)
[21:17:10] * TurBoss sent a long message: < https://matrix.org >
[21:17:16] <TurBoss> added this on line 12
[21:17:37] <Lcvette> Works?
[21:17:45] <TurBoss> oops
[21:17:47] <TurBoss> no
[21:17:56] <Lcvette> Being
[21:18:25] <Lcvette> Begin = being?
[21:18:54] <TurBoss> bang
[21:19:02] <Lcvette> Kapow
[21:19:10] <Lcvette> Shblam
[21:43:51] -!- biqut2 has joined #hazzy
[22:39:44] <Lcvette> Did you figure it?
[23:27:49] -!- biqut2 has quit [Read error: Connection reset by peer]
[23:27:57] -!- biqut2 has joined #hazzy