#hazzy | Logs for 2019-04-17
Back
[09:49:49] -!- logs has joined #hazzy
[09:49:50] -!- mode/#hazzy [+o logs] by ChanServ
[10:17:33] <Lcvette> morning
[10:17:42] <Lcvette> whoa, hope he is ok!
[11:45:21] <jthornton> ouch that's rough he got burned that bad... I hate to hear that
[12:16:38] * TurBoss uploaded a video: video_2019-04-17_18-16-22.mp4 (1355KB) < https://matrix.org >
[12:19:32] <hazzy-m> LOL
[12:19:46] <hazzy-m> el chapas is coding
[12:19:50] <TurBoss> cyber cat
[12:20:00] <TurBoss> :-)
[12:20:04] <hazzy-m> el chapas took down the matrix
[12:20:26] <TurBoss> sup hazzy ? how is Tholstrup Dr
[12:21:30] <hazzy-m> he seems to be doing ok, he is in good spirits at least
[12:21:42] <hazzy-m> but he will be in the hospital for several months they say :(
[12:21:45] <TurBoss> cool
[12:21:53] <TurBoss> not that cool
[12:22:48] <hazzy-m> he can use his left hand and keeps giveing the peace sign to the doctors and nurses :D
[12:23:01] <TurBoss> hehe
[12:23:11] <TurBoss> poor guy
[12:23:16] <TurBoss> burns arent good
[12:24:09] <hazzy-m> no, but he is a tough fellow, if anybody can get thru it he can!
[12:26:05] <TurBoss> this matrix stuff is getting crazzy
[12:26:22] <TurBoss> its parsing since enabled but implemented today
[12:27:46] <TurBoss> a wild Lcvette apears
[12:28:30] -!- test has joined #hazzy
[12:28:49] <Lcvette> kitty took the red pill
[12:28:50] <Lcvette> :D
[12:28:52] <hazzy-m> test
[12:28:53] test is now known as Guest89506
[12:29:23] <Lcvette> pass
[12:29:24] <Lcvette> ?
[12:29:28] <hazzy-m> bridge is back up!
[12:29:31] <Lcvette> C
[12:29:37] <Lcvette> multiple choice?
[12:29:41] -!- Guest89506 has quit [Client Quit]
[12:29:44] <Lcvette> i hope not essay
[12:29:45] <hazzy-m> lol
[12:30:04] <hazzy-m> actual answer was E
[12:30:37] * hazzy-m goes to get 1000ft of 8awg wire
[12:31:07] * hazzy-m brings a gold mine to pay for it
[12:31:08] <Lcvette> don't do it
[12:31:09] <Lcvette> lol
[12:31:24] <Lcvette> its gonna be expensive
[12:36:48] <TurBoss> Lcvette: how would a linear atc look?
[12:36:59] <TurBoss> like the carousel but fixed?
[12:37:02] <Lcvette> winerack
[12:37:09] <TurBoss> oh
[12:37:17] <Lcvette> straight line for a router
[12:37:29] <Lcvette> usually at the end of the router
[12:37:41] <Lcvette> the rack is stationary
[12:37:51] <TurBoss> yes i saw them
[12:37:58] <Lcvette> sek
[12:38:29] <Lcvette> https://www.youtube.com
[12:38:42] <Lcvette> this is linear
[12:38:47] <Lcvette> much simpler
[12:39:03] <Lcvette> i already started making a PB atc page to fit one
[12:39:37] <Lcvette> should only need the hide show and refresh pocket component
[12:39:41] <TurBoss> we can draw multiple pockets inline with a repeater
[12:39:43] <Lcvette> no other animation
[12:39:50] <Lcvette> yes
[12:39:56] <Lcvette> linear repeeater
[12:43:56] <Lcvette> but i think maybe best to hash out and test everything on the first one before going to far on anything more
[12:44:04] <Lcvette> in case there are changes to be made
[12:44:43] <Lcvette> and of course easier once atc is merged so i don't add too much more of a nightmare for that
[12:44:48] <Lcvette> in the ui file
[12:44:55] <TurBoss> yup
[12:46:37] <Lcvette> but i have some models for the winerack holders
[12:47:28] <Lcvette> they are pretty easy, will take a day to do them like i did them for the atc
[12:47:42] <TurBoss> no rush
[12:48:50] <Lcvette> for the repeater, can you set it to fit X amount in a certain space?
[12:49:00] <Lcvette> and scale accordingly?
[12:55:19] <TurBoss> yes
[12:55:46] <TurBoss> we can draw a raw rectangle
[12:55:54] <TurBoss> the pocket slots on it
[13:00:17] <Lcvette> for example, if i have a 1000px wide space for the atc finger pockets, can the repeater auto fill the width and scale the size of the repeated pocket images to fit?
[13:00:31] <Lcvette> mor pockets images shrink in size etc?
[13:00:48] <TurBoss> I don't visualize it
[13:00:49] <TurBoss> sek
[13:00:59] <Lcvette> like the round carousel
[13:01:11] <Lcvette> had to shrink as more pockets were added
[13:01:14] <TurBoss> if 8 pockets scale pics to fit?
[13:01:25] <Lcvette> correct
[13:01:38] <Lcvette> if 16 pockets they would need to be smaller
[13:01:43] <Lcvette> etc
[13:01:55] <TurBoss> yes with and height could be a calculated value
[13:01:57] <Lcvette> 1000px/number of pockets
[13:01:57] <TurBoss> like
[13:02:18] <TurBoss> ```
[13:02:19] <TurBoss> width: parent / pocket num * 100px
[13:02:28] <TurBoss> ```
[13:02:29] <TurBoss> width: parent.width / pocket num * 100px
[13:02:33] <Lcvette> k
[13:02:59] <Lcvette> \o/
[13:03:28] <Lcvette> then i could make just one image
[13:03:34] <Lcvette> and it could be repeated and scaled
[13:06:06] <TurBoss> sure!
[13:07:10] <Lcvette> huray!
[13:16:54] * JT[m]1 uploaded an image: VectorImage_2019-04-17_121645.jpg (69KB) < https://matrix.org >
[13:17:30] <TurBoss> logs
[13:17:34] <TurBoss> lol
[13:18:10] <Lcvette> JT: bury it JT
[13:18:17] <Lcvette> make a cool underground fort
[13:19:40] <JT[m]1> Dangerous cut that close to the shop and above it too
[13:19:55] <Lcvette> i know
[13:20:35] <Lcvette> mudslide
[13:20:39] <Lcvette> :O
[13:20:59] <Lcvette> need to plant some deep rooted grass on that bank
[13:22:39] <JT[m]1> Trying to since last year
[13:23:24] <Lcvette> you get alot of snow there huh?
[13:23:32] <Lcvette> keep forgetting about that
[13:24:34] <Lcvette> what is your annual temp range for the area
[13:24:55] * TurBoss uploaded a video: 20190417_114800.mp4 (25691KB) < https://matrix.org >
[13:25:49] <Lcvette> TurBoss: whatcha got there turboss?
[13:25:54] <TurBoss> speed
[13:26:29] <TurBoss> this morning they were firing fireworks
[13:26:36] <Lcvette> lol
[13:29:16] <JT[m]1> Usually not to much snow
[13:30:06] <JT[m]1> Teens in the winter, 90s in the summer
[13:30:08] <Lcvette> will centipede grow there?
[13:30:26] <JT[m]1> Dunno what that is
[13:30:32] <Lcvette> grass
[13:30:41] <Lcvette> it creeps
[13:31:03] <Lcvette> i did not plant a back yard when i moved in only sodded the front with bermuda
[13:31:33] <Lcvette> my back yard from my neighbors house one little strand of centipede came over and now i have a full centipde back yard
[13:31:50] <Lcvette> it is a touch resiliant grass with deep roots
[13:32:02] <Lcvette> pretty too
[13:32:12] <Lcvette> low maintenance
[13:45:54] * JT[m]1 uploaded an image: VectorImage_2019-04-17_124536.jpg (75KB) < https://matrix.org >
[13:49:05] <JT[m]1> Ain't no maintenance on that hill lol
[13:51:36] -!- JT-Shop has quit [Remote host closed the connection]
[13:52:41] -!- JT-Shop has joined #hazzy
[14:07:26] * hazzy-m 's clutch peddle went to the floor
[14:07:40] <Lcvette> cable or hydraulic?
[14:07:47] <hazzy-m> drove home in second and didn't stop lol
[14:07:54] <hazzy-m> hydraulic
[14:07:59] <Lcvette> can shift with no clutch
[14:08:06] <hazzy-m> fluid is goodand no leaks ...
[14:08:08] <Lcvette> have to rev match
[14:08:39] <hazzy-m> hard from a stand still
[14:08:45] * JT[m]1 uploaded an image: VectorImage_2019-04-17_010830.jpg (134KB) < https://matrix.org >
[14:08:48] <Lcvette> pivot fork
[14:08:57] <hazzy-m> I can get into rev by rolling back, but I'm up hill
[14:09:00] <JT[m]1> This is what we use usually here
[14:09:14] <hazzy-m> JT: same here, great stuff
[14:10:17] <JT[m]1> Need a new sack, that one is 2 years old
[14:10:38] <Lcvette> throw out bearing
[14:10:57] <Lcvette> what vehiclke hazzy?
[14:11:48] <hazzy-m> '92 mazda B2600i
[14:14:02] <Lcvette> could also be a slave cylinder bolt came out
[14:14:11] <Lcvette> that happened to me on the vette once
[14:14:44] <Lcvette> or broke
[14:15:14] <Lcvette> they can pivot if that happens
[14:15:50] <Lcvette> if you aren't leaking fluid anywhere and no noises, that is probably a likely scenario
[14:16:02] <Lcvette> and an easy fix
[14:21:00] <hazzy-m> I'm getting ready to walk down and have a better look at the slave cylender and fork
[14:31:21] <Lcvette> hopefully if its a bolt it came out and didn't break
[14:31:38] <Lcvette> mine broke and was a bear to get removed
[15:02:46] * JT[m]1 uploaded an image: VectorImage_2019-04-17_015748.jpg (19KB) < https://matrix.org >
[15:17:45] <Lcvette> kittens?
[15:36:22] * Lcvette uploaded an image: latc_fork.png (88KB) < https://matrix.org >
[15:37:43] <JT[m]1> Kitten
[15:40:14] * Lcvette uploaded an image: latc_fork.png (17KB) < https://matrix.org >
[15:40:20] <Lcvette> turboss
[15:40:26] <Lcvette> ^^^
[15:40:28] <Lcvette> atc fork
[15:47:35] <TurBoss> nice
[18:11:48] * JT[m]1 uploaded an image: VectorImage_2019-04-17_051141.jpg (47KB) < https://matrix.org >
[18:40:50] * JT-Shop calls it a day
[20:01:47] <Lcvette> hurray, lcvette got the new HP 8300 Elite USDT pc setup too
[20:01:57] <Lcvette> it has great latency as well
[20:02:13] * Lcvette uploaded an image: chris-17Apr2019-2560.png (40KB) < https://matrix.org >
[20:05:11] <Lcvette> \o/
[21:02:39] -!- ReneHopfGitter[m has quit [*.net *.split]
[21:11:20] -!- ReneHopfGitter[m has joined #hazzy
[22:09:52] * hazzy-m uploaded an image: image.png (76KB) < https://matrix.org >
[22:12:02] <hazzy-m> from a corvair ad, they did the same stop in an econoline and a corvair
[22:12:40] <hazzy-m> IIRC when the econoline landed the doors poped open lol
[22:25:10] <Lcvette> endo
[22:25:23] <Lcvette> hazzy: o/
[22:25:57] <hazzy-m> o/
[22:26:20] <Lcvette> what is the name of that thumb drive download for making the linuxcnc stretch installation s
[22:28:25] <Lcvette> hazzy: ?
[22:30:35] <Lcvette> hazzy: :O
[22:33:49] <Lcvette> hazzy: :(
[22:33:58] <Lcvette> trying to help a friend
[22:34:08] <Lcvette> load linuxcnc first time
[22:34:31] <Lcvette> haven't had to make a thumb drive since before my pc crashed and i lost all those programs
[22:36:42] <Lcvette> turboss
[22:36:44] <Lcvette> ?
[22:42:54] <Lcvette> HAZZY!!
[22:42:55] <Lcvette> lol
[22:47:41] <Lcvette> https://www.balena.io
[22:47:43] <Lcvette> this it?
[22:58:13] <hazzy-m> Yes!
[22:58:18] <hazzy-m> That's ot
[22:58:30] <hazzy-m> Sorry, was away
[23:06:01] <Lcvette> o/
[23:06:05] <Lcvette> got it!