#hazzy | Logs for 2019-04-24

Back
[00:03:01] <TurBoss> does something?
[00:03:40] <Lcvette> was saving my commits
[00:03:44] <TurBoss> cool
[00:04:51] <Lcvette> ok i checked it out
[00:04:54] <Lcvette> im in probe basic
[00:05:06] <TurBoss> ok
[00:05:11] <Lcvette> what im looking at?
[00:05:12] <TurBoss> no?¿
[00:05:20] <TurBoss> just pan and something
[00:05:43] <TurBoss> 2 finger stuff and that
[00:05:44] <Lcvette> pan isn't working
[00:06:14] <Lcvette> its not clickable
[00:06:21] <Lcvette> looks like its set to toggle
[00:08:42] <TurBoss> nothing?
[00:09:10] <TurBoss> could you try to zoom with 2 fingers?
[00:09:22] <TurBoss> I can't test on my sid
[00:09:24] <TurBoss> de
[00:09:35] <Lcvette> no zoom with two fingers
[00:09:43] <Lcvette> but may be the drivers
[00:09:52] <TurBoss> no idea
[00:10:03] <Lcvette> for the touch screen
[00:10:16] <Lcvette> think its working in single touch mode
[00:10:16] <TurBoss> didn't you installed them?
[00:10:30] <Lcvette> in windows it has multitouch mode
[00:11:00] <TurBoss> hmmm
[00:11:34] <TurBoss> https://nlsdisplays.com
[00:13:29] <Lcvette> http://media.elotouch.com
[00:13:38] <Lcvette> this is the one we have
[00:13:41] <TurBoss> ok
[00:15:51] <TurBoss> # means sudo
[00:15:55] <TurBoss> #
[00:15:56] <TurBoss> ##
[00:15:59] <TurBoss> ### #
[00:16:02] * Lcvette sent a long message: < https://matrix.org >
[00:16:44] <Lcvette> how do i see if its set to single touch?
[00:16:56] <TurBoss> did you installed anything before?
[00:17:01] <Lcvette> i don'y know what kernels are
[00:17:13] <Lcvette> just this driver
[00:17:20] <Lcvette> on this hard drive
[00:17:52] <TurBoss> did you installed following that pdf?
[00:17:53] <TurBoss> what you pasted is to disable multitouch
[00:19:01] <Lcvette> it is?
[00:19:09] <Lcvette> yes i just copied everything
[00:19:17] <Lcvette> i was just looking at it
[00:19:29] <Lcvette> and wondering if i inadvertently diabled multitouch
[00:19:32] <Lcvette> :(
[00:19:37] <TurBoss> no
[00:19:43] <TurBoss> you had to manually edit a file
[00:19:50] * Lcvette sent a long message: < https://matrix.org >
[00:20:10] <Lcvette> i did the (or) too
[00:20:31] <TurBoss> can you type
[00:20:55] <TurBoss> ```
[00:20:55] <TurBoss> sudo systemctl status elo.service
[00:21:32] * Lcvette sent a long message: < https://matrix.org >
[00:21:56] <TurBoss> seems fine
[00:22:25] <TurBoss> duno
[00:23:23] <TurBoss> Lcvette: did you issued thoose commands described on the pdf with sudo ?
[00:23:36] <TurBoss> # means that need to be superuser
[00:23:45] <Lcvette> yes
[00:23:56] <TurBoss> cool
[00:24:12] <TurBoss> can you run the calibration tool from elo?
[00:24:46] <TurBoss> issue
[00:24:47] <TurBoss> ```
[00:24:48] <TurBoss> ps -e |grep elo
[00:24:50] <TurBoss> issue
[00:24:51] <TurBoss> ```
[00:24:52] <TurBoss> ps -e |grep elo
[00:25:06] * Lcvette sent a long message: < https://matrix.org >
[00:25:36] * Lcvette sent a long message: < https://matrix.org >
[00:25:40] <TurBoss> no action required
[00:25:51] <TurBoss> defaults
[00:25:54] <TurBoss> are good
[00:26:34] <Lcvette> im set to multitouch?
[00:26:40] <TurBoss> yup
[00:26:46] <Lcvette> it doesn't
[00:26:48] <Lcvette> :(
[00:27:08] <TurBoss> :(
[00:27:22] <Lcvette> when i tested on my windows machine it worked great with multitouch
[00:27:28] <Lcvette> just like phone or tablet
[00:27:32] <TurBoss> cool
[00:27:39] <Lcvette> but no linux
[00:27:42] <Lcvette> is busted
[00:27:47] <TurBoss> ```
[00:27:48] <TurBoss> # cd /etc/opt/elo-mt-usb
[00:27:48] <TurBoss> # ./elova
[00:27:49] <Lcvette> too much popcorn kernels
[00:29:12] <Lcvette> that did calibration
[00:29:20] <TurBoss> ok
[00:30:27] <TurBoss> so drivers is installed and working
[00:30:38] <Lcvette> yes
[00:30:47] <Lcvette> it works fine as single touch
[00:30:52] <Lcvette> mouse event type
[00:31:14] <Lcvette> but two finger drag and expand on the vtk would be sweet
[00:31:24] <Lcvette> :O
[00:31:28] <TurBoss> :)
[00:31:44] <Lcvette> i will research it further tomorrow
[00:31:49] <TurBoss> ok
[00:31:52] <Lcvette> maybe contact elo and ask if they have any ideas
[00:32:01] <TurBoss> good
[00:32:29] <Lcvette> but for single touch touch screen a pan button is going to be necessary
[00:33:03] <Lcvette> it sooms right off screen the way the focul point is set
[00:33:10] <Lcvette> zooms*
[00:33:32] <TurBoss> I should fix my screen
[00:33:39] <TurBoss> it works fine until I login
[00:33:49] <TurBoss> on the greeter
[00:33:59] <Lcvette> you have touch screen?
[00:34:01] <Lcvette> :O
[00:34:04] <TurBoss> little
[02:17:28] -!- jthornton has quit [Read error: Connection reset by peer]
[02:17:43] -!- JT-Shop2- has quit [Read error: Connection reset by peer]
[02:18:43] -!- JT-Shop has quit [Ping timeout: 276 seconds]
[02:22:11] -!- JT-Shop2 has joined #hazzy
[02:22:13] -!- JT-Shop has joined #hazzy
[02:22:14] -!- jthornton has joined #hazzy
[03:29:13] <Lcvette> https://youtu.be
[06:02:19] <hazzy-m> morning
[06:04:08] <jthornton> morning
[07:03:48] <TurBoss> mornming
[11:14:51] <TurBoss> JT: I would like to make qtpyvcp widgets from your mill touch v6
[11:33:41] <JT[m]1> have fun!
[11:34:50] <JT[m]1> which one are you thinking of making into a widget?
[12:12:14] <Lcvette> morning
[12:17:05] <TurBoss> duno
[12:17:14] <TurBoss> wich is fine to pick?
[12:27:52] <Lcvette> \o/
[12:34:50] <Lcvette> TurBoss: hola turboss
[12:47:12] <Lcvette> TurBoss: im in pycharm, is do you know if there is a way to give the subroutine file content some colors like if it were python? or something?
[12:47:23] <Lcvette> not sure what type of code it is really
[12:47:46] <Lcvette> would love to have something other then all white, makes it easy to miss mistakes
[12:47:49] <TurBoss> no
[12:47:59] <TurBoss> havent foubd
[12:50:05] <JT[m]1> Pick any one you like
[13:08:22] <Not-e6c6> [02qtpyvcp] 07marfis89 opened issue 03#10: File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/vcp_chooser/vcp_chooser.py", line 82, in get_vcp_data with open(vcp_config_file, 'r') as fh: IOError: [Errno 2] Datei oder Verzeichnis nicht gefunden: '/home/cnc/.local/lib/python2.7/site-packages/video_tests/qtpyvcp_test/config.yml' Shutting down and cleaning up LinuxCNC... - 13https://git.io/fjsID
[13:21:26] <Not-e6c6> [02qtpyvcp] 07marfis89 commented on issue 03#10: File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/vcp_chooser/vcp_chooser.py", line 82, in get_vcp_data with open(vcp_config_file, 'r') as fh: IOError: [Errno 2] Datei oder Verzeichnis nicht gefunden: '/home/cnc/.local/lib/python2.7/site-packages/video_tests/qtpyvcp_test/config.yml' Shutting down and cleaning up LinuxCNC... -
[13:21:26] <Not-e6c6> 13https://git.io/fjsIj
[13:37:56] <Lcvette> TurBoss: any idea on this?
[13:38:01] * Lcvette sent a long message: < https://matrix.org >
[13:39:00] <TurBoss> is a spontaneous bug caused by a dbus issue
[13:39:09] <Lcvette> i get it during a probing routine
[13:39:22] <Lcvette> im not sure if its my probe routine or something else
[13:39:30] <TurBoss> rrestart linuxcnc
[13:39:34] <Lcvette> im scared to continue making routines now
[13:39:40] <TurBoss> no
[13:39:45] <TurBoss> is fixed on master
[13:40:23] <Lcvette> yeah?then i need merged to master
[13:40:29] <Lcvette> ?
[13:40:31] <TurBoss> nono
[13:40:35] <TurBoss> you can ignor
[13:40:47] <TurBoss> it pops sometimes
[13:40:48] <JT[m]1> I thought that desktop notifications was turned off
[13:40:59] <Lcvette> its hard to, it won't let me get through my probe tests
[13:41:40] <Lcvette> everytime it happens i have to restart everything
[13:41:46] <Lcvette> which im already doing alot for testing
[13:41:49] <Lcvette> lol
[13:41:55] <Lcvette> driving me nuts
[13:41:59] <Lcvette> :O
[13:42:33] <JT[m]1> that was done after you branched off from master
[13:42:41] <Lcvette> yeah
[13:43:01] <JT[m]1> need to merge or whatever it is called
[13:43:16] <Lcvette> this branch was a while back, its gonna need hazzy
[13:43:18] <Lcvette> lol
[13:45:22] <Lcvette> JT: im having a different wierd issue i have not been able to resolve that is an internal error message about exceeding the joint limit and axis limit diuring a probe routine, but if i manually zero the 3 axis and then run the probe routine again it runs through it fine
[13:45:46] <Lcvette> i suspect its in my routine but im not certain what to do about it?
[13:45:48] <Lcvette> any thoughts?
[13:46:56] <Lcvette> https://paste.ubuntu.com
[13:46:56] <JT[m]1> sounds like the probe move is longer than the soft limits, what do you mean manually zero the axes?
[13:47:18] <Lcvette> it isn't
[13:47:27] <Lcvette> well within the limits
[13:47:46] <Lcvette> the offending line is 147
[13:48:04] <Lcvette> max distance is 1.000
[13:48:47] <Lcvette> i am starting the probing routine at x4 y4 z-2
[13:48:59] <JT[m]1> did you get a g90/91 out of sequence?
[13:49:17] <Lcvette> that is possible
[13:50:57] <Lcvette> ah...
[13:51:04] <Lcvette> think it needed to be in G91
[13:51:11] <Lcvette> good catch
[13:51:12] <Lcvette> thanks
[13:51:32] <Lcvette> ive been staring at these lines for 50 hours now and they are beginning to bleed together
[13:53:20] * JT[m]1 goes to give comfort to Woody, her kitten died
[13:53:31] <Lcvette> oh no!
[13:53:34] <Lcvette> :(
[13:53:50] <Lcvette> just one in the liter?
[13:57:14] <JT-Shop> no she had 4 but 3 were dead when she brought them back
[13:58:26] <Lcvette> oh that is so sad
[13:58:40] <Lcvette> she needs some lovins
[14:08:36] <Lcvette> JT-Shop: that fixed it!!
[14:08:41] <Lcvette> \o/
[14:08:55] <Lcvette> damn lost a G91 in my copy and paste extravaganza escapade late last night
[14:08:57] <Lcvette> lol
[14:19:50] * TurBoss uploaded an image: image.png (111KB) < https://matrix.org >
[14:27:56] <JT[m]1> TurBoss: looking good
[14:28:21] <JT[m]1> need a way to turn off the icons to save space
[14:29:35] <JT[m]1> actually it would fit better on a main page (left one)
[14:30:15] <TurBoss> i can cut lines
[14:30:27] <TurBoss> insert carrier returns
[14:30:31] <TurBoss> too
[14:31:14] <JT[m]1> just put it on the main page as it's much wider
[14:32:14] * JT[m]1 tries to get a few things done outside before the rain starts
[14:40:35] <Not-e6c6> [02qtpyvcp] 07TurBoss commented on issue 03#10: File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/vcp_chooser/vcp_chooser.py", line 82, in get_vcp_data with open(vcp_config_file, 'r') as fh: IOError: [Errno 2] Datei oder Verzeichnis nicht gefunden: '/home/cnc/.local/lib/python2.7/site-packages/video_tests/qtpyvcp_test/config.yml' Shutting down and cleaning up LinuxCNC... -
[14:40:36] <Not-e6c6> 13https://git.io/fjstG
[14:45:59] <TurBoss> like this ?
[14:46:02] * TurBoss uploaded an image: image.png (121KB) < https://matrix.org >
[14:46:37] <TurBoss> where is the glue betwen the error button and the stacks?
[15:01:56] <JT-Shop> mainwindow.py
[15:02:12] <TurBoss> ok
[15:04:23] <TurBoss> I just pushed what I did to my fork
[15:04:34] <TurBoss> is on the notifications widget branch
[15:05:20] <TurBoss> https://github.com
[15:15:49] <JT[m]1> did you figure it out?
[15:19:21] * JT[m]1 goes to the garage to put the BlueWing back together after he finishes taking it apart...
[15:20:38] <Not-e6c6> [02qtpyvcp] 07marfis89 commented on issue 03#10: File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/vcp_chooser/vcp_chooser.py", line 82, in get_vcp_data with open(vcp_config_file, 'r') as fh: IOError: [Errno 2] Datei oder Verzeichnis nicht gefunden: '/home/cnc/.local/lib/python2.7/site-packages/video_tests/qtpyvcp_test/config.yml' Shutting down and cleaning up LinuxCNC... -
[15:20:38] <Not-e6c6> 13https://git.io/fjstF
[15:36:03] <Not-e6c6> [02qtpyvcp] 07TurBoss commented on issue 03#10: File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/vcp_chooser/vcp_chooser.py", line 82, in get_vcp_data with open(vcp_config_file, 'r') as fh: IOError: [Errno 2] Datei oder Verzeichnis nicht gefunden: '/home/cnc/.local/lib/python2.7/site-packages/video_tests/qtpyvcp_test/config.yml' Shutting down and cleaning up LinuxCNC... -
[15:36:03] <Not-e6c6> 13https://git.io/fjsq3
[15:40:21] <Not-e6c6> [02qtpyvcp] 07KurtJacobson commented on issue 03#10: File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/vcp_chooser/vcp_chooser.py", line 82, in get_vcp_data with open(vcp_config_file, 'r') as fh: IOError: [Errno 2] Datei oder Verzeichnis nicht gefunden: '/home/cnc/.local/lib/python2.7/site-packages/video_tests/qtpyvcp_test/config.yml' Shutting down and cleaning up LinuxCNC... -
[15:40:21] <Not-e6c6> 13https://git.io/fjsqZ
[15:58:05] <Not-e6c6> [02qtpyvcp] 07marfis89 commented on issue 03#10: File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/vcp_chooser/vcp_chooser.py", line 82, in get_vcp_data with open(vcp_config_file, 'r') as fh: IOError: [Errno 2] Datei oder Verzeichnis nicht gefunden: '/home/cnc/.local/lib/python2.7/site-packages/video_tests/qtpyvcp_test/config.yml' Shutting down and cleaning up LinuxCNC... -
[15:58:06] <Not-e6c6> 13https://git.io/fjsqP
[16:01:19] <Not-e6c6> [02qtpyvcp] 07TurBoss commented on issue 03#10: File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/vcp_chooser/vcp_chooser.py", line 82, in get_vcp_data with open(vcp_config_file, 'r') as fh: IOError: [Errno 2] Datei oder Verzeichnis nicht gefunden: '/home/cnc/.local/lib/python2.7/site-packages/video_tests/qtpyvcp_test/config.yml' Shutting down and cleaning up LinuxCNC... -
[16:01:19] <Not-e6c6> 13https://git.io/fjsqM
[16:02:05] <Not-e6c6> [02qtpyvcp] 07TurBoss commented on issue 03#10: File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/vcp_chooser/vcp_chooser.py", line 82, in get_vcp_data with open(vcp_config_file, 'r') as fh: IOError: [Errno 2] Datei oder Verzeichnis nicht gefunden: '/home/cnc/.local/lib/python2.7/site-packages/video_tests/qtpyvcp_test/config.yml' Shutting down and cleaning up LinuxCNC... -
[16:02:05] <Not-e6c6> 13https://git.io/fjsq9
[16:03:09] <Not-e6c6> [02qtpyvcp] 07TurBoss edited issue 03#10: vcpchooser fails to load if no vcp is specified in command line arguments - 13https://git.io/fjsID
[16:06:26] * JT[m]1 takes a break from motorcycle maintaince
[16:30:46] * JT[m]1 uploaded an image: VectorImage_2019-04-24_033030.jpg (42KB) < https://matrix.org >
[16:38:47] * Lcvette uploaded an image: Screenshot_2019-04-24_15-37-15.png (95KB) < https://matrix.org >
[16:46:54] -!- JT-Shop has quit [Read error: Connection reset by peer]
[16:46:54] -!- jthornton has quit [Read error: Connection reset by peer]
[16:46:54] -!- JT-Shop2 has quit [Read error: Connection reset by peer]
[16:47:35] -!- jthornton has joined #hazzy
[16:47:46] -!- JT-Shop2 has joined #hazzy
[16:47:50] -!- JT-Shop has joined #hazzy
[16:53:03] <Not-e6c6> [02qtpyvcp] 07marfis89 commented on issue 03#10: vcpchooser fails to load if no vcp is specified in command line arguments - 13https://git.io/fjsmM
[16:53:15] <Not-e6c6> [02qtpyvcp] 07marfis89 edited a comment on issue 03#10: vcpchooser fails to load if no vcp is specified in command line arguments - 13https://git.io/fjsmM
[17:13:11] -!- JT-Shop2 has quit [Read error: Connection reset by peer]
[17:13:40] -!- JT-Shop2 has joined #hazzy
[17:14:09] -!- jthornton has quit [Read error: Connection reset by peer]
[17:14:12] -!- JT-Shop has quit [Read error: Connection reset by peer]
[17:14:34] -!- jthornton has joined #hazzy
[17:15:41] -!- JT-Shop has joined #hazzy
[17:30:54] -!- JT-Shop has quit [Ping timeout: 250 seconds]
[17:31:02] -!- jthornton has quit [Ping timeout: 255 seconds]
[17:31:19] -!- JT-Shop2 has quit [Ping timeout: 276 seconds]
[17:39:21] -!- JT-Shop2 has joined #hazzy
[17:40:13] -!- JT-Shop has joined #hazzy
[17:40:36] -!- jthornton has joined #hazzy
[18:53:24] <Lcvette> \o/
[18:53:47] <TurBoss> hurray!
[18:53:52] <TurBoss> you did it ?
[18:53:53] <Lcvette> hurray!
[18:54:03] <Lcvette> im still doing it!
[18:54:05] <Lcvette> lol
[18:54:20] <Lcvette> im on the 3rd page
[18:54:26] <Lcvette> first two are done
[18:54:39] <Lcvette> the last two pages are more complex
[19:02:17] <JT[m]1> TurBoss: are we ready to merge notifications widget?
[19:02:50] <TurBoss> did nothing more
[19:03:57] <TurBoss> notifications widget is on qtpyvcp master
[19:04:34] <JT[m]1> opps missed that lol
[19:05:03] <TurBoss> have you checked what i tested on mill_touch_v6?
[19:05:19] <TurBoss> *did
[19:05:31] <JT[m]1> can't find what you did...
[19:05:47] <TurBoss> you on kraken?
[19:05:48] <JT[m]1> has the notification widget been added to designer?
[19:05:52] <JT[m]1> aye
[19:05:59] <TurBoss> add my remote
[19:06:08] <TurBoss> i forked mill_touch
[19:06:51] <Lcvette> TurBoss: lcvette fell in love with atom
[19:06:52] <Lcvette> :)
[19:07:04] <Lcvette> installed Gcode package
[19:07:13] <TurBoss> nice!
[19:07:14] <Lcvette> now is much easier to see everything
[19:07:23] <TurBoss> pic pic
[19:07:24] <Lcvette> and it has build in side by side
[19:08:21] * Lcvette uploaded an image: Screenshot_2019-04-24_19-08-04.png (285KB) < https://matrix.org >
[19:08:39] <TurBoss> \o/
[19:08:47] <Lcvette> \o/
[19:08:52] <Lcvette> hurray!
[19:08:58] <Lcvette> lcvette can see things again
[19:09:17] <Lcvette> i wish i could make the brackets a different color so it was easier to see if one was miussing
[19:09:43] <TurBoss> if you click one it marks the other?
[19:10:25] <Lcvette> ?
[19:10:45] <TurBoss> if you click on a bracket
[19:10:58] * Lcvette uploaded an image: Screenshot_2019-04-24_19-10-40.png (12KB) < https://matrix.org >
[19:11:05] <Lcvette> like so?
[19:11:13] <TurBoss> yup
[19:11:20] <TurBoss> it says wich open / closes
[19:11:46] <Lcvette> but not the <>
[19:11:53] <TurBoss> ahhhhh
[19:11:54] <Lcvette> :(
[19:12:28] <Lcvette> you fix?
[19:12:28] <Lcvette> :D
[19:12:40] <Lcvette> package is "G-Code for LinuxCNC"
[19:12:43] <Lcvette> for ATOM
[19:12:49] <TurBoss> cool
[19:12:53] <Lcvette> \o/
[19:15:05] <Lcvette> https://github.com
[19:20:00] <Lcvette> TurBoss: not sure, but can stop compare like meld?
[19:20:07] <Lcvette> Atom*
[19:41:34] <TurBoss> Lcvette:
[19:41:39] <TurBoss> search for diff
[19:41:41] <TurBoss> in atom
[19:56:54] <TurBoss> Lcvette: not posible to mark <> as they could be used as operators
[19:57:17] <Lcvette> ah
[20:02:44] * Lcvette uploaded an image: image.png (36KB) < https://matrix.org >
[20:02:47] <Lcvette> TurBoss: ?
[20:02:57] <TurBoss> :|
[20:03:04] <TurBoss> yes
[20:03:25] <TurBoss> atom:// urls should be open with atom
[20:16:50] <TurBoss> addon works great
[20:30:57] <Lcvette> \o/
[20:31:01] <Lcvette> hurray!!
[20:31:08] <Lcvette> i just added to my windows machine too
[21:04:44] <Not-e6c6> [02qtpyvcp] 07TurBoss created branch 03utilities - 13https://git.io/fhCou
[21:04:46] <Not-e6c6> [02qtpyvcp] 07TurBoss pushed 032 commits to 03utilities [+10/-2/±2] 13https://git.io/fjssw
[21:04:47] <Not-e6c6> [02qtpyvcp] 07TurBoss 03888da58 - add first files
[21:04:49] <Not-e6c6> [02qtpyvcp] 07TurBoss 0385d824f - make them actually widgets
[21:06:51] -!- travis-ci has joined #hazzy
[21:06:52] <travis-ci> kcjengr/qtpyvcp#988 (utilities - 85d824f : TurBoss): The build passed.
[21:06:52] <travis-ci> Diff view : https://github.com^...85d824fca3fc
[21:06:52] <travis-ci> Build details : https://travis-ci.org
[21:06:52] -!- travis-ci has parted #hazzy
[23:29:24] -!- JT-Shop has quit [Remote host closed the connection]
[23:30:26] -!- JT-Shop has joined #hazzy
[23:54:15] <Lcvette> turboss you around?