#hazzy | Logs for 2020-01-19
Back
[11:17:51] -!- logs has joined #hazzy
[11:17:51] -!- mode/#hazzy [+o logs] by ChanServ
[11:20:49] <Lcvette> Ah
[11:20:58] <Lcvette> So you host your own website
[11:21:03] <Lcvette> That's cool
[11:21:56] <Lcvette> hazzy: did you get all my parts about the launcher?
[11:22:10] <Lcvette> <Lcvette "hazzy: did you get all my parts "> Posts*
[11:22:57] <Lcvette> Is turboss here?
[11:48:46] <hazzy-m> I saw them briefly
[11:49:01] <hazzy-m> trying to make a designer launcher?
[11:49:07] <hazzy-m> but why lol
[12:02:05] <Lcvette> because thats how i use them
[12:02:06] <Lcvette> lol
[12:02:38] * Lcvette uploaded an image: Screenshot_2020-01-19_12-02-26.png (33KB) < https://matrix.org >
[12:02:46] <Lcvette> hazzy: ^^^
[12:03:05] <Lcvette> just makes working on them faster
[12:03:16] <Lcvette> as i switch between them all
[12:06:50] <Lcvette> also do you want to look into the VKB stuff some more?
[12:07:36] <Lcvette> i think they were working great except for covering up the entry boxes they popped up for and needing to make a settings checkbox for turning them on or off
[12:11:05] <hazzy-m> whats the problem with the launchers?
[12:21:16] <Lcvette> one works perfect, the other does not
[12:21:57] * Lcvette uploaded an image: Screenshot_2020-01-19_12-21-43.png (42KB) < https://matrix.org >
[12:22:12] <Lcvette> ^^^ this one does not work althought everything appears to be in order
[12:22:38] * Lcvette uploaded an image: Screenshot_2020-01-19_12-22-26.png (40KB) < https://matrix.org >
[12:22:46] <Lcvette> ^^^ this one works fine no issues
[12:23:52] * Lcvette uploaded an image: Screenshot_2020-01-19_12-23-12.png (52KB) < https://matrix.org >
[12:23:54] <Lcvette> this is what i get when i try and run the lathe editvcp probe_basic_lathe from terminal
[12:24:00] <Lcvette> hazzy ^^^
[12:25:47] <Lcvette> also the vkb branch won't run because i think it is too old
[12:25:54] <Lcvette> can we catch it up current?
[12:33:36] * Lcvette uploaded an image: Linear_ATC_Fork_2019-Apr-17_07-33-27PM-000_CustomizedView14592685250.png (88KB) < https://matrix.org >
[13:22:36] * Lcvette uploaded an image: 306e5af3-8040-4a99-a2d8-4bf4913488bf.PNG (80KB) < https://matrix.org >
[13:33:16] * Lcvette uploaded an image: linear_atc_forks_10.png (71KB) < https://matrix.org >
[13:41:32] <TurBoss> hello
[13:41:40] <Lcvette> o/
[13:41:45] <TurBoss> \o
[13:41:45] <Lcvette> turboss is here
[13:42:02] <Lcvette> o/ \o
[13:42:19] <TurBoss> 😁
[13:43:23] <Lcvette> im working on rack mount ATC
[13:44:10] <Lcvette> TurBoss: i have a question on it
[13:44:30] <Lcvette> i think that qml can do linear patterns if my memory serves correctly
[13:44:34] <Lcvette> is that right?
[13:44:53] <TurBoss> hmmmm
[13:45:03] <TurBoss> yes only one image is needed
[13:45:09] <TurBoss> if that what you mean
[13:45:18] <Lcvette> so not sure if a single tool fork image is what will be needed or if multi fork image is the correct type
[13:45:46] <Lcvette> and can configure to have how ever many be linear patterned
[13:47:39] <TurBoss> http://www.qtpyvcp.com \o/
[13:48:30] <Lcvette> \o/
[13:48:39] <Lcvette> its on its own web address!
[13:50:45] <TurBoss> Lcvette: should we finish de rotary atc¡
[13:50:46] <TurBoss> ??
[13:50:58] <Lcvette> yes!
[13:50:59] <Lcvette> :D
[13:51:09] <TurBoss> ok
[13:51:31] <Lcvette> i was just working on this because i don't know what to do to fix the rotary but figured your mind would be current to look at the linear and start formulating a plan for it
[13:51:45] <Lcvette> but i need 20afk
[13:51:50] <Lcvette> ok?
[13:51:55] <TurBoss> ok
[13:52:08] <Lcvette> i need to go get my wife some headache medicine from the pharmacy down the road
[13:52:15] <Lcvette> ok brb asap
[13:52:19] <TurBoss> don't worry
[14:15:06] <Lcvette> back \o/
[14:16:10] <Lcvette> TurBoss: ^^^
[14:16:31] <TurBoss> cool
[14:16:36] <TurBoss> I'm replacing motion pins with debug lines
[14:16:42] <Lcvette> ok
[14:16:56] <TurBoss> shall i copy macros to home
[14:17:08] <TurBoss> https://atillameric.wordpress.com
[14:17:29] * Lcvette uploaded an image: linear_atc_rack_10.png (97KB) < https://matrix.org >
[14:17:45] <Lcvette> commodore
[14:17:49] <Lcvette> \o/
[14:17:49] <TurBoss> in wood
[14:26:01] <TurBoss> hmmm
[14:26:08] <TurBoss> cant run DEBUG EVAL from subs
[14:28:19] <Lcvette> no?
[14:28:31] <Lcvette> i do
[14:28:36] <TurBoss> yes?
[14:28:55] <Lcvette> yes in probing i switched from M68 to debug messeges
[14:29:05] <TurBoss> oh
[14:30:36] * Lcvette uploaded an image: Screenshot_2020-01-19_14-30-05.png (93KB) < https://matrix.org >
[14:30:50] <Lcvette> they work good
[14:31:03] <Lcvette> at leasdt for changing the value in a QLabel or QLineEdit
[14:31:08] <Lcvette> turboss ^^^
[14:31:35] <TurBoss> i see
[14:31:39] <TurBoss> :|
[14:31:50] <Lcvette> i changed them in every single probe routine
[14:31:54] <Lcvette> took me all day
[14:31:55] <Lcvette> lol
[14:32:08] <Lcvette> but they fixed the atc thing
[14:35:13] <TurBoss> ok they work
[14:37:50] <Lcvette> \o/
[14:37:53] <Lcvette> Hurray!!
[14:37:56] <Lcvette> my example helped?
[14:38:01] <Lcvette> :D
[14:38:28] <TurBoss> yup
[14:44:23] * Lcvette uploaded an image: Screenshot_2020-01-19_14-44-01.png (278KB) < https://matrix.org >
[14:51:14] <TurBoss> :o
[15:13:06] -!- Tom_itx has joined #hazzy
[15:13:35] <Lcvette> \o/
[15:13:44] <Lcvette> hows it coming?
[15:14:45] <TurBoss> got something
[15:14:56] <Lcvette> yeah?
[15:14:57] <Lcvette> \o/
[15:16:03] <hazzy-m> Yo
[15:16:08] <TurBoss> hey
[15:16:14] <Lcvette> o/
[15:16:31] <hazzy-m> Looks great Lcvette
[15:16:45] <Lcvette> justy working on the layout
[15:19:15] <Lcvette> thinking i wil add some graphics to represent the tool holder in the fork and the spindle and have some QLineEdits and set buttons to set the clearance above the tools and also set the seated height for the spindle to pickup the tool as well as the xyz position over pocket #1 and a direction for the rack and direction spindle approcahes it from and then in the macros suck that data in to setup the atc pocket positions and
[15:19:15] <Lcvette> movement distances etc
[15:19:28] <Lcvette> and of course center distances between the pockets
[15:19:56] <Lcvette> that way the movement siude of the rack atc m6 remap can be set from the gui interface
[15:20:09] <Lcvette> easily with graphical representation to make it easy to understand what you are putting in
[15:20:12] <Lcvette> thoughts?
[15:23:35] * TurBoss uploaded an image: image.png (120KB) < https://matrix.org >
[15:32:40] <Lcvette> fixed?
[15:32:42] <Lcvette> \o/
[15:35:34] <TurBoss> home is fixed
[15:35:52] <TurBoss> now need store rotate remove etc...
[15:35:53] * TurBoss goes away for a bit
[15:37:26] <Lcvette> k
[15:37:33] <Lcvette> hurray!!
[16:13:23] -!- Tom_itx has quit [Quit: Leaving]
[16:36:43] <hazzy-m> Lcvette: sweet!
[16:37:15] <hazzy-m> I'll have to talk my brother into adding a liner tool rack to his router :)
[16:42:03] <Lcvette> nice
[16:56:11] <TurBoss> hazzy debug messages just drive the atc nicely
[16:56:41] <TurBoss> i can wipe the hal comp from it
[16:56:59] <hazzy-m> Hurray!!
[16:57:04] <hazzy-m> Yes, should be able to
[16:57:19] <TurBoss4184[m]> it is
[17:10:11] <Lcvette> 2 turboss
[17:10:13] <Lcvette> :o
[17:10:53] * Lcvette uploaded an image: image.png (4KB) < https://matrix.org >
[17:11:48] <Lcvette> TurBoss#4184: ^^^
[17:13:22] <TurBoss> yeah
[17:13:23] <TurBoss> xD
[17:13:27] <TurBoss> the one from discord
[17:13:30] <TurBoss> :P
[17:34:15] <Lcvette> lol
[17:34:15] <roguish[m]> Lcvette:quite the artist....
[17:34:20] <Lcvette> are you on dev again?
[17:34:51] <Lcvette> roguish: hahaha... not
[17:34:59] <Lcvette> can't draw a stick man
[17:35:56] -!- Tom_itx has joined #hazzy
[17:43:23] * Lcvette uploaded an image: linear_atc_data_entry.png (23KB) < https://matrix.org >
[17:44:19] <TurBoss> @hazzy
[17:44:38] <TurBoss> oops
[17:44:40] <TurBoss> nothing
[17:48:16] * Lcvette uploaded an image: linear_atc_data_entry.png (32KB) < https://matrix.org >
[18:01:37] * Lcvette uploaded an image: linear_atc_data_entry.png (60KB) < https://matrix.org >
[18:07:13] <hazzy-m> Nice!
[18:11:57] <Not-c468> [02qtpyvcp] 07TurBoss pushed 031 commit to 03eval_atc_messages [+0/-0/±2] 13https://git.io/JvIJA
[18:11:59] <Not-c468> [02qtpyvcp] 07TurBoss 03595b428 - load tools
[18:12:00] <Not-c468> [02qtpyvcp] 07TurBoss created branch 03eval_atc_messages - 13https://git.io/fhCou
[18:13:35] -!- travis-ci has joined #hazzy
[18:13:36] <travis-ci> kcjengr/qtpyvcp#1262 (eval_atc_messages - 595b428 : TurBoss): The build passed.
[18:13:36] <travis-ci> Diff view : https://github.com
[18:13:36] <travis-ci> Build details : https://travis-ci.org
[18:13:36] -!- travis-ci has parted #hazzy
[18:14:39] <Not-c468> [02probe_basic] 07TurBoss pushed 031 commit to 03eval_atc_messages [+0/-1/±4] 13https://git.io/JvIUf
[18:14:41] <Not-c468> [02probe_basic] 07TurBoss 034dee2f8 - macros use eval messages to comunicate with atc widget
[18:14:42] <Not-c468> [02probe_basic] 07TurBoss created branch 03eval_atc_messages - 13https://git.io/JeDwL
[18:15:48] <TurBoss> still WIP
[18:16:25] -!- travis-ci has joined #hazzy
[18:16:26] <travis-ci> kcjengr/probe_basic#229 (eval_atc_messages - 4dee2f8 : TurBoss): The build passed.
[18:16:26] <travis-ci> Diff view : https://github.com
[18:16:26] <travis-ci> Build details : https://travis-ci.org
[18:16:26] -!- travis-ci has parted #hazzy
[18:17:25] <hazzy-m> TurBoss: sweet!
[18:17:40] <Lcvette> TurBoss: alot broken?
[18:17:50] <TurBoss> I have to hook to some other signals...
[18:17:55] <TurBoss> yes much broken
[18:18:10] <Lcvette> /o\
[18:18:15] <Lcvette> lol
[18:18:16] <TurBoss> but could you please take a look at the diff
[18:18:26] <TurBoss> so maybe you find something on macors
[18:18:30] <Lcvette> which diff?
[18:18:52] <TurBoss> https://github.com
[18:19:14] <Lcvette> red is removed?
[18:19:22] <TurBoss> yes
[18:19:23] <Lcvette> green is new?
[18:19:25] <TurBoss> click on split
[18:19:48] <TurBoss> in the top right corner
[18:21:33] <hazzy-m> TurBoss: everything you changed seems to make sense
[18:22:05] <Lcvette> TurBoss: line 20
[18:22:09] <Lcvette> in m13
[18:22:35] <Lcvette> thre was an M64 P14 that told the widget which direction
[18:22:50] <Lcvette> its missing in the new file
[18:23:00] <Lcvette> no debug message takes its place
[18:24:11] <Lcvette> also line 6 there is nothing setting the atc widget unhomed
[18:24:37] <Lcvette> M65 P10 used to do that but nothing replaced it with debug message
[18:25:15] <Lcvette> and line 19
[18:25:49] <Lcvette> not sure how you were trying to set it up but it seems one of those M65/M64 was left off
[18:26:08] <TurBoss> so...
[18:26:18] <TurBoss> xD
[18:26:28] <Lcvette> also the Oword numbering is off
[18:26:48] <Lcvette> you have o120 above o101
[18:28:01] <TurBoss> oops
[18:28:28] <TurBoss> 0130 is fine?
[18:28:34] <TurBoss> * o130 is fine?
[18:29:05] <Lcvette> yes you can count as high as you want, but they must be in ascending order or it will error or not work
[18:31:56] <TurBoss> ok
[18:32:09] <TurBoss> I simplified the home message sequence
[18:32:29] <TurBoss> messages shown
[18:32:33] <TurBoss> XD
[18:32:43] <Lcvette> sweet
[18:34:15] <TurBoss> ```
[18:34:15] <TurBoss> (DEBUG, EVAL[vcp.getWidget{"dynatc"}.atc_message{"REFERENCING"}])
[18:34:26] <TurBoss> ```
[18:34:26] <TurBoss> (DEBUG, EVAL[vcp.getWidget{"dynatc"}.atc_message{}])
[18:35:44] <Not-c468> [02qtpyvcp] 07TurBoss pushed 031 commit to 03eval_atc_messages [+0/-0/±1] 13https://git.io/JvIU4
[18:35:46] <Not-c468> [02qtpyvcp] 07TurBoss 032b5ff95 - simplify atc messages shown in carousel
[18:36:36] <Not-c468> [02probe_basic] 07TurBoss pushed 031 commit to 03eval_atc_messages [+0/-0/±1] 13https://git.io/JvIUR
[18:36:37] <Not-c468> [02probe_basic] 07TurBoss 03e775e7e - fix numbering and fix referencing messages
[18:39:42] <Lcvette> fixed?
[18:39:44] <Lcvette> \o/
[18:40:15] <TurBoss> not yet functional
[18:40:33] <Lcvette> ok
[18:46:53] <TurBoss> it references and draws stored tools
[18:47:24] <TurBoss> but doesnt move in the current direction and one step less when tool requested
[19:02:57] <Lcvette> that is the direction thing i metnioned above
[19:03:25] <TurBoss> but the buttons move in correct direction
[19:03:27] <TurBoss> xD
[19:03:37] * Lcvette uploaded an image: image.png (23KB) < https://matrix.org >
[19:03:52] <Lcvette> M64 P13 set the direction before
[19:03:58] <Lcvette> there is no debug provision for it here
[19:04:15] <TurBoss> yes ut the eval message does it too
[19:04:22] <TurBoss> notice the function name
[19:04:33] <TurBoss> oh
[19:04:35] <TurBoss> fo
[19:04:38] <TurBoss> i see
[19:04:39] <TurBoss> XD
[19:04:42] <Lcvette> then what about M68 E10 Q#
[19:04:43] <Lcvette> ?
[19:04:57] <Lcvette> \o/
[19:05:36] <TurBoss> (tells the atc widget how many steps to move and start moving reverse)
[19:05:36] <TurBoss> (DEBUG, EVAL[vcp.getWidget{"dynatc"}.rotate_fwd{#<Steps_to_move>}])
[19:05:41] <Lcvette> and line 35 looks like something is missing in the new
[19:06:20] <Lcvette> m65 p13 in old and nothing takes its place in new
[19:06:45] * Lcvette uploaded an image: image.png (10KB) < https://matrix.org >
[19:07:10] <TurBoss> yes that sets the direction too
[19:07:25] <TurBoss> P13 and P14
[19:07:45] <Lcvette> but the green side doesn't have anything there
[19:08:12] <TurBoss> yes becouse the debug line is "suposed" to do it
[19:08:18] <TurBoss> 🤔
[19:08:57] <Lcvette> there is no debug line to take the M65 P13 place between the two files
[19:09:18] <Lcvette> same in M12
[19:09:21] <Lcvette> the thing above
[19:09:58] * Lcvette uploaded an image: image.png (29KB) < https://matrix.org >
[19:10:00] <TurBoss> i think there is no need now it setted the direction back to 0
[19:10:10] <Lcvette> ok
[19:10:15] <TurBoss> yea that just restarted the bit
[19:10:25] <TurBoss> once finish
[19:10:32] <Lcvette> ok
[19:11:01] <TurBoss> m13 works fine here
[19:11:08] <TurBoss> I'll push
[19:11:14] * Lcvette uploaded an image: image.png (16KB) < https://matrix.org >
[19:11:22] <Lcvette> this is ok?
[19:11:29] <TurBoss> it has changed
[19:11:37] <TurBoss> I'll show
[19:12:15] <Not-c468> [02qtpyvcp] 07TurBoss pushed 031 commit to 03eval_atc_messages [+0/-0/±1] 13https://git.io/JvIT9
[19:12:16] <Not-c468> [02qtpyvcp] 07TurBoss 03bf33083 - remove redundant functions
[19:14:48] <Not-c468> [02probe_basic] 07TurBoss pushed 031 commit to 03eval_atc_messages [+0/-0/±2] 13https://git.io/JvITd
[19:14:49] <Not-c468> [02probe_basic] 07TurBoss 039cdc10d - functions where renamed
[19:19:14] <Lcvette> can you link the diff view again?
[19:19:23] <Lcvette> for the new one?
[19:19:30] <Lcvette> trying to understand how it is working
[19:19:31] <TurBoss> you can follow on kraken
[19:19:52] <Lcvette> im with a new branch
[19:19:59] <Lcvette> for linear atc
[19:20:04] <Lcvette> i guess i can push it
[19:20:31] <TurBoss> you can use stash
[19:20:37] <TurBoss> but better push
[19:21:16] <Lcvette> i screw stash up
[19:21:45] * Lcvette uploaded an image: linear_atc_data_entry.png (63KB) < https://matrix.org >
[19:22:01] <TurBoss> \o/
[19:24:31] <Lcvette> can you see if i branched correctly before i can't undo
[19:24:39] <TurBoss> how
[19:24:48] <Lcvette> kraken
[19:24:57] <TurBoss> nothing n kraken
[19:25:07] <Lcvette> i did branch before pushing and named it, but its sitting in with master and did not make a new branch thingy
[19:25:15] <Lcvette> under ghpages
[19:25:22] <Lcvette> says +1
[19:25:27] <TurBoss> take a shhot
[19:26:06] * Lcvette uploaded an image: Screenshot_2020-01-19_19-25-56.png (27KB) < https://matrix.org >
[19:26:24] <Lcvette> there is no new brnahc jutting out from the main line
[19:26:39] <Lcvette> * there is no new branchj jutting out from the main line
[19:26:48] <Lcvette> * there is no new branch jutting out from the main line
[19:27:01] <Lcvette> does that mean i did it wrong?
[19:27:46] <TurBoss> maybe.. -.-
[19:27:53] <TurBoss> undo
[19:28:25] <Lcvette> i undo
[19:28:33] <TurBoss> found the changes?
[19:29:22] <Not-c468> [02probe_basic] 07Lcvette pushed 031 commit to 03Linear_ATC_Branch [+4/-0/±2] 13https://git.io/JvIkm
[19:29:24] <Not-c468> [02probe_basic] 07Lcvette 03afac41d - started linear atc branch
[19:29:25] <Not-c468> [02probe_basic] 07Lcvette created branch 03Linear_ATC_Branch - 13https://git.io/JeDwL
[19:29:33] <Lcvette> ok i was in qtpyvcp
[19:29:38] <Lcvette> :o
[19:29:44] <Lcvette> think its correct in master
[19:30:02] <TurBoss> is okish
[19:30:46] -!- travis-ci has joined #hazzy
[19:30:46] <travis-ci> kcjengr/probe_basic#232 (Linear_ATC_Branch - afac41d : Chris): The build passed.
[19:30:46] <travis-ci> Diff view : https://github.com
[19:30:46] <travis-ci> Build details : https://travis-ci.org
[19:30:46] -!- travis-ci has parted #hazzy
[19:31:08] <Lcvette> ok i think i fixed everything
[19:31:19] <TurBoss> \o/
[19:31:27] <Lcvette> removed what i branched in qtpyvcp and did branch in probebasic and it seems correct i think
[19:31:31] <Lcvette> \o/
[19:31:48] <Lcvette> ok checked out the new message branches in qtpyvcp and probe basic
[19:31:50] <Lcvette> what now?
[19:31:59] <TurBoss> okay
[19:32:05] <TurBoss> home and reference the atc
[19:32:09] <TurBoss> until there it works
[19:32:12] <TurBoss> \o/
[19:34:11] <Lcvette> seems to reference and the message shows and changed to referencing, then when done it dissapears
[19:34:13] <Lcvette> \o/\
[19:34:18] <Lcvette> you did it!
[19:34:21] <Lcvette> hurray!
[19:35:10] <Lcvette> what else?
[19:35:31] <TurBoss> the reverse fwd buttons work
[19:35:35] <Lcvette> lol
[19:36:02] <TurBoss> but doesn't show tools begin stored
[19:36:38] <Lcvette> reverse and forward buttons work those are M12 and M11
[19:36:47] <TurBoss> yes
[19:36:54] <TurBoss> but m10 is wrong
[19:36:54] <Lcvette> \o/
[19:36:55] <TurBoss> then
[19:37:01] <Lcvette> so now we need to show tools?
[19:37:14] <Lcvette> need to figure out how to add more messages?
[19:37:21] <Lcvette> or you added and they aren't working?
[19:37:40] <TurBoss> there are 2 things
[19:37:54] <TurBoss> rotate in reverse when store
[19:38:03] <TurBoss> and draw tools begin stored
[19:38:52] <TurBoss> m10 looks good
[20:01:27] * Lcvette uploaded an image: linear_atc_data_entry.png (63KB) < https://matrix.org >
[20:09:33] -!- Tom_itx has quit [Quit: Leaving]
[20:29:07] * Lcvette uploaded an image: Screenshot_2020-01-19_20-28-32.png (218KB) < https://matrix.org >
[20:32:30] -!- Tom_itx has joined #hazzy
[21:46:05] * Lcvette uploaded an image: fork_tool_spindle_2020-Jan-20_02-45-06AM-000_CustomizedView9735822468.png (63KB) < https://matrix.org >
[21:46:55] <TurBoss> wholaala
[21:47:05] <Lcvette> lol
[21:47:15] <TurBoss> you drew it?
[21:47:20] <Lcvette> yes
[21:47:25] <TurBoss> amazing!
[21:47:57] <TurBoss> meanwhle i just did the game of life for megadrive...
[21:47:58] <Lcvette> and rendered
[21:47:58] <TurBoss> :(
[21:48:01] <Lcvette> in fusion360
[21:48:12] <Lcvette> lol
[21:48:17] <Lcvette> was it fun?
[21:48:18] * TurBoss posted a file: rom.bin (128KB) < https://matrix.org >
[21:48:21] <TurBoss> yes
[21:48:22] <TurBoss> xD
[21:48:26] <TurBoss> you can try it
[21:50:05] <TurBoss> http://www.gens.me
[21:51:09] <Lcvette> lcvette wants to knock out this atc thing
[21:51:14] <TurBoss> :)
[21:51:16] <Lcvette> im on a roll
[21:51:24] <Lcvette> plugged in
[21:51:24] <TurBoss> \o/
[21:51:24] <Lcvette> :D
[21:51:25] <Lcvette> \o/
[21:58:31] <TurBoss> https://matrix.org
[22:01:25] <Lcvette> whats that?
[22:01:35] <TurBoss> matrix spam
[22:17:25] * Lcvette uploaded an image: Screenshot_2020-01-19_22-17-12.png (280KB) < https://matrix.org >
[22:39:30] * Lcvette uploaded an image: fork_tool_spindle.png (68KB) < https://matrix.org >
[22:48:37] * Lcvette uploaded an image: Screenshot_2020-01-19_22-48-20.png (265KB) < https://matrix.org >
[22:55:00] * Lcvette uploaded an image: fork_tool_spindle_satin.png (20KB) < https://matrix.org >
[22:55:14] -!- Tom_itx has quit [Quit: Leaving]
[23:00:27] * Lcvette uploaded an image: fork_tool_spindle_satin.png (43KB) < https://matrix.org >
[23:12:09] * Lcvette uploaded an image: Screenshot_2020-01-19_23-11-50.png (257KB) < https://matrix.org >
[23:16:25] -!- Tom_itx has joined #hazzy
[23:18:55] -!- Tom_itx has quit [Client Quit]
[23:49:01] -!- Tom_itx has joined #hazzy
[23:50:42] * Lcvette uploaded an image: fork_tool_spindle_dims.png (60KB) < https://matrix.org >
[23:56:40] -!- Tom_itx has quit [Quit: Leaving]