#linuxcnc | Logs for 2018-07-31
Back
[00:00:40] <hazzy-m> Actualy CrisM started it, and we took it and ran with it :)
[00:00:43] <hazzy-m> It should fit nicly on a 15" screen
[00:00:50] <`Wolf> =)
[00:00:56] <`Wolf> if I ever get the X2 built
[00:00:58] <hazzy-m> I only have an 14" touch screen on my mill :(
[00:01:11] <`Wolf> seeing I decided to hand scrape the whole thing
[00:01:28] <hazzy-m> wait, mine is smaller than that, lol
[00:01:42] <hazzy-m> haha, eventualy
[00:01:58] <hazzy-m> you will most certainly finish before the GUI is ready, lol
[00:02:11] <`Wolf> gotta practice on something when that book gets here lol
[00:02:21] <hazzy-m> Yes!
[00:02:30] <`Wolf> X2 = semi expendable
[00:02:43] <`Wolf> and badly built
[00:02:46] <`Wolf> lol
[00:03:34] -!- nallar has joined #linuxcnc
[00:04:04] -!- Ross has quit [Ping timeout: 260 seconds]
[00:04:04] nallar is now known as Ross
[00:04:37] <`Wolf> I think my one surface plate is at least A grade so I should be good to go, still need to find a long straight edge to use for the table and column (and the surface grinder)
[00:05:48] -!- veek_ has joined #linuxcnc
[00:06:34] <`Wolf> waiting to learn what I actually need first though
[00:06:40] <hazzy-m> do you have a camle back straight edge for getting into the doevtais?
[00:06:49] <`Wolf> nothing yet
[00:07:09] * hazzy-m needs spellcheck, lol
[00:07:11] <`Wolf> I need to measure the surface grinder ways to see how long I need
[00:07:13] <hazzy-m> ok
[00:07:37] <`Wolf> and to see what the angle is on the V way
[00:07:56] <hazzy-m> Sombody was selling raw castings for them, they idea being you would learn to scrap makign the tools you need to scrape
[00:08:01] -!- rebecca has quit [Ping timeout: 248 seconds]
[00:08:03] <`Wolf> the X2 I dont think I can mess it up any worse then how they come lol
[00:09:00] <hazzy-m> lol, you'd have to realy try, looks like they scrape them with an angle grinder and a 36grit disk
[00:09:05] -!- veek has quit [Ping timeout: 248 seconds]
[00:09:05] -!- PanicSkittle has quit [Ping timeout: 248 seconds]
[00:09:26] <`Wolf> fly cut with a clapped out china mill
[00:09:37] -!- SadMan has quit [Ping timeout: 248 seconds]
[00:10:02] -!- infornography has quit [Quit: Leaving]
[00:11:01] -!- ve7it has quit [Remote host closed the connection]
[00:11:18] <Lcvette[m]> I didn't know this was Chris Morley's baby
[00:11:26] <Lcvette[m]> I didn't know this was Chris Morley's baby
[00:11:27] <hazzy-m> seeing pics of where they make those things is reveiling, the equpment is not much bitter or better quality, it is impressive how well they do
[00:11:47] <`Wolf> true lol
[00:12:40] <`Wolf> granted you really can’t expect all that much at the price point they sell them at
[00:13:11] -!- PanicSkittle has joined #linuxcnc
[00:13:19] <`Wolf> the vise on my bigger mill cost more then the whole X2 mill did
[00:13:19] <hazzy-m> Lcvette: yes, I'd like to give back at least some of the changes, but it is going to be hard, as my aproach is very diffrent than his
[00:15:06] <hazzy-m> yeah, that is true, lol
[00:15:27] -!- flyback has quit [Ping timeout: 240 seconds]
[00:16:02] -!- flyback has joined #linuxcnc
[00:16:04] <`Wolf> https://i.imgur.com not even a kurt…
[00:17:29] <hazzy-m> Good thing, if it was a Kurt you'd have to send it to me ...
[00:17:30] <hazzy-m> :D
[00:17:44] <hazzy-m> (hazzy's name is Kurt)
[00:17:48] <`Wolf> lol
[00:17:59] <hazzy-m> The CMT's are good
[00:18:13] <`Wolf> GMT
[00:18:17] <`Wolf> =)
[00:18:37] <hazzy-m> :]
[00:19:37] <`Wolf> 6” is a bit overkill on the mid sized knee mill I think, but working area of it helps I think
[00:20:53] -!- rebecca has joined #linuxcnc
[00:20:58] <hazzy-m> as long as it fits and does not restrict y (and maybe z) too much, then its not too big!
[00:21:22] <`Wolf> sticks over the Y DRO scale by 1/2”
[00:21:34] <hazzy-m> is that a 6" x 26" or an 8" x 32" ?
[00:22:06] -!- SadMan has joined #linuxcnc
[00:22:34] <hazzy-m> Do you bolt it down to the back T-slot?
[00:22:34] <`Wolf> 7.5”x19 5/8”
[00:23:02] <`Wolf> using the center through bolt holes and keys with it
[00:23:39] <`Wolf> 7.5”x19 5/8” travels 9”x30” table
[00:24:15] <hazzy-m> ok
[00:24:39] <hazzy-m> That's big enough for a lot of work
[00:25:15] <`Wolf> the slots on my table dont line up with the 6” vise spacing so I could off set it depending on which way I bolt it down
[00:26:21] <hazzy-m> I have a full size BP, (12" knee and 48" table) it's too big for my space, what you have would be ideal
[00:27:14] <`Wolf> this thing is a odd one, knee has 13.75” travel
[00:28:25] <`Wolf> https://i.imgur.com
[00:28:47] <`Wolf> only part I dont really like is the gearbox X powered
[00:28:51] <`Wolf> feed
[00:29:14] <hazzy-m> Oh, you have the power feed!!!
[00:29:21] <hazzy-m> haha
[00:29:24] <hazzy-m> WHy don't you like it?
[00:30:12] <`Wolf> its attached to the knee, fixed 6 speed gear box,
[00:30:33] <`Wolf> and its 3phase so it only works when the spindle is running
[00:30:56] <`Wolf> due to static phase converter
[00:30:58] <hazzy-m> Ah, that is frusterating
[00:31:34] <`Wolf> the newer ones that mount to the handles are kinda nice IMO
[00:32:01] -!- Dave_Elec has quit [Ping timeout: 248 seconds]
[00:32:23] <hazzy-m> Yeah, and so much less complex
[00:32:42] <`Wolf> and dont drool oil all the time
[00:32:46] <hazzy-m> I guess that drives the X thru a key way in the screw?
[00:32:53] <`Wolf> yup
[00:33:06] <`Wolf> which makes taking the table off a total pain in the ass
[00:33:14] <hazzy-m> I bet
[00:34:31] <`Wolf> I really want to take the motor off the head and change it over to a servo motor drive
[00:35:10] <`Wolf> 1hp step pulley setup right now
[00:37:01] -!- HighInBC has quit [Remote host closed the connection]
[00:37:46] <`Wolf> also no reverse or brake
[00:37:51] <`Wolf> right now
[00:38:44] -!- pingufan has joined #linuxcnc
[00:39:22] <hazzy-m> http://dealerselectric.com
[00:39:38] <hazzy-m> http://dealerselectric.com
[00:39:43] <hazzy-m> sorry for the long link
[00:40:15] <hazzy-m> I just got that motor for my mill
[00:41:24] <`Wolf> lol love the Our price vs retail price on it
[00:41:49] <hazzy-m> It is designed to replace DC servos, so has ver wide speed range and full torque at almost 0 rpm
[00:41:55] <hazzy-m> LOL
[00:43:14] <`Wolf> nice and has drawing
[00:43:45] <Lcvette[m]> Retail in that motor is alot higher
[00:44:05] <`Wolf> If I VFD this thing, that means I’ll need to either set up a 1HP rotary converter for the power feed or convert the power feed
[00:44:28] <hazzy-m> VFD on the power feed too!
[00:44:49] <hazzy-m> it coulc be a realy small one, that is probably only 1/4hp, right?
[00:46:27] <`Wolf> looks like it, can’t read the HP stamp but its 0.8KW
[00:46:42] -!- h_maximilian has joined #linuxcnc
[00:46:43] -!- h_maximilian has quit [Client Quit]
[00:46:49] <`Wolf> err 0.18KW
[00:49:43] -!- Contract_Pilot has quit [Read error: Connection reset by peer]
[00:50:06] -!- Contract_Pilot has joined #linuxcnc
[00:53:05] -!- HighInBC has joined #linuxcnc
[00:53:25] <`Wolf> weird just noticed the drawing doesn’t match the motor on that page
[00:56:34] -!- veek_ has quit [Quit: Leaving]
[01:00:40] -!- ziper has quit [Read error: Connection reset by peer]
[01:00:45] -!- PanicSkittle has quit [Changing host]
[01:00:46] -!- PanicSkittle has joined #linuxcnc
[01:02:27] -!- c-log has quit [Ping timeout: 240 seconds]
[01:05:01] <hazzy-m> oops, what does not match?
[01:05:09] -!- c-log has joined #linuxcnc
[01:05:32] <`Wolf> nm, just confusing dimension table
[01:05:54] <hazzy-m> it is kinda a mess
[01:06:10] <hazzy-m> maybe redrawn one to many times? lol
[01:06:16] <`Wolf> that is a good price
[01:06:30] <hazzy-m> it, very
[01:06:34] <hazzy-m> it is*
[01:06:58] <`Wolf> yeah, has 140T in every frame slot in the dimension table lol
[01:07:20] <hazzy-m> I noticed that, xD
[01:07:39] <`Wolf> 956 is the right dimensions I think
[01:09:38] <`Wolf> would be almost worth getting 2 of them and repower my lathe as well…
[01:10:19] <hazzy-m> I was thinking the same, lol
[01:10:23] <hazzy-m> they are selling out quick
[01:10:37] <hazzy-m> there are enough for both of us :D
[01:10:40] <`Wolf> my lathe the prior owner stuck a 0.5hp 110 motor on
[01:11:08] <`Wolf> I put a 1hp 220 farm rated motor that I had laying around on it
[01:11:49] <hazzy-m> that more like it, lol
[01:12:08] <`Wolf> original spec was 1.5hp 3phase
[01:13:48] <hazzy-m> perfect!
[01:15:26] <`Wolf> damn, almost close enough to avoid shipping =/
[01:15:35] <`Wolf> 3hr drive
[01:16:12] <hazzy-m> That might be almost worth it, shipping was $54
[01:16:40] <`Wolf> $89 for 2
[01:17:13] <hazzy-m> yes, might as well get three for what you save on shipping, lol
[01:17:22] <`Wolf> lol
[01:17:56] <`Wolf> long drive tho
[01:18:16] <`Wolf> almost all of new jersey
[01:18:59] <`Wolf> 6hrs and $40 in fuel
[01:19:29] <hazzy-m> your hourly rate would be pretty low to pick them up ...
[01:19:43] <hazzy-m> and it you drive the truck it might be negative, lol
[01:20:00] <hazzy-m> oh, you have a ranger?
[01:20:01] <`Wolf> thats figuring taking the VW w/ 40mpg
[01:20:27] <`Wolf> my ranger isn’t tagged
[01:20:41] <`Wolf> and forget driving that thing for 6hrs lol
[01:20:42] <hazzy-m> oh, then thats pretty cheap on gas, still not realy worth it
[01:21:02] <hazzy-m> haha
[01:21:08] <hazzy-m> What year it is?
[01:21:32] <hazzy-m> We have an 03, its a peice of junk, lol
[01:21:39] <`Wolf> 2000, 4 cyl 5 speed 2wd with manual everything and broke AC
[01:22:19] <hazzy-m> sounds about like ours ...
[01:22:33] <hazzy-m> needed a the top end rebuilt at 37k, lol
[01:22:52] <`Wolf> I miss having it to use about once every 2 months… then I remember how much it sucks to drive
[01:23:28] <`Wolf> then I hook the 4x6’ trailer to the VW lol
[01:23:56] <`Wolf> 90% of the time my big truck is overkill
[01:24:20] <hazzy-m> I have a friend to tows cars with his VW, it does surprizingly well, but looks silly, lol
[01:25:13] <`Wolf> if I had a manual trans in the VW it wouldn’t be as bad, but DSG and I dont think the north america spec cars have a tow mode
[01:25:30] <`Wolf> I try not to tow with it often
[01:26:44] <`Wolf> my F550 was getting 10MPG up and back to get the surface grinder and the other auction lots
[01:27:27] -!- Akex_ has quit [Ping timeout: 240 seconds]
[01:28:17] <hazzy-m> That is not bad
[01:28:18] -!- Akex_ has joined #linuxcnc
[01:28:46] <hazzy-m> is that diesel?
[01:29:25] <`Wolf> with 4 foot of wind damn over the cab, and 4,000 lbs (guess) in the truck on the way back, not bad at all, yeah 6.7 diesel
[01:30:34] <`Wolf> VW and the ford f550 are diesel lol
[01:30:57] <hazzy-m> Nice!
[01:31:21] <`Wolf> I think there is something wrong with the DPF system in the truck tho, was doing a regen every 50 miles
[01:31:49] <`Wolf> which might be part of the reason the MPG sucks so bad
[01:32:18] <`Wolf> damn emissions systems
[01:32:22] <hazzy-m> Yeah, but no smoke no poke
[01:32:24] <hazzy-m> :D
[01:32:51] <`Wolf> it at one point was getting around 15mpg
[01:33:46] <hazzy-m> That is very good!
[01:34:19] <`Wolf> hmm, screw it, ordering 2 of those motors lol
[01:34:35] <hazzy-m> hehe
[01:34:51] <hazzy-m> Can't go wrong at that price
[01:34:58] <hazzy-m> maybe ask to pay the "retail" price? lol
[01:35:30] <`Wolf> my 1099 job comes up in september and october so I’ll write these off on there lol
[01:35:56] <hazzy-m> perfect!
[01:42:39] <`Wolf> perfect, PayPal credit 6mo/0% lol ordered and I’ll pay it all off mid september lol
[01:42:46] <hazzy-m> Qty. in stock is down to 1
[01:42:47] <hazzy-m> lol
[01:43:04] <hazzy-m> sweet!
[01:43:27] -!- IchGucksLive has joined #linuxcnc
[01:43:43] <IchGucksLive> morning from germany
[01:43:47] <hazzy-m> ok, guess I should sleep
[01:43:48] <hazzy-m> gn8
[01:44:15] <Lcvette[m]> Night!
[01:44:32] <`Wolf> later
[01:45:03] <`Wolf> great, now I need 2 more VFD lol
[01:47:14] <IchGucksLive> take the new ones from hyanyang awaysome better
[01:47:42] <IchGucksLive> im off 2 garden
[01:47:48] -!- IchGucksLive has quit [Client Quit]
[01:54:14] -!- miss0r has joined #linuxcnc
[01:56:06] <miss0r> Apparently we had a poweroutage last night. This resulted in my dehumidifier(which was taken partially apart for cleaning) started by itself when the power came back. I have a pretty decent amount of water on my shop floor at the moment...
[01:57:10] <`Wolf> doh
[01:58:19] <miss0r> yeah
[02:01:58] <`Wolf> thanks to hazzy-m I just ordered new motors for my mill and lathe… now I need to pick VFDs for them
[02:04:20] <miss0r> :] Sounds like fun
[02:08:02] <`Wolf> oh yeah
[02:08:21] <`Wolf> lathe is simple, mill is going to be fun
[02:10:02] <miss0r> why the new motors?
[02:11:26] <`Wolf> lathe came with wrong motor, single phase 110, I have single phase 220 on it now, ordered 2x http://dealerselectric.com
[02:11:50] <`Wolf> mill has belt drive 2 speed 1hp on it right now
[02:14:34] <`Wolf> planning on ditching the step pulleys on the mill for VFD, new motor is spec for VFD use
[02:17:29] <`Wolf> and good price on motors =)
[02:20:23] <`Wolf> now back to figuring out how I’m going to do the oiling system on the mini mill cnc
[02:21:30] <`Wolf> wonder if I should just thread the tubing right in to holes like a BP mill
[02:26:15] -!- syyl has joined #linuxcnc
[02:34:38] -!- miss0r2 has joined #linuxcnc
[02:35:45] -!- miss0r has quit [Ping timeout: 248 seconds]
[02:44:48] -!- flyback has quit [Excess Flood]
[02:45:06] -!- flyback has joined #linuxcnc
[02:49:17] -!- Deejay has joined #linuxcnc
[02:49:32] <Deejay> moin
[03:07:08] -!- selroc has joined #linuxcnc
[03:07:34] <selroc> log
[03:07:34] <c-log> selroc: Today's Log http://tom-itx.no-ip.biz:81
[03:12:50] -!- selroc has quit [Quit: Leaving]
[03:29:11] -!- agris has joined #linuxcnc
[03:55:09] -!- asdfasd has joined #linuxcnc
[03:57:32] -!- Ralith_ has quit [Ping timeout: 256 seconds]
[03:58:04] -!- Ralith_ has joined #linuxcnc
[04:16:21] -!- asdfasd1 has joined #linuxcnc
[04:20:54] -!- asdfasd has quit [Ping timeout: 256 seconds]
[04:52:08] -!- Dave_Elec has joined #linuxcnc
[05:04:40] -!- Dave_Elec has quit [Ping timeout: 268 seconds]
[05:04:49] -!- Dave_Elec has joined #linuxcnc
[05:22:24] <XXCoder> yahboo
[05:28:15] -!- Dave_Elec has quit [Quit: No Ping reply in 180 seconds.]
[05:29:31] -!- Dave_Elec has joined #linuxcnc
[05:35:29] -!- phiscribe has joined #linuxcnc
[05:38:24] -!- phiscribe_ has quit [Ping timeout: 256 seconds]
[05:47:25] -!- orr has joined #linuxcnc
[05:56:48] -!- tumdedum has quit [Ping timeout: 265 seconds]
[05:57:12] -!- tumdedum has joined #linuxcnc
[05:58:18] -!- pingufan has quit [Quit: Konversation terminated!]
[06:03:56] -!- JT-Shop has joined #linuxcnc
[06:04:25] -!- selroc has joined #linuxcnc
[06:05:05] -!- selroc has quit [Client Quit]
[06:06:38] -!- jthornton has joined #linuxcnc
[06:09:08] -!- tumdedum has quit [Ping timeout: 244 seconds]
[06:10:13] -!- tumdedum has joined #linuxcnc
[06:22:29] <jthornton> morning
[06:23:11] <XXCoder> yo
[06:23:41] <Deejay> hey
[06:27:57] -!- Simonious has quit [Ping timeout: 240 seconds]
[06:29:22] -!- orr has quit [Read error: Connection reset by peer]
[06:29:34] -!- Simonious has joined #linuxcnc
[06:30:03] -!- orr has joined #linuxcnc
[06:34:17] -!- Dave_Elec has quit [Remote host closed the connection]
[06:34:54] <Tom_L> morning
[06:41:59] <Deejay> afternoon
[06:43:14] <XXCoder> today is end of hot days. yay
[06:43:25] <XXCoder> tues was supposed to be 87, but now its 80f
[06:44:06] <jthornton> wow todays high is only 81°F
[06:44:19] <XXCoder> it reached 89f here
[06:44:28] <XXCoder> shop interior anyway
[06:44:33] <XXCoder> outside was 95f I think
[06:44:42] <XXCoder> surpising, normally inside is hotter
[06:50:31] -!- phiscribe_ has joined #linuxcnc
[06:50:42] <jthornton> we finally got a bit of rain last night it was so dry the leaves on the trees were drooping
[06:51:17] <XXCoder> heh its been months since last rain here
[06:51:32] <XXCoder> I think it will happen in 2 days. which means 100 cars will be sent to junkyard
[06:51:33] <jdh> minutes here
[06:52:26] <XXCoder> damned calfornia ex-pats dont know how to drive in washington rain lol
[06:53:23] <XXCoder> kidding lol honestly I dont know why so many drivers dont know how to drive in raind
[06:53:38] -!- phiscribe has quit [Ping timeout: 260 seconds]
[06:53:46] <XXCoder> and this is ever-washing-ton state
[07:06:50] -!- syyl has quit [Quit: Leaving]
[07:12:23] varesa_ is now known as varesa|
[07:13:41] <orr> we have 93.2 °Fahrenheit
[07:19:44] <Tom_L> 63F Hi 84
[07:29:41] <skunkworks> it has been beautiful around here the last few days
[07:33:09] -!- orr has quit [Remote host closed the connection]
[07:38:24] -!- Beachbumpete1 has joined #linuxcnc
[07:47:02] <Beachbumpete1> Morning LinuxCNC anyone working on anything interesting? ;)
[07:49:24] <Beachbumpete1> I am trying to use our new scanner to scan a cylinder head for a friend. its a bit challenging so far
[07:49:37] <skunkworks> sharpening some planer blades.. http://electronicsam.com
[07:50:43] <Beachbumpete1> Nice... that looks like a beast of a surface grinder ;)
[07:51:24] <skunkworks> it is nice. all hydraulic
[07:52:06] <Beachbumpete1> https://imgur.com
[07:52:40] <skunkworks> point cloud!
[07:52:43] <Beachbumpete1> That's my point cloud so far
[07:53:02] <Beachbumpete1> I sent it in to autodesk to have a mesh created from it last night.
[07:53:12] <Beachbumpete1> we will see how that looks when it comes back
[07:57:30] <Beachbumpete1> it LOOKS fairly dense but we shall see
[08:10:39] -!- Beachbumpete1_ has joined #linuxcnc
[08:12:45] -!- Beachbumpete1 has quit [Ping timeout: 245 seconds]
[08:12:59] -!- Beachbumpete1_ has quit [Client Quit]
[09:14:37] -!- mozmck has joined #linuxcnc
[09:17:13] -!- Beachbumpete1 has joined #linuxcnc
[09:27:35] -!- Loetmichel_ has joined #linuxcnc
[09:29:44] -!- Loetmichel has quit [Ping timeout: 256 seconds]
[09:38:15] <robotustra> fkn UPS charge 60$ for tax impot on mesa
[09:48:37] <jthornton> should have bought from me and used USPS
[09:49:14] -!- mozmck has quit [Ping timeout: 244 seconds]
[09:49:28] <robotustra> usps charge even more for delivery
[09:50:07] <gregcnc> isn't it your .gov who charges the duty?
[09:51:26] <robotustra> no, gov charge 13$ only
[09:51:31] <jthornton> I've always seen UPS to much higher than USPS for delivery
[09:51:40] <robotustra> and 66 bux take ups
[09:53:05] -!- Timbo has quit [Ping timeout: 256 seconds]
[09:53:29] <gregcnc> 66usd total for shipping?
[09:53:47] -!- ziper has joined #linuxcnc
[09:54:01] <jthornton> robotustra: what country are you in?
[09:54:24] <Beachbumpete1> shipping rates are out of control lately
[09:54:35] * jthornton has 2.8 GB of data to use today
[09:55:42] <robotustra> canada
[09:56:20] <jthornton> USPS shipping to canada first class is like < $15
[09:57:30] <gregcnc> customs brokerage fee, was that unexpected when using UPS/fedex?
[09:57:32] <gregcnc> https://www.ups.com
[09:58:51] -!- Roguish has joined #linuxcnc
[10:05:50] <pcw_home> UPS to Canada is almost always a mistake, USPS and Fedex are cheaper
[10:06:01] <robotustra> when canada annex USA it will be no custom fee any more
[10:06:31] <gregcnc> lol?
[10:06:40] -!- mozmck has joined #linuxcnc
[10:07:13] <robotustra> kind of
[10:07:43] <robotustra> one day us and canada should join
[10:12:02] <robotustra> it's inevitable like Earth rotation
[10:12:20] <robotustra> it might happen diring our life
[10:12:50] <robotustra> let's say around 2050
[10:20:34] <Beachbumpete1> You must be kidding
[10:22:11] <hazzy-m> LOL
[10:22:51] <robotustra> :)
[10:22:57] <robotustra> of cause not
[10:30:26] <hazzy-m> robotustra: In 1775 we learned (the hard way) that the Canadians would never be part of the US :)
[10:30:27] -!- phiscribe has joined #linuxcnc
[10:31:54] <robotustra> but you didn't learn the opposite :)
[10:32:29] <pcw_home> Ha my Grandmother wanted to join the DAR until she found out the her forbears ran away to Canada during the revolution...
[10:32:58] <gregcnc> super soakers loaded with maple syrup?
[10:33:05] -!- phiscribe_ has quit [Ping timeout: 248 seconds]
[10:34:37] <robotustra> I would join US to avoid stupid custom taxes
[10:36:21] -!- phiscribe has quit [Ping timeout: 264 seconds]
[10:36:22] -!- phiscribe_ has joined #linuxcnc
[10:39:27] -!- R2E4 has quit [Read error: Connection reset by peer]
[10:41:44] <Roguish> I'm going to emigrate to the State of Jefferson (Northern California) ......
[10:42:31] <jdh> I'm going to hang out here until sanity resumes
[10:42:41] <roycroft> where there are a half dozen huge fires burning right now
[10:43:06] * roycroft lives just north of jefferson
[10:43:09] <robotustra> I'm going to move Austin
[10:43:16] <Roguish> r u up there roycroft?
[10:43:20] <roycroft> i'm in eugene
[10:43:21] <robotustra> or SanDiego
[10:43:26] <Roguish> where abouts?
[10:43:38] <roycroft> jefferson starts in douglas county
[10:43:40] <Roguish> San Diego is boring. grew up there.
[10:44:06] <Roguish> capital in Yreka?
[10:44:12] <roycroft> as soon as you hit jefferson the only sounds on the radio are rush and jebus
[10:44:17] <robotustra> Boring is OK for me, I can do fun on my own
[10:44:30] <roycroft> i've been to boring, oregon a number of times
[10:44:34] <roycroft> it's not a remarkable town
[10:44:53] <roycroft> but it's near enough to the coast that one can easily escape to find fun things to do
[10:45:21] <Roguish> do you know NorCal company?
[10:46:04] <roycroft> boring, oregon has a sister city in the uk - dull, scotland
[10:46:15] <roycroft> i'm familiar with norcal brewing
[10:46:45] <roycroft> if they still exist
[10:46:59] <roycroft> the entire city of redding is in jeopardy of burning down
[10:47:06] <Roguish> https://www.n-c.com
[10:48:06] <roycroft> i'm not familiar with that norcal
[10:48:24] <roycroft> i'm fairly familiar with yreka
[10:48:44] <roycroft> not that there's much to be familiar with
[10:48:47] <roycroft> ti's a small town
[10:48:48] <Roguish> very good in vacuum equipment
[10:48:58] <roycroft> a bunch of hotels, a few crappy restaurants, and pot farms
[10:49:12] <Roguish> I like Ashland.
[10:49:22] <roycroft> my boss grew up in ashland
[10:49:36] <roycroft> ashland is the austin of jefferson :)
[10:49:44] <Roguish> lololol
[10:50:13] <roycroft> my boss, however, is a jeffersonian through and through
[10:50:16] <Roguish> live in Ashland and compute to Yreka to work at NorCal
[10:50:28] <roycroft> that's quite the commute
[10:50:31] <roycroft> especially in the winter
[10:50:47] <roycroft> siskiyou summit is nothing to laugh at when it's snowy
[10:50:52] <Roguish> compared to compute here in the Bay Area, it's cake.
[10:51:06] <roycroft> sometimes i5 is closed for days at a time at the summit
[10:51:39] <Roguish> I really like Mt Ashland. my level of skiing.
[10:51:47] <roycroft> i've never been there
[10:52:03] <Roguish> https://www.mtashland.com
[10:52:05] <roycroft> i've never even been to any plays in ashland
[10:52:12] <roycroft> i've just never gotten around to it
[10:52:32] <Roguish> the plays are quite well done. very professional.
[10:55:43] <roycroft> yes, and i really would like to go some time
[10:56:19] <roycroft> i used to commute to medford part time
[10:56:21] -!- HSD has joined #linuxcnc
[10:56:24] <roycroft> it's a very long commute
[10:56:31] <roycroft> and in the summer, very very hot
[11:13:52] -!- likevinyl has quit [Ping timeout: 256 seconds]
[11:22:57] <JT-Shop> hazzy-dev: https://github.com
[11:23:46] <hazzy-m> its on github, hurray!
[11:23:54] * hazzy-m checkis it out
[11:25:46] -!- likevinyl has joined #linuxcnc
[11:26:06] likevinyl is now known as Guest12994
[11:28:30] <JT-Shop> yea, looks like I might just finish this project so time to put it on github
[11:29:45] <hazzy-m> I like to toolbar
[11:29:45] <hazzy-m> the*
[11:31:25] <JT-Shop> I like how I populate the combo boxes :)
[11:31:54] <hazzy-m> no
[11:31:59] <hazzy-m> No, it is good, but bad to use eval
[11:32:36] <hazzy-m> I'll open a PR with changes to use getattr
[11:35:50] <JT-Shop> ok
[11:37:05] <hazzy-m> eval is evil :)
[11:38:23] <JT-Shop> hazzy-dev: what is your github username?
[11:40:29] <hazzy-m> https://github.com
[11:40:52] <hazzy-m> KurtJacobson
[11:42:13] -!- P1ersson has joined #linuxcnc
[11:43:34] <JT-Shop> sent you an invite
[11:45:10] <hazzy-m> JT-Shop: Thanks!
[11:46:40] -!- phiscribe has joined #linuxcnc
[11:49:34] -!- phiscribe_ has quit [Ping timeout: 264 seconds]
[11:57:46] <JT-Shop> I can't find a merge button :(
[11:58:36] -!- ferdna has joined #linuxcnc
[11:59:12] <hazzy-m> https://i.imgur.com
[11:59:44] <hazzy-m> You should have that big green button
[12:00:21] <hazzy-m> Maybe you are not logged in?
[12:01:04] <JT-Shop> I had it open in another window lol
[12:02:20] <JT-Shop> ok I got it :)
[12:02:25] <JT-Shop> lunch time here
[12:02:43] <hazzy-m> thanks!
[12:02:43] <hazzy-m> cu
[12:09:17] -!- P1ersson has quit [Ping timeout: 256 seconds]
[12:24:58] -!- phiscribe has quit [Ping timeout: 264 seconds]
[12:30:32] -!- phiscribe has joined #linuxcnc
[12:32:07] -!- Contract_Pilot has quit [Quit: Leaving]
[12:33:32] -!- phiscribe_ has joined #linuxcnc
[12:34:23] -!- FAalbers has joined #linuxcnc
[12:35:13] -!- phiscribe has quit [Ping timeout: 248 seconds]
[12:39:31] * jthornton sees that the lunch minute is over so back to work
[12:40:33] -!- candyonetoo has quit [Ping timeout: 264 seconds]
[12:57:57] -!- IchGucksLive has joined #linuxcnc
[12:58:41] <IchGucksLive> hi all
[13:02:00] * JT-Shop has one table cleaned off now to catch up last months paperwork
[13:05:26] <IchGucksLive> im off folks big BBq here on lakeside
[13:05:30] -!- IchGucksLive has quit [Quit: Leaving]
[14:06:22] -!- P1ersson has joined #linuxcnc
[14:08:05] -!- Ralith_ has quit [Ping timeout: 244 seconds]
[14:08:47] -!- Guest12994 has quit [Quit: WeeChat 1.4]
[14:10:09] -!- Ralith_ has joined #linuxcnc
[14:10:53] -!- candyonetoo has joined #linuxcnc
[14:13:57] -!- hazzy-lab has joined #linuxcnc
[14:29:15] -!- hazzy-lab has quit [Quit: hazzy-lab]
[14:45:34] -!- Akex_ has quit [Ping timeout: 268 seconds]
[14:46:36] -!- Akex_ has joined #linuxcnc
[15:13:31] -!- ve7it has joined #linuxcnc
[15:29:59] -!- HighInBC has quit [Ping timeout: 276 seconds]
[15:31:22] -!- HighInBC has joined #linuxcnc
[15:33:50] -!- grotius has joined #linuxcnc
[15:35:01] <grotius> I want to order my first mesa
[15:35:15] <XXCoder> JT-Shop:
[15:35:52] <grotius> is he online?
[15:36:24] <XXCoder> really depends. he tend to be on and off during day. he tend to get on for sure in 14 hours though
[15:36:43] <XXCoder> 2 am local time. its now 12 pm
[15:37:20] <grotius> HHmm. okey. i must have the perfect mesa setup to make the best plasma machine of the world.
[15:38:52] <grotius> Is Jt shop the only one?
[15:39:11] <XXCoder> only one I know of. I'm sure there is more
[15:39:32] <grotius> But the core of mesa, is that the JT shop?
[15:39:39] <XXCoder> no
[15:39:55] <XXCoder> MESA is company on its own. there is lots of resellers. not sure if MESA directly sells
[15:40:07] <grotius> Yes to me, they will sel
[15:40:20] <hazzy-m> grotius, there is euserplus in the EU, they also sell mesa cards, but JT is the main one
[15:40:40] <XXCoder> hazzy-m: jt owns MESA?
[15:40:41] <grotius> Surplus i know off. They lost many cards last year.
[15:40:44] <XXCoder> or top reseller?
[15:41:12] <hazzy-m> XXCoder No
[15:41:39] <mozmck> you can buy direct from mesa here: http://store.mesanet.com
[15:41:50] <hazzy-m> You can buy direct from mesa: http://www.mesanet.com
[15:42:11] <hazzy-m> But JT shop ships much faster
[15:42:14] <mozmck> pcw_mesa owns it
[15:42:26] <grotius> Is the mesa company following the forum?
[15:42:28] <hazzy-m> mozmck You beat me :)
[15:42:36] <XXCoder> nice
[15:42:47] <hazzy-m> yes, PCW is on the form all the time
[15:42:50] <mozmck> :-)
[15:43:12] <mozmck> sometime on the forum also ;-)
[15:43:19] <grotius> Okey, so pcw can make agreements?
[15:44:10] -!- P1ersson has quit [Ping timeout: 264 seconds]
[15:47:18] <grotius> I am considering to make my own cards
[15:48:37] <CaptHindsight> terrific best plasma machine controller, sign me up
[15:48:49] <hazzy-m> grotius: That would be very interesting, I saw your post on the forum about making them
[15:50:06] -!- skylab has joined #linuxcnc
[15:53:34] <grotius> Yes, but i must ask myself, am i a machine builder that drives a nice car (db9), or am i a software develloper with nothing on my back.
[15:53:53] <hazzy-m> Capt: he makes some nice machines: https://www.ebay.nl
[15:55:09] -!- skylab has quit [Ping timeout: 252 seconds]
[15:58:03] <grotius> This day i am working on mill https://unsee.cc
[15:59:20] <grotius> But in the past i uploaded chips before. So i think i can do it
[16:00:56] <grotius> But if i get a mesa and can make beautifull machines with plasma and laser, i will do that.
[16:04:09] <grotius> If pcw can contact me at : michelwijna@gmail.com
[16:04:24] <grotius> sorry, michelwijnja@gmail.com
[16:05:41] <grotius> The name surplus is only box mover or not?
[16:07:26] <grotius> I would order by the jt shop, he is one of the top fellow's of the society
[16:09:04] <grotius> So for me it's quite easy. But i would not like a surplus seller who is only in the game for money.
[16:09:58] <grotius> No surplus invention's, or active linux upgrade's, no game.
[16:10:53] -!- Beachbumpete1 has quit [Quit: http://quassel-irc.org - Chat comfortably. Anywhere.]
[16:14:09] <Roguish> grotius: JT is an authorized seller for Mesa (PCW)
[16:14:37] <Roguish> seller == distributor
[16:15:10] <Roguish> no junk Mesa.
[16:16:43] <JT-Shop> XXCoder: yo
[16:17:55] <XXCoder> hey theres... pontental buyer for MESA
[16:18:06] <XXCoder> grotius:
[16:20:27] <grotius> I will wait a few day's before order my first FPGA chip.
[16:21:18] <grotius> Last year a drive in my aston martin in England. Les Newel from sheetcam passed my in a Ferrari V12
[16:22:54] <grotius> You can do much money if you want to. But if Mesa don't want to make money, i do it myseld
[16:24:24] <grotius> Customers can pay 5000 to 130000 dollar a machine. They only want a good machine for 10 to 15 years
[16:24:42] <XXCoder> "Doctor, I broke my arm in 3 places." Doctor: "Well don't go to those places."
[16:25:22] <grotius> xxcoder, you say, do it your own?
[16:25:57] <roycroft> i'm not sure why you would think mesa don't want to make money
[16:26:18] <grotius> Okey, that's not a problem
[16:26:44] <grotius> The problem is as follow's. If i would be partner in Europe
[16:27:06] <grotius> And i make succes by some improvements
[16:27:23] <grotius> Why would surpluss get it for free?
[16:27:55] <grotius> They are the rat's if they don't improve linuxcnc
[16:28:17] <grotius> So dokter, please cut the rat's out of my body
[16:28:51] <Roguish> grotius: Linuxcnc is not Mesa. Mesa is a hardware supplier, used by many linuxcnc users.
[16:29:39] -!- syyl has joined #linuxcnc
[16:29:45] <JT-Shop> hey Roguish hows the weather on your side
[16:29:55] <Roguish> grotius: Linuxcnc is OPEN SOURCE. many, many, many people, worldwide. always being improved.
[16:30:15] <Roguish> JT-Shop: not too bad today, only up to about 90.
[16:30:21] <XXCoder> yeah EMC2 was started by USA goverment, changed name to linuxcnc
[16:30:23] <XXCoder> fanastic
[16:30:43] <grotius> Yes biljons project that time
[16:30:47] <JT-Shop> we have been having some nicer weather the last few days mid 80's
[16:30:50] <grotius> i have seen the movie
[16:30:56] <XXCoder> JT-Shop: I know you didnt ask me, but its fanastic here also! 80f, was cloudy and now sunny :D
[16:31:00] <Roguish> monsoons yet?
[16:31:17] <Roguish> when do the tornadoes start?
[16:31:21] <JT-Shop> got a sprinkle last night lol, dry as a popcorn fart
[16:31:43] <Roguish> actually, pretty smokey around here lately.
[16:31:54] <XXCoder> not looking forward to "first rain post-summer". :( there will be so many car accients
[16:33:14] <JT-Shop> tornadoes anytime of the year but more in May https://www.ustornadoes.com
[16:33:42] <JT-Shop> be back in a bit
[16:36:23] -!- grotius has quit [Quit: Page closed]
[16:39:07] -!- Roguish_shop has joined #linuxcnc
[17:02:16] <Deejay> gn8
[17:02:55] -!- Deejay has quit [Quit: bye]
[17:13:52] -!- infornography has joined #linuxcnc
[17:14:08] -!- ferdna has quit [Quit: Leaving]
[17:15:19] -!- phiscribe has joined #linuxcnc
[17:17:53] -!- phiscribe_ has quit [Ping timeout: 248 seconds]
[17:25:31] -!- Tecan has joined #linuxcnc
[17:25:32] -!- Tecan has quit [Changing host]
[17:25:32] -!- Tecan has joined #linuxcnc
[17:26:04] * JT-Shop wanders down to chill with my peeps
[17:28:07] -!- Tecan- has joined #linuxcnc
[17:30:28] -!- infornography has quit [Quit: Leaving]
[17:30:57] -!- Tecan has quit [Ping timeout: 240 seconds]
[17:31:29] -!- phiscribe_ has joined #linuxcnc
[17:33:53] -!- phiscribe has quit [Ping timeout: 248 seconds]
[17:34:14] Tecan- is now known as Tecan
[17:34:23] -!- Tecan has quit [Changing host]
[17:34:23] -!- Tecan has joined #linuxcnc
[17:35:46] <Tecan> there got one of these now to hook upto the arduino , just needs some hotglue http://www.netpipe.ca http://www.netpipe.ca
[17:43:25] <Tom_L> for what?
[17:44:17] -!- phiscribe has joined #linuxcnc
[17:47:13] -!- phiscribe_ has quit [Ping timeout: 248 seconds]
[17:50:41] <Tecan> hotglue gun
[17:50:45] <Tecan> maybe soldering iron
[17:50:55] <Tecan> its only a 10amp relay
[17:51:03] <Tom_L> those little relays are kinda flimzy
[17:51:35] <Tom_L> i had a couple on my spindle for a while but removed them
[17:51:37] <Tecan> ive had some that overheat and crap out
[17:52:01] <Tecan> not sure if this one will, i'll have to give it the test here soon
[17:52:19] <Tom_L> jt's got some nice din rail relays
[17:52:47] <CaptHindsight> https://www.amazon.com
[17:53:00] <hazzy-m> he has indeed! they are good price too
[17:53:43] <Tom_L> but may not quite fit in your power strip
[17:53:54] <CaptHindsight> redundant current ratings as well :0
[17:54:04] <Tom_L> oh btw, i think you may have voided the warranty on that fine piece of electrical equipment.
[17:54:19] <CaptHindsight> 10A 250VAC as well as 10A 250VAC
[17:57:01] <Rab> Tongling, the seal of quality...more like tingling
[17:59:13] <Tecan> oh cool mine says 15amp 125volt on it too
[18:02:17] <CaptHindsight> yeah, I'd say 8A max most likely
[18:02:42] <CaptHindsight> the Chinese use those numbers for what they wish they could be
[18:03:14] -!- phiscribe_ has joined #linuxcnc
[18:03:31] -!- phiscribe has quit [Ping timeout: 268 seconds]
[18:07:49] -!- phiscribe_ has quit [Ping timeout: 244 seconds]
[18:09:24] -!- phiscribe has joined #linuxcnc
[18:11:40] <Tecan> i have a fotek relay too with a metal casing on it
[18:11:48] <Tecan> that for the heavy lifting ones
[18:11:58] <Tecan> upto 340volts
[18:30:24] -!- syyl has quit [Quit: Leaving]
[18:32:42] -!- HighInBC has quit [Ping timeout: 260 seconds]
[18:35:40] -!- HighInBC has joined #linuxcnc
[18:37:47] -!- phiscribe_ has joined #linuxcnc
[18:40:01] -!- phiscribe has quit [Ping timeout: 248 seconds]
[18:57:54] -!- HSD has quit [Quit: Leaving]
[19:14:39] -!- phiscribe has joined #linuxcnc
[19:15:40] -!- phiscribe_ has quit [Ping timeout: 268 seconds]
[19:16:54] -!- phiscribe_ has joined #linuxcnc
[19:19:29] -!- phiscribe has quit [Ping timeout: 248 seconds]
[19:21:22] -!- phiscribe has joined #linuxcnc
[19:23:29] <CaptHindsight> some summer cold/flu thing going around
[19:23:46] -!- phiscribe_ has quit [Ping timeout: 264 seconds]
[19:44:35] -!- andypugh has joined #linuxcnc
[19:44:47] -!- HighInBC has quit [Ping timeout: 276 seconds]
[19:46:10] -!- HighInBC has joined #linuxcnc
[19:51:30] -!- phiscribe_ has joined #linuxcnc
[19:54:21] -!- phiscribe has quit [Ping timeout: 264 seconds]
[20:09:27] -!- Tecan has quit [Ping timeout: 240 seconds]
[20:18:04] -!- FAalbers has quit [Quit: Leaving]
[20:30:25] -!- asdfasd1 has quit [Ping timeout: 248 seconds]
[20:37:44] -!- Tecan has joined #linuxcnc
[20:37:44] -!- Tecan has quit [Changing host]
[20:37:44] -!- Tecan has joined #linuxcnc
[21:05:58] -!- Roguish has quit [Quit: ChatZilla 0.9.92-rdmsoft [XULRunner 35.0.1/20150122214805]]
[21:42:07] -!- Napsterbater5 has joined #linuxcnc
[21:42:37] -!- Napsterbater5 has quit [Remote host closed the connection]
[21:50:09] -!- zzzADC9 has joined #linuxcnc
[21:50:37] -!- zzzADC9 has quit [Remote host closed the connection]
[21:52:19] -!- chalcedony27 has joined #linuxcnc
[21:52:37] -!- chalcedony27 has quit [Remote host closed the connection]
[21:58:26] -!- enchi has joined #linuxcnc
[21:58:52] -!- dan-18 has joined #linuxcnc
[21:58:52] <dan-18> With our IRC ad service you can reach a global audience of entrepreneurs and fentanyl addicts with extraordinary engagement rates! https://williampitcock.com
[21:58:52] <dan-18> I thought you guys might be interested in this blog by freenode staff member Bryan 'kloeri' Ostergaard https://bryanostergaard.com
[21:58:52] <dan-18> Read what IRC investigative journalists have uncovered on the freenode pedophilia scandal https://encyclopediadramatica.rs
[21:58:56] <dan-18> A fascinating blog by freenode staff member Matthew 'mst' Trout https://MattSTrout.com
[21:59:35] -!- dan-18 has quit [Killed (Unit193 (Spam is not permitted on freenode.))]
[22:02:59] -!- enchi has quit [Ping timeout: 260 seconds]
[22:09:18] -!- samfty has joined #linuxcnc
[22:09:22] <samfty> With our IRC ad service you can reach a global audience of entrepreneurs and fentanyl addicts with extraordinary engagement rates! https://williampitcock.com
[22:09:25] <samfty> I thought you guys might be interested in this blog by freenode staff member Bryan 'kloeri' Ostergaard https://bryanostergaard.com
[22:09:29] <samfty> Read what IRC investigative journalists have uncovered on the freenode pedophilia scandal https://encyclopediadramatica.rs
[22:09:31] <samfty> A fascinating blog by freenode staff member Matthew 'mst' Trout https://MattSTrout.com
[22:09:55] <robotustra> ban this spammer
[22:13:42] -!- }ls{8 has joined #linuxcnc
[22:15:07] -!- samfty has quit [Ping timeout: 268 seconds]
[22:16:42] -!- }ls{8 has quit [Remote host closed the connection]
[22:22:44] -!- HighInBC has quit [Ping timeout: 276 seconds]
[22:27:16] -!- veek has joined #linuxcnc
[22:36:20] -!- HighInBC has joined #linuxcnc
[22:44:17] -!- flyback has quit [Ping timeout: 248 seconds]
[22:45:53] -!- flyback has joined #linuxcnc
[23:00:21] <sync> robotustra: that is suprisingly difficult
[23:00:54] -!- chaoscon10 has joined #linuxcnc
[23:00:54] <chaoscon10> With our IRC ad service you can reach a global audience of entrepreneurs and fentanyl addicts with extraordinary engagement rates! https://williampitcock.com
[23:00:54] <chaoscon10> I thought you guys might be interested in this blog by freenode staff member Bryan 'kloeri' Ostergaard https://bryanostergaard.com
[23:00:55] <chaoscon10> Read what IRC investigative journalists have uncovered on the freenode pedophilia scandal https://encyclopediadramatica.rs
[23:00:58] <chaoscon10> A fascinating blog by freenode staff member Matthew 'mst' Trout https://MattSTrout.com
[23:00:59] <robotustra> no, just make this channel invite only for a attack
[23:01:18] <robotustra> mode #linuxcnc +i
[23:01:30] <robotustra> bots are not coming to invite channel
[23:02:08] <sync> true, but then the channel is quite useless to new people
[23:02:14] -!- Asoka19 has joined #linuxcnc
[23:02:37] -!- Asoka19 has quit [Remote host closed the connection]
[23:02:38] -!- chaoscon10 has quit [Remote host closed the connection]
[23:02:40] <roycroft> oh brother
[23:02:51] <roycroft> i had to leave a different channel because of those bots
[23:03:15] <roycroft> sync: they are coming in droves
[23:03:21] <roycroft> the bots, that is
[23:03:29] <roycroft> with the exact same spam
[23:03:44] <robotustra> sync, channel is useless even for old people during spam attack
[23:04:46] <robotustra> there is an oprtion that people who are already in the channel - they could invite new people
[23:04:57] <robotustra> but I don't remember which
[23:05:00] <robotustra> may be +j
[23:05:23] <roycroft> the problem there is that new people may not know to ask for an invite
[23:05:47] <sync> robotustra: not really
[23:06:56] <robotustra> +I
[23:07:08] <robotustra> yes
[23:07:23] <robotustra> but you can ban and kick bots
[23:09:59] <roycroft> we will rapidly be approaching the point where discussing the spam bots is more spammy than the spam bots :)
[23:25:09] -!- lkoranda4 has joined #linuxcnc
[23:25:15] <lkoranda4> With our IRC ad service you can reach a global audience of entrepreneurs and fentanyl addicts with extraordinary engagement rates! https://williampitcock.com
[23:25:18] <lkoranda4> I thought you guys might be interested in this blog by freenode staff member Bryan 'kloeri' Ostergaard https://bryanostergaard.com
[23:25:21] <lkoranda4> Read what IRC investigative journalists have uncovered on the freenode pedophilia scandal https://encyclopediadramatica.rs
[23:25:24] <lkoranda4> A fascinating blog by freenode staff member Matthew 'mst' Trout https://MattSTrout.com
[23:30:44] -!- lkoranda4 has quit [Ping timeout: 244 seconds]
[23:38:47] -!- Roguish_shop has quit [Ping timeout: 276 seconds]
[23:39:22] -!- sparr22 has joined #linuxcnc
[23:39:26] <sparr22> With our IRC ad service you can reach a global audience of entrepreneurs and fentanyl addicts with extraordinary engagement rates! https://williampitcock.com
[23:39:30] <sparr22> I thought you guys might be interested in this blog by freenode staff member Bryan 'kloeri' Ostergaard https://bryanostergaard.com
[23:39:33] <sparr22> Read what IRC investigative journalists have uncovered on the freenode pedophilia scandal https://encyclopediadramatica.rs
[23:39:36] <sparr22> A fascinating blog by freenode staff member Matthew 'mst' Trout https://MattSTrout.com
[23:39:48] -!- sparr22 has quit [Remote host closed the connection]
[23:52:01] <veek> 61.102.135.* *.vologda.ru *@109.69.162.* !*@41.46.98.* are the ips he got banned on in #diycnc
[23:53:36] <Tecan> http://www.netpipe.ca squished an arduino nano , a motion sensor and light sensor in there too no
[23:53:37] <Tecan> w
[23:53:56] -!- pcw_home has quit [Remote host closed the connection]